Error during approval Process flow in Process controlled workflow

Hello Experts,
We are in SRM 7.0 classic scenario using Process controlled workflow.WE recently connected a new backend R/3 system to our SRM system i.e we now have 2 R/3 backend system connected to SRM system
It is regarding the two new additional account assignment categories that came into picture when we connected the new R/3 backend system to our SRM system, i.e. Asset and Network.
There seems to be some problem with the approval workflow for those SHC, that have such Acc *** Cats.
Please find below my obeservations:
- if you have just one line item in the SHC, and this item is either booked on Asset or on Network, than everything goes fine. After the Acc *** approval, the PR is created in R/3
- if you have SC with a mix between an "old" Acc *** Cat (Cost Centre, WBS and Order) and one of the "new" Acc *** Cats, than the workflow is not working as required --- the manager, that is responsible for the accounting approval of the two positions (e.g Cost Centre and Asset) gets only one work item in his approval overview --- in that work item, the two positions are there, but the Asset one is grayed out --- so, the Manager approves only the Cost Centre positions and than the SC is no longer with the approver --- if you observe the SC now from the requisitioner point of view, the status of the line items in the approval process overview of both(!) lines is "approved", but the overall status of the SC is still "in approval"
Can you all experts plz let us know why this is happening and how this can be resolved?
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

Hi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa

Similar Messages

Can't see process flow locations in control center

Hi there
We have process flows which pointing to process flow locations. Can see these locations in Design Center but when try delopy the process flows can't since the process flow locations are not visible.
How do you make these locations visible in the Control Center.
Many Thanks

Hi there
found out how to do this - double-click the control center and see the various locations it can see on the right hand side - the process flow ones were on the left - simply added them to right and can now see in control center and deploy.
Many Thanks

Duet has encountered an error during Approve , Reject Reassign the workflow

Hi,
We have implemented DUET with two scenario (LEMA & WOMA) in our organization. When try Approve , Reject or Reassign the Duet work flow Item Duet has encountered an error . The scenario was working fine earlier. Suddenly the error has start coming. The error is coming in a pop up window. I am attaching the error details from event log.
Event Type:     Error
Event Source:     Duet Diagnostics
Event Category:     None
Event ID:     0
Date:          1/04/2010
Time:          10:49:37 AM
User:          N/A
Computer:     xxxxxxxxxxx001
Description:
Error in Approve/Reject from Approver Mail.
Exception message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Method: Close
StackTrace:   at Microsoft.Office.Interop.Outlook._MailItem.Close(OlInspectorClose SaveMode)
   at SAP.Office.Apps.Leave.Outlook.LeaveApproverMailInspectorCodeBehind.AfterOnSelectControl(String name, String param)
     =====Additional Information=====
oba://oba.microsoft.com/outlook?boundItemId=
Bound Item ID:
Bound Item Type:
Correlation ID:
Process Name: C:\PROGRA1\MICROS3\Office12\OUTLOOK.EXE
User Name: xx\99901
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks in advance,
Monirul Islam

HI Monirul,
You can get better advice and help in another forum dedicated to Duet only.
Regards,
Sangvir

Start OWB Process Flow Schedule Job in Workflow Manager

I am trying to get the Oracle Workflow Schedule to execute my Oracle Warehouse Builder (OWB) Process Flow. Please note that execute Process Flow from the OWB deployment manager works fine. I did the following but nothing being executed:
Info:
OWB: 10g
Oracle DB: 10g
Oracle Workflow: 2.6.3
OracelAS: NONE
1. From the Oracle Workflow Manager browser, click the Background Engines->Submit New
2. Insert the following parameter:
Work Item Type: LD_STG
Run Date and Time: 10/18/2004 17:40:00
Run Every: 0 days, 00 hours, 01 minutes, 00 seconds
3. Click ok and system showed "Successfully submitted Background Engine with job number 107"
However, after the specificied schedule time, nothing happened. No error shown in the Work Item.
Any help are greatly appreciated. Thanks.

