Error DTP Urgent

Hi Gurus,
This proplem is on production system so, any help is appreciated.
One error appeared while executing the DTP. The error handling for the dtp is Valid Records Update, No Reporting (Request Red).
I corrected the error in the error stack and I created an error DTP. I executed the DTP and it has status green.
The problem is that the status of the previous DTP (the normal delta one) remaines RED. therefore, when I try to run it again, I get the well known error message:
"Data has to be updated to the data target of
this DTP in serialPrevious request has status
''Red''This request must be deleted or repaired
before a new request can be started "
Is there any other action that I should take? I have read KJ's blog and I cannot find anything else.
thanks a lot!
Andreea

HI Roberto,
Thanks for the suggestion. Unfortunately I am loading Master data so I don't believe deleting the request is an option. The red status DTP has loaded all the records in the PSA minus one (the errore). I was able to load the corrected record but the status of the previous DTP is still red.
I wouldn't like to change the update mode because the DTP was created by another colleague and i don't know what might have been the reasons for his choice.
Is there any other way to slve this problem?
Thanks a lot!
Andreea

Similar Messages

Error in Data Transfer Process (DTP) Urgent!

Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nips

Please do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent!

Changing update mode in Error DTP

Hi Gurus,
I have some issues with data in PSA. I am trying to solve it using Error DTP.
While Executing DTP one record failed to load giving bad request. Now i created an error DTP. By default the extraction mode is Delta.
DTP extraction Mode->Full
Error DTP Extraction Mode -> Delta; How can i make it full. If i amm trying to change it, The option is disabled.
Thanks in advance!
Regards
Anu

Hi Anu,
In my system original DTP is full and when i create error DTP, i got error DTP extraction mode is full.
Yes you are right, it is disabled.can you check the update mode of your original DTP once.
once the error DTP is created, we can not change the update of it.
Regards,
Venkatesh.

Error DTP is not working.

Hi
I have a question regarding DTP error handling. I have erronious data on PSA, now i am correcting data in PSA and loading to ODS and activating.As it is a full load, I want to keep these records in an another table like error PSA in 3.x. How it is possible in BI. I have created Error DTP which will post error records in Error stack and dont let the load fail. But it is not working.
Please help me.
Haaris

HI,
On the Update tab page in the data transfer process (DTP), the error handling settings allow you to control how the system responds if errors occur in the data records when data is transferred from a DTP source to a DTP target.
These settings were previously made in the Info Package. When using data transfer processes, Info Packages only write to the PSA. Therefore, error handling settings are no longer made in the Info Package but in the data transfer process.
Settings for Error Handling
For a data transfer process (DTP), you can specify how you want the system to respond when data records contain errors. If you activate error handling, the records with errors are written to a request-based database table (PSA table). This is the error stack. You can use a special data transfer process, the error DTP, to update the records to the target.
Temporary storage is available after each processing step of the DTP request. This allows you to determine the processing step in which the error occurred.
"Repairing" with Error DTP
You create an error DTP for an active data transfer process on the Update tab page. You run it directly in the background or include it in a process chain so that you can schedule it regularly in the context of your process chain. The error DTP uses the full update mode to extract data from the error stack (in this case, the source of the DTP) and transfer it to the target that you have already defined in the data transfer process.
Thanks/Tarak

Conversion of Logical System name for "Error DTP" is not working

Hi All,
I have created a DTP and corresponding "Error DTP" for handling the Error records in development.
But when i move the both the DTP's to Consilidation systems,
DTP is getting converted to the consolidation R/3 systems (Example: TQS).
But the "Error DTP" is not getting converted with the source systems as R/3 cosolidation systems (TQS) and remains as source systems as Development R/3 system(TDS).
We are in BI 7.0 version with SP level of 13.Can anyone help how to resolve this issue? or any OSS note available to resolve this issue.
Thanks,
Muruganand.K

Closing Thread.

