Error Dump Creating a Transformation Object

Hi all:
I have NW2004s  in my box.
I have the following error when trying to create a Tranformation Object (function "Create Transformation"  on a Data Source).:
"Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx are installed on your computer....".
Installation went ok, with no errors, so I don't know why the system is asking for additional files.
If so, what should I do?...What should I check?
Thanks in advance.

You don't have access to :
http://service.sap.com/notes
or SAP Notes through CSS ?
Then, it will be difficult as some notes have corrections that need to be implemented and you do need the access.
Best Regards,
Snehal

Similar Messages

  • Error while creating Vacancy requisition object (NB) after upgrading EHP4

    Hi All,
    We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
    Can any body help how to resolve this issue?
    Thanks in advance.
    Regards,
    Sreelatha

    Hi
    Hope SAP Note 1241014 will be useful to you.
    Best Regards
    Reddy

  • Error when creating a Transformation

    Hi BI pros,
    I want to create a transformation between an InfoObject (ZVO_MAT) and DataSource (Z_VO_MAT_ATTR).
    So, II tried to create the transformation by the following below:-
    > Right clicking the DataSource (Z_VO_MAT_ATTR)
    > select Create Transformation
    > a 'Create Transformation - Pop-up window'
    In the 'Create Transformation Pop-up window', below are what I select and entered::-
    Target of the Transformation
    Object Type: InfoObject
    Subtype of Object: Attribute
    Name: ZVO_MAT
    Source of the Transformation
    Object Type: DataSource
    DataSource: Z_VO_MAT_ATTR
    Source System: ER1CLNT100
    However, when I click on the 'green tick', it display error message: InfoObject ZVO_MAT not assigned to an InfoArea
    I have checked InfoObject: ZVO_MAT and I am sure it's under an InfoArea (Z_VI_IA).
    I don't know what is the reason for the error message to display.
    Please help.
    Many Thanks,
    Vince
    I found out how to fix it, thanks anyway!
    Edited by: Vincent Ong on Jun 10, 2010 9:35 AM

    Hi,
    Open the info object and check if you have marked "Characteristic is info provider" and assign the info provider below it .
    Save and activate it and try.It should work.
    - Jaimin

  • Error in Creating Time series objects in APO 5.0

    Hi, We are implementing APO 5.0.  I am trying to Create Time series objects for Planning Area 9ASNP05, but getting the following Run Time Error
    We have used Support Package 10
    Runtime Errors         PERFORM_TOO_MANY_PARAMETERS
    Exception              CX_SY_DYN_CALL_PARAM_NOT_FOUND
    The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
    not caught in procedure "RSS_TEMPLATE_INSTANTIATE" "(FUNCTION)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is: A PERFORM was used to call the routine "INSTANTIATE" of the program
      "GP_MET_RSSG_HEADER_COMMENT".
    This routine contains 15 formal parameters, but the current call
    contains 16 actual parameters.
    Any

    Hi
    I am getting exactly the same error, on SCM 5.0 SR2, running on Windows 2003 64 BIT & SQL 2000.
    Conditions for error:
    Using transaction:
    /SAPAPO/MSDP_ADMIN
    Select: Planning Object Structures
    Short Dump occurs if you either:
    1. Attempt to deactivate an active Planning Object Structure
    2. Attempt to create a Characteristic Combination
    Gives a runtime error shortdump PERFORM_TOO_MANY_PARAMETERS
    Error analysis:
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was
         not caught in
        procedure "RSS_TEMPLATE_INSTANTIATE" "(FUNCTION)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        A PERFORM was used to call the routine "INSTANTIATE" of the program
         "GP_MET_RSSG_HEADER_COMMENT".
        This routine contains 15 formal parameters, but the current call
        contains 16 actual parameters.
    Has anyone seen this before?
    Did you find a solution Bhavesh ?
    Thanks.

