ERROR: document is corrupt or damaged
RE: iPad Adobe Reader app 10.3 version. I highlighted sections of a phone bill (original bill format is PDF) and when I try to reopen it after closing it, error mesg "This document cannot be opened because it is corrupted or damaged.", pops up.
How do I correct this problem?
Unfortunately, the file cannot be recovered. Also, it would be difficult to ascertain the reason that led to this issue. There was an issue with the previous versions of Adobe Reader that led to some Acrobat.com documents to be corrupted which is fixed in the latest version. Request you to update Adobe Reader to the latest version(11.7.0) available on the Play Store where you won't encounter the issue again.
Thanks,
Adobe Reader Team
Similar Messages
-
This document cannot be opened because it is corrupted or damaged.
Hi There
I have recently created a pdf document in "Expert PDF 7" from "Avanquest". I have inserted certain fields which needs to be completed by the reader for example name, surname etc.
On my desktop, using Windows 7 and Adobe Reader X it works perfectly but, when using my iPad 3 and Adobe Reader it stalls. I can enter the first field but, as soon as I move to the next field the following error appears; "This document cannot be opened because it is corrupted or damaged."
Can someone please assist?
Regards,
MarinusUnfortunately, the file cannot be recovered. Also, it would be difficult to ascertain the reason that led to this issue. There was an issue with the previous versions of Adobe Reader that led to some Acrobat.com documents to be corrupted which is fixed in the latest version. Request you to update Adobe Reader to the latest version(11.7.0) available on the Play Store where you won't encounter the issue again.
Thanks,
Adobe Reader Team -
How to deal with "There was an error opening this document, the file is damaged and could not be"
Hello, everyone:
I open one pdf document with Adobe Reader 9.3, but it appeared that "There was an error opening this document, the file is damaged and could not be repaired".. and I found that another several pdf document in the same folder that I have not opened for a long time is also "damaged and could not be repaired".
But in the same folder, other documents of different types are ok, does that mean there is something wrong with my hard drive?
Has anyone else run into this issue or have any suggestions?
Thank you very muchIt could be that the directory is damaged. It could be that at one time you had a virus that did damage, it is hard to say. Do you have a good backup?
-
Acrobat 11 there was an error opening this document. the file is damaged and could not be repaired
we are receiving an error when opening certain pdfs saying "there was an error opening this document. the file is damaged and could not be repaired"
i've tried a few things to fix this issue with no luck
tried on a brand new windows 7 install without any added software like anti-virus software, etc
tried on my home pc (I forwarded the document from my work pc to my home pc and still receiving the same error)
don't think it's anything related to the computers, thinking it's more an issue with the pdf. i've tried the basics like deleting temp files from IE, going to %temp% and deleting that out, doing an acrobat repair, trying in reader instead of acrobat, updating users from acrobat 10 to 11, and still receiving the same issue. the odd thing is, some people can open this document and some receive the error. the other thing is i've tried alternative pdf programs with no avail, same errors from those as well
i work on the helpdesk with one other person for the company and not sure what else we can try
don't think this is a pc issue - tried on pcs in the company, home pcs, personal pcs and all get this error
got to be an issue with either the pdf, or the way its being sent
i did reach out to OUR e-mail team here (lotus notes admin) and they've ruled out anything as far as an encryption causing the conflict may go, so notes isn't the issue either
would it be possible it's on the persons end that's sending the file?Unfortunately, CR 10.5 is not supported on WIN 2012 Server. See this wiki for more details. In order to work in a supported environment you will have to upgrade to CR 2008 Service pack 7, or SAP Crystal Reports, developer version for Microsoft Visual Studio (2010 / 2012 / 2013).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
There was an error opening this document. the file is damaged and could not
Dear all, I am simpley reading pdf file & producing to browser with this servlet
( which i got this from same forum)
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Isotest2 extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, java.io.IOException
//String file = request.getParameter("file");
String file = new String("d:/xyz.pdf");
if (file != null)
File f = new File(file);
if (f.isDirectory())
//Do something that identifies the file as a directory...
} else
//otherwise, open a stram, and begin the download...