Adv or BW report over abap report,Abt aggr,Abt error DTP

Hi experts
Please
1can anybody say the advantages of BW report compared to ABAP report.
2. while creating aggregates,IF we choose "Generate proposal" button .How and wht basis teh system will create aggregate.
3.What is Error DTP in BI 7.
Thanks in advance
I will reward points
pradeep

Hi Pradeep
Main diffrence is BW works on multidimentional model or using OLAP for data stagging
and r3 works on OLTP.
BW reports seams like R3 ALV reports but BW reports are advance and used by higher management persons who want there data suddenly .
BW reports took data from diffrent diffrent tools and generate very user friendly reports such as DB connect UD connect and Flat file .
basically BW reports used for alalysis purpose for quick dission in R3 report u cannot see past data but in bw report u can easly pull data from r3 and stored it into cube for future use its main point .
Aggrigate : Thes are used for performance after using aggrigate your query performance incress there are 3 thyes of aggrigate and those aggrigate play main role in performance issues,
DTP are used for data stagging in BW3.5 its done by PSA ..
Assign Points if its helpful
Thanks
Ankit

Delete row in Error DTP

Hi,
We are using Error DTP's.
Is it possible to delete a single record from an Error DTP?
Can somebody tell me how?
Regards,
Jos.

Once data fails you can see those records in error stock
open that errostock and select the record which one you dont to delete and then click on save button
later execute the error dtp
now it will only process the records which are you not deleted,
Regards
Srini

Steps to create an error DTP

Hello,
What are the precise steps to create an error DTP?
I tried this by going to my DTP > Update tab > click on button "Creating Error DTPs" > provide package and transport number
BUT, I get error:
"Invalid call sequence for interfaces when recording changes"
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator
I have BI 7.0, SP 7
Thank you.
Mario

Hi ,
Pls check this blog on 'Error DTP' - BI@2004s
/people/kamaljeet.kharbanda/blog/2006/12/07/error-dtp--bi2004s
Hope this helps,
regards
CSM Reddy

Transporting Process Chains-includes the ERROR DTPs in the Target System

Hello Gurus,
Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
This will cause a problem
1.these would run parallel to the regular DTPs.
2.no of back ground processes running at any point will be beyond our limit.
Let me know if you have faced the same issue and how you resolved it.
Thanks
Jagadish

Hi DPN,
Check oout this thread. This might solve yuor problem.
Errors in Transportation
Thanks and Regards
Subray Hegde

Types of DTP , Diff between Standard and Error DTP

Hi experts,
What is DTP , are the Types of DTP , Diff between Standard and Error DTP , how it works in BI 7.0.
I will assign points for your valuable answers.

Hello ,
Data transfer process (DTP) to transfer data within BI from one persistent object to another object, in accordance with certain transformations and filters. In this respect, it replaces the data mart interface and the InfoPackage. As of SAP NetWeaver 7.0, the InfoPackage only loads data to the entry layer of BI (PSA).
The data transfer process makes the transfer processes in the data warehousing layer more transparent. Optimized parallel processing improves the performance of the transfer process (the data transfer process determines the processing mode). You can use the data transfer process to separate delta processes for different targets and you can use filter options between the persistent objects on various levels. For example, you can use filters between a DataStore object and an InfoCube.
Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
1.Benefit: Data Distributionwithin BI Capabilities (from PSA or InfoProviders to InfoProviders)
2.Improved transparency of staging processes across data warehouselayers (PSA, DWH layer, ODS layer, Architected Data Marts)
3.Improved performance and high scalability
4.Separation of delta mechanism for different data targets: delta capability is controlledby the DTP
5.Enhanced filtering in dataflow
6.Repair modus based on temporary buffers (buffers keep complete set of data)
See these docs for more info
[Data Transfer Process |http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/content.htm]
[Enterprise Data Warehouse (EDW)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a]
[What's New with SAP NetWeaver 2004s - Detailed|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3]
[SAP NetWeaver 7.0 ETL and EII|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b24053-654e-2a10-4180-b0e7c7b4c9f2]
[How to Create Monitor Entries from a Transformation Routine (NW7.0)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50fda171-e36e-2910-9290-e3dab26c50b5]
FAQ on SAP NetWeaver 2004s
[Modeling the Enterprise Data Warehousing for SAP NetWeaver 2004s FAQ|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7c2a7c65-0901-0010-5e8c-be0ad9c05a31]
[Enterprise Data Warehousing for SAP NetWeaver 2004s FAQ|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c9f5fb91-0c01-0010-67a8-fd35946e9403]
Thanks
Chandran

How to handle the error stag(error DTP)

Hi Friends, i got some records in the error stag while loading data from Dayta source to Master data target and this is in the production. we didn't created the Error DTP in the production. How to delete the error reocrds from the error stag if we dont want to update it to the target.And the request is showing in yellow due to that iam not able to delete the dtp request from the target.
any help...to proceed with this error.
thanks in advance.

