Error: duplicate element "AddressOnParent"

Hi,
I'm trying to open an ANM OVA file: "anm-va-5.2.2.ova" on a ESXi server version 5.1 with vCenter 5.1.
I'm getting the following Error -" line 79:duplicate element 'AdderssOnParent' ".
Can someone help figure out how can i open this OVA file?
I attached the Error message i get.
thanks.

I ran into this problem, too.
Jonatan, the only issue with running this on ESXi 5.1 that I've found is that the .ova contains some incorrect language for the newer release (disk definitions are incorrect).
If you extract the .vmdk from the .ova file and build a new machine with the correct ram, CPU etc and choose to 'use existing vmdk' when setting up the appliance, you should find that it boots right up and starts working
I've got that running in my environment quite happily.

Similar Messages

Wscompile error : duplicate

environment: JAX-RPC Standard Implementation (1.1.2_01, build R40)
Server: Sun Application Server 8.0
Problem Statement:
We have two schemas suppose abc.xsd and cde.xsd which refer to one another i.e. abc.xsd imports cde.xsd and vice-versa (circular referencing).
There is a WSDL that imports in the type definition another schema say A.xsd which in turn imports abc.xsd. config-wsdl.xml refers to this WSDL.
On running the following command to generate server side artifacts:
wscompile -gen:server -d build -classpath build -mapping mapping.xml config-wsdl.xml
we get the following error:
error: modeler error: duplicate "element" entity
Is there any mechanism (like setting a flag/using some option )by which wscompile should include definitions of the schemas only once or some other solution to overcome this duplicate element entity error. Since there is no control over xsd's, we cannot modify the schema.
Thanks in advance
Regards
anjali

Hi,
I have a duplicate error of another reason. I try to generate client stubs on a WSDL which has many identical type names but in different namespaces.
- Is there any way to tell wscompile to map the different namspaces automatically to different packagenames?
There will be more and more such webservices with identical types in different namespaces in it. I have to use them and I wan't have the possibility to write for each single webservice explicit namspace / packagename mappings in the config files.
- Does somebody know a solution?

Handling duplicate element names

Hi,
I have been stuck with duplicate element name in my XML. Below is the skeleton of it...
<Admin>
<Information>
<Company>
<CompanyName>Apple</CompanyName>
<CompanyCode>APP</CompanyCode>
</Company>
<TNumber>1-1-123456</TNumber>
<RefrenceNumber>DA1101</RefrenceNumber>
</Information>
<Lists>
<ListItem>
<PolicyNumber>A100</PolicyNumber>
<ListType OWNER="true" HOLDER="true">
<CoverageValue>100</CoverageValue>
</ListItem>
<ListItem>
<PolicyNumber>A200</PolicyNumber>
<ListType OWNER="false" HOLDER="false">
<CoverageValue>200</CoverageValue>
</ListItem>
<ListItem>
<PolicyNumber>A300</PolicyNumber>
<ListType OWNER="true" HOLDER="true">
<CoverageValue>300</CoverageValue>
</ListItem>
</Lists>
</Admin>
The final Output list of Columns I will need are TNumber, ListTypeOwner,ListTypeHolder,CoverageValue
I loaded few XMLs into my XMLType table XML_SAMPLE
Below is the query i use... But every time I try i get no records. I do a sample query without reading the Tnumber I am able to read the values for the 2 XMLs. But when I do a extract for TNumber and the elements inside the ListItem I am not getting back anything.
Below is my query
select m.TNumber,l.ListTypeHolder,l.ListTypeOwner,l.CoverageValue
from XML_SAMPLE,
xmltable(
xmlnamespaces(DEFAULT 'http://www.xxx.com/Pway/Workfile')
'$XS/Admin' passing object_value as "XS"
columns
TNumber VARCHAR2(255) PATH '/Admin/Information/TNumber',
Item_Fragment XMLTYPE PATH 'Lists/ListItem'
) m,
xmltable(
xmlnamespaces(DEFAULT 'http://www.xxx.com/Pway/Workfile')
'$LI/ListItem' passing m.Item_Fragment as "LI"
columns
ListTypeHolder VARCHAR(255) PATH 'ListType/@HOLDER',
ListTypeOwner VARCHAR(255) PATH 'ListType/@OWNER',
CoverageValue VARCHAR(255) PATH 'CoverageValue'
) l
where l.ListTypeOwner="false";
I know its something to do the way the root tag or something. But i have tried out my options Please correct where I am making a mistake

