Error DistributedCOM id 10010

Start up log this error: Error
Distributed COM id10010; (Delivery Optimization,
the service is set delayed startup )The
server{5B99FA76-721C-423C-ADAC-56D03C8A8007}did
not register with the DCOM
Within the timeout required.
TH

Hi,
Same problem and same symptoms here though it was not so obvious until late december.
I'll add to that :
- recycle bin windows created but bot populated (appears as an icon while switching windows with alt+tab. same for run windows (windows+R) and probably others,
- sometimes repainting occurs with wrong character attrributes (bold instead of normal for windows explorer detail view for instance),
- onedrive folder popping up several times by its own will.
There is no obvious cpu, GDI or physical/virtual memory depletion, the number of handles is normal.
I have to kill windows explorer so that everything goes back into a more normal way... for a time.
- Guillaume

Similar Messages

Update-Help error when console application is run in remote machine via PS remoting

Hello,
When I execute a particular console application in a remote machine via PS remoting, I get an error related to update-help. When I execute it directly on the remote machine, it works...
My code:
$credential = Get-Credential -Credential "DomainName\AccountName"
$session = New-PSSession -ComputerName "MachineName" -Authentication Credssp -Credential $credential;
Invoke-Command -session $session -ScriptBlock {
try{
cd <network share location>
.\theConsoleApp.exe | Out-File C:\console-output.txt
$error | Out-File C:\console-error-output.txt
$exitCode
} catch {
throw $error
Error seen in the console:
NetNat, PcsvDevice, PSDesiredStateConfiguration, SoftwareInventoryLogging, StartScreen, TLS, WindowsSearch' with UI culture(s) {en-US} : Unable to retrieve the HelpInfo XML file for
UI culture en-US. Make sure the HelpInfoUri property in the module manifest is valid or check your network connection and then try the command again.
$error variable from above:
Errored out (exit code 1603) with error message: ErrorId 10010: Xpatch threw an unexpected exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
I’ve tried
two different user accounts
multiple file share locations
different OSs
different target servers
but have not determined the cause of the error.
I would appreciate any help on this.
-Rohan.

Clearly the remote EXE cannot run in that context. YOU should not run that program remotely.
I suspect there is also information you are not giving to us.
¯\_(ツ)_/¯

Computer randomly hangs

Hello,
I'm experiencing random freezes in Windows 8.1.
This is the last even recorded by my system,
DistributedCOM ID 10010
The server (BF6C1E47-86EC-4194-9CE5-13C15DCB2001) did not register within required timeout
It's a fairly new computer and it has a clean install of Windows 8.1 on it.
I've installed the latest Windows and driver software for my hardware.
These are my specs
M/B :Gigabyte P67A-UD7-B3 (BIOS versie F7)
CPU  :Intel i7 2600k
GPU  :HD Radeon 6970 GDDR5 (2x 2 GB)
PSU  :Corsair HX850
RAM :Corsair Vengeance 16 GB DDR3 (4 x 4 GB)
SPU  :E-MU 1010 PCI (1616m) soundcard
OS    :Windows 8.1 PRO_NL
I have some information that could be valuable in solving this problem.
I had two of the same video cards in my computer before, but after installing an extra PCI soundcard it, sometimes one of them didn't work.
It would either not show up in the device manager, or the device manager exclamation mark saying that there are no
resources left for the IRQ (or something simmilar like that)
I've tried to update the BIOS and reset it to its default values and installed a clean copy of Windows 8.1.
Nothing worked.
I later decided to remove the video card, it was an overkill anyway.
Since then it hasn't shown... but I experience hangs ups once in a while.
I have confirmed that the PCI sound card is working perfectly in Windows 8.1 on my old system.
I think it might have something to do with the IRQ, still.
Can someone please help me figure this out.
I need a stable computer for my home studio work.
Thanks in advance!

