Error due to effectivity type in CC01

Hi Team,
when creating a change number in CC01 T code, i am using parameter effectivity KUNDE referring to Customer.
When i create the chnage number, i get below mentioned error..
" No entries in database for object KUNDE_LO table AEEF "
I have done all relevant settings in customization suggest what we should do to resolve this ?
Best regards,
Shashi

Hi Experts,
I have made one mistake while uploading par file....
There was one generic service in par application, i did not change its name.. com.sap.netweaver.kmc.people|umeservice.
I think now my default umeservice is overwriteen by this one....
In service configuration I can see two services with same key..... under two par application.
How i can revert back these changes....
Regards
Baby

Similar Messages

Termination due to data type-Emigall

Hello,
Through Emigall, we have generated our structures to create business partner and contract account. If we preapre a sample file through data import and execute that file, the record is created without any error. But when we created our own file in text delimited format, and import that file, there is an error which occurs 'Termination due to data type' with message number EM109. But the strange thing is that the record is created. We dont know whether we should ignore this error or get rid of this error. Please can you guide us how do we get rid of this error.
Regards,
Charvi

Charvi,
I am not sure I understand the problem. I'll try to rephrase your statements and I'd appreciate your comments:
Through Emigall, we have generated our structures to create business partner and contract account
I assume you have created a hyper migration object including the PARTNER and ACCOUNT migration objects, right?
If we prepare a sample file through data import and execute that file, the record is created without any error
You are using the import file editor to create new data objects in a new import file, right? An the import file (created by the import file editor) can be loaded w/o any problems, right?
But when we created our own file in text delimited format ...
I understand, that you have created a text file and converted it into the binary file format. How did you do this? As an upload through the import file editor or through the conversion program REMIG_FILE_TRANSFORM?
The job is cancelled (error due to data type) but the data object is created?
This happens, when the database changes have been commited (after calling the service function module) and the next data record does contain a strange record data type (at least something that cannot be interpreted as such)
Certainly you should not ignore this error because the application log of this job will not be available after a cancellation. I suggest to analyse your text file. There might find some additional lines with or without with spaces or something else you should remove prior to a conversion.
Cheers,
Fritz

Import error due to character set difference?

hi,
hoping anyone to explain reason for the following import error.
here's the situation,
- export client used WE8MSWIN1252 charset (release v10.02.01)
- import server used WE8ISO8859P1 charset (release v10.1.0.4)
all tables appeared to be imported without error, except that import terminated unsuccesfully due to oracle error 2248
"ALTER SESSION SET PLSQL_OPTIMIZE_LEVEL =1 NLS-LENGTH_SEMANTICS = 'BYTE' PLSQL_CODE_TYPE = 'INTERPRETED' PLSQL_DEBUG = FALSE PLSQL_WARNING = 'DISABLE:ALL' PLSQL_CCFLAGS =''"
ORA-02248: invalid option for ALTER SESSION
was error due to the difference release version? char set conversion to non superset?
appreciate any help pls

It is difficult to say what is the current state of the database, so it is recommended to reexport and reimport the object definitions. You may miss some other stuff like object types, contraints, etc. Table data should be OK, so reexport should not include data.
As far as character sets are concerned, because of the difference between the export client character set and the import server character set, you may have lost some characters in the code range 0x80-0x9f. This includes Euro sign, TM, sign, "smart" quotes, en- and em-dash, etc. Use the Windows charmap.exe to see all the codes. If you have some of these codes in the source database, you have lost them on import (they got converted to the reverse quotation mark code 0xbf).
-- Sergiusz

Ssrs and script from was blocked due to mime type mismatch

Hi
I'm trying to add a script to my header on my SSRS report. I've been following this link:
http://blogs.infosupport.com/reporting-services-javascript-injection/
I get error stating:
SEC7112: Script from http//####/HCCReportsServer?/ReportsLibrary/script.js was blocked due to mime type mismatch
My code:
="<a href=""javascript:eval(unescape('function addScript(scriptFile){var head = document.getElementsByTagName(\'HEAD\')[0]; var script = document.createElement(\'script\'); script.setAttribute(\'language\', \'JScript\'); script.setAttribute(\'type\', \'text/Javascript\'); script.setAttribute(\'src\', scriptFile); head.appendChild(script);} addScript(\'http://dc1-sqlrs-d02/HCCReportsServer?/ReportsLibrary/script.js\');'))"">inject</a>"
Please help. This is urgent to get it working for a demo.
Thanks