Works for me, after correcting a few sytntax errors and wellformedness issue :
SQL> select m.TNumber,l.ListTypeHolder,l.ListTypeOwner,l.CoverageValue
2 from XML_SAMPLE
3     , xmltable(
4         xmlnamespaces(DEFAULT 'http://www.xxx.com/Pway/Workfile')
5       , '$XS/Admin' passing object_value as "XS"
6         columns
7           TNumber VARCHAR2(255) PATH 'Information/TNumber',
8           Item_Fragment XMLTYPE PATH 'Lists/ListItem'
9       ) m
10     , xmltable(
11         xmlnamespaces(DEFAULT 'http://www.xxx.com/Pway/Workfile')
12       , '$LI/ListItem' passing m.Item_Fragment as "LI"
13         columns
14           ListTypeHolder VARCHAR(255) PATH 'ListType/@HOLDER',
15           ListTypeOwner VARCHAR(255) PATH 'ListType/@OWNER',
16           CoverageValue VARCHAR(255) PATH 'CoverageValue'
17       ) l
18 --where l.ListTypeOwner = 'false'
19 ;
TNUMBER            LISTTYPEHOLDER     LISTTYPEOWNER    COVERAGEVALUE
1-1-123456         true               true             100
1-1-123456         false              false            200
1-1-123456         true               true             300
(tested on 11.2.0.3)

"No Disk" Error (premiere elements 11)

I have successfully installed Adobe Premiere Elements 11 on my PC:
     Dell XPS 8300
     Intel Core i7-2600 Quad Core (3.4 GHz, 8MB Cache)
     • 1GB Radeon HD 6450 Graphics
     • 16GB DDR3 1333 RAM
     • 1TB 7,200RPM Hard Drive (2 x 500GB RAID 0)
     • Windows 7 Home Premium 64-Bit
When I open the application and click "New Project" I get the following error message:
AdobePremiereElements.exe - No Disk
There is no disk in the drive. Please insert a disk into drive
     \Devices\harddisk2\DR3
I can "cancel", "try again", or "continue". The only thing that works is to hit "cancel" (several times). Premiere Elements will then open, but the error message will keep recurring.   Adobe Support (Chat) has not been much help.
Anyone else come across this? This seems to be a common error in earlier versions (version 9), but I can't seem to find any good solution to it.   HELP!!!!
UPDATE:   Just as an FYI..while it's possible (but doubtful) there is preloaded software interfering, there is no other software (or viruses) installed on this computer.
Message was edited by: [email protected]

Boomps, I installed from here and it worked fine:     http://helpx.adobe.com/premiere-elements/kb/installing-smartsound.html There are even step-by-step instructions. Good luck.
Date: Mon, 7 Jan 2013 04:46:21 -0700
From: [email protected]
To: [email protected]
Subject: "No Disk" Error (premiere elements 11)
    Re: "No Disk" Error (premiere elements 11)
    created by BoompsXXX in Premiere Elements - View the full discussion
Not an answer!! I am new to this. I get the same error message and from what I can gather reading the traffic, I have to reinstall Smart sound. Can anyone help a simpleton. I searched the DVD for all files referencing Smart sount, there is plenty. I don't really understand how I reinstall and what??Any help would be great!!ThanksTara
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4973936#4973936
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4973936#4973936
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4973936#4973936. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