Hi FadingMusic,
"Since then it hasn't shown... but I experience hangs ups once in a while."
Do you mean this issue occur after we remove the video card ? Have you tried to update the video card driver from the device manager ?If it is possible ,it is recommended to download the driver from manufacturer website.
Have you checked task manager whether there is a process occupying much system resources when the system freezes ?
For the logs in the Event Viewer ,please disable the two taks "IdleSync Maintenance Task " ,"RoutineMaintenance Task "from the taks schedule in this path \Microsoft\Windows\SkyDrive\ and then have a check .
Here is a link for reference of the similar issue :
Daily Errors in the System Event Log
https://social.technet.microsoft.com/Forums/windows/en-US/51824445-0b2c-4049-bf9e-287bb8da0549/daily-errors-in-the-system-event-log?forum=w8itprogeneral
To get a better performance of windows,please always keep it update to date .
1.Swipe from the right or press the Windows + C key. Tap or click the Search charm, and then type Windows Update.
2.Tap or click Settings, and then select Install optional updates.
3.When the Windows Update control panel opens, click Check for Updates on the top left corner to receive a list of available updates for your PC.
Best regards

Windows 7 64 Bit BSOD regarding winsrv.dll

Hi there,
We have got a high number of Windows 7 Enterprise 64 bit machines randomly goingot into BSOD at boot up. The message at the Blue Screen is:
Stop:c0000142 {DLL INITIALIZATION FAILED}
Initialization of the Dynamic Link Library winsrv.dll failed. The process is terminating abnormally
In most cases we can recover the machine by going through Last Known Good Profile. Some machines were not so lucky and a re-image is required.
On the machines that I was able to recovered. I looked at the Windows System Log and I could see these errors:
Event ID:10010
DCOM got error "206" attempting to start the service TrustedInstaller with arguments "" in order to run the server:
{752073A1-23F2-4396-85F0-8FDB879ED0ED}
Event ID: 7000
The Windows Modules Installer service failed to start due to the following error:
The filename or extension is too long.
Also I can't see anything installed from the system log.
Like I said Last Known Good Profile would let me recover the machine but some time after a couple of days the machine will blue screen again and again I had to use Last Known Good Profile.
Anyone would have any idea what has caused that please?
I had tried the followings with no avail:
1. Scandisk did not find anything
2. Windows Startup Repair failed to find any problem
3. Virus scanned with NOD32 and Malwarebyte (with the hard drive out hooked up to other machine) and again nothing was found.
Thanks,
Edmond.

Hello,
please use Microsoft Skydrive to upload dump files (%systemroot%\minidumps like c:\windows\minidumps) and post a link here.
If you want to read dump files without my help, use Windbg and refer to this Microsoft article:
http://support.microsoft.com/kb/315263
You can also contact Microsoft CSS.
You can start by running sfc /scannow
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner
Microsoft Certified Professional
Microsoft Certified Systems Administrator: Security
Microsoft Certified Systems Engineer: Security
Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

DistributedCOM Event ID 10010 on Windows 2008 R2

Hi,
I'm getting following error on one of my Virtual Windows 2008 R2 server and have tried lots of solutions but still this event logging on my server.
The GUID mentioned in the event is related to Virtual Disk Service and I have verified all security permission related setting in component services as well as in Windows Registry but no luck yet.
Please help to resolve this issue.
Following are the event details:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 19/04/2013 9:02:54 PM
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: ExchangeSVR.Gen3Com.local
Description:
The server {7D1933CB-86F6-4A98-8628-01BE94C9A575} did not register with DCOM within the required timeout.
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="49152">10010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-04-19T11:02:54.000000000Z" />
<EventRecordID>133132</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>ExchangeSVR.Gen3Com.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">{7D1933CB-86F6-4A98-8628-01BE94C9A575}</Data>
</EventData>
</Event>
Thanks,

