Error Dummy items from Customizing have to be excluded @ Liquidity Planner

Dear Experts,
I want to try Liquidity Planner Calculation, using FLQAD,
when in selection screen i aready insert :
- Paying Company Code
- 1st Derivation Step : Query Sequence
- 1st Derivation Step : Exit Module
- 2st Derivation Step : Buffer Item
- 2st Derivation Step : Exit Module
- Test Run
- Detail List
so when Execute / F8, i get error message "Dummy items from Customizing have to be excluded"
please help me.
thx you.

You get this error if the liquidity items in FLQC2/FLQC13 and buffer item field of flqad selection screen are same.
Buffer item refers to liquidity items assigned to vendor/customer recon accounts.
To avoid this error donot use liquidity items from FLQC2/FLQC13 in FLQAD buffer item.

Similar Messages

Service Oriented workflow with items from customer

Dear Friends,
In SAP Business One how to handle the Service oriented workflow, which contains items from the customers? E.g. Electronic items repairing.

Hi,
Step1:Create a item master in the name of service,decide whether it has to be maintained as inventory item or not from the companys accounting person.
Step2:You can use AR invoice(Item type) where you can include the items used for repairing along with the service item created in the above step1.
Maintaining Inventory of the items (for repairing) received from the customer as well as the items required for the repairing jobs
Step3:As you have mentioned that the you are maintaining the item received from the customer,confirm with companys accounting person whether it also has to be maintained as inventory item or not.
Step4:You can use goods receipt for getting the items from the customer
Note:Its depends upon your requirement whether to use sales bom or not as suggested by one of the forum member

Error loading item from WAD

Hello,
I have problems with loading template from WAD to Browser.
I created the template and then pushed the button Execute in the browser. I can see only message: Error Loading item*
Can you help me pleas.
Thanks
Petr

Hello,
I created the template with one table, saved and executed in browser and I have again problem with loading item.
My problem has longer history, because I worked on BWT system normally(I created many templates and I had no problems with loading items) a one day I started to work and I saw this error message. Now I can´t execute any templates (inclusive of all that worked correctly before)
It´s possible that I made some change in WAD settings but I don´t know where....
Thanks
Petr

Automatic deletion of Items from Customs Declaration

Hello Experts,
I will be thankful to anyone could help me with this one : We need to automatically delete line items from declaration based on certain criteria before the first outbound message is sent. For example : The process should be : 4 items in invoice, but only 2 in the declaration (duty unpaid goods). It cannot filter the data in the Feeder system. I was hoping data proposal BADI could be the solution however It does not seem to work...
Your comments are appreciated,
Branislav Petricek

Dear Branko,
if you want to delete the items before creating the idoc while processing the message, you can use the Badi /SAPSLL/CUS_ECC. There you can modify the data that are sent to customs.
The items will still be physically available in the document itself but only the ones you do not filter will be sent.
best regards,
Christin

MDS_LOAD_COCKPIT Error: Create BP from Customer

I am creating BP from customer using cockpit transaction. While running PPO, I am getting the below two error for single customer.
No transfer of interval for object BU_PARTNER
Message no. NR028
Diagnosis
The last number of the internal interval should be assigned.
Number assignment usually begins in the following call at the start of the interval. However this function is blocked for some number range objects for technical system reasons.
Procedure
If possible extend the interval of the affected number range object. If this is not possible you must reorganize the relevant data and reset the interval status manually.
Business partner ##1 does not exist
Message no. R1201
Please suggest.
Thanks,
Arpit Kothari

check the number ranges of the customer account group, and the BP role to ensure they are aligned.

FBLPD1: Error creating BP from customer

Hi,
We are trying to migrate the master data from FI-AR to FSCM and, at a first we tried to use the transaction code MDS_LOAD_COCKPIT. But, for some reason that it was not clear the system did not creat the customer.
In that sense, we tried to create the business partner based on the customer data by using the transaction code FBLPD1 but the system gives an error message indicating that it was not possible.
By checking the transaction code MDS_PPO2 we check that the error given was:
"Address type XXDEFAULT does not exist: Address usage XXDEFAULT cannot be created"
"Application object BUPA: There is no BAPI field to screen field assignment"
"Address type XXDEFAULT does not exist: Address usage XXDEFAULT cannot be created"
Do you guys know what could be the issue ?
PS: Configuration done by using OSS Note 954816 and 956054.
Thanks in advance.
Bruno Sousa

Hi,
Thanks for your feedback.
I implemented the OSS Note 1254483 and i had also to add the XXDEFAULT entry in table TB009. After that it seemed to work.
But, i had a new error that, by checking the MDS_PPO2 transaction it stated:
"Application object BUPA: There is no BAPI field to screen field assignment"
"Enter an Industry".
In our customer we use the field "Industry Sector" and so i checked the view V_TBZ3R_BD (for BUPA object). The option "INDUSTRYSECTOR" is there so i'm guessing that in that view things are ok...
Do you know what it can be ?

