Error during activation of objects

Activation of the change list canceled Check result for Data Type ExchangeLogData | http://clnt_prxy.com:  Namespace http://clnt_prxy.com is not defined in the software component version ZTEST_SWCP , 1.0 of ztest.com
can you please let me how to correct this
even if i change the name space name and give it as urn://clnt_prxy.com
its giving me the same error

Hello KM,
When you try to activate the objects, select all of them and then activate.
If that doesnt work first activate changes which you made to SCV ZTEST_SWCP after that you can activate the remaining objects.
Regards,
Sumit

Similar Messages

  • Error when activating DataStore Object

    Hello,
    We have an ODS object which is in avtive stage in ECC DEV system. When
    we transport it to ECC QA system it can not be activated and shows
    follwoing errors :
    1) Internal error occurred when writing
    Message no. D0054
    2) Error while saving change log for DataStore object DSO_PL
    Message no. RSDODSO196
    3) Error during creation of DDIC sources of DataStore Object DSO_PL
    Message no. RSO435
    4) Error when activating DataStore Object DSO_PL
    Message no. RSO404
    We also observe that even we create new ODS object in ECC QA system,
    still it give the same errors while activating.
    Note - ECC QA is a system copy of ECC PROD.
    Please suggest.

    Hi,
    I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
    Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
    maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
    errors for the myself connection you should go to sm59 and do the connection and authorization test for the
    RFC connection for the myself connection.
    Best Regards,
    Des.

  • Error During Activation while activating Report Selection Texts

    Hi,
         I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
    Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
    Thanks and Regards,
    Venkat

    Hi ,
    Try activating it through se80 , as it activates the complete object .
    In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
    Regards,
    Sureshp.

  • Error while activating ODS Object (urgent)

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log  --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.     
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Hi venkat,
    There are only 3 info objects which  i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
    Is this issue is related to any authorization concerned?
    Urs,
    Raki.

  • Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Frank,
    There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
    Strange i m unable to find out the solution.
    Urs,
    Raki.

  • 0FIA_DS11:Error when activating DataStore Object

    Hi,
    We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
    Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
    however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
    We have replicated the datasources 0FI_AA_11 and 0FI_AA_12  in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given  error.
    " DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A     
    Error when creating the export DataSource and dependent Objects
    Error when activating DataStore Object 0FIA_DS11 "
    We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
    System is BI 7 with EHP4 ehanced packege.
    Please suggest.
    Thanks & Regards,
    SMS

    Hi Jonas,
    I understand the procedures and had followed all the procedures.
    We had resolved the issue and issue was with the IP in sm59.
    It is cleared.
    Thanks for the reply.
    Regards,
    S M S

  • Error During Activation of Web services

    When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Aug 8, 2011 1:33 PM

    Olivier, thank you so much
    SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
    I think the problem is related to user rights/profiles.
    I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
    Probably the new entry in SICF will be created after activating WS in SE80...
    Do u know what user profile should I add in order to properly activate the WS in SE80?
    Thank you very much!
    Vicente

  • Error during activation of ExternalWebServiceIntegration

    Hi All,
    Has anyone got the following error during activation of ExternalWebServiceIntegration?
    I am trying to create an ExternalWebServiceIntegration for a SOAP based ERP web service. I am able to create the ExternalWebServiceIntegration using the required WSDL file. But when I try to activate it, I get this error message.
    Any idea on what could be causing this?
    Thanks,
    Sanat

    Did you perform a "Check" and see if something's thrown at Output window?
    If you don't have enough info to debug, then I suggest you raise an incident.

  • Error during activation of ODS data

    Hi all,
    I am getting error during activation of ODS data.
    Error: Error occur during activation.
    How to check , where that error exactly occurs.
    Appreciating any response.

    Hi Santosh,
    SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
    there are various status they are
    PLANNED
    RELEASED
    CANCELLED
    ACTIVE
    FINISHED
    READY
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
    In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
    hope this helps
    regards
    Karthik
    Assign points if helpful

  • Error during activation a message mapping

    Hi,
    I get this error during activation a message mapping:
    source code has an syntax error:
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: package com.sap.aii.mappingtool.tfapi does not exist import com.sap.aii.mapping.api.; import com.sap.aii.mappingtool.tfapi.; ^ 1 error
    Can anybody help me please??
    Thanks.
    Regards
    Stefan

    Hi Michal,
    I do not have deleted some libraries in the XI-Installation.
    I have some customer functions in other mappings but no message mapping without or with customer function can I activate, now.
    The mappings are in serveral software components but it is no chance to activate a message mapping.
    Regards,
    Stefan

  • Error during activation in adobe form

    Hi Guys,
       While activating the adobe form i am getting the error message as 'Error during activation' with out any futher details.Its not showing any error details.Appreciate you for your help.
    Regards
    Syed

    Hi,
    I am facing the same problem of "Error during activation" while activating the SAP interactive form.
    I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
    Could you please suggest a way out.
    Thank You
    Aser

  • Error during activation of text elements

    Hello All,
    I have a problem activating the text elements of a program. The
    text elements can be edited but can not be activated. It displays an error during activation prompt.I tried deleteing it and recreating but still does not work.
    Thanks in advance for all the help.
    Rgds,
    Anju

    Have a look at:
    Selection Text Activation
    Amit.

  • Error during activation in Text Elements

    Hi All,
    I am getting ' Error during activation ' in Text Symbol While Creating new transport request.
    and in Changing mode it's shows inactive mode For Previous Transport request user.
    Please Suggest any Solution For that .
    Thanks & Regards,
    Manish

    Hi Mahesh,
    The Previous User Request already released .There is on Button there (active/inactive).
    When i click this button it goes to display mode and shows status as active.
    but when i click change mode it shows status as in active.
    Thanks & regards,
    Manish

  • Error during activation of adobe non-interactive form

    Hello everyone,
    I am trying to activate a non-interactive adobe form and am getting the below error:-
    "Field p_lifnr has a conversion routine(see SAP note 796755)".
    I have made sure that this field (which is corresponding to LFA1-lifnr) has context binding, I even tried using below code in its interface:-
    GET PARAMETER ID 'LIF' FIELD p_lifnr.
    and also tried the below:-
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = p_lifnr
            IMPORTING
              output = p_lifnr.
    just in case..
    but all above in vain,can someone let me know what might be the problem....or where would I find this 'SAP note 796755' ?
    Thanks,
    Rachna.

    Hi,
    I am facing the same problem of "Error during activation" while activating the SAP interactive form.
    I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
    Could you please suggest a way out.
    Thank You
    Aser

  • Error During Activation of Interactive form

    Hi SAP Masterminds,
    I'm working on Interactive forms in ECC 6.0 system with proper ADS Configuration. I have created an interactive form with two fileds in the interface as <b>FIRSTNAME</b> and <b>LASTNAME</b>. Now when I'm trying to activate the form it says <b>error during activation</b>. I have <b>Adobe Reader 8.1</b> along with <b>Adobe LiveCyscle Designer 7.1</b> installed on my system. Even I have checked the programs <b>FP_TEST_00, FP_PDF_TEST_00</b> etc... to see whether ADS is configured correctly or not. They worked fine. Could you help me solve this problem by telling me what else should I check to make sure I can activate the form.
    Thanks and Regards,
    Maddineni.

    Hi,
    I am facing the same problem of "Error during activation" while activating the SAP interactive form.
    I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
    Could you please suggest a way out.
    Thank You
    Aser

Maybe you are looking for