Hi Thakur,
I believe, this thread may help to fix DCOM issue.
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/8c292062-64f2-4c1a-8c50-13ababb67738/
Regards, Ravikumar P

DCOM error - 10010 - Server 2008 R2 Standard

My server is generating a DCOM error with GUID : 995C996E-D918-4A8C-A302-45719A6F4EA7
I did some research and found that this should be due to Auto play being enabled, I disabled it and restarted the server but the DCOM event is still happening.
Another DCOM event is also generated by GUID B286F068-5B17-4AE8-989B-8F9A199C47BA which refer to an HP printer DLL, no one is having any issue with the printer so wondering why it is logging that event.
Any idea ?
Thanks

Hi,
Regarding to Event ID: 10010 Source: DCOM, please refer to the following thread. It provided the possible causes
of DCOM Event ID 10010.
DistributedCOM Error ID 10010
http://social.technet.microsoft.com/Forums/windowsserver/en-US/77b1db1d-f186-4515-8f7d-2241942eb9b7/distributedcom-error-id-10010?forum=winservergen
Based on current situation of this problem, please use
sfc /scanfile command to scans integrity of this specified DLL file. And then check the printer and make sure that install exactly the right drivers. Meanwhile, please find if can update
the printer driver.
By the way, you can use
regsvr32 <filename> command to re-register the DLL file. Then please monitor if the Event ID 10010 still persists.
Hope this helps.
Best regards,
Justin Gu

I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message: [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message: [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
Never had any issues before now... any ideas?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

GarageBand Error -10010

I hardly use my MacBook Pro, though it does have all my main apps on it. I used it to record vocals singing over music played by another computer before with no problem, but today when I tried recording and playing back, the error kept popping up to say my MBP is too slow and asked me to check out Apple's Help to optimizing GarageBand. All the suggested methods + googled methods didn't work, so I deleted and reinstalled GarageBand. It STILL had the same problem, except now it added the Error code 10010 or something like that. If I exported it to listen to it via iTunes, I could play it back fully (unlike in GB), but there was a "compressing" **** noise throughout the whole track.
I am recording onto my INTERNAL DISK not using any extra disks. Tried all methods since 2009 articles (same problems for them...) but to no avail.
My MBP is OSX 10.9, 2.9 GHz Intel Core i7, 16GB MHz DDR3.
What is the problem and how could I solve it? I've deleted A LOT of stuff on my computer and emptied the trash, and the same problems still occur.
Thanks in advance!

i having the same problem too.. this had impacted my whole working environment after upgraded into OSX. Typing also choppy, video playback also choppy.. i don't see anything good on this OSX so far on my MBP mid 2012. sad sad sad

DCOM errors ID: 10010

Hello,
I was checking on my "event viewer" and I found tons of errors DCOM related, all of them have as the event id: 10010.
Checking for details is not only related to one application only but several:
The server App.AppX54xz6wnkhmw763c2y8tb018n7d71dtx7.wwa did not register with DCOM within the required timeout.
The server AppexNews.AppXm7hnj7tzqqzrmb6spmf0x4fb91edcc71.mca did not register with DCOM within the required timeout.
The server Microsoft.WindowsLive.Mail.AppXj3e9v0xw9sf8t58nqr15tqqb2yq4zsfg.mca did not register with DCOM within the required timeout.
The server AppexSports.AppXzwt95zf827jx8vevssdmkdacbwrgjgeb.mca did not register with DCOM within the required timeout.
... and much, much more different apps getting the same error.
Runing the Windows 8.1 pro x64

Hello, none of the errors have something to do with the display of ASP pages, it's related to specific applications like:
The server Microsoft.WindowsLive.Mail.AppXj3e9v0xw9sf8t58nqr15tqqb2yq4zsfg.mca did not register with DCOM within the required timeout.
The server AppexSports.AppXzwt95zf827jx8vevssdmkdacbwrgjgeb.mca did not register with DCOM within the required timeout.
The server AppexNews.AppXm7hnj7tzqqzrmb6spmf0x4fb91edcc71.mca did not register with DCOM within the required timeout.
The server App.AppX54xz6wnkhmw763c2y8tb018n7d71dtx7.wwa did not register with DCOM within the required timeout.
... and many many others. A thing that occurs every few minutes is the explorer restarts and when I check the event log, the DCOM errors are only ones that appear at that specific time.