HI
You are not able to delete the DTP from target?
Change the request to RED
Double clicking on theTrafic signal... then manually change the request to RED and Then you will be able to delete it.
Hope this help...
Dev

BI Process Chain - Error DTP

Hi Friends
I have a Question regarding executing error DTP.
We are going live next month. In a metachain we are loading 3 master data process chains and one transaction data process chain and the meta chain is a daily load.
There are duplicate records in the error stack which ended the process chain with errors and also failed the next day load as the duplicate records in the error stack were not fixed. And its a daily master data load triggered in one of the process chain.
I had fixed the records in error stack and enabled handle duplicate records setting in error DTP and tried to save it.
It prompted a message
     "Note, for time-dependent data the source field
      containing DATETO information must not be selected
      in the semantic DTP key."
[do i need to change the handle duplicate record setting for the main DTP also?] I need to execute this error DTP and it should execute the remaining pending/cancelled processes in that process chain.
It should not trigger further loads of the process chains following this process chain even if I manually execute the error DTP. Because the following process chains were successful as there were no dependencies between the process chains.
even though i guess sometimes it happens that it triggers further loads in the process chains for some reason which are not dependent.
Good answers will be definitely rewarded.
Thanks
Lavanya...

Hi,
This is an information message. Go ahead and enable the duplicate key handling flag and then execute the error DTP.
That should load the data successfully.
Cheers,
Kedar

Error Stack and Error DTP

Hi All,
i have a doubt. Error DTP is used to to edit the error records then to load tha data
And error DTP is always full load.
If a have 100 records in my error DTP with same kind of problem eg:Special char problem do i need to edit all the 100 records??
2.As error DTP is full load , Do it take load data from Error stack or from PSA.
Thanks in advance

Hi,
Yes, u have to edit all the records with error and save and u can update to the target.
It loads from Error stack only.
At runtime, erroneous data records are written to an error stack if the error handling for the data transfer process is activated. You use the error stack to update the data to the target destination once the error is resolved.
Chk this Error handling...
http://help.sap.com/saphelp_nw70/helpdata/EN/42/fa1acfcf2c1aa2e10000000a422035/frameset.htm
In the above link refer to term Error Stack also...
rgds,

Error Stack and Error DTP-Doubts.

Hi Experts,
I have a doubt on Error Stacks and Error DTP's in BI 7.0.
For example i am doing a load that has 100 records and 10 of these records have some invalid characters and hence are showing up in the Error Stack.Now I know that i can change these records directly in the Error Stack and then use the Error DTP to process these 10 records.
But for the remaining 90 records the Error Handling in the Update tab is set to "No Update,No reporting" and hence the original request is red.How do I update these remaining 90 records?Is the only way to set Error Handling to "Valid Records Update,Reporting Possible(Request Green)" so that these error free 90 records are loaded and available for reporting?
Also what is the advantage of using of the Icon "Manually Post-Process Error Records" that exists in the DTP Monitor window against using Error DTP's?
Thanks
Aravind

Hi...
If it failed due to issues like Invalid char or error records, you may have the error data alone loaded to Error stack which you can edit and reload using an error DTP.
Else in case if your entire DTP failed, then you need to retrigger the DTP.
Handling of Data Records with Errors
http://help.sap.com/saphelp_nw70/helpdata/EN/42/fbd598481e1a61e10000000a422035/content.htm
Error Stack
http://help.sap.com/saphelp_nw70/helpdata/EN/42/fa1acfcf2c1aa2e10000000a422035/content.htm
Thanks
Assign points if this helps

Problem in Activating "Creating Error DTP" Button

Hi All,
I have created a DTP between an InfoCube and an Open Hub destination.
But in the UPDATE tab of the DTP, the "Creating Error DTP" option is not active(its blurred even in edit mode). How should i make the button active??

Hello Roy,
Pls refer this weblog
/people/kamaljeet.kharbanda/blog/2006/12/07/error-dtp--bi2004s
From Std SAP Help
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Thanks
Chandran

Error DTP Urgent

Similar Messages

Maybe you are looking for