Error during activation of change list

I want to activate my changes in the change list of the intergration configuration. After activation I receive the error message:
unerwarteter Fehler bei Nachrichtenverarbeitung:
javax.transaction.HeuristicMixedException:
com.sap.engine.ts.exceptions.BaseHeuristicMixedException: One or more
XAResources were not commited because of Exception in the second commit
phase.
at com.sap.engine.services.ts.jta.impl.TransationImpl.commit
(TransactionImpl.java:451)

Hey Gregor,
This link talks about the status of change lists:-
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/frameset.htm
and this one shows how to organize change lists:-
http://help.sap.com/saphelp_nw04/helpdata/en/ab/3adb41083f6024e10000000a1550b0/content.htm
I hope they are helpful.
Regards
Sushumna

Similar Messages

Error During Activation while activating Report Selection Texts

Hi,
I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
Thanks and Regards,
Venkat

Hi ,
Try activating it through se80 , as it activates the complete object .
In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
Regards,
Sureshp.

Error during activation in Text Elements

Hi All,
I am getting ' Error during activation ' in Text Symbol While Creating new transport request.
and in Changing mode it's shows inactive mode For Previous Transport request user.
Please Suggest any Solution For that .
Thanks & Regards,
Manish

Hi Mahesh,
The Previous User Request already released .There is on Button there (active/inactive).
When i click this button it goes to display mode and shows status as active.
but when i click change mode it shows status as in active.
Thanks & regards,
Manish

Error During Activation of Web services

When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Aug 8, 2011 1:33 PM

Olivier, thank you so much
SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
I think the problem is related to user rights/profiles.
I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
Probably the new entry in SICF will be created after activating WS in SE80...
Do u know what user profile should I add in order to properly activate the WS in SE80?
Thank you very much!
Vicente

Error during activation of ExternalWebServiceIntegration

Hi All,
Has anyone got the following error during activation of ExternalWebServiceIntegration?
I am trying to create an ExternalWebServiceIntegration for a SOAP based ERP web service. I am able to create the ExternalWebServiceIntegration using the required WSDL file. But when I try to activate it, I get this error message.
Any idea on what could be causing this?
Thanks,
Sanat

Did you perform a "Check" and see if something's thrown at Output window?
If you don't have enough info to debug, then I suggest you raise an incident.

Error during activation of ODS data

Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.

Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful

Error during activation a message mapping

Hi,
I get this error during activation a message mapping:
source code has an syntax error:
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: package com.sap.aii.mappingtool.tfapi does not exist import com.sap.aii.mapping.api.; import com.sap.aii.mappingtool.tfapi.; ^ 1 error
Can anybody help me please??
Thanks.
Regards
Stefan

Hi Michal,
I do not have deleted some libraries in the XI-Installation.
I have some customer functions in other mappings but no message mapping without or with customer function can I activate, now.
The mappings are in serveral software components but it is no chance to activate a message mapping.
Regards,
Stefan

Error during activation in adobe form

Hi Guys,
While activating the adobe form i am getting the error message as 'Error during activation' with out any futher details.Its not showing any error details.Appreciate you for your help.
Regards
Syed

Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser

Error during manuel entry/Change of condition.

Dear friends,
while I am trying to create standard customer order(VA01), I have faced an error message as: Item 00001:Error during manuel entry/Change of condition.
Can anyone tell me solution?
Thanks in advance.

Hi,
Goto to V/08 for your pricing procedure, check for the condition type if it is mandatory condition and / or if it is manual condition.
In V/06, select condition type and check the value for Manual entry field
Hope you get some inputs
regards,
Sagar

Error during activation of text elements

Hello All,
I have a problem activating the text elements of a program. The
text elements can be edited but can not be activated. It displays an error during activation prompt.I tried deleteing it and recreating but still does not work.
Thanks in advance for all the help.
Rgds,
Anju

Have a look at:
Selection Text Activation
Amit.

Error during activation of adobe non-interactive form

Hello everyone,
I am trying to activate a non-interactive adobe form and am getting the below error:-
"Field p_lifnr has a conversion routine(see SAP note 796755)".
I have made sure that this field (which is corresponding to LFA1-lifnr) has context binding, I even tried using below code in its interface:-
GET PARAMETER ID 'LIF' FIELD p_lifnr.
and also tried the below:-
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = p_lifnr
        IMPORTING
          output = p_lifnr.
just in case..
but all above in vain,can someone let me know what might be the problem....or where would I find this 'SAP note 796755' ?
Thanks,
Rachna.

Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser

Error During Activation of Interactive form

Hi SAP Masterminds,
I'm working on Interactive forms in ECC 6.0 system with proper ADS Configuration. I have created an interactive form with two fileds in the interface as FIRSTNAME and LASTNAME. Now when I'm trying to activate the form it says error during activation. I have Adobe Reader 8.1 along with Adobe LiveCyscle Designer 7.1 installed on my system. Even I have checked the programs FP_TEST_00, FP_PDF_TEST_00 etc... to see whether ADS is configured correctly or not. They worked fine. Could you help me solve this problem by telling me what else should I check to make sure I can activate the form.
Thanks and Regards,
Maddineni.

Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser

Can't sign in to FaceTime or IMessage just keeps reading error during activation

CCan't sign into FaceTime or IMessage says error during activation help!!!

Hey June762,
Sorry to hear you are having these issues with your iPad. If you continue to get activation errors in FaceTime or Messages, you may find the info and troubleshooting steps outlined in the following article helpful:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Cheers,
- Brenden

Error during activation of DSO - Activation of M records from DataStore obj

Hi All,
Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable.
When -
During Activation of DSO
State of DSO -
Request become "RED", It is available for reporting, some records in Active table, some in new table and some in new table.
Job Log -
Error when inserting the data record for data package
Process 000105 returned with errors
Error when inserting the data record for data package
Process 000106 returned with errors
Process 000107 returned with errors
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_4GXKRYHMY97R9U62M6U52XXXY data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object Z_DSPO terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Detail log -
Error when inserting the data record for data package 106
Message no. RSODSO_PROCESSING002
Diagnosis
Failed to store data records persistently. Possible causes are:
You tried to save a record that is already stored in the database.
This error only occurs with DataStore objects with option "Unique Data Records".
A unique index was created for the table of active data.
You can check this in the Data Warehousing Workbench by choosing "Display" for the DataStore object and opening the "Indexes" folder.
There is a technical problem on the database.
Thanks,

HI PT,
I am also getting the same error like i have loaded the data into DSO and tried to activate the init request but it has become red and checked in log found that there are some SID Generation errors so please give me the step by step solution.
SID Generation
Data Package 000056
Data Package 000064.
Thanks in advance,
Jay

Hexadecimal error during activation of DSO from datasource

hi guys,
im facing this error during DSO data activation:
Value '"1st anniversary,birthday & staff party"' (hex. '2200310073007400200061006E006E00690076006500720073') of characteristic ZTXOSIK1 contains invalid characters
is there any routine that i can put in transformation to fix this error.. please advice.

Hi,
Long back i faced this Hex Values issue, i used the below code in the charecterictic routine of transforamtions
my source field was: TXZ01
my target infoObject was : ZMAT_TXT
please find the code below which i used, first read it and do the needful changes as per your requirement
FIELD-SYMBOLS: <ic> TYPE x.
 DATA: hex_count LENGTH 2 TYPE n.
 DATA: char_count LENGTH 2 TYPE n.
 DATA: x8 LENGTH 2 TYPE x.
 DATA:
 hex1(64) TYPE x VALUE
'00000020000100200002002000030020000400200005002000060020000700200008'
'002000090020000A0020000B0020000C0020000D0020000E0020000F0020',
 hex2(64) TYPE x VALUE
'00100020001100200012002000130020001400200015002000160020001700200018'
'002000190020001A0020001B0020001C0020001D0020001E0020001F0020'.
 IF SOURCE_FIELDS-txz01 = ' '.
 RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
 ENDIF.
 RESULT = SOURCE_FIELDS-txz01.
 hex_count = 0.
 char_count = 0.
0000---001F
 ASSIGN RESULT TO <ic> CASTING TYPE x.
 DO.
 MOVE <ic>+hex_count(2) TO x8.
 SEARCH hex1 FOR x8 IN Byte MODE.
 IF sy-subrc <> 0.
 SEARCH hex2 FOR x8 IN BYTE MODE.
 IF sy-subrc = 0.
 result+char_count(1) = ' '.
 ENDIF.
 ELSE.
 result+char_count(1) = ' '.
 ENDIF.
 IF hex_count < 78.
 ADD 2 TO hex_count.
 ENDIF.
 ADD 1 TO char_count.
 IF char_count >= 40.
 EXIT.
 ENDIF.
 ENDDO.
Regards
Reddy A

Error during activation of change list

Similar Messages

Maybe you are looking for