Error "Document splitting cannot find a distribution for currency type 00"
Hi All,
We are using ECC 6.0 version nAfter uploading a MT940 bank statement thru FF_5 we usually go to FEBA and check if there are any unposted items and we post them manually. And while doing so I am getting an error as "document splitting cannot find a distribution for currency type 00". But when i simulated the same scenario in my QA system the document is getting posting of without any issue. If any one has come across this situation, let me know how to over come the same.
Thanks and Regards
Srihari Bolla
Hi
Check and implement notes - 888389, 1000955, 1268620, 925221
Cheers!
Zub
Similar Messages
-
Document splitting cannot find a distribution for currency type 00.
Hi all
We are getting this error when we are uploading a bank statement. The error is in production client but not in quality client. We have checked sap not 1268620 and this has been implemented but error is still coming. Statements have been uploaded for this particular bank account in the past.
Please any help on this.
Thank youPlease check whether you have the following SAP notes implemented:-
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=888389
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925221
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1000955
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1268620
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1275613
After implementing these, your problem should be solved.
Regards,
Gaurav -
GLT0004 - Document splitting causes causes field overflow for currency type
Hi,
Has anyone faced this error while performing MIGO?
Error " GLT0004 - Document splitting causes causes field overflow for currency type 10 in row 002)
am refering to note 1072850, but cannot find any relevant information.
Would appreciate any replies on this.
Thanks in advance,
JHi,
I have resolved the problem ,
Business transaction for document type WE changed to 0600 from 0000.
J -
Help! asp - Dreamweaver cannot find an editor for this type of extension!
Hi Guys
I'm using CC 2014. I'm running a couple of websites where I made the contact pages using a .asp extension. I need to urgently modify some of these contact pages but I get this error saying Dreamweaver cannot open the asp pages. Can anyone help or advise me on what to do please?
Found the answer that works to open the page in this thread: Can Not Open ASPX Files In Dreamweaver CC ? However I cannot save any files as ASP as that extension seems to have disappeared. How do I save asp contact pages in future?
Regards,
Graham
Message was edited by: Graham Austinglaustin wrote:
However I cannot save any files as ASP as that extension seems to have disappeared. How do I save asp contact pages in future?
Sure you can, rather than saving the file with the default .html, replace the .html with .asp. -
Hi why I can't download itunes on my hubby's laptop?It showing an error message "windows cannot find C:\document and settings\pistolero\mymusic... We have itunes before and he accidentally delete it..
... We have itunes before and he accidentally delete it..
If Windows cannot find then the path you referenced (C:\document and settings\pistolero\mymusic...) then it is gone.
Download and install iTunes again: http://www.apple.com/itunes/
Once iTunes is installed you can download your purchased music again. This assumes what you purchased is still available in the Store. Here is the procedure:
Launch iTunes.
Click on iTunes Store on the left
On the right you will see this
Sign in with your Apple ID, then click on "Purchased" (with the orange blob)
On the summary page that appears select the tab "Not on This Computer" on the right.
On the list that appears, select what you want and then click the "Download" button. -
[SOLVED] internal error Cannot find suitable emulator for x86_64
Hi,
After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
Systemd gave me the following:
% systemctl status libvirtd
libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
Main PID: 1499 (libvirtd)
CGroup: name=systemd:/system/libvirtd.service
├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
└─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
% grep vmx /proc/cpuinfo | uniq -c
8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
Can anyone help me? Has anyone else faced a similar problem?
Here are some version info:
local/libvirt 1.0.6-1
API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
local/qemu 1.4.2-1
A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
Of which, qemu got updated just today. I will try rolling back to older version and post and update.
Ninja edit: Looks to be qemu. Just running qemu gives me this error:
% qemu-system-x86_64
qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
EDIT: The resolution was
pacman -S libiscsi libaio
systemctl restart libvirtd
EDIT2: Made subject line better searchable
Last edited by railmaniac (2013-06-08 04:19:24)HI,
First of all thanks a lot for this post. I am facing the same issue since yest.
After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
But I am not sure if I can get back my missing VMs .
I am new to linux. Kindly guide me on how I can get back those VMs.
