ERROR: DOCUMENT IS LICENSED....

I was forced to re-download ADE 1.2 after about a month. I also had to use a new Adobe ID to authorize the thing (it had lost my old account or something, which was weird, because I don't use any other Adobe products that require an ID). Now, I can't open any of my ebooks, due to an error that says "DOCUMENT IS LICENSED FOR DIFFERENT USER ACCOUNT"
I'm using a Windows XP system on a Dell IBM laptop and I have no idea how much RAM is in it (whatever RAM means-I'm horribly technophobic). Please, someone, take pity on me and explain what I did wrong as well as how to fix it before I rip all my hair out. And if I rip out all my hair, then what reason do I have for living?

Well, honestly I'm not sure we can do it that quickly considering the behavior. However, it's important that we get support cases for these issues, for a number of reasons. Having an actual case with a case number helps guarantee our accountability, and let us work with an escalation procedure. If you could post back your case # I can bring it up in our support meeting tomorrow, perhaps we can make some progress.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

Similar Messages

  • ADE error: "Document is licensed for a different user account"

    My ADE worked great for months. All of a sudden it will not let me add books to it's library. When I try to add a book (Epub w/DRM) it tells me "Document is licensed for a different user account." What changed? What is my problem?

    You're going to have to answer the question yourself, unfortunately.  I can
    explain what the message means, but I can't do the detective work to see
    what happened in the past.
    This message is generated when the information attached to the
    document/ebook shows that "User A" downloaded it to his/her copy of Digital
    Editions is different from what's in place at this time.  There are a number
    of things that could have happened, but right now, "User B" is trying to
    download that document/ebook.
    There's no easy fix - especially if the document/ebook is DRM-protected, as
    many of the ones we buy are.  Once you find out who did what, then you could
    contact the source and see if they'll work with you to get another copy
    downloaded to your copy of Digital Editions.
    ===========

  • Unable to open a book after upgrading OS, Document is licensed for different user

    I had purchased the attached ebook previously. I recently changed my operating system from Windows XP to Windows 7. So I also migrat
    ed My Digital Editions folder using Microsoft Windows Easy Transfer program. Now after restoring it on Windows 7 when I try to open
    my any ebook I get the error "Document is licensed for a different user account".
    I did not authorize digital editions with adobe id at the time of purchasing ebooks,
    Please help me resolve this error.
    I have opened the case 0181318653.
    I hope very helpful Jim Lester can help in resolving this issue.
    Thank you,
    Hiren

    I am having the exact same problem! I cannot move my B&N books for my Pandigital into ADE!  I have changed everything so that all of my log ins are exactly the same, I have uninstalled and re-installed everything Adobe. I have authorized, de-authorized and re-authorized!! Someone help!!

  • Please help. Error message "Document is licensed for a different user account"

    I purchased a ebook on B and N and saved to my PC. I added this ebook to the library in Adobe Digital Editions and it is displayes. Whena I click on it to open I receive the error message"Document is licensed for a different user account". Please let me know what to do?
    Thank you.

    Hi,
    In order to fix this you need to contact B&N support and ask them to reset download link of the books and then download same book once again.
    Regards
    Rizwan.

  • I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please

    I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.

    I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.

  • "Document is licensed for a different user account." error msge.  Win XP, Adobe Digital Editions v1.7.  (If I need to upgrade must I first go to v2.0 and then v3.0 to maintain my library?)

    "Document is licensed for a different user account." error msge.  Win XP, Adobe Digital Editions v1.7.  (If I need to upgrade must I first go to v2.0 and then v3.0 to maintain my library?)

    "Document is licensed for a different user account." error msge.  Win XP, Adobe Digital Editions v1.7.  (If I need to upgrade must I first go to v2.0 and then v3.0 to maintain my library?)

  • Adobe Document Services Licensing or not.

    Hi Expert,
    I have small doubt. Adobe Document Services Licensing or not. How to configure ADS. I have insttaled Adobe LiveCycle Designer in my local PC. I have created designed form through TCode:- SFP. But I have run the application Device type unsuitable for ADS documents & Call contained error(s): ADS (2)  error message show.
    Thanks & Regards,
    Rahul

    A

  • DOCUMENT IS LICENSED FOR DIFFERENT ACCOUNT

    Bought EPUB book off of B&N site for my Pandigital Reader, trying to read it on my computer. I keep getting message "DOCUMENT IS LICENSED FOR DIFFERENT ACCOUNT" . I followed directions in another thread to fix issue and I still get error message
    How do I find out WHAT account document CAN be read on? I have 2 diff emails attached to this ADOBE DIG READER & neither of them will allow me to read this book!
    This is WILD! As wild as not being able to unlock DRM books to read on diff devices or convert to PDF
    Anywho, is there a way to find this out (what account I CAN read it on?)
    Thank you for any help you can give me

    I am having the exact same problem! I cannot move my B&N books for my Pandigital into ADE!  I have changed everything so that all of my log ins are exactly the same, I have uninstalled and re-installed everything Adobe. I have authorized, de-authorized and re-authorized!! Someone help!!