RFC Connection error duplicate conversation id

Hello everybody !
I started getting a weird error on my XI RFC Connections, because of this I can't connect to my SLD.
When testing the RFC connection "AI_DIRECTORY_JCOSERVER", Ai_RUNTIME_JCOSERVER, LCRSAPRFC and SAPSLDAPI (trans sm59) I get the following error:
ERROR duplicate conversation id 34212218 from localhost/sapgw01 and calhost/ pgw00
COMPONENT CPIC (TCP/IP) with Unicode
COUNTER 87
MODULE r3cpic.c
LINE 5432
RETURN CODE 736
SUBRC 0
RELEASE 640
TIME Tue Dec 07 12:43:22 2004
VERSION 3
Does anybody have any idea/clues on this? thanx!
Martial

Hello !
I have the same problem you had ...
Do you solve your problem and how ?
Thanks in advance
Martial

HOW TO DELETE DUPLICATE ELEMENT IN A VECTOR

Hi everybody!
If I've a vector like this vectA={apple,orange,grape,apple,apple,banana}
and I want final result be vectB={apple,orange,grape,banana}.
How should I compare each element in vectA and delete duplicate element. Like here duplicated element is apple. Only one apple remain in the vectB.
Any help,
Thanks.

Hello all. Good question and good answers, but I would like to elaborate.
To begin with, you specifically asked to map the following:
{apple,orange,grape,apple,apple,banana} ==> {apple,orange,grape,banana}
Both of cotton.m's solutions do NOT do this, unfortunately. They are both useful in particular cases though, so think about what you're trying to do:
cotton.m's first solution is best if order does not matter. In fact, as flounder first stated, whenever order doesn't matter, your most efficient bet is to use a Set instead of a List (or Vector) anyways.
Set vectB = new HashSet(vectA);This code maps to {banana, orange, grape, apple}, because HashSets are "randomly" ordered.
cotton.m's second solution is good if you want to impose NEW ordering on the List.
Set vectB = new TreeSet(vectA);This code maps to {apple, banana, grape, orange}, because TreeSet uses alphabetical-order on Strings by default.
java_2006, your solution is the most correct, but it's a little verbose for my taste :)
more importantly, the runtime-efficiency is pretty bad (n-squared). calling Vector.contains performs (at worst) n comparisons; you're going to call it n times! Set.contains usually performs 2 comparisons (constant, much better), so I suggest you USE a Set to do the filtering, while still sticking with your good idea to use a List. When the ordering is "arbitrary" (so can't use TreeSet) but still relevant (so can't use HashSet), you're basically talking about a List.
I think saving A LOT of time is worth using A LITTLE extra space, so here, let's save ourself some runtime, and some carpal-tunnel.
import java.util.*;
class Foo {
     public static void main(String[] args) {
          String[] fruits = {"apple","orange","grape","apple","apple","banana"};
          List     l = Arrays.asList(fruits),
               m = filterDups(l);
          System.out.println(m);
     // remember, both of the following methods use O(n) space, but only O(n) time
     static List filterDups(List l) {
          List retVal = new ArrayList();
          Set s = new HashSet();
          for (Object o : l)
               if (s.add(o))
                    retVal.add(o);     // Set.add returns true iff the item was NOT already present
          return retVal;
     static void killDups(List l) {
          Set s = new HashSet();
          for (Iterator i = l.iterator(); i.hasNext(); )
               if (! s.add(i.next()))
                    i.remove();
     // honestly, please don't use Vectors ever again... thanks!
     // if you're going to be a jerk about it, and claim you NEED a Vector result
     // then here's your code, whiner
     public static void mainx(String[] args) {
          String[] fruits = {"apple","orange","grape","apple","apple","banana"};
          List l = Arrays.asList(fruits);
          Vector v = new Vector(l);
          killDups(v);
          System.out.println(v);
}

XML Parsing Error: no element found Location:Line Number 1, Column 1:

Hi,
i have a servlet code in which i am using bouncy castle encryption algorithm , if i tried to run that servlet on embeded weblogic server than my servlet works fine without error.
but if i deploy same Servlet code on SOA domain console than i get following error.
XML Parsing Error: no element found
Location: http://localhost:7001/Encryption-PGPEncrypt-context-root/pgpservlet
Line Number 1, Column 1:
Please help me friends...