This is a Oracle Workflow client problem. Can you post this to the workflow forum (Workflow
Regards:
Igor

Process flow in Process industry

Hi PP Gurus,
I want to have an idea about flow of process order in process industry with the details how the cost are captured per day if the process order continues for many days.
Pl guide me in the process
Thanks in advance
Shanmugam Balamurugan

Important Things Involved:
O10C --- Control Recepie Destination (Clubbing of recurring PICs)
O12C --- Process Instruction Category (PICs) -- Clubbing of Process Instruction Chars to be displayed
as per requirement on PI Sheet.
O13C --- Process Message Category --- After we have recorded the Enteries in PI sheet, If we need to update some ABAP/ Z table or We need to Trigger some program with those values then mapping for that is done here.
BOM:CS01
Resource:CRC1
Master Receipe:C201
Production Version:C223
PI Characteristics:Ct04/O25C
PP Process Flow:Cr01>Co53>co60/co55/co64/co67-->CO57
SOP:MC84>MC81>mc76>mc75>md63
Demand Management: MD61>MD02>MD04-->Cor1
MRP Run: MD02,MD04

Process Flow Deployment using Oracle workflow

Hi,
If I have my own Process Flow in XPDL, can I deploy it to the Oracle workflow? I couldn't find any doc regarding how Oracle workflow (standalone) imports XPDL file.
Is the Oracle workflow packaged with the OWB comes with some adapter that understand the XPDL process flow?
I have an application that may output process flows in XPDL, and I want to deploy them to Oracle workflow for processing. How do I do that?
Thanks,
Denny

Hi,
I´ve used it in 2 system as a DM. It works fine. But I have to say that they were a small project.
OWF is a very robust and easy tool. I´ve never need to look for another workflow because OWF always cover my project. When it doesn´t, I´m able to change some pl/sql procedures to make it attend project requirements.
I can advice you that if you want a personalized user interface, you are going to spend more time doing it than developing your workflow. but if you don´t need to personalize user interface, so it is very easy do develop and deploy a workflow.
Any doubt just ask.
Regards,
Luiz Soares

Process Flow - External process - Return status

Did any one know how to capture or get the return value when executing a shell script thru Process flow - User defined - External process?
This is the scenario.
OWB Server on UNIX. Version-10.2, Database-9i
I am executing a simple "whoami" command thru the user-defined process.
How do I capture the return value?
One of my shell script returns a value. Based on this return value I have to send a page or schedule a dependency job on successful completion.
Thanks.

To add a parameter to the process flow, you will have to add a parameter to the start activity in the activity view (lower left corner of the process flow editor), by clicking the Add button.
You can then pass this parameter to the other activity by using the parameter binding - click on the BINDING column of the activity parameter you want to pass it to and select the parameter added to the start activity in the previous step from the drop down list.
When the PF is run, the user will be prompted for a parameter, then it will be passed to the next activity.
Regards:
Igor

Error during calculation of work in process (WIP)

Hi all,
I have a problem during calculation of WIP. After entering all data, system reports me that WIP calculation could not be done because of following error:
Create a cost element for the usage of inventory (line ID COP)
Message no. KJ307
Diagnosis
In results analysis, capitalized costs are created and apportioned to the line IDs. If the Split creation/usage indicator is set in the extended control of the results analysis version, then the usage of the capitalized costs is written under a separate results analysis cost element for each line ID.
Procedure
Go into Customizing for Product Cost Controlling and carry out the following steps:
1. Create a cost element for the capitalized costs used for line ID COP.
2. Enter this cost element under Define Update for Results Analysis.
I can't find transaction or path for solution from the procedure. Pls help.
Thank you all.

Hi Uros,
Hope my reply wil help u.
U can find this trasaction path at ,
SPRO--> Reference IMG --> Controlling --> Product Cost Controlling --> Product Cost Planning --> Define Cost Element
Find Assingment of Cost Element under Information Systems
--> Define Update

Error during approval of customized Work Schedule Substitution Request

Hi Gurus,
Good day!
Just wanted to check your inputs on an error encountered during execution of a customized application done for the MSS approval of a work schedule substitution request
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Wrong WebDynpro-URL: no application name specified
Exception id: [E41F13C50EFA007600000227000011180004AAD57AFD5474]
In simple terms, what does this error mean and what are the items that we need to check?
Regards,

