Error "document not saved" when want to save Word/Excel files on NAS server

Hello everybody!
I have a NAS server (QNAP storage).I want to have some folders with these permissions : 
1.nobody can create or delete folders in first parent folders (blue folder and red folders )
2.everybody can create/save folders,docs... in it. (Black folders)
when I set permission like picture below,people can not save documents in Excel or Word format in folders ( I have this problem just for Word and Excel).they face with errors : document not saved / access denied,contact your administrator.
special permission for blue folder (domain users) 
(include inheritable permission) and (replace all child subfolders...) are unchecked.
traverse / execute files
List folders/ read data
Read attribiutes
Read extended attribiutes
Read permission
special permission for red folder :
(include inheritable permission) and (replace all child subfolders...) are unchecked.
traverse / execute files
List folders/ read data
Read attribiutes
Read extended attribiutes
create files / write data
create folders / append data
write attributes
write extended attributes
delete subfolders
delete
Read permission
special permission for black folder :
these folders inherit permissions from parents.
(include inheritable permission is checked.
(replace all child subfolders...) is unchecked.
when I uncheck "delete" permission in red folders and save it,"modify" permission in main permission will uncheck,too.I dont know why?in this situation,people can save docs, but they can rename/delete folders,too ( I dont want they delete
or rename parent folders).
what I must do?
regards,
atiye moghaddam

Hi.
How are the rights configured to be inherited? Could you do a "icacls <folder>" on each level and post it back.
Also worth considering is that this is a Linux Samba system, so it might not work as a regular windows system.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot

Similar Messages

  • Files are not saving (exp: Notepad,Paint, Office Word/Excel/PowerPoint)

    Hi
    Am using XP professional SP3 and last 3days am facing fallowing problem. If i try to save any type of file "Notepad/Word/Paint/MS Office Word/Excel/PowerPoint" i unable to save and it showing one pop up and after that it would close that application.

    Also, check events logs. Post the same along with the screenshot.
    Arnav Sharma | Facebook |
    Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
    reading the thread.

  • I want to save word/pdf files somewhere online

    Hi all,
    At the moment I'm writing my MSc dissertation. Everytime I'am done writing, I save it on a usb stick which I have to bring a long. Isn't there a way to store it somewhere (save) online? So that I don't have to bring my usb-stick with me anymore (and more importantly, I don't have the risk of loosing my usb)?
    Thanks in advance,
    All the best

    I agree, Dropbox is imho the best, cross-platform (there's Mac, Windows, Android clients, and even web-based if you're not on your devices), and of course free.
    I agree too, never have file(s) in only one place.

  • Office 2010, Excel - Document not saved

    Hello.
    I've got a computer in my work that have randomly have "Document not saved" when trying to save excel files on the local network. In periods It happen everytime she' tryin to save, but It most happen like now and then.
    She had the same problem when having Office 2007. I'd hope It was a Office 2007 issue, but when upgraded to Office 2010 It happens often as before.
    I've have been tryin some hotfixes and some other tricks for Office 2007.
    Computer: HP Elitebook 6930p with Windows 7 enterprise x86, office 2010 Pro

    Hi,
    There is a KB article taking about the problem when saving Excel files to network location. Please check if it helps:
    You receive an error message when you save a file after the network connection is lost in Excel
    http://support.microsoft.com/kb/291204
    If the problem persists, you can also troubleshoot the issue by the suggestions here:
    How to troubleshoot errors when you save Excel files
    http://support.microsoft.com/kb/271513
    Hope it helps.
    Best Regards,
    Sally Tang

  • How to save an excel file as CSV with semi-colon as data separator?

    We are creating a flat data file to load the flat file data to our BW system with Excel.  When we save the file, there are three kinds of CSV types for selecting from the "Save as type" list box:
    CSV (Comma delimited)
    CSV (Macintosh)
    CSV (MS-DOS)
    There is no CSV (semi colon delimited) type.  If we pick CSV (Comma delimted) as the type, then when clicking the "Preview ..." picture icon under the "DataSource/Trans. Structure" tab of the InfoSource for this flat file (with the CSV radio button checked the Data separator default is ";"), the File Upload Preview window shows the data is messed up that some columns of the excel flat file are combined into one column.
    Since the save type we picked is "CSV (Comma delimited)", then we try to change the default Data separator from ";" to "," in the preview selection screen, but still not helpful!
    How to resolve the above problem?
    Thanks