VBA Userforms – Getting errors when item from combo box is not selected

Hi there
Thank you in advance for taking the time to check this out.
Objective:
I have 2 combo boxes, one is dependent on what has been selected in the first combo box (dynamic named range), they work fine except for an irritating error when the user accidentally clicks in the empty
Cmbox_IncCategory and it won’t allow the user to go back to the
cmbx_Category_Type box if the user forgot he had to make a selection from that first before selecting the
Cmbox_IncCategory.
The error that pops up is “Invalid property value”.
I tried having text in there to say “please select from Cmbox_IncCategory first, but that didn’t fix it.
I tried to ‘If error resume next’ but that didn’t like it either. Now I am stumped.
Main combo box= cmbx_Category_Type
2nd combo box (displaying a list dependent on what was selected in Main combo box)= Cmbox_IncCategory
I know there must be a way to fix it so that if a user clicks on the combo box, but doesn’t make a selection it won’t lock up the form.
Yes, it is a mandatory field, and I was considering using a message box to advise the user that this must be completed, but I am not sure how to do it (and avoid the errors
Here’s the current code I have for the combo boxes.
Me.Cmbox_IncCategory = "" 'Clears the contents of the 2nd combobox when another category is chosen
On Error Resume Next
'I can't seem to have the Incident Category combobox to be empty when the form is open _
I have tried Cmbox_IncCategory.Value = "", but I get an error. I then tried Cmbox_IncCategory.text = "" _
but also get the error. I don't know how else to get it to work .. I tried both codes in the _
form_initialize, but get an error ... I'm stumped !
Select Case Me.cmbx_Category_Type
Case "Crime"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_CRIME"
Case "Property Damage - Minor - NS"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_PROPRTY_NS"
Case "Property Damage - Significant - S"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_Proprty_S"
Case "Safety"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SAFETY"
Case "Security Breach"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_BREACH_S"
Case "Support"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SUPPORT"
Case "Vehicle"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_VEHICLE_S"
End Select
End Sub
I’d be really grateful if someone could help me out, or perhaps direct me to where I might find some coding that will achieve the result I am seeking.
This links to
My Sample form
With much gratitude,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Hi Peter,
Thank you for your quick response :) Brave man! :)
Both combo boxes are blank to start with (because nothing has been selected). If I click on the first combo box (cmbx_Category_Type) which lists the main events/category types, but I don't select any thing, and I click in the secondary box
(Cmbox_IncCategory) and then click on any other control, I get an “Invalid property value” error. When I click OK on the error (a few times) and I return to the code window, it gives no indication where/what is breaking
the code/causing the error. I have no choice but to exit the form by stopping in the code window.
If I click on the first textbox, (cmbx_Category_Type), and then do the right thing and make a selection, then I have no problems with the secondary textbox (Cmbox_IncCategory).
As I am not that up on VBA I am trying to follow your instructions... I have changed the code as follows, removed and replaced the rowsource name, but I encounter the very same problem.
When I changed my code from Me.Cmbox_IncCategory="" to yours myCombo.ListIndex = -1 (changing the combo box name to reflect my combo box name) and adding the second line of code ...
Me.Cmbox_IncCategory.ListIndex = 0 I still got the same behaviour and error.
I even tried moving each row of the named rows down one row (so that there would be a 'blank' row which could be selected to get out of trouble, but it wasn't very successful either.
Have you opened my form to see what happens, I included the link so whoever was looking at my problem (and yes, I have many I know), could see for themselves what it is doing/not doing.
The code now reads as below (is this what you meant?) - the results were as I mentioned above.
Me.Cmbox_IncCategory.ListIndex = -1 'Clears the contents of the 2nd combobox when another category is chosen
Me.Cmbox_IncCategory.ListIndex = 0
' On Error Resume Next
'I can't seem to have the Incident Category combobox to be empty when the form is open _
I have tried Cmbox_IncCategory.Value = "", but I get an error. I then tried Cmbox_IncCategory.text = "" _
but also get the error. I don't know how else to get it to work .. I tried both codes in the _
form_initialize, but get an error ... I'm stumped !
Select Case Me.cmbx_Category_Type
Case "Crime"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_CRIME"
Case "Property Damage - Minor - NS"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_PROPRTY_NS"
Case "Property Damage - Significant - S"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_Proprty_S"
Case "Safety"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SAFETY"
Case "Security Breach"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_BREACH_S"
Case "Support"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SUPPORT"
Case "Vehicle"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_VEHICLE_S"
End Select
End Sub
I appreciate your patience :) I am growing in knowledge, but its a slow process. Please let me know if there is anything else I can help clarify for you :)
This links to
My Sample form
Thanking you again
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Error message: Item doesn't have proper security settings