Hi Chandra,
Based on my research, the error message is only generated by FireFox when the render page is blank in Internet. For some reason, .NET generates a response type of "application/xml" when it creates an empty page. Firefox parses the file as XML and finding
no root element, spits out the error message.
Also, based on your description, the other sites are opened correctly, the issue only happened in Central Administration(CA). This means the SharePoint services are working fine.
Since this issue only occurred in the CA, it might be due the application pool for the CA is corrupted. Please try to restart the application pool for the CA to resove the issue:
1. Open Internet Information Service(IIS)
2. List the application pools
3. Select the application pool used for the CA
4. Stop it, and then start it again.
Note, if the application pool is running in Classic mode, please change it to be Integrated mode.
Additionally, I found a similar thread, which may help you too:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/824d7dda-db03-452b-99c4-531c5c576396
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

XML Parsing Error: no element found Line Number 1, Column 1:

Hi All,
I have deployed EAR on my standalone server using JDEV 11.1.1.6.0. I am able to get the WSRP portlet producer page on
http://<server>:7001/contextRoot. But when i try to click on any of the WSDL URL it gives me "XML Parsing Error: no element found Line Number 1, Column 1:"
and from IE it gives me: XML document must have a top level element. Error processing resource
there can be a issue with the WSRPContainer.jar file. So i have remove it from my deployment profile, EAR and lib/classpath files.
Can you please suggest a workaround.
Regards,
ND
Edited by: ND on Dec 4, 2012 9:57 PM

Hi All,
this error normally comes when the WLS domain is not not properly created. if you get some exception for ./provesecurity.sh file while creating the domain, then the XML error comes.
I did not went into the depth but figured out a workaround: restart the VM/hosted box and then create the domain, remember to use diff port name while creating it from the domain creation script.
Regards,
ND

XML Parsing Error: no element found In BI Publisher

Hi Gurus,
I tried to get XML output for a Data Model which was based on SQL queries.
But I got the following error in Firefox
XML Parsing Error: no element found
Location: http://localhost:9704/xmlpserver/servlet/xdo
Line Number 4, Column 1:
In IE I got an other error:
There is no end tag for DATA_SET
Any ideas?
Many thanks
Laszlo

Hi,
I use 11g.
I tried to create element link when I got this error.
Now I am using groupink.
Without using bind variable I got result (Cartesian product)
However if i created and used bind variable I got the same error
this is a dept data set:
select     "DEPARTMENTS"."DEPARTMENT_ID" as DEPTNO,
     "DEPARTMENTS"."DEPARTMENT_NAME" as "DEPARTMENT_NAME",
     "DEPARTMENTS"."LOCATION_ID" as "LOCATION_ID",
     "DEPARTMENTS"."MANAGER_ID" as "MANAGER_ID"
from     "HR"."DEPARTMENTS" "DEPARTMENTS"
this is the emp data set:
select     "EMPLOYEES"."COMMISSION_PCT" as "COMMISSION_PCT",
     "EMPLOYEES"."DEPARTMENT_ID" as "DEPARTMENT_ID",
     "EMPLOYEES"."EMAIL" as "EMAIL",
     "EMPLOYEES"."EMPLOYEE_ID" as "EMPLOYEE_ID",
     "EMPLOYEES"."FIRST_NAME" as "FIRST_NAME",
     "EMPLOYEES"."HIRE_DATE" as "HIRE_DATE",
     "EMPLOYEES"."JOB_ID" as "JOB_ID",
     "EMPLOYEES"."LAST_NAME" as "LAST_NAME",
     "EMPLOYEES"."MANAGER_ID" as "MANAGER_ID"
from     "HR"."EMPLOYEES" "EMPLOYEES"
WHERE "EMPLOYEES"."DEPARTMENT_ID" =:DEPTNO
Thanks for any tip!
Laszlo

Error rendering element. Exception: ORA-00942: table or view does not exist

Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
Raju

This is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein

On closing Photoshop CC, I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Can anyone shed some light on this error message I am getting upon closing Photoshop CC
I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Same issue here in WI and for me it was at 6:36p CST.
I'm changed my password, removed iCloud from my phone ... tried 3G and WIFI with no luck. I also cannot check it on my Mac or iPad. I was able to get contacts and calenders back on my phone but no mail yet.
Did the whole Apple support thing and apparently I'm part of the 1%
EDIT: Question: are all of you former MobileMe users as well? Just wondering because I know there were going to be some changes as they completely move MobileMe over to iCloud and drop the "extra" services. I just can't remember if it was just a single cut off date or a series of dates. THAT email is stuck in my iCloud folders.