InputStream input = new FileInputStream(f);
response.setContentType("application/pdf");
response.setBufferSize(8192);
response.setHeader("Content-Disposition","attachment; filename=\"" + f.getName() + "\"");
OutputStream output = response.getOutputStream();
int count = -1;
byte[] buffer = new byte[8192];
while((count=input.read(buffer))!= -1)
output.write(buffer, 0, count-1);
output.close();
input.close();
but it is unable to open pdf file giving error
"There was an error opening this document. the file is damaged and could not be reapired"
what is the problem? [ PDF file is not damaged !]
pls help me out
thanksProbably because you aren't writing the last byte read every time through the while loop.
-
Error: "Document could not be saved"
Hi all!
I regularly receive an error, "Document could not be saved", in OS X after a while of usage. It can come after 10 minutes of usage, or after 10 hours of usage. It affects ALL open applications and documents, and doesn't solve with anything but a restart of the entire system. I haven't found any relation to working with any specific application – it seems to happen at random while using any application. And as I said, it affects the entire system and all applications once it happens.
I've also tried this solution (posted elsewhere), but with no luck:
Restart Lion, and Before you hear the chime, hold down Cmd + R, to access Lion Recovery.
Click the Utilities item in the Menu Bar, then click Terminal.
In the Terminal window, type resetpassword and hit Return.
The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
Does anyone know of any other solution to this problem? Or does anyone know the reason for it?
I should also mention that I experienced another problem recently, whereby my computer begun to sometimes (but not always!) show a progression bar at startup. This bar could take between 5-15 minutes to finish. This kept happening for maybe two weeks' time, until finally one day the computer wouldn't startup at all. It would come to show the dark grey Apple logo on the light grey background, and then suddenly shut off before reaching any further. I did a complete wipe out of the hard drive and re-install of the system, and since then haven't experienced the "progression bar"-problem anymore. I read somewhere that this problem could be a sign of harddrive failure or damage, but I still wonder if that is correct. Could the above mentioned "Document could not be saved"-problem also be related to a hard drive damage?
Thanks in advance for your assistance
Regards
AlexThe next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Can't open any pdf - says 'corrupt or damaged file' every time!
Can't open any pdf - says 'corrupt or damaged file'
Were your PDF documents originally the email attachments opened in Apple Mail on your iPad/iPhone? Apple Mail may have corrupted your PDF documents.
Please see Problem #1 in the following FAQ document.
How to avoid known PDF email attachment problems
Unfortunately, you are not able to repair the corrupted/damaged files. However, you can try to reopen PDF attachments using the workaround specified in the FAQ document. -
Hi all,
I'll try to explain the situation and hope anyone can help on it.
I am at a customer with verson 3.1. Thery are using liveoffice and xcelsius and they call webi documents from xcelsius. The strange thing is that after a while the webi document get corrupted, the universe assigned to the document seems to be missing and all the documents give up working. If you copy the universe and reassing the universe to the document it works again.
The errors we are getting are WIS 30270 processDPcommands and also with the API getblob. I have been looking but did not find any solution.
Has anyone faced something like this?
Thanks a lotHi Jaun,
Following information might help you to resolve the issue.
1.Business Objects Enterprise provides thresholds to protect the Web Intelligence report server and the Web Application servers from processing large chunks of binary and character data and avoid crashing.
Maximum Binary File Size: Maximum size of a binary file (for example: PDF, XLSu2026) that can be generated by the Report Server. If a binary file generated from a Web Intelligence document is greater than this limit, the generation is stopped to protect the server and an error is returned. Increase this limit if the server has to generate large binary files (for example, if Info View users view large documents in *.PDF format).
Maximum Character File Size: Maximum size of a text stream (for example: HTML, XML) that will be transferred to the application server. If a text stream sent to the application server is greater than this limit, the generation is stopped to protect the server and an error is returned.
In CMC, under Servers>Web Intelligence Report server, you can possibly set both the above values to 50MB, but you have to ensure that the application server can handle the increased load multiplied by the number of simultaneous connections. If not, it can crash and block all access to applications.
2. Ensure that the Web Application servers have enough memory available to process incoming requests. Usually the -Xmx value for java process is set at 256Mb, which is recommended to be at least 1024Mb or more depending on your Export requirements and application server limitations.
Regards,
Sarbhjeet Kaur -
Error "backup is corrupt or not compatiable".