    Hi Kevin,
    This "," is defined in your windows setting. If you want to have ";" as separator then go to control Panel, select Regional Options, go to Numbers Tab and define the List separator as ";". After that when you will save your excel file as CSV(MS-DOS) it will have ";" as separator. This will make sure that the amounts are not broken in to two different fields while loading.
    Else if you keep "," as separator then you can also go into the Excel and define all number fields as Number without thousand separator.
    Let me know if you have any doubts in this.
    Regards,
    Rohit

  • How to Save a text file in the server?

    hello
    i just want to save an text file in the server.
    My idea is to load an xml text file maybe make some changes
    and then save it back to the server, so i can avoid all the
    database/php work because i know nothing about it.
    thank you

    hello
    i just want to save an text file in the server.
    My idea is to load an xml text file maybe make some changes
    and then save it back to the server, so i can avoid all the
    database/php work because i know nothing about it.
    thank you

  • Save as failed to process. document not saved

    Save as failed to process. document not saved. This is the error message i get when trying export pdf document to word. I only just upgraded window to 8 pro from windows 7.
    Any suggestions?
    Thanks

    What version of Acrobat. That might be the problem.

  • Error Indexing not allowed when marking indexing for document HR_DOC

    Hello all,
    We are able to solve the first problem. Now we have the following error
    "Error Indexing not allowed when marking indexing for document HR_DOC"
    Has anyone idea on how to solve it?
    Thanks a lot.
    Best regards,

    ....and thanks a lot for your feedback in resolving this issue!

  • Windows 7 (64bit) & Office 2010 (32bit) Excel 'Document not saved' over WAN to network drive

    Hi All
    We are currently in the process of upgrading all PC's on our WAN to windows 7 across multiple locations
    I know this has been asked numerous times but nothing is working for me.
    We are experiencing the dreaded 'Document not saved' error at only some locations (5 or 6 out of 200 for all users, these sites generally have slow network connections) when trying to save to a network share back at our HQ. it creates a .tmp file and leaves
    the original document intact but without the changes, changing the name of the document in save as doesn't work. saving locally and copying to the share works. We can save locally and to other onsite network shares. It constantly happens so the document can
    never be saved to that network share.
    Always worked on XP SP3 with Office 2010.
    the files in question are around 4mb. smaller excel files with no contenct do work.
    I have tried literally everything listed on all forums and nothing seems to resolve it...I've tried
    - the hotfix - doesn't apply to my enviroment and the offending KB aren't installed.
    - the network resiliency, pivot table network resiliency and Enable simply copy for UNC registry keys
    - disabling offline folders, windows search and indexing
    - disabling SMB2 on the client
    - turning off QOS on the IP4 settings.
    - trusted documents.
    event log gives
    Log Name:      OAlerts
    Source:        Microsoft Office 14 Alerts
    Date:          28/03/2014 18:47:23
    Event ID:      300
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Description:
    Microsoft Excel
    Document not saved.
    P1: 100490
    P2: 14.0.7015.1000
    P3: xsmh
    P4: 0x80070040
    and numerous other things.
    My guess is me the issue points to Excel loosing connection to the network share when saving and then the .tmp becoming corrupt.
    Does any one have any ideas? Is there a way to sure the connection when saving? is there a way to force it to stay connected?
    any help highly appreciated.
    Thanks

    Hello, We've been having this same issue, and I think we have a work-around.
    If we change HKLM\System\CurrentControlSet\services\LanmanWorkstation\Parameters\RequireSecuritySignature from "0" to "1" we still get the error message but the tmp file is NOT created. If the user tries to save again, it is then successful.