Hi Sunette,
Based on my understanding, you come across an SEC7112 error when you inject JavaScript into the Reporting Services.
In your scenario, you should remove the below setting in the web.config file(Location: C:\inetpub\wwwroot\wss\VirtualDirectories\<your port>).
<add name="X-Content-Type-Options" value="nosniff" />
As we tested in our environment(SQL Server 2012,SharePoint 2013,IE 11), we can inject JavaScript successfully. Please refer our test steps and results:
1. Delete “X-Content-Type-Options" with value "nosniff" within the web.config file (Location: C:\inetpub\wwwroot\wss\VirtualDirectories\80).
2. Design the report as below, then deploy the report to the SharePoint site.
3. Create the script.js file with code below, and upload to the SharePoint site.
function test()
alert("The CHANGEME textbox will actually change…");
//var doc = window.frames[1][1].document;
var el = document.getElementsByTagName('span');
for (var nr=0; nr<el.length; nr++)
if (el[nr].innerHTML == "CHANGEME")
el[nr].innerHTML = "I FEEL LIKE A CHANGED TEXTBOX";
4. Run the report. Click the “inject”->”test”, the final results should look like below:
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

SAP RE-FX RERAPP - making Object Cash Flow posting while Partn.Rel. Cash flow gives Error (due to missing House Bank)

Hello Experts,
We have an issue with the Object Cash Flow makes postings while the Partner.Rel. Cash Flow gives an error due to missing House Bank in the Posting Parameters on the contract.
Result is an double/tripple etc. booking on the Object Cash Flow which not is showing on the Flow Overview in the contract and no booking on the Partner.Rel. Cash Flow.
This goes on until the missing House Bank is corrected.
We want to know if we can block the Object Cash Flow making definitive postings until the original Partner.Rel. Cash Flow is posted.
Hope to hear from you, thanks in advance!
Saskia Ismail

Hi.Saskia Ismail
You can think the 2-Type of posting procedure.
1. You just only manage 'Partner.Rel. Cash flow' of each condition & flow type.
    In this cases, you do not configure "Distribution Formula" on the "Condition type" configuration.
   (RECACUST>Conditions and Flows>Condition Types and Condition Groups)
2. You want to manage both of 'Partner.Rel. Cash flow' and 'Object Cash Flow'. but when you posting this cash flow, if you want to block the Object
   Cash Flow making, you can use 'Enhancements' of the 'RECACUST>Accounting>Automatically Generated Accounting
   Documents>Enhancements>Prevent Object Transfers' as below.
Prevent Object Transfers :
- You can use this BAdI if you want to suppress object transfers (transfer from the contract to assigned rental objects) during periodic posting.
- Implement the method SUPPRESS_TRANSFER_POSTING and set the parameter cf_suppress_transfer there to 'X'.
Regards,
Yeong Chul, Jeong

I get an error message for publication type

I am using itunes producer to load a book. An error message for "publication type" appears when I get to deliver content area. I am unable to fill in that category box when I go back to that particular screen. The drop down box there shows a check mark that will disappears immediately when clicked on. I know that "digital only" or "new release" needs to be put into that box, but am unable to get any other choices for the box and can not download the book due to error message. I did enter a price in the pricing box.
Thanks for any assistance,
Don

I'm having the same problem. Have you found the answer?