  • Error while creating a callable object - User Interface

    Hello,
    When i'm trying to create a callable object - User Interface in the guided procedure design time. i'm getting an error. An internal server error. This is happening while i'm trying to create a guided procedure with webdynpro's.
    Is there any body who allready had somthing like this.
    Greetings
    Kurt

    Hi Raja Akella,
    I allready had the roles and my portal version is upgraded until SP8 and all the possible patches.
    I get an internal server error when i want to create a callable object. specially when i want to create a webdynpro ( ABAP / JAVA).
    In the visual administrator i get the following  errors.
    <b>Error 1</b>
    Exception occured during processing of a Web Dynpro application: "com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.".
    [EXCEPTION]
    com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
         at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:640)
         at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponentInternal(IWDApplicationInfo.java:286)
         at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponent(IWDApplicationInfo.java:270)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.addWdappsElement(COConfigWDApp.java:646)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readWebDynproApps(COConfigWDApp.java:631)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readApplications(COConfigWDApp.java:308)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalCOConfigWDApp.readApplications(InternalCOConfigWDApp.java:190)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.initCreate(VSelect.java:306)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.onPlugFromDispatch(VSelect.java:174)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalVSelect.wdInvokeEventHandler(InternalVSelect.java:168)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)
         at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:178)
         at com.sap.tc.webdynpro.repository.persistence.xml.XMLPersistence.doReadVMO(XMLPersistence.java:126)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.readVMO(RepositoryPersistence.java:356)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.doFindRepositoryObject(RepositoryPersistence.java:598)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.findRepositoryObject(RepositoryPersistence.java:170)
         at com.sap.tc.webdynpro.repository.model.Repository.findRepositoryObjectInternal(Repository.java:590)
         at com.sap.tc.webdynpro.repository.model.RepositoryObjectRelation$XMLGuidWrapper.getModelObject(RepositoryObjectRelation.java:462)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.getCurrentLayerObject(RepositoryPersistence.java:702)
         at com.sap.tc.webdynpro.repository.model.Repository.getCurrentLayerObject(Repository.java:1483)
         at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.doMergeInheritedTarget(NonSharedRelationToOne.java:85)
         at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.mergeInheritedTargets(NonSharedRelationToOne.java:49)
         at com.sap.tc.webdynpro.repository.model.RelationToOne.getTarget(RelationToOne.java:93)
         at com.sap.tc.webdynpro.repository.model.AbstractRepositoryModelClass.getRelatedModelObject(AbstractRepositoryModelClass.java:234)
         at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:636)
         ... 39 more
    Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)(:main:, row=1, col=491) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
         at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:148)
         at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:166)
         ... 52 more
    Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
         at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1566)
         at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1687)
         at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2792)
         at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259)
         at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:278)
         at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:340)
         at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
         ... 53 more
    <b>error 2</b>
    Processing HTTP request to servlet [dispatcher] finished with error. The error is: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
         at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:640)
         at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponentInternal(IWDApplicationInfo.java:286)
         at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getComponent(IWDApplicationInfo.java:270)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.addWdappsElement(COConfigWDApp.java:646)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readWebDynproApps(COConfigWDApp.java:631)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.COConfigWDApp.readApplications(COConfigWDApp.java:308)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalCOConfigWDApp.readApplications(InternalCOConfigWDApp.java:190)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.initCreate(VSelect.java:306)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.VSelect.onPlugFromDispatch(VSelect.java:174)
         at com.sap.caf.eu.gp.ui.co.config.wdapp.wdp.InternalVSelect.wdInvokeEventHandler(InternalVSelect.java:168)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)
         at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:178)
         at com.sap.tc.webdynpro.repository.persistence.xml.XMLPersistence.doReadVMO(XMLPersistence.java:126)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.readVMO(RepositoryPersistence.java:356)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.doFindRepositoryObject(RepositoryPersistence.java:598)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.findRepositoryObject(RepositoryPersistence.java:170)
         at com.sap.tc.webdynpro.repository.model.Repository.findRepositoryObjectInternal(Repository.java:590)
         at com.sap.tc.webdynpro.repository.model.RepositoryObjectRelation$XMLGuidWrapper.getModelObject(RepositoryObjectRelation.java:462)
         at com.sap.tc.webdynpro.repository.persistence.RepositoryPersistence.getCurrentLayerObject(RepositoryPersistence.java:702)
         at com.sap.tc.webdynpro.repository.model.Repository.getCurrentLayerObject(Repository.java:1483)
         at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.doMergeInheritedTarget(NonSharedRelationToOne.java:85)
         at com.sap.tc.webdynpro.repository.model.NonSharedRelationToOne.mergeInheritedTargets(NonSharedRelationToOne.java:49)
         at com.sap.tc.webdynpro.repository.model.RelationToOne.getTarget(RelationToOne.java:93)
         at com.sap.tc.webdynpro.repository.model.AbstractRepositoryModelClass.getRelatedModelObject(AbstractRepositoryModelClass.java:234)
         at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.getRelatedModelObject(DelegatorRepositoryModelClass.java:636)
         ... 39 more
    Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:491)(:main:, row=1, col=491) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
         at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:148)
         at com.sap.tc.webdynpro.repository.persistence.xml.XMLConfigurationParserWriter.startParsing(XMLConfigurationParserWriter.java:166)
         ... 52 more
    Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:491)
         at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1566)
         at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1687)
         at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2792)
         at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259)
         at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:278)
         at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:340)
         at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
         ... 53 more
    <b>error 3</b>
    Processing HTTP request to servlet [dispatcher] finished with error.
    The error is: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to get Related Model Object for the object com.sap.caf.eu.gp.dt.comp.semanticbrowser.SemanticBrowserApp, relation Component.
    Exception id: [00505691431B006F0000003E00000FE800041B45B87F7617]
    thanks in advance
    Kurt