  • "Document Not Saved" Microsoft Excel 2010 SP1

    We have a remote office which has a 2mb WAN link, The users in the remote office have a variety of Office installs from 2003 to 2010 SP1.
    When attempting to open an excel file over the WAN link (The file is on our main shared drive in Sydney) they can open and edit the document however when it comes to saving they receive "Document not saved" and the original document is gone and a .tmp file
    remains where the original file was on the network drive/shared folder.
    If they then hit save a second time it saves correctly and the document is in the correct .xls format.
    The excel files do have some funky tables etc in them and are a few mb's in size, however we have the same issue with a new excel document with only one word written in it.
    Does anyone know what would be causing this issue?
    We have tried added NetworkResiliency and PivotTableNetworkResiliency as per http://support.microsoft.com/kb/291204.
    We have tried removing certain hot fixes from Microsoft as mentioned in http://support.microsoft.com/kb/983458.
    We added the share to be a trusted site.
    There are no errors in Event Viewer. 
    I have found another few threads on similar issues with no fix:
    http://social.technet.microsoft.com/Forums/en-US/office2010/thread/f559b061-b98f-4b33-ab8a-d1a41d2e8cb8/
    http://social.technet.microsoft.com/Forums/en-US/officeappcompat/thread/4af962a0-d883-4e82-8995-7eb766d6c720
    We do have a RiverBed at the remote office and one at the site in Sydney which is for network optimization. On the RiverBed with have all CIFS ports added and QoS marking done so it should be optimized.
    Any assistance with how to fix this annoying issue would be greatly appreciated.
    Thanks

    We're having the same exact issue in our office where we just installed a new Riverbed Steelhead as well... only happening in that office as well...User opens a document on a network share that the rest of the company works from day to day, they save 10
    or 20 minutes later and BAM... "There has been a network or file permissions error. The network connection may be lost", then a non-hidden *.tmp file is then created in the same network directory as the actual file and the original file doesn't get
    written to, you click [OK] on the error and then try to save again and it magically works...and you're left with a messy TMP file as well in the directory now. I doubt it's related to antivirus, definitely not firewall, reinstalling/repairing office and tweaking
    settings doesn't help, I agree it has nothing to do with locking files or read-only files as they're plain old word docs and excel files...MAYBE it has to do with the Riverbed WANOP appliance but either way... don't you love how this thread just randomly died
    with no solutions? :'(   Thanks Micro$oft ;)
    {Edit} Oh! And one last thing...this MIGHT help steer someone in the right direction in the future... there could be a problem related to your network filer such as a NetApp appliance, EMC, Netgear etc where there is an SMB version mis-match or a bug of some
    kind requiring you to apply a patch your storage device in order to fix this type of issue.

  • "Error: Document not found (WWC-46000)" with a form based on a table with blob item

    Hi all,
    I have to manage a table-based form. One of the fields of the table is BLOB and the corrisponding field of the form is HIDDEN.
    When I push the INSERT button all works well but when I try to UPDATE I get "Error: Document not found. (WWC-46000)".
    Have you some suggestions ?
    Thanks,
    Antonino
    p.s. Oracle Portal 3.0.7.6.2 / NT
    null

    Sorry, I think I did not explain well my problem.
    Imagine this simple table:
    key number;
    description varchar2(50);
    image blob;
    I need to make a form that contains the corresponding "key" field and the "description" field but not the "image" one. I don't want to allow the end user to upload images!
    When I insert a row the form works well and in the "image" field of the table an empty blob or null (now I don't remember) is stored: that's ok.
    Now imagine I want to change the value of the "description" field. I submit a query for the right key, I type a new value for the description and finally I push UPDATE button but....an error occours.
    I think this error is related with the Blob item of the table but I'm not sure.
    Thanks again,
    Antonino
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dmitry Nonkin([email protected]):
    Antonino,
    If I understood the problem correctly:
    The form's item type for BLOB column used to upload content cannot be hidden, that's why we have a special item type FileUpload(binary).
    Thanks,
    Dmitry<HR></BLOCKQUOTE>
    null

  • Excel COMException : 0x800A03EC Document not saved.

    Hello,
    I am using Interop.Excel in my WinForms application. The application is used to copy some sheets from one workbook to newly created one.
    The newly created workbook is saved when I don't copy shapes. But, when I copy shapes into newly created sheet, the workbook is not saved and COMException is raised with message "Document not saved".
    Scenario :
    I am working with three workbooks simultaneously. 
    MainWorkbook - this workbook contains data to be written into new workbook.
    ResourceWorkbook - this contains sheets that are copied into new workbook.
    OutputWorkbook - this is the result workbook.
    Step 1: Open MainWorkbook. Get data to write in OutputWorkbook.
    Step 2: Write data into OutputWorkbook.
    Step 3: Open ResourceWorkbook from resource file for copying the sheets.
    Step 4: Copy sheets from ResourceWorkbook into OutputWorkbook.
    Step 5: Save OutputWorkbook.
    In step 5, if there are no sheets with images copied in step 4, then the OutputWorkbook is saved. But, if there are sheets containing images, the OutputWorkbook is not saved.
    I am using VS2010 and MS Office 2010.

