Error during activation of text elements
Hello All,
I have a problem activating the text elements of a program. The
text elements can be edited but can not be activated. It displays an error during activation prompt.I tried deleteing it and recreating but still does not work.
Thanks in advance for all the help.
Rgds,
Anju
Have a look at:
Selection Text Activation
Amit.
Similar Messages
-
Error during activation in Text Elements
Hi All,
I am getting ' Error during activation ' in Text Symbol While Creating new transport request.
and in Changing mode it's shows inactive mode For Previous Transport request user.
Please Suggest any Solution For that .
Thanks & Regards,
ManishHi Mahesh,
The Previous User Request already released .There is on Button there (active/inactive).
When i click this button it goes to display mode and shows status as active.
but when i click change mode it shows status as in active.
Thanks & regards,
Manish -
Error During Activation while activating Report Selection Texts
Hi,
I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
Thanks and Regards,
VenkatHi ,
Try activating it through se80 , as it activates the complete object .
In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
Regards,
Sureshp. -
Error During Activation of Web services
When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Aug 8, 2011 1:33 PMOlivier, thank you so much
SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
I think the problem is related to user rights/profiles.
I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
Probably the new entry in SICF will be created after activating WS in SE80...
Do u know what user profile should I add in order to properly activate the WS in SE80?
Thank you very much!
Vicente -
Error during activation of ExternalWebServiceIntegration
Hi All,
Has anyone got the following error during activation of ExternalWebServiceIntegration?
I am trying to create an ExternalWebServiceIntegration for a SOAP based ERP web service. I am able to create the ExternalWebServiceIntegration using the required WSDL file. But when I try to activate it, I get this error message.
Any idea on what could be causing this?
Thanks,
SanatDid you perform a "Check" and see if something's thrown at Output window?
If you don't have enough info to debug, then I suggest you raise an incident. -
Error during activation of ODS data
Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful -
Error during activation a message mapping
Hi,
I get this error during activation a message mapping:
source code has an syntax error:
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: package com.sap.aii.mappingtool.tfapi does not exist import com.sap.aii.mapping.api.; import com.sap.aii.mappingtool.tfapi.; ^ 1 error
Can anybody help me please??
Thanks.
Regards
StefanHi Michal,
I do not have deleted some libraries in the XI-Installation.
I have some customer functions in other mappings but no message mapping without or with customer function can I activate, now.
The mappings are in serveral software components but it is no chance to activate a message mapping.
Regards,
Stefan -
Error during activation in adobe form
Hi Guys,
While activating the adobe form i am getting the error message as 'Error during activation' with out any futher details.Its not showing any error details.Appreciate you for your help.
Regards
SyedHi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser -
Error during activation of adobe non-interactive form
Hello everyone,
I am trying to activate a non-interactive adobe form and am getting the below error:-
"Field p_lifnr has a conversion routine(see SAP note 796755)".
I have made sure that this field (which is corresponding to LFA1-lifnr) has context binding, I even tried using below code in its interface:-
GET PARAMETER ID 'LIF' FIELD p_lifnr.
and also tried the below:-
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_lifnr
IMPORTING
output = p_lifnr.
just in case..
but all above in vain,can someone let me know what might be the problem....or where would I find this 'SAP note 796755' ?
Thanks,
Rachna.Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser -
Error During Activation of Interactive form
Hi SAP Masterminds,
I'm working on Interactive forms in ECC 6.0 system with proper ADS Configuration. I have created an interactive form with two fileds in the interface as <b>FIRSTNAME</b> and <b>LASTNAME</b>. Now when I'm trying to activate the form it says <b>error during activation</b>. I have <b>Adobe Reader 8.1</b> along with <b>Adobe LiveCyscle Designer 7.1</b> installed on my system. Even I have checked the programs <b>FP_TEST_00, FP_PDF_TEST_00</b> etc... to see whether ADS is configured correctly or not. They worked fine. Could you help me solve this problem by telling me what else should I check to make sure I can activate the form.
Thanks and Regards,
Maddineni.Hi,
I am facing the same problem of "Error during activation" while activating the SAP interactive form.
I am using ECC 6.0, ADL 7.1 and Adobe reader 8.0
Could you please suggest a way out.
Thank You
Aser -
Can't sign in to FaceTime or IMessage just keeps reading error during activation
CCan't sign into FaceTime or IMessage says error during activation help!!!