I just installed protools on my new mac bookand now i get an error message that says "An item in the Startup Items folder (/library/startupitems/PACESupport) does not have the proper security settings. Then it prompts me to disable, fix, or decide later. It may be unrelated but i'm not sure what to do about it.

I'm sure the people who built your system are very qualified, but if they told you they installed "Reader Professional" which doesn't exist, I'd have to question those qualifications at least a little. The message you're seeing I've only seen twice before; once with a little used mail client, and the other time with an improperly configured IMAP server setting in Outlook.
http://www.adobe.com/support/programs/acrobat/
You'll find support for Acrobat Pro there, but it will not be free.
OR..
we can look into it here, but we need to know what email client you're using, whether you use a dedicated (IMAP or POP) mail server or HTML (like G-mail, Yahoo Mail or Hotmail), and since help in the forums is free, it most likely won't be as fast as the paid support options.

How to display exception on error page raised from custom login module?

Hi All,
I've created my own login module and I am using form authentication mechanism.
Here is how my login and error pages defined in web.xml:
    <login-config>
      <auth-method>FORM</auth-method>
      <form-login-config>
        <form-login-page>/logon.jsp</form-login-page>
        <form-error-page>/error.jsp</form-error-page>
      </form-login-config>
    </login-config>
But when my login module throws an exception (LoginException) the following code in <i>error.jsp</i> returns null:
<%=request.getAttribute("javax.servlet.error.message")%>
though this code works good on Weblogic.
Declaring the <i>error.jsp</i> also in the <error-page> tag didn't help.
So what did I miss to configure?
Or maybe NetWeaver doesn't allow to get the exception from the <form-error-page> at all?

If I understand your question correctly, you can use the CQ.Notification JavaScript object for this. See documentation here: http://dev.day.com/docs/en/cq/current/widgets-api/index.html?class=CQ.Notification

Page Items from parent related table (readonly - only display)

Hi,
is this possible in APEX 5.0?
DB Strucktur: Customer (Fields: Name, Address, Postal Code ...) 1:n Contacts (Firstname, Lastname, customer_id, ...)
I need a Form (Contact):
Firstname:
Lastname:
Address:
Readonly Items from Customer Table (only display):
Customer Name:
Cistomer Address Items:
Thanks for help!
Alex

Here's what you could do:
- First create a Report with Form on your Contact Table
- Next create a new region called customer info
- Drag the different display only items for the columns in the Customer table into the new region
- Finally create a Process Before header which does
     select cust_name, cust_address
       into :P1_CUST_NAME, :P1_CUST_ADDRESS
      from customer_table
   where id = :P1_CUSTOMER_ID;
- Put a condition on the process to only fire when you have a :P1_CUSTOMER_ID
Note: your table, columns might be a bit different than in the above example.
Hope that helps,
Dimitri
-- https://www.apexrnd.be
-- http://dgielis.blogspot.com

Error when writing reviews: "in order to write a customer review for this item you must have purchased or downloaded it first"

I constantly get the error "in order to write a customer review for this item you must have purchased or downloaded it first" when I'm trying to write reviews on my iPhone. Sometimes I can access iTunes via my PC and write the review on there from the App Store page, but sometimes even that doesn't work. Even though, at the top of the app's page, it says "downloaded" under the graphic. I am properly logged into iTunes, using the same email address and password I used to purchase the app. I don't understand why this is happening, it doesn't make sense. It started after I updated to iOS5, but I can't find any mention of other people having this problem. Anyone know anything?

You CAN'T review applications "purchased" using a promo code. Not saying you used a promo code, but if you did, you won't be able to leave a review. If you didn't use a promo code, delete the app in question from your iTunes library, then re-download it. See if you can leave a review now.