EWA problem - Session is ignored due to unknown type EWALERT SolMan

Hi All,
We have newly defined early watch report for few systems and report is getting generated successfully in solution manager system for all except one system. The RFCs from solman to satellite system and vice versa are working fine; both connection and authorization tests are successful. SDCCN is active and refresh session job is also running. In job log; there are no errors; but when we check in task log in SDCCN; there is one warning "Session is ignored due to unknown type EWALERT SolMan"
Could you please advise how to resolve this error and generate EWA report for missing SCM system. Solution manager is on EHP1 basis package level 6 and the satellite system is SCM system SCM 7.0.
I have tried deleting all sessions in satellite system and recreated; but no help.
Thanks,
Varun

Hello
Strange that you have applied the note 727998 and still the error persists.
I would say let's re-check the note 727998 and try to re-implement it. In satellite system, sdccn rfc to the solman should be the 'Master'. In solman, the service definition rfc should be sdcc_oss. I hope all RFC connections are already working fine.
Also go through the Note 216952 - Service Data Control Center (SDCC) - FAQ
Thanks

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards.

Getting error while creating condition type in SPRO

Hi ,
can somebdy tell me why i am getting the following error while creating condition type in SPRO
No valid change license available for message /sapcnd/
and also while rule determination using condition type we are getting the following error.
system error:system cannot read the structure for table
reg
venkat

Hi Venkat,
Do you have the error number code!?
Regards,
Michel Bohn

Error while migrating BLOB type data

Hi ,
I am migrating the data from oracle to oracle and both soruce and target tables have BLOB type field.
I am getting error when I am executing the interface with these blob fields. But My interface is successfull if I am not maaping this blob files.
Below is the error message.
ODI-1217: Session BLOB (162501) fails with return code 942.
ODI-1226: Step BLOB fails after 1 attempt(s).
ODI-1240: Flow BLOB fails while performing a Loading operation. This flow loads target table IMAGES.
ODI-1228: Task SrcSet0 (Loading) fails on the target ORACLE connection YAGLD.
Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exist
Thanks,
Patel.

Duplicate of
Error while migrating BLOB type data

Asset Retirement (ABAON) error - Posting with trans.type 210 not possible

HI All,
I was trying to sell an asset using transaction ABAON which is fully depreciated, but I am getting the error -
" Posting with trans.type 210 not possible (No acquisition posted)"
The Scenario is, there is an asset(car) which was uploaded during implimentation and it got depreciated fully in the month of april.
The same asset(car, which is fully depreciated) is sold for an amount of Rs 40000/-.
So, I was trying to post it with some revenue vlaue in transaction ABAON, but I am getting the above error.
(The Asset value was an uploaded during implimentation,it was not an acquisition value from SAP. It was an uploaded value from legacy data)
Could any one help in this, or let me know the correct process for this kind of transactions.
Awaiting for a reply.
Regards,
Upendra

HI Mamta,
Thanks for the reply.
While Uploading the data was uploaded as asset balance upload for prior year with value.
Plase let me know what do you propose, to be done for this.
Regards,

Error posting with trans.type 159 not possible (no aquisition posted)

Hello All,
A user has created an PO for asset with GR non valuated in 2007 and has performed a MIGO/GR in the same year 2007. Now in 2008 the user has received an invoice against the said asset and wants to post it thru Trans MIRO.
At the time of posting the invoice the user gets the error "posting with trans.type 159 not possible (no aquisition posted)" . Since this is a completely new asset and GR non valuated asset process is a standard in SAP why is the system recognising the transation type as 159 i/o trans type 100 ie new asset aquisition.
If i post a dummy value to the same asset using FB01 the system accepts the value but the same process if i intend to follow usin MIRO system does not allow.
Can you guys help me
Thanks
Nelson

Thanks Paul for your reply, I checked the depreciation key. inthe key the "Aqu only allowed in capitalization year is marked as NO"
Therefore the problem is not the depreciation key
Thanks
Nelson

Error with Exchange rate type

Hello all,
While releasing the billing document to accounting, getting the error:
'An exchange rate type is not defined for country US'.
In customer master, have maintained Exchange rate as 'M'.
where do we maintain the exchange rate type for country.
Thanks
Gauravjit.

HI Gauravjit,
Try this:
SPRO-F5- General Settings-Currencies-Define Translation ratos for currency translaction
Reward if it helps
regards
Srini

Muse JS Assert: Error calling selector function:Type error: Object has no method Muse Menu

When exporting html and viewing locally we receive the following error... This error disappears after removing menu from top of page. This error does not occur when viewed on Outdoors360.businesscatalyst.com (our temporary site)
Muse JS Assert: Error calling selector function:Type error: Object has no method Muse Menu
Any ideas??