Error 10010 CoreAudio

Hi!
I've got a session of 32 tracks (I've had much more before), 8 audiotracks and 24 audioinstruments.
When I try to play the song the moment everything comes together Logic stops and I get "CoreAudio error 10010 disk too slow or System Overload".
My audio prefrences are : i/o buffersize 1024
proces buffer range LARGE
I've also changed the settings but it still stopped at the climax...
Can anyone give me advice?
Thanks in advance

Blay-
Ive seen you answer on other threads. Do you have any other advice re: CORE AUDIO SYSTEM OVERLOAD (-10011) ? You seem to say to get another hd on the other threads as well.
I have two (2) G-DRIVE Q's hooked up to a SONNET TEMPO SATA EXPRESS CARD. I have 2 gig of ram, running 10.4.10 and Logic 7.2.3. I shouldnt be having this issue of "core audio system overload". My 500 gig G-Drives have all my media- my internal hd's are just running Logic. My plug-ins are on the ext G-Drives as well. My M-Audio Firewire 410 is on a seperate buss than the ext G-Drive hard
drives so that shouldnt be the issue. I keep reading peoples responses but they arent so true. Do you have any other words of wisdom or insight on this matter hearing my setup? Im just trying everything I can to figure this out.
Thanks

DistributedCOM errors from Reporting Services server on Primary

I have a SCCM 2012 SP1 CU4 environment with a dedicated Reporting Services server next to my Primary.
On the primary i see in the system event viewer every hh:31 2 alerts and every hh:01 about 15 alerts and i can't find how to stop these alerts. The SCCM environment is working properly, als reporting is working properly..but how to solve these erros in my
system event log on the primary server.
Below the error:
The description for Event ID 10009 from source Microsoft-Windows-DistributedCOM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
<reportingserver fqdn>

Hi,
Please try the troubleshooting suggestions the following TechNet article provides.
Event ID 10009 — COM Remote Service Availability
http://technet.microsoft.com/en-us/library/cc774368(WS.10).aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Event ID 10016 - DCOM Error | Source - Microsoft-Windows-DistributedCOM | Level: Error

Hi there... I am getting the above mentioned error with the
Description: dows-DistributedCOM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Full message is -
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          5/15/2012 1:18:44 PM
Event ID:      10016
Task Category: None
Level:         Error
Keywords:      Classic
User:          NT AUTHORITY\IUSR
Computer:      Server.domain.com
Description:
The description for Event ID 10016 from source Microsoft-Windows-DistributedCOM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
application-specific
Local
Activation
{2D527A8C-A4B6-4E74-A63F-E867360D401C}
{B13EFBAE-7504-4938-9ED7-8E8B53E51221}
NT AUTHORITY
IUSR
S-1-5-17
LocalHost (Using LRPC)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="49152">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-05-15T19:18:44.000000000Z" />
    <EventRecordID>43121</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>Server.Domain.com</Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="param1">application-specific</Data>
    <Data Name="param2">Local</Data>
    <Data Name="param3">Activation</Data>
    <Data Name="param4">{2D527A8C-A4B6-4E74-A63F-E867360D401C}</Data>
    <Data Name="param5">{B13EFBAE-7504-4938-9ED7-8E8B53E51221}</Data>
    <Data Name="param6">NT AUTHORITY</Data>
    <Data Name="param7">IUSR</Data>
    <Data Name="param8">S-1-5-17</Data>
    <Data Name="param9">LocalHost (Using LRPC)</Data>
</EventData>
</Event>
Please let me know any solutions to fix....
Steps, I did try from one of the blogs -
Open Component Services. Got oStart --> Control Panel --> Administrative Tools --> Components Services. Expand the Component Services branch then expand Computers, My Computer and DCOM Config. Right-click on "sms agent host" (my case) and click
Properties. Click on the Security tab and under “Launch and Activation Permissions” select "edit" and add user Local Service (Local lunch). Click OK, close the Component Services window.
In the Launch Permission dialog box, make sure that the Everyone group has Remote Launch and Remote Activation permissions.
In the Launch Permission dialog box, make sure that the SMS Reporting Users local group has following permissions:
Local Launch / Remote Launch / Local Activation / Remote Activation
Also added Remote Launch / Remote Activation permission for Network Service (for the SMS_Reporting_Point)
Added Admin Group to the "ConfigMgr Remote Control Users"
VT