  • Error while creating a system object for R3 in portal

    Hi,
    I am getting error while trying to create a system object in portal.
    Following are the details I used :
    Under WAS...
    Web AS Host Name :<XXXX>:8001
    Web AS path: /sap/bc/bsp/sap/
    Web AS protocol : http
    Under User management:
    Authentication Ticket Type : SAP Logon Ticket
    Logon Method :SAPLOGONTICKET
    User Mapping Type : admin,user
    Under Connector:
    SAP Client : <Client NO>
    SAP System ID : <System ID>
    SAP System No : <System No>
    System Type : SAP_R3
    While trying with connection test... I am getting like this:
    SAP Web AS Connection
      Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Checks if the host name of the server can be resolved.
    6. Pings the server to see if it is alive.
    7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
    8. Checks HTTP/S connectivity to the defined back-end application
      Results
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
    5. The host name <FQDN Server Name> was resolved successfully.
    6. The server sapdwh01 could not be pinged successfully.
    Test Connection with Connector
      Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
    Kindly help.
    Regards,
    Niraj
    Edited by: Niraj Kumar on Dec 11, 2008 10:41 AM

    I created a SAP Transactional iView for transaction SE80.
    Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
    Got portal Runtime error :
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 12:57_11/12/08_0003_2795650
    See the details for the exception ID in the log file.
    Regards,
    Niraj

  • Error while creating new entity object.

    Hi all
    I'm using Jdev 11.1.1.3. I want to create an entity object and Jdev issues an information error saying "Either this is not a valid name or an object with that name already exists."
    I found that if the package I'm targeting for the new entity is called "com.test.model.whatever" I cannot create a EO called "Whatever".
    I can't find any reference in the fusion developer guide that constraints the entity names to be allowed.
    Is there a way to circumvent this issue or is this the way it should be?

    Sudipto and Suresh, thank you very much for your replies.
    I know that changing the package or entity name would work, but was expecting some other kind of workaround, something like giving a full qualified name on some xml or something to avoid the name clash or whatever the problem is.
    I do not like packing all the entities together as it goes against my best practice of packing things that change together on the same package. Also I don't like suffix or prefix class names as it goes against my best practice of short descriptive names.
    So well, I will have to tinker the names some more and meet you guys half way.
    I will now mark this thread as answered, thanks again.

  • Error while creating the proxy object to connect to a third party tool.

    Hi,
    I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
    "Proxy-Generierung: Fehler aufgetreten"
    "Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
    Thanks & Regards,
    Veerabhadra Rao A.

    do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
    Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

  • Error when creating a Proxy Object from WSDL

    Hi,
    when creating a proxy object in abap based on the [WSDL|http://download.mapandguide.com/EN/dev/xserver/XLocate-1.6.0.3.wsdl] i get the error 'Incorrect value: Unknown Type Referencens0:ArrayOfString'.
    1- Is there a conflict with the type 'String' that's also a type in ABAP
    <complexType name="ArrayOfString">
      <sequence>
      <element name="String" type="xsd:string" minOccurs="0" maxOccurs="unbounded" nillable="true" />
      </sequence>
      </complexType>
    2- Is it a name space problem?
    xmlns:ns0="http://types.xlocate.xserver.ptvag.com"
    type="ns0:ArrayOfString"
    3- Something else?
    Please Help!
    Thank
    Fouad