[root@skoduri lib64]# ls /etc/libvirt/qemu/
networks rhel6-vm2.xml rhel6.xml
[root@skoduri lib64]#
[root@skoduri lib64]# ls /etc/libvirt/storage/
autostart default.xml storage_1.xml
[root@skoduri lib64]#
[root@skoduri lib64]#
Thanks,
Soumya -
I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this on the apple site
If the phone has been hacked, we can not offer advice on Apple's support site.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
DimitriHi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Error code: 2147778144 Cannot find the QE property.
I have been working to get Coldfusion 8 and Crystal Enterprise 10 to work together. The following were two approaches I knew of to try:
1) using Crystal "unmanaged URL reporting":
a href="AOC_Summary.rpt?prompt0=#variables.Record_Month#&prompt1=#variables.Fiscal_Year#&user0=userid&password0=pswdn">AOC SUMMARY</a>
2) using the Coldfusion <cfreport> tag:
<cfreport report = "AOC_Summary.rpt"
dataSource = "#variables.dsn#"
username = "userid"
password = "pswd">
{AB145_AMTS.REC_MONTH} = 5 and
{AB145_AMTS.FISCAL_YEAR} = 8
</cfreport>
I got the CFREPORT tag to work but was disappointed to find that it only rendered the report in HTML. The reports we have been producing with our current configuration of CF4.5 & CR 8.5 can be saved as PDF's. So I abandoned the Coldfusion <cfreport> tag to see if I could get the Crystal "unmanaged URL reporting" to work. This included me trying to find any documentation anywhere to guide me along with going into Crystal Admin and 'experimenting' to see if there was anything I needed to do there to make the unmanaged URL reporting work.
Management is now telling me that producing the report in HTML is acceptable. I am now trying to set up a demo for management. When I went back into my CF code and uncommented the work I had done with the CFREPORT tag (which had been working at the time I commented it out), I receive the following error code.
CrystalReport Integration Exception.
Error code: 2147778144 Cannot find the QE property.
Error source: Crystal Reports ActiveX Designer
I have tried searching the SAP site to find more information on this error message to no avail. Any guidance would be greatly appreciated.
Regards,
:)mary
Edited by: Mary Fowler on Aug 21, 2008 7:21 PMI found my mistake. Used wrong .rpt file. (head drooped, tail between the legs)
Thank you for being here!
:)mary -
Document splitting causes field overflow for currency type 00 in row 003
Hi ,
Friends ,
Our some of sales bills are stucking iduring posting to finance after upgrading support packages, earlier there was no any problem.
we are trying to post by tcode vf02 , it is throughing an error message
Document splitting causes field overflow for currency type 00 in row 003
Message no. GLT0004
We are not getting any solution .
We have raised a message to sap support , but not getting proper solution,
Please guid us how can we solve this.
SS
Mobile no. 9810477923- Sundeep GuptaThanks for all.
we have solved this issue after change some customization according sap support consultant reply as under.
you have 3 different issues within your SD- new g/L interface.
The most critical one is the fact that you substitute PRCTR and
Segment assignemnts into line items to be processed by rule based
split. This leads to the fact that you will only those cases will be
able to post document in case the assignemnts are unique,
which means no different kind of prctr, segment and business area
assignments but only one single kind. This makes no sence at all.
Please see my last reply regarding this most critical issue.
This needs to be solved from Consulting point of view.
Regards.
SS
Edited by: Lakshmipathi on Dec 22, 2010 12:21 PM
When you say it is answered why you have closed the thread with Closed but Unanswered. Please change it to "Answered". -
Data Manger error: the system cannot find the file specified.
Hi,
I am using VPN to connect to MDM repository and get error:
the system cannot find the file specified. Windows sockets error code 2. And forced exit data manager. However I can login the other repository on the MDM server. Can you suggest any way to fix? Thanks!
DavidIt really does sound as if you are having a problem with ports. If you are able to connect to even one repository, then the problem is not with the Data Manager.
Here is how you can check:
1) Open the MDM Console, and note the port numbers of the loaded repositories.
2) Now open a Command Prompt window and type the following command:
telnet [mdm server] [repository port]
(you can use either the machine name or IP address for mdm server).