I fix the problem.
I have carefully reviewed JAVASCRIPT files and I could see that these are not a major influence within the site, only are reference code and utilities of the same application.
By removing these files nothing has stopped working, I thought I would have some error in the sliders, or opacities, but no, nothing happened.
DELETE IT
FRANCISCO CATALDO DISEÑADOR GRÁFICO

Dealing with errors due to newly added/dropped columns

DB version:11g
I am not sure if i have created an unnecessarily large post to explain a simple issue. Anway, here it is.
I have been asked to code a package for Archiving .
We'll have two schemas;The original schema and an Archive schema (connected via a DB Link)
ORIGINAL Schema -------------------------> ARCHIVE Schema
               via DB Link          When records of certain tables in the ORIGINAL schema meet the archiving criteria (based on Number of Days Old, Status Code etc), it will be moved ('archived') to the ARCHIVE schema using the INSERT syntax
insert into arch_original@dblink
col1,
col2,
col3,
select col1,
col2,
col3,
from original_tableThe original table and its archive table has the same structure, except that the Archive table has an additional column called archived_date which just records when a record got archived.
create table original
col1 varchar2(33),
col2 varchar2(35),
empid number
create table arch_original
col1 varchar2(33),
col2 varchar2(35),
empid number,
archived_date date default sysdate not null
);We have tables with lots of columns(there are lots of tables with more than 100 columns) and when all column names are explicitly listed like the above syntax, the code becomes huge.
Alternative Syntax:
So i thougt of using the syntax
insert into arch_original select original.*,sysdate from original; -- sysdate will populate archived_date columnEventhough the code looks simple and short, i've noticed a drawback to this approach.
Drawback:
For the next release, if developers decide to add/drop a column in the ORIGINAL table in the Original Schema, that change should be reflected in the archive_table's (ARCHIVE schema) DDL script as well. It is practically impossible to keep track of all these changes during the development phase.
If i use
insert into arch_original select original.*,sysdate from original; syntax, you will realise that there is change in the table structure only when you encounter an error(due to missing/new column) in the Runtime. But, if you have all the column names listed explicitly like
insert into arch_original@dblink
(col1,
col2,
col3,
select col1,
col2,
col3,
from original_tablethen you'll encounter this error during the Compilation itself. I prefer the error due to a missing/new column during the Compilation itself rather than in Runtime.
So what do you guys think? I shouldn't go for
insert into arch_original select original.*,sysdate from original; syntax because of the above Drawback. Right?

What advantage would it bring if i make ARCHIVED_DATE as the first column in the ARCHIVE tables?The advantage is that if you'll add a column in the future on both original and archived tables the insert statement will work anyway...
SQL> create table x (a number, b number);
Table created.
SQL> create table y (arc_date date, a number, b number);
Table created.
SQL> insert into x values (1,1);
1 row created.
SQL> insert into x values (2,2);
1 row created.
SQL> select * from x;
         A          B
         1          1
         2          2
SQL> insert into y select sysdate, x.* from x;
2 rows created.
SQL> alter table x add (c number);
Table altered.
SQL> alter table y add (c number);
Table altered.
SQL> alter table x drop column b;
Table altered.
SQL> alter table y drop column b;
Table altered.
SQL> insert into x values (3,3);
1 row created.
SQL> insert into y select sysdate, x.* from x
2 where a=3;
1 row created.
SQL> select * from x;
         A          C
         1
         2
         3          3
SQL> select * from y;
ARC_DATE           A          C
25-JAN-10          1
25-JAN-10          2
25-JAN-10          3          3Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/01/23/la-forza-del-foglio-di-calcolo-in-una-query-la-clausola-model/]
Edited by: Massimo Ruocchio on Jan 25, 2010 12:44 PM
Added more explicative example

Error due to effectivity type in CC01

Similar Messages

Maybe you are looking for