I recently got my iphone 4 stolen, so I have borrowed my mom's iphone 3gs, but when I try and back it up, it gives me this error " backup is corrupt or not compatiable." How can I get this information back? I have tried uninstalling itunes and reinstalling. I'm not having any luck with this at all. Please help!!!!!!!!!!!!!!!!!!!!!!!!!!
thanks,
lindseyfromkyEven if deleted all the backups shown in iTunes Preferences>Devices, check the actual backup folder on your computer to be sure there isn't one still there that needs to be deleted. You will find them at one of the following locations:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista/7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Mac OS X: ~/Library/Application Support/MobileSync/Backup/ -
Word document became corrupt when attempting to append...
I'm going crazy here. I'm using RoboHelp 4.1 and I am having
an issue with trying to create printed documentation. I was
receiving the error message, 'The Word document became corrupt when
attempting to append a malformed topic.' Then it would say failed
to update 'topic name'. So in trying to fix it I deleted the entire
folder which contained the file where it blew up, and tried
recompiling it. It went past the point where I had removed the
folder and blew up on a topic in the next folder and gave the same
error...so I deleted that folder also. Now it will make it entirely
through the printed documentation process....but at the end of
compiling it, it tells me Failed to Update images....but at least
now it will give me a finished document (it just has a bunch of
dead linked images). Is this an issue that would be cured with an
upgrade to X5 or is this something else that I have not thought of
yet? Any help will be greatly appreciated.Hi, jdammen.
The first thing I suggest is a search of the forums on the
word "malformed" - you are not alone! Seems like the problem can
have multiple causes: one bad topic, a bad style in the CSS, not
enough RAM, some kind of weird invisible running corruption...
The solutions offered seem to fall into general categories -
1) generate with half the topics, then a quarter, etc. to narrow
down and kill the bad topic, 2) change all styles to Normal and see
if printdoc generates correctly, 3) take a copy of the project and
restore it from .hhp (see
Peter Grainge's website for
help), 4) start over.
I'm afraid they all have one thing in common - trial and
error. You're just going to have to slog through this.
BTW, this happens in X5 - I don't think an upgrade will be a
quick solution for you.
Sorry, and good luck.
Elisa -
I just downloaded the adobe reader for android app. It will not open a file sent in email. It says that the document cannot be opened because it is corrupted or damaged. I can open the same file on my desktop using Adobe acrobat standard V 6 and with Adobe Reader X. Any ideas?
it doesn't open some PDFs now, which previous version seemed to have no problem working with. I don't want to waste your time anymore, though I will just leave you with this:
there is free soft out there in Play Market, which can highlight, work in conjunction with Lingvo (or other dictionary shells), providing handy tools for translation, and it can do simple tasks in elegant and spectacular fashion. Meanwhile you guys in Adobe are eager in adding some functionality, which has nothing to do with everyday reading experience, and you focus on god knows what, but a customer.
Just think about it for a moment... I'm done with using your soft, sorry. -
PDF File is Corrupted or Damaged when the Attachment is Opened
Hello,
I have three Similar forms which are triggered from Sales Order, Delivery & Shipment respectively. Now, the requirement is to send the Form Output as PDF Attachment in a mail. But the Problem I am facing is that the Shipment Output goes as PDF attachment and when opened, it is displayed correctly. However, when the Sales Order & Delivery PDFs are sent as attachments, then the Adobe Reader says
"The File is Corrupted or damaged hence cannot be opened". This is the Message I get when processed from the Delivery. For the Sales Order, the Mail Output triggers with an error in SOST.
We have the Mail Ports open during Testing and I am using the latest version of Adobe Reader. Can someone give me any resolution to handle the Damaged PDF File?
Thanks and Regards,
Venkat Phani Prasad KonduriHi Konduri,
check the function module 'CONVERT_OTF' have you passed to the other forms.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN ---> bin_filesize
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Issue smart form output to Email as PDF attachment
Regards,
Sravanthi -
Safari causing Adobe documents to corrupt
Hi,
Has anyone else encountered when using Safari to download and save an Adobe document when I try and open the document syas it is corrupted or damaged. Have latest versions of Safari and Adobe Reader. This probolem NOT occur if I use Firefox.
Any advice
Thanks
RickBack up all data.