For example:
telnet 10.20.30.40 5500
You should get an empty command-type window with no error messages. This indicates success. You can close the window by clicking on the "X". Try this with the one repository which works in the DM, and then with the other repositories.
Let us know the results,
Walter -
Error "The System cannot find the specified" when installing XI3.1 FP1.3
Error "The System cannot find the specified" happened when installing XI3.1 FP1.3 to client machine, however the installation is OK to server.
After the error, go to Control Panel -> Add or Remove Programs, and observe.
BusinessObjects Enterprise XI 3.1 Client Tools is installed,
but BusinessObjects Enterprise XI 3.1 Client Tools Japanese Language Pack is not.
And Language Pack install log is not written.
The same error happened when installing .net2.0.
The installation for FP1.2 is OK.
Would you tell me what reason probablely this issue is?
Thanks.Hello Sarah,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk -
Error Message= x Cannot find the HTML help browser installed on your system.
Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
The error message states, "Cannot find the HTML help browser installed on your system."
Thank you!Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Cannot find the classfile for javax.mail.internet.AddressException
Hi,
Scenario is SAPCRM 7.0/ECC.
We are trying to extend the EmailAction class.
The error bieng faced is
Cannot find the classfile for javax.mail.internet.AddressException.
We have added crm/isa/lwc to the used Dcs but still this error is there.
Mail.jar is also present in the system.
We are not able to make out what exactly the issue is.
Please help.
Thanks,
RohitHi Rohit,
Did you ever find the solution to this problem? We're encountering the same error message.
Thanks!
Joe -
Cannot find CFML template for custom tag
Why am I getting this error when my code looks like this?
Cannot find CFML template for custom tag UPSPrice.
ColdFusion attempted looking in the tree of installed custom tags but did not find a custom tag with this name. If you are using per-applica
<Cfif NOT form.shipzip IS "">
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.shipzip#" WEIGHT="#getshipweight.totwei#">
<cfelse>
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.zip#" WEIGHT="#getshipweight.totwei#">
</cfif>UPSPrice.cfm file:
<!---
NAME:
CF_UPSPrice
DESCRIPTION:
Cold Fusion custom tag obtain UPS shipping costs from ups.com.
ATTRIBUTES:
CALLTAG - (optional) Electronic or basic call tag issued, valid options
are NONE BASIC or ELECTRONIC, defaults to NONE.
COD - (optional) Package is being sent C.O.D., valid options are YES
and NO, defaults to NO.
FROM - (required) Source (ship from) postal code.
HANDLING - (optional) Requires special handling (eg. - any article that
is not fully encased in an outside shipping container,
or any package that exceeds 60 inches in length).
HAZARD - (optional) Package contains hazardous material, valid options are YES
and NO, defaults to NO.
HEIGHT - (optional) Height (in inches) of oversized package.
LENGTH - (optional) Length (in inches) of oversized package.
OVERSIZED - (optional) Package is oversized, valid options are YES and NO,
defaults to NO.
RESPONSE - (optional) Delivery confirmation service, valid options are
NONE BASIC SIGNATURE ALTERNATE or ALL, defaults to
NONE.
SATDELIV - (optional) Saturday delivery, valid options are YES and NO,
defaults to NO.
SATPICKUP - (optional) Saturday pickup, valid options are YES and NO,
defaults to NO.
SERVICE - (required) UPS Service ID, valid service IDs are:
1DM - Next Day Air Early AM
1DML - Next Day Air Early AM Letter
1DA - Next Day Air
1DAL - Next Day Air Letter
1DP - Next Day Air Saver
1DPL - Next Day Air Saver Letter
2DM - 2nd Day Air A.M.
2DA - 2nd Day Air
2DML - 2nd Day Air A.M. Letter
2DAL - 2nd Day Air Letter
3DS - 3 Day Select
GNDCOM - Ground Commercial
GNDRES - Ground Residential
SHIPNOT1 - (optional) First ship notification, valid options are NONE
DOMESTIC or INTERNATIONAL, defaults to NONE.
SHIPNOT2 - (optional) Second ship notification, valid options are NONE
DOMESTIC or INTERNATIONAL, defaults to NONE.