Clearing of open items from one Bank Account to one or several customer A/C

The requirement herein is to do the Posting & clearing of open items from one Bank Account to one or several customer Accounts. We will have to use the Standard program RFBIBL00 to achieve this because the program can do the posting and clearing of open items. I know that we will have to use the structures BSELK (Header) & BSELP (item) to get the clearing functionality as well. Now the question is to which field we will map the Bank A/C No. and the Customer Clearing A/C. I need help on mapping the data to correct structure fields. I thought about it and I think the data should be arranged like the following:
BGR00- Session Header
BBKPF- Header
BBSEG- Doc. data (Bank Account BBSEG-BANKN )----Can you confirm ??
BSELK-AGKON (Customer A/C- open item/ Header )
BSELP - Line Item
BSELK-AGKON (Customer A/C- open item/ Header )
BSELP - Line Item
BSELK-AGKON (Customer A/C- open item/ Header )
BSELP - Line Item
I know that the clearing can happen from one Bank A/C to several customer accounts. I am thinking on building up data in this format & then writing it to a file to sumbit the file data to RFBIBL00. Can anybody help me in building up the data. Kindly provide your helpful insights. I want to be sure if this is correct or not ?? One more question how to fill the BSELP structure ??

Solved Through forum

Hi - I keep receiving the following error message on a song I purchased from itunes and am now trying to drag and drop to my iPad: "you must download items from icloud before you can copy then to iPad" what does this mean - please help! Thank you

Hi - I keep receiving the following error message on a song I purchased from itunes and am now trying to drag and drop to my iPad: "you must download items from icloud before you can copy then to iPad" what does this mean - please help! Thank you

Hi Poonam26c,
If you do not have a local copy of a song which you have purchased (i.e. it is available via iTunes in the Cloud), you may need to redownload it before you can transfer it to your device. You may find the following article helpful:
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Regards,
- Brenden

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get to the chat. Please advise!!!!

MoeGhazal I reviewed your account and it looks like you have have upgraded from a CS4 volume license for Design Premium to a retail upgrade of Design Premium 5.5.
I also show that you made two purchases of CS5.5 Design Premium but the second purchase was canceled. Please make sure you are utilizing the serial number which ends in 7886.
If you are using the correct serial number then it is likely the installer will not recognize your volume license CS4 serial number as being valid for an upgrade. If you can contact our support team then you can be walked through an unlocking procedure to allow you to proceed with the installation. You can contact our support team directly at Contact Customer Care. You may want to try installing a web browser you have not previously utilized. It is likely a toolbar or some other software application is affecting your ability to access chat support successfully.
If you are still unable to reach our support team then please verify the information under your account is accurate. If you can please then update this discussion after confirming this then I can request a member of our support team contact you directly.
Again I would recommend reaching out directly if possible as it will be the most efficient method of resolving your current error.

I have a table with info and would like to select an item from that table

Hi
I have a table with info (course info that I searched for) and would like to select an item from that table to use for further use in my application.
It must work more or less like the tree structure where I can use an On Action select.
In other words; let say I am looking for all courses with "Advisor" it its descriptin / name, I want to click on one of the names and use it lets say to book people on.
Could some please assist me with this.
Regards
Debbie

Hi
The datasource for my table is the node searchcatalog. Under this node there is an attribute calles description where the items found are displayed.
I changed my code as follow:
data: ls_table type wd_This->Elements_searchcatalog,
      lr_element type ref to if_wd_context_element.
DATA lo_nd_searchcatalog TYPE REF TO if_wd_context_node.
DATA lo_el_searchcatalog TYPE REF TO if_wd_context_element.
DATA ls_searchcatalog TYPE wd_this->element_searchcatalog.
navigate from <CONTEXT> to <SEARCHCATALOG> via lead selection
lo_nd_searchcatalog = wd_context->get_child_node( name = wd_this->wdctx_searchcatalog ).
@TODO handle not set lead selection
IF lo_nd_searchcatalog IS INITIAL.
ENDIF.
get element via lead selection
lo_el_searchcatalog = lo_nd_searchcatalog->get_element( ).
@TODO handle not set lead selection
IF lo_el_searchcatalog IS INITIAL.
ENDIF.
get all declared attributes
lo_el_searchcatalog->get_static_attributes(
    IMPORTING
      static_attributes = ls_searchcatalog ).
lo_nd_searchcatalog->get_lead_selection->( exporting index = wdevent->index importing
element = lr_element ).
lr_element->get_static_attributes->( importing static_attributes = ls_table ).
wd_context->set_attribute( exporting name = 'SELECTED' value = ls_table-description ).
When I try to activate it errors with: List elements that take up more than one line is not allowed. This error at the sentence: lo_el_searchcatalog->get_static_attributes(
If you cannot assist me further I will understand. Thank you.

Error Dummy items from Customizing have to be excluded @ Liquidity Planner

Similar Messages

Maybe you are looking for