Triple-click the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Epson SX218 doesn't print (client-error-document-format-not-supported)
Hi there,
I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
Here's what I've done so far:
I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
I installed epson-inkjet-printer-workforce-sx218 from AUR
I started cups...
Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
I searched the forums for a solution
I installed cups-usblp and reinstalled all the cups stuff
Printer got recognized! Yay!
So, now the printer is set up in cups using the avasys driver. But...
It doesn't print!
When I try to print a test page via the cups webinterface it keeps telling me
Unsupported format "application/vnd.cups-banner".
The following packages are installed now:
$ pacman -Qs cups
local/cups-usblp 1.5.0-1
local/libcups 1.5.0-1
$ pacman -Qs foomatic
local/foomatic-db 1:4.0.7_20110707-1
local/foomatic-db-engine 1:4.0.7_20110707-1
local/foomatic-db-nonfree 1:4.0.7_20110707-1
local/foomatic-filters 1:4.0.7_20110707-1
$ pacman -Qs epson
local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
$ pacman -Qs ghostscript
local/ghostscript 9.04-5
Here's my cups error log:
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:01 +0100] Report: clients=1
D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
D [01/Jan/2012:18:59:01 +0100] Report: printers=0
D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
D [01/Jan/2012:18:59:35 +0100] Script header:
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:00:23 +0100] Report: clients=1
D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
D [01/Jan/2012:19:00:23 +0100] Report: printers=0
D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:19:03 +0100] Report: clients=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
D [01/Jan/2012:19:19:03 +0100] Report: printers=0
D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:22:10 +0100] Report: clients=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:22:11 +0100] Report: printers=0
D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:24:21 +0100] Report: clients=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
D [01/Jan/2012:19:24:21 +0100] Report: printers=0
D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:27:26 +0100] Report: clients=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
D [01/Jan/2012:19:27:26 +0100] Report: printers=0
D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:37:11 +0100] Report: clients=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:37:11 +0100] Report: printers=0
D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
I [01/Jan/2012:19:38:18 +0100] Full reload is required.
I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:19:38:19 +0100] Full reload complete.
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
D [01/Jan/2012:19:38:20 +0100] Report: clients=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
D [01/Jan/2012:19:38:20 +0100] Report: printers=0
D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
I [01/Jan/2012:20:54:26 +0100] Full reload is required.
I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:20:54:27 +0100] Full reload complete.
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
D [01/Jan/2012:20:54:28 +0100] Report: clients=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
D [01/Jan/2012:20:54:28 +0100] Report: printers=0
D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
I [02/Jan/2012:05:35:05 +0100] Full reload is required.
I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:05:35:06 +0100] Full reload complete.
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
D [02/Jan/2012:05:35:07 +0100] Report: clients=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
D [02/Jan/2012:05:35:07 +0100] Report: printers=0
D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
I [02/Jan/2012:17:22:51 +0100] Full reload is required.
I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:17:22:52 +0100] Full reload complete.
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
D [02/Jan/2012:17:22:53 +0100] Report: clients=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
D [02/Jan/2012:17:22:53 +0100] Report: printers=0
D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
Thank you very much!Hi Radhakrishnan,
ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
regards,
Stewart -
Solution - Battery error is detected. Irreparable damage to the battery has been detected. Replace
I own a T61 7658 I bough on 2008, it worked great with the default power settings until October 22nd I decided to change my power profile to MAXIMUM PERFORMANCE.
Next day I received on Message Center...
10/23/2010 - Battery health is critical. With the current system settings and a full charge, your battery can provide approximately 3.0 hours of use. A new battery could provide up to an estimated 5.5 hours.
I kept using the Laptop with the Max performance until...
11/12/2010 - Battery error is detected. Irreparable damage to the battery has been detected. Replace the battery with a new one.
I have used IBM/Lenovo for years and even had used batteries for 5 years without a single issue.
I have read many posts of people having the same problem not only with T61s, but many other Lenovo models, and also read posts of Lenovo's administrators suggesting this is normal and justifying that batteries should be good for at least 12 months and after that we are on own, basically meaning we should be thankful in name of our own safety that we had that battery protection and we must replace it at our own cost and forget about it. That is a very easy way out, isn’t it.