TOCOUNTRY - (optional) Destination country code, defaults to US if not
specified. Visit the UPS site for a complete list of
valid two letter country codes.
TO - (required) Destination (ship to) postal code.
VALUE - (optional) Declared value for carrier liability, carrier assumes
$100 by default.
VERBCONF - (optional) Verbal confirmation of delivery, valid options are YES
and NO, defaults to NO.
WEIGHT - (required) Weight (in pounds) of package, fractions may be used.
WIDTH - (optional) Width (in inches) of oversized package.
NOTES:
This tag submits a shipping cost request to UPS for processing, and returns
price and shipping information. CF_UPSPrice sets the following variables that
you may use within your template after the call to CF_UPSPrice:
UPS_BaseCharge - Base shipping charge.
UPS_Charge - Total charge.
UPS_Error - Error message, if there was one.
UPS_ErrorCode - Error code, if there was one.
UPS_FromCountry - Source country code.
UPS_FromPostal - Source postal code.
UPS_GuaranteedBy - Guranteed delivery time.
UPS_OptionalCharge - Total of optional charges.
UPS_Service - UPS service ID.
UPS_Success - YES if request was successful, NO if not.
UPS_ToCountry - Destination country code.
UPS_ToPostal - Destination postal code.
UPS_ToZone - Destination zone.
UPS_Weight - Billed weight.
USAGE:
To use just call <CF_UPSPrice> from within your Cold Fusion template,
passing at least the required attributes TO FROM SERVICE and WEIGHT.
EXAMPLES:
Obtain price for next day package from NY to CA:
<CF_UPSPrice SERVICE="1DA" FROM="11213" TO="90046" WEIGHT="1.5">
<CFOUTPUT>Cost is #DollarFormat(UPS_Charge)#</CFOUTPUT>
Sending a oversized package C.O.D. via second day air:
<CF_UPSPrice SERVICE="2DA" FROM="11213" TO="90046"
WEIGHT="1.5" HEIGHT="13" WIDTH="12" LENGTH="20" COD="Yes">
Using form fields:
<CF_UPSPrice SERVICE="#service#" FROM="#from#" TO="#to#" WEIGHT="#weight#">
AUTHOR:
Ben Forta ([email protected]) 10/14/97
With help from Dave Beckstrom ([email protected])
--->
<!--- Initialize variables --->
<CFSET proceed = "Yes">
<CFSET error_message = "">
<!--- Get UPS service --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.service")>
<CFSET product = ATTRIBUTES.service>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "SERVICE must be specified!">
</CFIF>
</CFIF>
<!--- Get destination postal code --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.to")>
<CFSET destPostal = ATTRIBUTES.to>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "TO postal code must be specified!">
</CFIF>
</CFIF>
<!--- Get source postal code --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.from")>
<CFSET origPostal = ATTRIBUTES.from>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "FROM postal code must be specified!">
</CFIF>
</CFIF>
<!--- Get weight --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.weight")>
<CFSET weight = ATTRIBUTES.weight>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "WEIGHT postal code must be specified!">
</CFIF>
</CFIF>
<!--- If all okay, process other options --->
<CFIF proceed>
<!--- Get destination country --->
<CFSET destCountry = "US">
<CFIF IsDefined("ATTRIBUTES.tocountry")>
<CFSET destCountry = ATTRIBUTES.tocountry>
</CFIF>
<!--- Get oversized --->
<CFSET oversized = "0">
<CFIF IsDefined("ATTRIBUTES.oversized")>
<CFIF ATTRIBUTES.oversized>
<CFSET oversized = "1">
</CFIF>
</CFIF>
<!--- Get COD --->
<CFSET cod = "0">
<CFIF IsDefined("ATTRIBUTES.cod")>
<CFIF ATTRIBUTES.cod>
<CFSET cod = "1">
</CFIF>
</CFIF>
<!--- Get hazard --->
<CFSET hazard = "0">
<CFIF IsDefined("ATTRIBUTES.hazard")>
<CFIF ATTRIBUTES.hazard>
<CFSET hazard = "1">
</CFIF>
</CFIF>