    Hi Isaias,
    we are working with this versions:
    SAP_BASIS     700     0015     SAPKB70015     SAP Basiskomponente
    SAP_AP                     700     0013     SAPKNA7013     SAP Application Platform
    We are not working with developer studio, only with the regular tools of the abap development workbench Transaction SE80.
    Thanks,
    Fouad

  • Error when creating a ReportDocument object in ver 11.5.3300.0

    When I try to create a new ReportDocument from .NET the application exists with no other information. There is an event log entry similar to this one:
    Faulting application CrystalTest1.vshost.exe, version 9.0.21022.8, time stamp 0x47316898, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x04525da0, process id 0x10fc, application start time 0x01c9c2d6d624913d.
    Investigating more I tracked down that the error happens when I try to create various COM objects from Crystal Reports (for example by running the following vbscript: Set o = CreateObject("CrystalClientDoc.ReportClientDocument")). The error is always an Access Violation in cachemanager.dll on address 3f8691b5:
    3F869172 push ebx
    3F869173 push esi
    3F869174 push edi
    3F869175 push 3F873464h
    3F86917A call dword ptr ds:3F86C04Ch
    3F869180 mov ebx,dword ptr esp+10h
    3F869184 mov esi,eax
    3F869186 mov eax,dword ptr esi
    3F869188 mov ecx,esi
    3F86918A mov dword ptr esi+4,ebx
    3F86918D call dword ptr eax+8
    3F869190 push esi
    3F869191 lea edi,esi+14h
    3F869194 push eax
    3F869195 mov ecx,edi
    3F869197 call 3F8690EE
    3F86919C mov edi,dword ptr edi
    3F86919E push edi
    3F86919F push 0FFFFFFFCh
    3F8691A1 push ebx
    3F8691A2 call dword ptr ds:3F86C254h
    3F8691A8 push dword ptr esp+1Ch
    3F8691AC push dword ptr esp+1Ch
    3F8691B0 push dword ptr esp+1Ch
    3F8691B4 push ebx
    3F8691B5 call edi
    3F8691B7 pop edi
    3F8691B8 pop esi
    3F8691B9 pop ebx
    3F8691BA ret 10h
    The full stack trace is:
    00455B60()
    cachemanager.dll!3f8691b7()
    http://Frames below may be incorrect and/or missing, no symbols loaded for cachemanager.dll
    user32.dll!7735f8d2()
    user32.dll!7735f794()
    user32.dll!7735f73d()
    user32.dll!77360817()
    user32.dll!773539f7()
    ntdll.dll!771f99ce()
    user32.dll!77353cf7()
    user32.dll!77353b94()
    user32.dll!77353cc3()
    atl71.dll!7c12c51d()
    atl71.dll!7c12c633()
    atl71.dll!7c121653()
    user32.dll!77353d9a()
    cachemanager.dll!3f86922f()
    cachemanager.dll!3f86949e()
    cachemanager.dll!3f869600()
    cachemanager.dll!3f868aec()
    msvcr71.dll!7c349565()
    kernel32.dll!760e4911()
    ntdll.dll!771de4b6()
    ntdll.dll!771de489()
    The address called at 3f8691b5 seem to always contain the following data in my case:
    00455B51 00 00 add byte ptr eax,al
    00455B53 00 00 add byte ptr eax,al
    00455B55 00 00 add byte ptr eax,al
    00455B57 00 DA add dl,bl
    00455B59 44 inc esp
    00455B5A 44 inc esp
    00455B5B 3A 00 cmp al,byte ptr eax
    00455B5D 00 00 add byte ptr eax,al
    00455B5F 8B db 8bh
    00455B60 C7 44 24 04 70 1F F4 01 mov dword ptr esp+4,1F41F70h
    00455B68 E9 4E 39 41 3F jmp 3F8694BB
    00455B6D 00 00 add byte ptr eax,al
    00455B6F 00 DF add bh,bl
    00455B71 44 inc esp
    00455B72 44 inc esp
    00455B73 3A 00 cmp al,byte ptr eax
    00455B75 00 00 add byte ptr eax,al
    00455B77 88 E0 mov al,ah
    00455B79 66 45 inc bp
    00455B7B 00 90 5B 45 00 B8 add byte ptr eax-47FFBAA5h,dl
    The data and the address seem to be always the same in my case.
    I am running 32-bit Vista Ultimate on a dual core Intel Centrino CPU. I have a Crystal Reports Deployment suite installed. The cachemanager.dll is 106,496 bytes and the file version is 11.5.8.998
    Pelase help!