  • Error: "Document could not be saved"

    Hi all!
    I regularly receive an error, "Document could not be saved", in OS X after a while of usage. It can come after 10 minutes of usage, or after 10 hours of usage. It affects ALL open applications and documents, and doesn't solve with anything but a restart of the entire system. I haven't found any relation to working with any specific application – it seems to happen at random while using any application. And as I said, it affects the entire system and all applications once it happens.
    I've also tried this solution (posted elsewhere), but with no luck:
    Restart Lion, and Before you hear the chime, hold down Cmd + R, to access Lion Recovery.
    Click the Utilities item in the Menu Bar, then click Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
    At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
    Does anyone know of any other solution to this problem? Or does anyone know the reason for it?
    I should also mention that I experienced another problem recently, whereby my computer begun to sometimes (but not always!) show a progression bar at startup. This bar could take between 5-15 minutes to finish. This kept happening for maybe two weeks' time, until finally one day the computer wouldn't startup at all. It would come to show the dark grey Apple logo on the light grey background, and then suddenly shut off before reaching any further. I did a complete wipe out of the hard drive and re-install of the system, and since then haven't experienced the "progression bar"-problem anymore. I read somewhere that this problem could be a sign of harddrive failure or damage, but I still wonder if that is correct. Could the above mentioned "Document could not be saved"-problem also be related to a hard drive damage?
    Thanks in advance for your assistance
    Regards
    Alex

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Epson SX218 doesn't print (client-error-document-format-not-supported)

    Hi there,
    I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
    Here's what I've done so far:
    I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
    I installed epson-inkjet-printer-workforce-sx218 from AUR
    I started cups...
    Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
    I searched the forums for a solution
    I installed cups-usblp and reinstalled all the cups stuff
    Printer got recognized! Yay!
    So, now the printer is set up in cups using the avasys driver. But...
    It doesn't print!
    When I try to print a test page via the cups webinterface it keeps telling me
    Unsupported format "application/vnd.cups-banner".
    The following packages are installed now:
    $ pacman -Qs cups
    local/cups-usblp 1.5.0-1
    local/libcups 1.5.0-1
    $ pacman -Qs foomatic
    local/foomatic-db 1:4.0.7_20110707-1
    local/foomatic-db-engine 1:4.0.7_20110707-1
    local/foomatic-db-nonfree 1:4.0.7_20110707-1
    local/foomatic-filters 1:4.0.7_20110707-1
    $ pacman -Qs epson
    local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
    $ pacman -Qs ghostscript
    local/ghostscript 9.04-5
    Here's my cups error log:
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
    D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
    D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
    I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
    I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
    D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:01 +0100] Report: clients=1
    D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
    D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
    D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
    D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
    D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
    D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
    D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
    I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
    D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
    D [01/Jan/2012:18:59:35 +0100] Script header:
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:00:23 +0100] Report: clients=1
    D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
    D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:19:03 +0100] Report: clients=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:22:10 +0100] Report: clients=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:24:21 +0100] Report: clients=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:27:26 +0100] Report: clients=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:37:11 +0100] Report: clients=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
    I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
    I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
    D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
    I [01/Jan/2012:19:38:18 +0100] Full reload is required.
    I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:19:38:19 +0100] Full reload complete.
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
    D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
    D [01/Jan/2012:19:38:20 +0100] Report: clients=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
    I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
    I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
    D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
    I [01/Jan/2012:20:54:26 +0100] Full reload is required.
    I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:20:54:27 +0100] Full reload complete.
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
    D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
    D [01/Jan/2012:20:54:28 +0100] Report: clients=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
    I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
    D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
    I [02/Jan/2012:05:35:05 +0100] Full reload is required.
    I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:05:35:06 +0100] Full reload complete.
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
    D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
    D [02/Jan/2012:05:35:07 +0100] Report: clients=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
    I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
    D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
    I [02/Jan/2012:17:22:51 +0100] Full reload is required.
    I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:17:22:52 +0100] Full reload complete.
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
    D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
    D [02/Jan/2012:17:22:53 +0100] Report: clients=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
    E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
    E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
    W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
    Thank you very much!

    Hi Radhakrishnan,
    ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
    I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
    regards,
    Stewart

  • How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413  Header Length too Large?

    How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413  Header Length too Large?
    Just bought the perpetual license online - student-teacher version. Received email confirming my eligibility and followed all instructions to a 't', but still got this 413 error message, and cannot continue.
    Would anyone be able to help me?
    Or how can I get in touch with Adobe themselves?
    How do you get to the chat? I bought it with their help, but cannot remember how to get there again. Took me ages to find the chat.
    Cheers!!! Thanks a million! Any help is welcome!!!!