<!--- Get handling --->
<CFSET handling = "0">
<CFIF IsDefined("ATTRIBUTES.handling")>
<CFIF ATTRIBUTES.handling>
<CFSET handling = "1">
</CFIF>
</CFIF>
<!--- Get calltag --->
<CFSET calltag = "0">
<CFIF IsDefined("ATTRIBUTES.calltag")>
<CFIF ATTRIBUTES.calltag IS "BASIC">
<CFSET calltag = "1">
<CFELSEIF ATTRIBUTES.calltag IS "ELECTRONIC">
<CFSET calltag = "2">
</CFIF>
</CFIF>
<!--- Get Saturday delivery --->
<CFSET saturdaydelivery = "0">
<CFIF IsDefined("ATTRIBUTES.satdeliv")>
<CFIF ATTRIBUTES.satdeliv>
<CFSET saturdaydelivery = "1">
</CFIF>
</CFIF>
<!--- Get Saturday pickup --->
<CFSET saturdaypickup = "0">
<CFIF IsDefined("ATTRIBUTES.satpickup")>
<CFIF ATTRIBUTES.satpickup>
<CFSET saturdaypickup = "1">
</CFIF>
</CFIF>
<!--- Get response --->
<CFSET response = "0">
<CFIF IsDefined("ATTRIBUTES.response")>
<CFIF ATTRIBUTES.response IS "BASIC">
<CFSET response = "1">
<CFELSEIF ATTRIBUTES.response IS "SIGNATURE">
<CFSET response = "2">
<CFELSEIF ATTRIBUTES.response IS "ALTERNATE">
<CFSET response = "3">
<CFELSEIF ATTRIBUTES.response IS "ALL">
<CFSET response = "4">
</CFIF>
</CFIF>
<!--- Get vcd --->
<CFSET vcd = "0">
<CFIF IsDefined("ATTRIBUTES.verbconf")>
<CFIF ATTRIBUTES.verbconf>
<CFSET vcd = "1">
</CFIF>
</CFIF>
<!--- Get first ship notify --->
<CFSET firstshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot1")>
<CFIF ATTRIBUTES.shipnot1 IS "DOMESTIC">
<CFSET firstshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot1 IS "INTERNATIONAL">
<CFSET firstshipnotify = "2">
</CFIF>
</CFIF>
<!--- Get second ship notify --->
<CFSET secondshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot2")>
<CFIF ATTRIBUTES.shipnot2 IS "DOMESTIC">
<CFSET secondshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot2 IS "INTERNATIONAL">
<CFSET secondshipnotify = "2">
</CFIF>
</CFIF>
</CFIF> <!--- End process params --->
<!--- If have all params, process request --->
<CFIF proceed>
<CFHTTP
URL="http://www.ups.com/using/services/rave/qcostcgi.cgi"
METHOD="POST"
>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="accept_UPS_license_agreement" VALUE="yes">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="10_action" VALUE="3">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="13_product" VALUE="#product#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="15_origPostal" VALUE="#origPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="19_destPostal" VALUE="#destPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="22_destCountry" VALUE="#destCountry#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="23_weight" VALUE="#weight#">
<CFIF IsDefined("ATTRIBUTES.value")><CFHTTPPARAM TYPE="FORMFIELD" NAME="24_value" VALUE="#ATTRIBUTES.value#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.length")><CFHTTPPARAM TYPE="FORMFIELD" NAME="25_length" VALUE="#ATTRIBUTES.length#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.width")><CFHTTPPARAM TYPE="FORMFIELD" NAME="26_width" VALUE="#ATTRIBUTES.width#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.height")><CFHTTPPARAM TYPE="FORMFIELD" NAME="27_height" VALUE="#ATTRIBUTES.height#"></CFIF>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="29_oversized" VALUE="#oversized#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="30_cod" VALUE="#cod#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="33_hazard" VALUE="#hazard#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="34_handling" VALUE="#handling#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="35_calltag" VALUE="#calltag#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="37_saturdaydelivery" VALUE="#saturdaydelivery#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="38_saturdaypickup" VALUE="#saturdaypickup#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="39_response" VALUE="#response#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="43_vcd" VALUE="#vcd#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="44_firstshipnotify" VALUE="#firstshipnotify#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="45_secondshipnotify" VALUE="#firstshipnotify#">