Hey June762,
Sorry to hear you are having these issues with your iPad. If you continue to get activation errors in FaceTime or Messages, you may find the info and troubleshooting steps outlined in the following article helpful:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Cheers,
- Brenden -
Dump error when clicked on text elements in SAP Script window
Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
Invalid partial field access: Length is too large
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLSTXK", the system attempted to access the field
"ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
However, a partial field access with a length specification that is
larger than the field length is not allowed.
How to correct the error
Reduce the length used to access the field.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"SAPLSTXK" or "LSTXKFRN"
"TOKEN_COMMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
RekhaHi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel -
Error in Assignment of Text Elements of Report to Transport
Hi All,
I have transported few reports to Quality system however the texts elements associated with those reports have not transported to Quality system .
Now I am trying to assign these text elements to new Transport however I am getting error while activation and messgae just displays " Error in Activation " .
The Original system of these reports is different from my current development system. The Transport Layer of Package and Transport is same.
Please advice . Thanks.Hi,
Try to transport the text-elements along with the report to the quality server. Save and activate the text-elements and the report in the same transport request and then transport to quality system.
Regards,
Vik -
Hello Experts,
I am getting an error while activating a DC on the track. There are no build errors nor any runtime errors, but after checkin, when I try to activate the DC, it gives me a generation error :
ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
The detailed error is :
[wdgen] [Error] .Ctx_vn_SkillsApplicable: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .Ctx_vn_SkillsApplicable.Ctx_va_SkillID: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.ltitl.tdc.wd.view.tdc_wimsedit.Tdc_wimsedit --> ContextValueAttribute Ctx_va_SkillID [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
[wdgen] [Error] .Ctx_va_Associated: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.ltitl.tdc.wd.view.tdc_wimsedit.Tdc_wimsedit --> ContextValueAttribute Ctx_va_Associated [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
[wdgen] [Error] com.ltitl.tdc.wd.view.tdc_wimsedit.Tdc_wimsedit --> TextEdit TextEdit_AssoWIMS [value]: Context element and property are not compatible
Please assist on this.
Thanks and Regards,
Divyata
Edited by: Divyata Dal on Jan 8, 2009 7:52 AMI had trouble like this where the DC worked great locally but did not deploy upon check in. I was guided to an easy to miss button in the CMS. Some how there was "old stuff" it was trying to use so I had to reintitalize the compartment
Per SAP
You could try to initialise compartment of the SC in CBS to recreate
CBS cache of DTR sources.
Afterwards try to activate again.
This intialize button is found at CBS Web UI > CBS Buildspace Details > Build Compartment tab > the initialize button is at the bottom of page.
Regards,
Diane
Edited by: Diane Fuller on Jan 8, 2009 6:57 AM -
Error during activation of NitroX Free JSP Editor
Thank you for downloading NitroX.
If you experienced an error during the activation of the NitroX Free JSP Editor due to an earlier trial version already installed, please click the following link to activate the product and this will resolve the issue:
https://devclub.m7.com/getFreeJsp.do
If you have any other questions please do not hesitate to contact us.
M7 SupportI activated NitroX fine last night at home, but I tried it at work which uses a proxy server, and it's failing activation.I then tried manually pasting the code from the web site as mentioned in this post, but when I hit OK it just says that NitroX will not be available.
I am having the same problem.
Maybe you are looking for
-
HDMI cable/adapter causing feedback interference in studio monitors
Hi I just bought an HDMI cable/adapter to connect my MacBook Pro to my LCD tv and as soon as I connect my studio monitors through my MBox interface, I got really loud CPU feedback through my monitors. Any suggestions? really trying to have a nice stu
-
Hello, I installed all of the software which I believe is needed to create a website from scratch. I am stuck trying to figure out if I need to use JDeveloper or SiteStudio to create a simple hello world home page. Off the OUCM tab under WinXP is Sit
-
Hi, I've narrowed down this problem to the vibration feedback. It's driving me crazy!!! When the vibration feedback for screen touches happens it makes this weird squeaking sound like the phone is in pain. For the moment I've switched off vibration f
-
Is it possible to program a question and response logic into TCL scripts? I'd like to be able to capture user input and take action based on that input. Is that possible? If so, could you please point me to a resource where I can learn more about
-
Dear expert, in the Choose Company window the database's list is empty. SAP B1 88 PL11 Thanks. Paolo