BPM error:Container element in step transformation is not initialized

Hello Experts,
I am new to the concept of BPM.
I'm trying to create an integration process in which I'm taking an Idoc and processing it in many ways. The process contains many transformation steps. There two such transformation steps which have been placed in block step in a fork. And i get this error: Container element XXX in step transformation is not initialized
What could be the problem?
Regards,
Akhil

Hi
if u are getting the messaga with red sigh then it means it will craete the error while running the scenario.
but if it is in blue then i think it will not create any error.
the meaning of that statement is that the container u have defind is not used anywhere. it is just giving u a warning message.
Thanks
Rinku

Error: Invalid element 'servlet' in content of 'web-app'

Hi,
I m working on a project that includes JSPs, whenever I wanna add JSP to my project it shows following compilation error:
Invalid element 'servlet' in content of 'web-app', expected elements '[error-page, taglib, resource-env-ref, resource-ref, security-constraint, login-config, security-role, env-entry, ejb-ref, ejb-local-ref]'
I have thoroughly checked the web.xml. It is perfectly alright. It is as follows:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>myServlet</servlet-name>
<servlet-class>com.project.MainServlet</servlet-class>
<init-param>
Long postings are being truncated to ~1 kB at this time.

The Complete web.xml is as follows:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>montana</servlet-name>
<servlet-class>com.masstech.montana.boundary.uii.MainServlet</servlet-class>
<init-param>
<param-name>db</param-name>
<param-value>MontanaDS</param-value>
</init-param>
<init-param>
<param-name>user</param-name>
<param-value>MS</param-value>
</init-param>
<init-param>
<param-name>password</param-name>
<param-value>MS</param-value>
</init-param>
</servlet>
<servlet>
<servlet-n[i]Long postings are being truncated to ~1 kB at this time.

Installation error for elements 11 on mac

I keep getting this error and I don't know how to fix it and get it to install! Please help!
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
----------- Payload: {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirg4uZPBoU/Assets1/application/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" to "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" Error 0(Seq 3085)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 3085)
ERROR: DF024: Unable to restore file at "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" from backup at "/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/Cleanup At Startup/.tempiGYkJC" Error 0(Seq 3085)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 3085)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 11: Install failed
ERROR: DW050: - Elements 11 Organizer: Failed due to Language Pack installation failure
ERROR: DW050: - Elements 11 Organizer_AdobeElements11Organizer_en_US: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11_AdobePhotoshopElements11_en_US: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11: Failed due to Language Pack installation failure

Please move the application /Applications/Adobe Elements 11 Organizer.app to trash(take a backup if you want) and then try again. Please let us know if the issue still persists.

New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working, I have looked into sharing tab and my only option is Adobe email settings. I do have outlook set up to work on computer run

New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working, I have looked into sharing tab and my only option is Adobe email settings. I do have outlook set up to work on computer running windows 8.1 Please help, Mainly use to share pictures. Thanks!

One thing puzzles me:
RedClayFarmer wrote:
I then found one suggestion that the problem might involve permissions. The suggestion was to right click PhotoshopElementsOrganizer.exe in its installation folder (which on my computer is at at D:\Photo\Elements 11 Organizer) and run Organizer as an administrator. This also failed.
I don't understand why running the exe from the installation folder would have worked.
I would have simply tried to run that exe from its real location :
Sorry, I can't help you more about permissions...

Error: duplicate element "AddressOnParent"

Similar Messages

Maybe you are looking for