</CFHTTP>
<!--- Check if succeeded --->
<CFIF ListFirst(CFHTTP.FileContent, "%") IS "UPSOnLine3">
<!--- Success, set variables --->
<CFSET CALLER.UPS_Success = "Yes">
<CFSET CALLER.UPS_Service = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_FromPostal = ListGetAt(CFHTTP.FileContent, 3, "%")>
<CFSET CALLER.UPS_FromCountry = ListGetAt(CFHTTP.FileContent, 4, "%")>
<CFSET CALLER.UPS_ToPostal = ListGetAt(CFHTTP.FileContent, 5, "%")>
<CFSET CALLER.UPS_ToCountry = ListGetAt(CFHTTP.FileContent, 6, "%")>
<CFSET CALLER.UPS_ToZone = ListGetAt(CFHTTP.FileContent, 7, "%")>
<CFSET CALLER.UPS_Weight = ListGetAt(CFHTTP.FileContent, 8, "%")>
<CFSET CALLER.UPS_BaseCharge = ListGetAt(CFHTTP.FileContent, 9, "%")>
<CFSET CALLER.UPS_OptionalCharge = ListGetAt(CFHTTP.FileContent, 10, "%")>
<CFSET CALLER.UPS_Charge = ListGetAt(CFHTTP.FileContent, 11, "%")>
<CFSET CALLER.UPS_GuaranteedBy = ListGetAt(CFHTTP.FileContent, 12, "%")>
<CFSET CALLER.UPS_Error = "">
<CFSET CALLER.UPS_ErrorCode = "">
<CFELSE>
<!--- Failed, set variables and error message --->
<CFSET CALLER.UPS_Success = "No">
<CFSET CALLER.UPS_Service = "">
<CFSET CALLER.UPS_FromPostal = "">
<CFSET CALLER.UPS_FromCountry = "">
<CFSET CALLER.UPS_ToPostal = "">
<CFSET CALLER.UPS_ToCountry = "">
<CFSET CALLER.UPS_ToZone = "">
<CFSET CALLER.UPS_Weight = "">
<CFSET CALLER.UPS_BaseCharge = "">
<CFSET CALLER.UPS_OptionalCharge = "">
<CFSET CALLER.UPS_Charge = "">
<CFSET CALLER.UPS_GuaranteedBy = "">
<CFSET CALLER.UPS_Error = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_ErrorCode = ListGetAt(CFHTTP.FileContent, 3, "%")>
</CFIF>
<CFELSE>
<!--- Failed, display error message, and abort --->
<CFOUTPUT><H1>Error: #error_message#</H1></CFOUTPUT>
<CFABORT>
</CFIF>
Maybe you are looking for
-
Count # of days in stampdate column and send email if days 30
I want to create a procedure so that it will be called to see if the user has updated their project within the last 30 days. I have the following tables VALIDUSER table has UserID and EmailAddress columns, and FOLDER table has StampUser, StampDate an
-
Live Updating Smart Playlist... but not live updating iPod?
I have several video files that I want to convert to iPod-compatible MP4. I have a program to do the conversion in a batch mode and then add the files to my iTunes library. I also have a live-updating Smart Playlist (for all files where the Kind incl
-
SERVICE BATTERY ON MACBOOK PRO 13" MID2010
I replaced the battery on my MACBOOKPRO 13" with an OEM battery but the battery indicator still says "Service Battery". I did an SMC reset and nothing happened. I tried to restart and the message is still there. It is charging just fine and holds the
-
Why I always get the error(ORA-00600)?
Why I always get the error(ORA-00600)? My database Oracle 9.2.0.1.0 I installed Oracle Jdeveloper 9i on my computer. OS:windows2000 My program: Class.forName("oracle.jdbc.driver.OracleDriver"); con =java.sql.DriverManager.getConnection("jdbc:oracle:t
-
I upgraded the device software over the weekend, and can't see any difference. None of the apps I was expecting are there. Tried re-downloading, but get a message that latest software is already loaded. New version no. does NOT show up in About. Just