    Hi Ludek,
    Thanks for looking into this.
    > What version of .NET are you using?
    I have all version of .NET installed but please note that .NET is not required to reproduce the problem. Please read again my initial post. The error can be reproduced with this single line of VB Script and there is no .NET involved:
    Set o = CreateObject("CrystalClientDoc.ReportClientDocument")
    The same can be reproduced by creating a new ReportDocument object from .NET in any type of .NET application.
    > What CR Service Pack are you on?
    I haven't installed any additional service packs. Please see the versions of the files I have on my system to figure out the service pack:
    Crystaldecisions.Crystalreports.Engine.dll file version = 11.5.9708.998
    cachemanager.dll file version = 11.5.8.998
    clientdoc.dll file version = 11.5.8.998
    The other computers where all works good have the same versions installed.
    > What .NET Service Pack are you on?
    All latest service packs and updates from Microsoft are installed
    > What is the version of the CR assembly crystaldecisions.Crystalreports.engine.dll referenced in your application?
    The assembly version is 11.5.3700.0, file version: 11.5.9708.998, file size: 393,216 bytes
    > Is this a web or a win app?
    The error happens in btoh web and windows forms applications as well as by simply trying to create the Crystal COM object directly from VB Script without involving any .NET. So the same error will occur if CR are used from VB6 for example.
    > What OS are you on?
    Again as per my original post I am using a 32-bit Vista Ultimate on a dual core Intel Centrino CPU
    > What happens if you try to run an existing application?
    I get a crash in unmanaged code in cachemanager.dll at 0x3f8691b7. All the details are in my original post (scroll up). When this happens in a .NET application, the process is terminated and Vista shows a message that the program has stoped working. There is an error in the event log (see my original post)
    > There are different ways of instantiating a report. The sample app vbnet_win_simplepreview has all of these. Running the app with the different options may give us a clue... Was Crystal Reports installed before .NET or after?
    Crystal Reports Basic for Visual Studio 2008 was installed with VS 2008. After that I installed Crystal Reports Server Deployment
    > Have you tried to reinstall Crystal Reports?
    Yes I did reinstall both Crystal Reports Basic for Visual Studio 2008 and Crystal Reports Server Deployment in reverse order (i.e. the server deployment first and then the basics)

  • Error building/creating WD Callable Object

    Hello guys,
    Pardon for reposting - I did post on the WD Java thread - and I think this is the more appropriate area to ask this question since its GP Callable Objects related.
    While creating a WD Callable Object: I
    I added Used DC: caf/eu/gp/api/wd to the WD DC. And added IGPWebdynproCO on the Implemented Interface. Afterwards, after building the DC, I got the following errors:
    This compilation unit indirectly references the missing type com.sap.caf.eu.gp.co.api.IGPTechnicalDescription (typically some required class file is referencing a type outside the classpath)
    The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.caf.eu.gp.co.api.IGPTechnicalDescription. Fix the classpath then try rebuilding this project.
    I tried repair and rebuild - and restared NWDS (and even restarted my PC).
    Issue not resolved.
    What else should I do?
    Thanks!
    Regards,
    Jan

    I solve this including DC from caf/eu/gp/api (external public part) as show
    http://help.sap.com/saphelp_nw70/helpdata/en/43/e085d6421a4d9de10000000a155369/content.htm
    Later the method getDescription throws error because not return anything, while I return null
    Regards,

  • Error while creating Logical Data Object Model

    Can anyone from Informatica help me on this ?