    Hi,
    According to the description, the issue seems that relative to the specific worksheet which containd shapes.
    I am trying to reproduce this issue in Excel 2010 using VBA, howerever it failed. Here is the test sample which set write the value to the Book2 and copy the worksheet contained shapes from Book1 to Book2:
    Sub CopySheet()
    Application.Workbooks("Book2.xlsx").Worksheets("Sheet1").Range("A1") = "Hello Word!"
    Worksheets("Sheet1").Copy Application.Workbooks("Book2.xlsx").Worksheets("Sheet1")
    Application.Workbooks("Book2.xlsx").Save
    End Sub
    Could you reproduce the issue with code above? If not, a sample worksheet and code snippet to help us reproduce this issue is much appericate.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Document not saved

    When i use exel and add a comment to a cell "Document not saved" some times comes up. To get past this i have to delete the coment and re do it, it then some times saves. I dont know what I am doing wronge and what I am doing right because it does some times save.
    Thanks. Lewis

    Hi.
    Thanks for answering.
    Its version 14.0.0

  • CRM_ORDER_SAVE document not saved

    Hi All,
    I have created a custom report and have used CRM_ORDER_SAVE in my report program. But the problem is that when I execute this program in our production environment, I do not get the required results and the exception is raised as "document not saved". This works fine in the development environment and quality system. But fails in production and not commiting.
    Please suggest what can be the root cause of this problem and how shall i correct it.
    Here is the code ::
        CALL FUNCTION 'CRM_ORDER_SAVE'
          EXPORTING
            it_objects_to_save = guids
          EXCEPTIONS
            document_not_saved = 1
            OTHERS             = 2.
        IF sy-subrc <> 0.
        ELSE.
          COMMIT WORK AND WAIT.
    ENDIF.

    Hi,
    After calling the CRM_ORDER_SAVE, you need to call the following function module in the proper order to make the save successful and to initialize the order.
    1. BAPI_TRANSACTION_COMMIT
    2. CRM_ORDER_INITIALIZE
    If you need to look in the code base, then put a debug point in the function module CRM_ORDER_MAINTAIN and have a look at all the import parameters and order of the function modules.
    Hope this will help.
    Thanks,
    Samantak.

  • Error: Document not found. (WWC-46000) while updating a form whit blob items

    Hi all,
    I have to manage a table-based form. The table has a BLOB field that allows NULL.
    The blob field of the form is hidden.
    When I try to INSERT all works well but when I attempt to UPDATE I get "Error: Document not found. (WWC-46000)".
    Have you some suggestions ?
    Thanks,
    Antonino
    p.s. Oracle Portal 3.0.7.6.2 / NT

    I have the same problem. I have one form to insert file (works fine), and another form to update that record, but not the file. The fields of the file (blob and mime type) are not on the form at all, and getting the message WWC-46000.

Maybe you are looking for

  • ICal automatically deletes event I just added

    I recently updated my MacBook Pro to Mountain Lion software. Now, whenever I add a new event to my iCal, it appears for a moment and then deletes itself. I have several different color calendars for different subjects. Some calendars and their events

  • Best Practice for SAP PI installation to share Data Base server with other

    Hi All, We are going for PI three tire installation but now I need some best practice document for PI installation should share Data base with other Non-SAP Application or not. I never see SAP PI install on Data base server which has other Applicatio

  • Budget control for Vendor

    Dear SAP Gurus, My client where Funds Management has been implemented, has a specific requirement of assigning budget to Vendors. In our case we have treated all employees as vendors. Some of the employees(vendors) get grants for specific projects an

  • Deleting old files on new installation of cs2

    I recently bought cs2 design premium for my second computer . unlike the installing of later cs versions which I recall have an UNINSTALL file I believe the cs2 does not (I have not opened it in case it needs to be returned). I have a number of older

  • Why would firefox suddenly decide not to let me open more tabs?

    Yesterday, my firefox was working fine. Today, I went to ope a new tab, and nothing happened. I tried going file>new tab, I tried ctrl+t, and I tried clicking the little box next to the already open tab. Nothing happened. Is there a way to fix this?