The error means the dispatcher can't find the WebDynpro application.
1. Make sure the Business package which contains the application is installed properly (most likely not).
2. Make sure the PCD-Path / Folder which contains the iView has end user permissions.
3. Also check whether the System ID the iView corresponds with has end user permissions.
Also, please always post the entire error log, most of the time the errors are nested and analyzing an error with only the thrown error (which isn't the root cause) is like pulling teeth :-S
regards, Lukas

Oracle Service Registry --HTTP 404 Error During Approval & Account activity

Hello,
Environment: OSR 11.1.1.2 ; Database : 11g Database ; Embedded HTTP Server; Windows 7 (1 Discover Node and 1 Publisher node).
I have done the installation of Discovery node and Publishing node . I could access BSC and registry control and could login with admin user and demo users. However, in publishing node, when I try to create account or promote a published provider/service, I am getting a fatal error displayed in the web page.
Error while creating account in Publish node:
Fatal error occurs in account management.
Error while promoting providers,services in Publish node:
RequestDenied.Automatic context checking has failed. Your approval request has been unsuccessful.
For both the errors , errorEvents.log shows the following error
Caused by: javax.xml.messaging.JAXMException: org.systinet.wasp.client.XMLInvocationException: Exception while processing incoming message message. Unable to read server response. Server returned status code: 404 (Not found) (Content-type:text/html):
*<HTML>*
*<HEAD>*
*<TITLE>Error 404 Not Found</TITLE>*
*<BODY>*
*<H2>HTTP ERROR: 404 Not Found</H2>*
*<!-*
I tried to capture the SSL traffic between Publish node and Discover node for the above two activities. Following the is the trace
POST //uddi/production HTTP/1.1
User-Agent: Systinet Server for Java/6.0 (Java/1.6.0_18; Windows XP/5.1; build SSJ-6.0-20091204-1155)
Connection: keep-alive
SOAPAction: ""
Content-Type: text/xml;charset=UTF-8
Content-Length: 230
*<?xml version="1.0" encoding="UTF-8"?>*
*<Envelope xmlns="http://schemas.xmlsoap.org/soap/envelope/"><Body><get_userAccount xmlns="http://systinet.com/uddi/account/5.0"><loginName>rews</loginName></get_userAccount></Body></Envelope>HTTP/1.1 404 Not Found*
Server: Systinet Server for Java/6.0 (Java/1.6.0_18; Windows 7/6.1; build SSJ-6.0-20091204-1155)
Content-Type: text/html
Content-Length: 818
It is trying to post it to the URL "/uddi/production", which seems to be unavailble. Not sure whether this is a configurable entry or is it missing in my installation.
Appreciate any help in understanding and resolving the problem.
Thanks

I tried using Weblogic application server instead of Embedded HTTP server. However the issue remains the same. Followng is the packet capture of traffic when account creation or approval acitivity is carried out in Publish node
The issue seems to be with *//* before *'uddi/production'* string in the POST request.
##Packet capture -- Start##
POST /registry//uddi/production HTTP/1.1_
User-Agent: Systinet Server for Java/6.0 (Java/1.6.0_18; Windows XP/5.1; build SSJ-6.0-20091204-1155)
Connection: keep-alive
SOAPAction: ""
Content-Type: text/xml;charset=UTF-8
Content-Length: 231
<?xml version="1.0" encoding="UTF-8"?>
<Envelope xmlns="http://schemas.xmlsoap.org/soap/envelope/"><Body><get_userAccount xmlns="http://systinet.com/uddi/account/5.0"><loginName>test1</loginName></get_userAccount></Body></Envelope>HTTP/1.1 404 Not Found
Date: Mon, 28 Feb 2011 19:37:09 GMT
Server: Systinet Server for Java/6.0 (Java/1.6.0_18; Windows 7/6.1; build SSJ-6.0-20091204-1155)
Content-Length: 0
X-Powered-By: Servlet/2.5 JSP/2.1
##Packet capture -- END##
Anybody have come across this problem?