    Make sure you have cookies enabled and clear your browser's cache before you try downloading.  If it continues to present that error try using a different browser.
    As far as getting to a chat link goes, it can be hit or miss...  Start Here  If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

  • Error: Document not found. (WWC-46000) while updating a form whit blob items

    Hi all,
    I have to manage a table-based form. The table has a BLOB field that allows NULL.
    The blob field of the form is hidden.
    When I try to INSERT all works well but when I attempt to UPDATE I get "Error: Document not found. (WWC-46000)".
    Have you some suggestions ?
    Thanks,
    Antonino
    p.s. Oracle Portal 3.0.7.6.2 / NT

    I have the same problem. I have one form to insert file (works fine), and another form to update that record, but not the file. The fields of the file (blob and mime type) are not on the form at all, and getting the message WWC-46000.

  • "Error: Document not found (WWC-46000)" with a form based on a table with blob item

    Hi all,
    I have to manage a table-based form. One of the fields of the table is BLOB and the corrisponding field of the form is HIDDEN.
    When I push the INSERT button all works well but when I try to UPDATE I get "Error: Document not found. (WWC-46000)".
    Have you some suggestions ?
    Thanks,
    Antonino
    p.s. Oracle Portal 3.0.7.6.2 / NT
    null

    Sorry, I think I did not explain well my problem.
    Imagine this simple table:
    key number;
    description varchar2(50);
    image blob;
    I need to make a form that contains the corresponding "key" field and the "description" field but not the "image" one. I don't want to allow the end user to upload images!
    When I insert a row the form works well and in the "image" field of the table an empty blob or null (now I don't remember) is stored: that's ok.
    Now imagine I want to change the value of the "description" field. I submit a query for the right key, I type a new value for the description and finally I push UPDATE button but....an error occours.
    I think this error is related with the Blob item of the table but I'm not sure.
    Thanks again,
    Antonino
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dmitry Nonkin([email protected]):
    Antonino,
    If I understood the problem correctly:
    The form's item type for BLOB column used to upload content cannot be hidden, that's why we have a special item type FileUpload(binary).
    Thanks,
    Dmitry<HR></BLOCKQUOTE>
    null

  • Loans document error Document header does not have a reconciliation key

    Hi All,
    I am trying to post a loans document through EK25 and while saving the document following erros is coming
    Formal error: Document header does not have a reconciliation key
    Message no. >0037
    Diagnosis
    You tried to post a document but a reconciliation key is missing from the document header. Since mass processing does not apply here (where the reconciliation key is automatically created) you must enter a reconciliation key.
    System Response
    Error message. Processing is terminated.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    If the program error occurred in an
    SAP standard program, enter a problem message
    Own program, correct the program
    Any input appreciated.
    Thanks,
    VR

    Hi,
    You need to assign the reconcilation group to the SAP user ID you are using to post the loan document.
    The reconciliation group is required if user-specific reconciliation keys are to be proposed automatically.
    The reconciliation group is freely selectable.
    Go to the following path in IMG-
    IMG->Financial Accounting->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document-.Define Default Values->Maintain Rules for Reconciliation Key Default Values->Maintain Reconciliation Groups for Default Values
    Maintain the SAP User ID that you are using along with a reconciliation group.
    After, you maintained the user ID and saved it, try to post the loan document again.
    Hope it helps..
    Thanks,
    Amlan

  • Error 150:30, "Licensing for this product has stopped working"

    I recently updated my Mac OS, and am getting error 150:30, "Licensing for this product has stopped working" on all my CS4 products. The license repair tool will not launch in Mavericks. Help?

    CS4 is completely unsupported under Mavericks and using an upgraded
    operating system is nothing short of a crapshoot.
    Unfortunately, you are completely on your own here.

Maybe you are looking for

  • Fix exchange rate

    Hi, There is an option in configuration (materials management u2013 logistics invoice verification u2013 incoming invoice u2013 configure how exchange rate differences are treated) on logistics invoice verification in which I can fix the exchange rat

  • Error while receiving message from partner.

    HI All, i am having interface Thrid Party -- > XI -- > SAP We are using AS2 adapter at sender side and IDOC as receiver end. My scenerio was working fine till quality server and when we went live message started failing in seburger workbench. AS2 mes

  • How to find what sql statement is currently running by scheduler job?

    Hi I scheduled a stored procedure to run every 5 minutes using dbms_scheduler. The stored procedure internally call serveral other stored procedures. The scheduled job is in running state and right now I want to find out what is the sql statement the

  • Upgrade 10.2 to 11.2 manualy using cold backup copy on new server.

    Hi, I am going to manually upgrade my databases to 11.2 from 10.2. I will use cold backup of 10.2 and copy in to the new server Red Hat Linux 5. I got a Note (742108.1) done for upto 10.2.0.5 and it tells to set orapwd file=$oracle_HOME/dbs/orapw<SID

  • Print button in ABAP WebDynpro

    Hello all,   The client has requested a 'Print' button in our webdynpro application - ie a simple button that triggers the browser command Ctrl P. I have searched the forum, and it seems that this is not possible, because WebDynpro cannot execute bro