    Hello Everyone ,  I am creating new objects in Informatica BDE 9.6.1 . While  I trying to create a new Logical Data Object Model using the Customer_Order.xsd file  I am getting the error :  [MBCM_E0031 ]MIMB HOME directory is not valid .  I do not see anything in the drop-down list for Model Type .Kindly help .  RegardsSatyendra

  • Error while creating the Ole Object (MSN Messenger)

    Hi,
    We are trying to send a mail by invoking MSN Messenger. We have imported "Messenger.MsgrObject" OLE Object and written the following code to logon to the Messenger.
    DECLARE
         MSGOBJ123 OLEOBJ;
         SRVOBJ123 OLEOBJ;
         SRVOBJ1234 OLEOBJ;
    BEGIN
         MSGOBJ123 := CREATE_OLEOBJ('Messenger.MsgrObject');
    -- Get all the services from the Messenger Object
         SRVOBJ123 := Messenger_IMsgrObject.Services(MSGOBJ123);
    -- Get one of the services
         SRVOBJ1234 := Messenger_IMsgrServices.Item(SRVOBJ123, 0);
         IF :TXTUSR = NULL THEN
         MESSAGE('User Name cannot be null');
         RAISE FORM_TRIGGER_FAILURE;
         ELSIF :TXTPWD = NULL THEN
         MESSAGE('Password cannot be null');
         RAISE FORM_TRIGGER_FAILURE;
         ELSE
    -- Log on to the Messenger By passing the MsgObject,
    -- User Name, password, Service Object
         Messenger_IMsgrObject.LogOn(MSGOBJ123, :LOGINBLK.TXTUSR, :LOGINBLK.TXTPWD, SRVOBJ1234);
         END IF;
    END;
    We get this error while executing this program
    "FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-100504"
    Please advice whether there is way to solve this problem or any other method of accessing MSN Messenger.
    Thanks
    Vishwanath

    do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
    Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

  • Error when creating inner instance object...

    public class Outer{
              class Inner{}
              public static void main(String[] s){
               Outer o = new Outer();
               Outer.Inner i = o.new Outer.Inner();
               /*above is what my tutorial has taught me, but when a compile time         error?*/
    }Can any spot the error of the above??

    I'd say the error is in trying to do that in the first place.
    What's the exact error you get when you try to compile?
    As a guess, I'd say that Outer.inner isn't valid because Inner isn't static, just like Outer.foo() wouldn't be valid if you had a non-static method foo(). Just like you'd need to do o.foo(), you probably need to do o.inner.
    Have I just done your homework for you?

  • Error while creating MV replication group object

    Hi,
    I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
    OEM error
    This error while creating M.V. rep. group object
    There is a table or view named SCOTT.EMP.
    It must be dropped before a materialized view can be created.
    In SQLPLUS
    SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
    Connected.
    SQL>
    SQL> BEGIN
    2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
    3 gname => 'SCOTT',
    4 sname => 'KARTHIK',
    5 oname => 'emp_mv',
    6 type => 'SNAPSHOT',
    7 min_communication => TRUE);
    8 END;
    9 /
    BEGIN
    ERROR at line 1:
    ORA-23306: schema KARTHIK does not exist
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
    ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
    ORA-06512: at "SYS.DBMS_REPCAT", line 1332
    ORA-06512: at line 2
    Please not already I have created KARTHIK schema.