CTS + error during deployment There is no cluster control instance running on host

We are running our QA portal in a cluster (3 hosts..one for MS, 1 for ERS, 1 for JC). The alias for the JC is <jcalias> and the real name of the host is <clustername1). So depending on which component is one which of the 3 cluster hosts wil dictate which host <jcalias>.
But when trying to deploy a portal archive via CTS+, we get error:
Jul 24, 2014 11:18:12... Error: An error occured while starting a cluster instance.
Jul 24, 2014 11:18:12... Error: There is no clutser control instance running on host sapepqci which is described in SecureStorage .
The instances, returned by MessageServer [MS host: <msalias>; MS port: 3912], are :
Name:JM_T1405698721103_0_<clusterhost1>.viacom.com Host:<clusterhost1>                                                        HostAddr: aaa.bbb.ccc.ddd State:5
Name:JC_<jcalias>_EPQ_14                       Host:_<clusterhost1>.                                                        HostAddr: aaa.bbb.ccc.ddd
State:5
Name:JC_<appsrvr1>_EPQ_00                     Host:<appsrvr1_IP>                                                   HostAddr: <appsrvr1_IP>
State:5
Name:JC_<appsrvr2>_EPQ_00                     Host:<appsrvr2_IP>                                                    HostAddr: <appsrvr2_IP>
State:5
Please check if there is an appropriate running cluster instances. For more inforation check CSN Note 1276366
Jul 24, 2014 11:18:12... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
I have checked the referenced not. The profiles all use the JCALIAS as the host name, and in the configtool secure store it's also specified in admin/host/<SID>
If I change it in the secure store to the real name (clusterhost1) that the message server is giving, it will probably work. But what happens in the future when, after a cluster resart, <jcalias> gets assigned to <clusterhost2> instead? I'd rather be able to use the alias in secure store and for the message server to pick that name up and use it.

Hi David
Jul 24, 2014 11:18:12... Error: An error occured while starting a cluster instance.
Jul 24, 2014 11:18:12... Error: There is no clutser control instance running on host sapepqci which is described in SecureStorage .
You cluster resources are online?
BR
SS

Missing Workflow XAML Feature Error during site creation from custom template Microsoft.Workflow.Client.ActivityNotFoundException

Hi,
I am using SharePoint 2013 Enterprise with the March CU.
I created a project site template with libraries, lists and workflows and saved it as a template with content. When I try to create a new site using this template, I get the error pasted at the bottom.
I was using SharePoint designer workflow custom activities created in VS2012. I uninstalled those and decided to call a web service directly from SharePoint designer. The workflows work fine inside of the site which I want to create a project template
from. When creating a new site from the template, SharePoint complains about a missing workflow XAML feature.
Do I have some leftover references to the custom features? Does anyone know how to resolve this issue?
<nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c'
was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e'
from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c' was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c.
Client ActivityId : 69e6449c-9c3c-f090-404f
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x8107058a): <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c'
was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f]
Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +0
Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +293
[SPException: Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c' was not found.
HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +889
Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors)
+928
Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) +532
Microsoft.SharePoint.ApplicationPages.TemplatePickerUtil.ApplyWebTemplateAndRedirect(SPWeb Web, String strWebTemplate, Nullable`1 bSharedNav, Boolean bOnTopNav, Boolean bOnQuickLaunch, Page page, Boolean bDeleteOnError, SPFeatureDependencyErrorBehavior
featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) +2076
Microsoft.SharePoint.ApplicationPages.NewSubwebPage.BtnCreateSubweb_Click(Object sender, EventArgs e) +861
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +146
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3586
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18045

Hi Jerry Choinski,
For your error, It could possibly have something to do with that the workflow did not publish before saving your project site as a template.
The "Elements.xml" file, which is packaged within the "wsp" solution file contains 2 "<File" elements. One file element represents the XAML file, and the other
represents the WF association file. If the WSPublishState value for each "<File" element differ (one has a value of "3" and the other a value of "1"), the error will occur. For solving your problem, please update the WSPublishState value for both "<File"
elements to “3”.
PropertyName="WSPublishState"
Value="3"
Also note that the WSPublishState property is also duplicated within the "MetaInfo" property, so both occurrences should be updated. Then the resulting files need
to be re-packaged into the template.
Reference :
http://social.technet.microsoft.com/Forums/en-us/be41f1c5-1dfb-4869-9a52-1c93902bfd91/microsoftworkflowclientactivitynotfoundexception-when-deploying-solution-with-workflow
Please inform me freely if you have any questions.
Thanks