In addition, In the security policy the ‘Local Service’ need to be configured for the following Policies
- Generate security audits
- Create global objects
- Replace a process level token
- Adjust memory quotas for a process
- Impersonate a client after authentication
- Log on as a service
- Bypass traverse checking
Hope this helps.
Regards,
Yan Li
hi,
i m having similiar error but with another APPID
i did what u said in 1st part but i couldnt get what u mean in additional settings ? i couldnt do that.
Error details :
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 7/2/2013 4:03:20 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: LOCAL SERVICE
Computer: THINK
Description:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{7160A13D-73DA-4CEA-95B9-37356478588A}
and APPID
{7160A13D-73DA-4CEA-95B9-37356478588A}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-02-07T14:03:20.356793400Z" />
<EventRecordID>1465</EventRecordID>
<Correlation />
<Execution ProcessID="868" ThreadID="2832" />
<Channel>System</Channel>
<Computer>THINK</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData>
<Data Name="param1">machine-default</Data>
<Data Name="param2">Local</Data>
<Data Name="param3">Activation</Data>
<Data Name="param4">{7160A13D-73DA-4CEA-95B9-37356478588A}</Data>
<Data Name="param5">{7160A13D-73DA-4CEA-95B9-37356478588A}</Data>
<Data Name="param6">NT AUTHORITY</Data>
<Data Name="param7">LOCAL SERVICE</Data>
<Data Name="param8">S-1-5-19</Data>
<Data Name="param9">LocalHost (Using LRPC)</Data>
<Data Name="param10">Unavailable</Data>
<Data Name="param11">Unavailable</Data>
</EventData>
</Event>

W530 DistributedCOM/Location Task Manager Error Event

HI
After installing Lenovo Settings Dependency Package and Lenovo Power Management Driver on clean installed Windows 8, I started to see error notifications on every boot.
DistributedCOM:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{7160A13D-73DA-4CEA-95B9-37356478588A}
and APPID
Unavailable
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Location Task Manager:
1.
(PerformTasks()): Failed to retrieve LocalState folder. Please check if Lenovo Settings is properly installed.
2.
(GetHomepage()): Failed to open preferences file for Mozilla Firefox. Check if it is properly installed.
3.
(InitAgent()): Failed to retrieve LocalState folder. Please check if Lenovo Settings is properly installed.

Although have that problem on E330.

Process flow: validation error: VLD-10010

OWB 10.2 process flow: I simply put a mapping in a process flow between the START and END activity and want to validate it.
But I get the error:
"VLD-10010: MAP_TEMP_POS's bound object null of type null?? has been deleted."
The mapping itself is alread deployed and the error is the same with other mappings.
Workflow is installed and owf_mgr user is registered as data warehouse target schema.
What can I try?

Problem solved.
Mappings should be dragged vom Explorer: "Available Objects"
into Process flow.