    Arthik,
    I think I know what may have happened.
    As I can see you are trying to create support for an updateable materialized view.
    You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
    From the code you have shown, I bet the owner of table EMP is SCOTT.
    From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
    According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
    Please check the documentation at the link below
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
    I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
    I'll skip some of the steps that I used to create the replication environment.
    I have two databases, DB1.world and DB2.world
    On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
    SQL> conn scott/*****@DB2.world
    Connected.
    SQL>create materialized view log on EMP with primary key;
    Materialized view log created.
    SQL>
    SQL>conn repadmin/*****@DB2.world
    Connected.
    SQL>BEGIN
      2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
      3         gname => 'GROUPA',
      4         qualifier => '',
      5         group_comment => '');
      6*   END;
    PL/SQL procedure successfully completed.
    SQL>BEGIN
      2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
      3         gname => 'GROUPA',
      4         type => 'TABLE',
      5         oname => 'EMP',
      6         sname => 'SCOTT',
      7         copy_rows => TRUE,
      8         use_existing_object => TRUE);
      9*   END;
    10  /
    PL/SQL procedure successfully completed.
    SQL> BEGIN
      2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
      3         sname => 'SCOTT',
      4         oname => 'EMP',
      5         type => 'TABLE',
      6         min_communication => TRUE);
      7    END;
      8  /
    PL/SQL procedure successfully completed.
    SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
    PL/SQL procedure successfully completed.
    SQL> select status from dba_repgroup;
    STATUS                                                                         
    NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
    SQL>conn mviewadmin/****@DB1.world
    Connected.
    SQL>   BEGIN
      2       DBMS_REFRESH.MAKE(
      3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
      4         list => '',
      5         next_date => SYSDATE,
      6         interval => '/*1:Hr*/ sysdate + 1/24',
      7         push_deferred_rpc => TRUE,
      8         refresh_after_errors => TRUE,
      9         parallelism => 1);
    10    END;
    11  /
    PL/SQL procedure successfully completed.
    SQL>   BEGIN
      3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
      5         gname => 'GROUPA',
      7         master => 'DB2.wolrd',
      9         propagation_mode => 'ASYNCHRONOUS');
    11    END;
    12  /
    PL/SQL procedure successfully completed.
    SQL>conn myuser/*****@DB1.world
    Connected.
    SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
      2    REFRESH FAST
      3    FOR UPDATE
      4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
      5*      FROM   [email protected];
    Materialized view created.
    SQL>conn mviewadmin/******@DB1.world
    Connected.
    SQL> BEGIN
      2       DBMS_REFRESH.ADD(
      3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
      4         list => 'MYUSER.EMP_MV',
      5         lax => TRUE);
      6    END;
      7  /
    PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
    SQL>   BEGIN
      2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
      3         gname => 'GROUPA',
      4         sname => 'MYUSER',
      5         oname => 'EMP_MV',
      6         type => 'SNAPSHOT',
      7         min_communication => TRUE);
      8    END;
      9  /
      BEGIN
    ERROR at line 1:
    ORA-23306: schema MYUSER does not exist
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
    ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
    ORA-06512: at "SYS.DBMS_REPCAT", line 1332
    ORA-06512: at line 3 I reproduced exactly the same error message.
    So the problem is clearly in the schema name that owns the materialized view.
    Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
    SQL>conn scott/****@DB1.world
    Connected.
    SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
      2    REFRESH FAST
      3    FOR UPDATE
      4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
      5*      FROM   [email protected];
    Materialized view created.
    SQL>conn mviewadmin/******@DB1.world
    Connected.
    SQL> BEGIN
      2       DBMS_REFRESH.ADD(
      3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
      4         list => 'SCOTT.EMP_MV',
      5         lax => TRUE);
      6    END;
      7  /
    PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
    SQL>   BEGIN
      2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
      3         gname => 'GROUPA',
      4         sname => 'SCOTT',
      5         oname => 'EMP_MV',
      6         type => 'SNAPSHOT',
      7         min_communication => TRUE);
      8    END;
    PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
    -- Mihajlo
    Message was edited by:
    tekicora

Maybe you are looking for

  • Vision M 30GB no longer working or even turning

    I have a Vision M 30GB. It was purchased just short of 2 years ago. I understand the warranty has lapsed but it is no longer even turning on. It froze whilst playing a track, when I reset it it froze whilst Re-Building and then shut off completely an

  • Difference between Business Partner (General) and Contract Partner

    Hi, How is a business partner different from a contract partner with respect to IS-U? Thanks C

  • IPhone 4s and iPhoto question

    I downloaded iPhoto to my iPhone 4S and it automatically downloaded all of my photos through the Cloud to my phone.  I think all of my photos are duplicated between iPhoto and the Photo default app that came with the phone.  What is the advantage of

  • Portal Runtime Error: 0 = 0.

    I am developing a TableView when I run the application I get a Portal Runtime Error 0>0. The Stack is as follows: at java.util.Vector.elementAt(Vector.java:431)      at com.sapportals.htmlb.table.DefaultTableViewModel.getValueAt(DefaultTableViewModel

  • Contact Adobe Presenter 7 developers

    hay friends, I have a question: how do I make a contact with the adobe presenter 7 developers for improving this software and to give them suggestions and bug reports? Thanks, rami