Error while approving time sheet in ESS using workflow

Hi Experts,
We have created a data entry profile for ESS time recording and in that we have used the standard task id TS20000460 for SAP workflow with auto determination of recipient. Whenever employee enters the time and save it the workflow is trigring and its going for manager's approval. But however when manager trys to approve it's throwing below error.
Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.mss/com.sap.pct.erp.srvconfig.CatsApproval/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.ManagerApprove failed.
Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.mss/com.sap.pct.erp.srvconfig.CatsApproval/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.ManagerApprove failed.
I have maintained below mentioned configuration.
I have created a Approval profile and assigned the same to managers using CATS_APPR_PROF user parameter.
Please help in rectfying the problem
Regards,
Koutilya A.K

check in the portal if the ID's exist
Also, check if the manager has authorization's in the portal for the objects

OWB Process Flow - How is the best version control tool ??

HI all,
I just start work with OWB and I have a question to know how is the best way to do something.
Imagine the scenario below:
If I have 2 or more requests for example:
Request 1: Create a Dimension City.
Request 2: Create a Dimension Products.
I Have ONE process flow and i need put my changes inside. This is my problem.
In my scenario I don't know what Request goes to Prod First.
If I put the Request 1 and Request 2 in my PROCESS FLOW, maybe I need change is someone decide change MY REQUEST PRIORITY.
There is something in OWB to "control the version or changes" ?? For a mapping I export the MDL and commit on SVN, but I dont know haw can i do with the process flow.
Something to agree multiples peoples work in different mappings and a SAME PROCESS FLOW ??
What is best way to work with process flow and version control.
What are the best practices when it comes to version control?
Thanks.

Amit,
Are you really doing this in 10.1.3.x and not 11g?
At any rate, I don't see how #2 and #3 relate whatsoever to your choice of a version control system. OK, maybe in #2 if there is some "maintenance" activity to be done against the version control server. Subversion is the open source alternative that you listed there and is pretty commonly used. If your company is already using one of the mentioned tools, why change? About the only thing I'd mention is to advise you NOT to use CVS for well documented reasons (JDev does support it) - if you would have picked CVS otherwise, choose Subversion. As far as question #1 - I've only used Subversion (well, I did use CVS for a while) with JDeveloper, so I can say it was "effective enough for me." In 10.1.3.x, I also used the external svn tools for doing lots of things like merging and so forth; in 11g, the support is much much better.
Best,
John

ERROR deploying PROCESS FLOW

I encountered the following error while deploying
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow
Database Link STG1@WB_LK_LOAD_STG. Please check that "EXECUTE ANY PROCEDURE" privilege
is set and that the OWB Runtime is available.
- ORA-06550: line 1, column 7:
PLS-00201: identifier 'WB_RTI_WORKFLOW_UTIL.INITIALIZE@STG1@WB_LK_LOAD_STG' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
I set the "EXECUTE ANY PROCEDURE privilege to runtime repository schema as well as
runtime repository user. I still get the same error.
Please find below the steps I followed
1) Process Flows -> Locations
Created Process flow location with ORacle Work Flow and 2.6.2
2) Process Flows
Created Process Flow module
Created Process Flow Package
Created Process
validated sucessfully
generated XML code successfully
3) Deployment manager
Register the Process flow location in owf_mgr/Owf_mgr successfully
pre-deployment is successful
when deploying I encountered the above error.
I want to execute the process flow from deployment manager itself.
Please help me in solving this problem. URGENT !!
Thanks in advance
Shree

Hi Jean-Pierre,
Thanks for your help,
Grant WHAT to OWF_MGR user?
I couldnt find the package named 'WB_RTI_WORKFLOW_UTIL'
in OWF_MGR but I cound find 'WB_RT_WORKFLOW_UTIL' package in it.
Is this some problem in my OWF_MGR schema?
Any help will be greatly appreciated,
Thanks,
Shree

Error during approval Process flow in Process controlled workflow

Similar Messages

Maybe you are looking for