CS6: DistributedCOM Error id: 10016 when open pdf from web page in Win8.1

For example here below I've got the issue:
http://modemwifi.it/wp-content/uploads/asus-dsl-n55u.pdf
Adobe Acrobat X pro V 10.1.8:
DistributedCOM Error id: 10016 when open pdf from web page.
Nome registro: System
Origine:       Microsoft-Windows-DistributedCOM
Data:          04/11/2013 19:09:19
ID evento:     10016
Categoria attività:Nessuna
Livello:       Errore
Parole chiave: Classico
Utente:        PC-PIERO\Piero
Computer:      Pc-Piero
Descrizione:
Le impostazioni delle autorizzazioni impostazioni predefinite del computer non concedono l'autorizzazione di Attivazione in Locale per l'applicazione server COM con CLSID
{B801CA65-A1FC-11D0-85AD-444553540000}
e APPID
{2EAF0840-690A-101B-9CA8-9240CE2738AE}
all'utente Pc-Piero\SID Piero (S-1-5-21-3453328585-262132574-2759341577-1001) dall'indirizzo LocalHost (tramite LRPC) in esecuzione nel SID del contenitore di applicazioni Non disponibile (S-1-15-2-1430448594-2639229838-973813799-439329657-1197984847-4069167804-1277922394). Per modificare tale autorizzazione di sicurezza, è possibile utilizzare lo strumento amministrativo Servizi componenti.
XML evento:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-04T18:09:19.468877700Z" />
    <EventRecordID>14806</EventRecordID>
    <Correlation />
    <Execution ProcessID="768" ThreadID="776" />
    <Channel>System</Channel>
    <Computer>Pc-Piero</Computer>
    <Security UserID="S-1-5-21-3453328585-262132574-2759341577-1001" />
</System>
<EventData>
    <Data Name="param1">impostazioni predefinite del computer</Data>
    <Data Name="param2">Locale</Data>
    <Data Name="param3">Attivazione</Data>
    <Data Name="param4">{B801CA65-A1FC-11D0-85AD-444553540000}</Data>
    <Data Name="param5">{2EAF0840-690A-101B-9CA8-9240CE2738AE}</Data>
    <Data Name="param6">Pc-Piero</Data>
    <Data Name="param7">Piero</Data>
    <Data Name="param8">S-1-5-21-3453328585-262132574-2759341577-1001</Data>
    <Data Name="param9">LocalHost (tramite LRPC)</Data>
    <Data Name="param10">Non disponibile</Data>
    <Data Name="param11">S-1-15-2-1430448594-2639229838-973813799-439329657-1197984847-4069167804-1 277922394</Data>
</EventData>
< /Event>
How can I solve this problem?
Thanks

// I got this from an Action (I�m using Struts)
java.sql.Blob file=(java.sql.Blob)request.getAttribute("PDFfile");
String filename=(String)request.getAttribute("filename");
try{
int iLength = (int)(file.length());
response.setHeader("Content-type", "application/pdf");
response.setHeader("Content-Disposition", "inline; filename=\""+filename+"\"");
response.setHeader("Expires","0");
response.setHeader("Cache-Control","must-revalidate, post-check=0, pre-check=0");
response.setHeader("Pragma","public");
response.setContentLength(iLength);
ServletOutputStream os = response.getOutputStream();
InputStream in = null;
in = file.getBinaryStream();
byte buff[] = new byte[1024];
while (true) {
      int i = in.read(buff);
      if (i<0) break;
      os.write(buff,0,i);
os.flush();
os.close();
} catch(Exception ex){
   out.println("Error while reading file : " + ex.getMessage());
}and now it�s running !!! I�m not using response.setContentType(...) and I do this in response.setHeader("Content-type", "application/pdf"). And I use response.setHeader("Content-Disposition", "inline; filename=\""+filename+"\"") instead of response.setHeader("Content-Disposition", "attachment; filename=\""+filename+"\"");

Error DistributedCOM id 10010

Similar Messages

Maybe you are looking for