But certainly, not only batteries with more than 12 months are failing, even new batteries are and have been replaced with multiple exchange programs posted by Lenovo in their website just as in http://download.lenovo.com/lenovo/content/batt/082009/LandingPage.html. and also in multiple MIGR battery replacement campaigns available to all online as well.
Good thing here is that Lenovo has recognized the problem and has exchange the batteries still under warranty and also few of the batteries without warranty limiting to some serial numbers on the MIGR battery replacement campaigns, but the bad side is that Lenovo is leaving behind other clients like me and many others not being selected for replacement. But I’m sure we all have a good battery but turned useless due to the Lenovo programmed safety temperature limits in the power manager and the battery board. Please let me explain.
This is my conclusion. There is nothing wrong with used or new batteries or their cells in 99% of the cases, I'm sure my battery is okay although is being turned useless by the battery protection feature on my T61.
Lenovo must recognize the problem is the settings they have programmed on the power manager and battery protection board. It is very understandable that when users select a Power Scheme that demands higher amounts of power to generate better performance on the system this also demand additional power generating heat on battery and on the power supply as the computer is running at full performance, just as happens on my ipod when watching video, or in my kid’s R/C truck when running continuously and will happen with any other battery powered device.
Therefore any scheme requiring performance is generating heat and is tripping the battery protection and this is not a client’s fault, as are we just using an available scheme provided on our Lenovo system. If the battery protection is not calibrated to support this power demand, then there is a poor design/testing of the capabilities of the system and the battery protection parameters that instruct the battery to save itself from a fire or burning … which is understandable.
The bad side is that there is not possible reset option for the end users, the only option is to buy a new battery at our own cost after the 12 months of warranty, when the cause of the problem is originated in the computer system design settings and can happen at any time, that is way, the system warned me, as in:
10/23/2010 - Battery health is critical. With the current system settings and a full charge, your battery can provide approximately 3.0 hours of use. A new battery could provide up to an estimated 5.5 hours.
The computer is saying! At maximum performance, You are using too much power, and my battery will last just 3 hrs (9 cells on my system) instead of the 5.5 hrs that should last. But not only the running time was reduced, the heat on the power supply system and Battery was also increased due to the higher power demand, the battery can not handle the demand and protect itself to prevent fire or damage.
So who has to pay for this? Can Lenovo do something about it? For us client and for future clients? This not a matter of having or not having warranty, this can happen at any time in any computer.
I'm writing this hoping to be heard and supported and I hope LENOVO provides a satisfactory solution to the issue. I'm not going to say will never buy Lenovo again I already did, I invested my money on Lenovo and with warranty or not I'm looking forward to get a decent response.
Lenovo must change the parameters for tripping battery protection probably handled at BIOS level, and to provide a reset feature to all "locked" batteries there is many people that has lost at least one battery, some other more than that. Since even if we get a replacement, the chances the issue will continue is there, as long as I select a high power demand scheme the problem sooner or later will be back. Even car makers support their clients beyond the warranty if they detect that the issue compromises safety and their reputation. Fix it.
M.Padron.amtho, welcome to the forum,
start by looking at this site and also look at this site which is actually linked to from the first one.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Maybe you are looking for
-
HT1551 Rentals do not show up on Apple TV, can somebody tell me why?
Can anybody tell me why movie rentals purchased on the iPad do not show up on the Apple TV?
-
Tables for marketing attributes and relationship
Hi anyone! I'm creating InfoSets in CRM and I need the tables containing marketing attributes and relationship for BPs. Does anyone of you know which tables this data is stored in??? Regards Camilla
-
"Subscription has now expired" email
Hi Skype Community, Some of you have recently received an email titled "Your subscription has now expired - renew today" without being aware of any of your subscriptions expiring. Please sign in to your Skype web account page at www.skype.com/go/myac
-
Distinguish between Journal Listing and Order Listing
Hi Guys Is there a way to distinguish whether it can come into an activity journal and not in an ERP or Transfer order? Is there config that tells it to come into an activity journal only. Or only into an order. Help Needed.
-
Please change JavaFX Script Language Operators to well known standards.
I am having a lot of trouble getting used to the JavaFX operators, and even more trouble understanding WHY they are so different than those in Java. Look at the [operators for ActionScript|http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/ope