Error during Asset Scrapping using ABAVN - plz advise
Dear all,
Facing an error during asset scrapping using ABAVN for a Korean company code.
Net value of asset is not zero. Transaction type = Disposal/abandonment of prev. year acquisition.
Error occurs on Simulation - Transaction in area 40 contradicts the net book value rule
NBV in area 01 Book Dep - 108,612,225 KRW
NBV in area 40 u2013 Tax Dep u2013 108,612,192 KRW
Negative vals allowed NOT checked in asset master.
SAP says:
The document cannot be posted, as it is contrary to the net book value rule which is checked in area 40.
This error usually occurs when you enter proportional values. The proportional values exceed the amount posted, for example, post capitalization of 100 but proportional depreciation to the amount 110. Check your entries and correct them if necessary.
How do we correct this issue and scrap the asset? Is this specific to Korea? How can we make NBV in area 01 = area 40?
Any clues? Greatful for all answers
Cheers
RK
Kindly read the forum rules and then post.
SMS Language is strictly not allowed.
Similar Messages
-
Errored during request submission using request see APIs
Hi guys, this error is giving me when i call a concurrent program and do a request sumission and the request status is red(error) with the next error:
"Errored during request submission using request see APIs "
Im using forms 6i and EBSHi,
I am getting the exact same error.
It appears when we run request sets!
We have made a trigger that sends an email to our sysadmins every time a concurrent request fails. This trigger fires on insert or update of applsys.fnd_concurrent_requests when new.status_code = 'E' /*Error*/ and new.phase_code ; = 'C' /*Complete*/.
In other words we should only get a message when the request has the status Error and is Complete.
However for request sets we get an email saying that it has failed with the following message "Errored during request submission using request see APIs". BUT, when we query the request in the Application, it has the status Normal! This applies to several different request sets.
So, my question is: Does anyone know if, or why, the standard request submission of request sets updates the status to Error for a short time, and then updates it to Normal afterwards?
Thanks
Roy -
Error during ecc6.0 installation ..plz help asap
Hi all
i am installing ecc 6.0 on windows 2003 standard 64 bit
with database ibm db2 version 9
i am getting the following error during the installation phase
error during abap import phase
i am attaching error log files
import.monitor.log
===============================================================
INFO: 2007-05-03 22:17:51
Import Monitor is started.
CONFIG: 2007-05-03 22:17:51
Application options:
dbCodepage=1100
dbType=DB6
extFiles=no
importDirs=E:\idesins\51032413\1of6\EXP1;E:\idesins\51032413\2of6\EXP2;E:\idesins\51032413\3of6\EXP3;E:\idesins\51032413\4of6\EXP4;E:\idesins\51032413\5of6\EXP5;E:\idesins\51032413\6of6\EXP6;E:\idesins\51032413\6of6\EXP7;E:\idesins\51032413\6of6\EXP8;E:\idesins\51032413\6of6\EXP9;E:\idesins\51032413\6of6\EXP10;E:\idesins\51032413\6of6\EXP11
installDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS
jobNum=3
loadArgs= -stop_on_error -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-05-03 22:17:51
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-05-03 22:17:51
List of packages with views: 'SAPVIEW'.
TRACE: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is started.
INFO: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2007-05-03 22:17:51
Data codepage 4103 is determined using TOC file 'E:\idesins\51032413\1of6\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
INFO: 2007-05-03 22:17:53
Version table 'SVERS' is found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-05-03 22:17:53
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -ctf I E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL" SAPSDIC.TSK DB6 -l SAPSDIC.log
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
ERROR: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-05-03 22:18:21
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-05-03 22:18:21
1 error(s) during processing of packages.
INFO: 2007-05-03 22:18:21
Import Monitor is stopped.
=============================================================
import.monitor.java.log
======
java version "1.4.2_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_14-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_14-b05, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
=========================
sapsdic.log
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: version R7.00/V1.4
Compiled Aug 31 2006 22:40:33
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
(CREATE TABLE "/SDF/PAT03" ( "PATCH" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "SHORT_TEXT" SAPDB6VARCHAR(60) DEFAULT ' ' NOT NULL , "STATUS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "DELIV_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "DELIV_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "RESPONSIBL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IMPLE_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "IMPLE_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "L_IMPL_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "CONFLICTS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "CONFIRMED" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "BACKUP" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "FROM_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "TO_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "OS" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "DB" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "PATCH_TYPE" SAPDB6VARCHAR(3) DEFAULT ' ' NOT NULL , "ANCESTOR" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "STRICT_SEQ" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "NO_GEN" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "SPAMFIX" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "ADDON_ID" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "ADDON_REL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IGN_CONFLI" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "AP_ANCEST" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "EPSFILSIZ" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "HI_ANCEST" SAPDB6VARCHAR(2) DEFAULT ' ' NOT NULL , "COMP_REL" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "COMPONENT" SAPDB6VARCHAR(30) DEFAULT ' ' NOT NULL ) IN IDE#DDICD INDEX IN IDE#DDICI LONG IN IDE#DDICD)
DbSlExecute: rc = 102
(SQL error -601)
error message returned by DbSl:
SQL0601N The name of the object to be created is identical to the existing name "SAPIDE./SDF/PAT03" of type "TABLE". SQLSTATE=42710
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: END OF LOG: 20070503221753
=============================================
any help will be much appreciated.
thanks.
Message was edited by:
Abdul Wahid KhanHi,
Restart the installation from the begining
Regards
Umesh K -
Error during asset transfer: No depr areas for receiving revenue
Hi....
when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error.
Thanks
SatyaHi....
I am posting the transfer from with revenue details as NBV from depr area 01, and using the transfer variant as 2 [Net Method]. Still it gives the same error.
I then try posting a manual revenue and again it shows the same error.
Finally, I use No revenue option, and it accepts. do not why this is happening?
Kindly help.
Thanks -
Error When Starting the Portal Server - Plz Advise
Hi..
I want to start the Portal Server.
so, i followed the steps..
up the listener,dcm,emctl..
but, when i open the Em from browser
"http://<host>:1810/
It stated that some component did'nt start..
So, i clicked Start All button..
it gaves me this erorr...
Plz Advise..
Tq
oracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionjava.lang.NullPointerExceptionjava.lang.NoClassDefFoundError"scanzano,
I was wondering if you ever received and answer to this question, becuase I am faced with the same problem when I attempt a signon to the 'admin server' I receive the following message:
type Status report
message Invalid direct reference to form login page
description The request sent by the client was syntactically incorrect (Invalid direct reference to form login page).
This is displayed as an "HTTP Status 400 - Invalid direct reference to form login page!!??" It appears that this message has been around for a while so I'm wondering if this issue will ever get resolved?? -
Error during password reset using self-service portal
I am working in a poc (proof of concept) using oim with ad, exchange, sap and database application tables connectors. During some tests I noticed that password reset through oim's self-service portal works fine for ad, exchange and sap, but it fires an error for the database application tables connector. The odd part is that i can change the user password using web console as xelsysadmin nicely. Also I can change the password when i retried the failed task.
Any help is appreciated.
I'm running OIM 9.1.0.2 with BP05 applied, Weblogic Server 10.3.2, Oracle Database 11.0.7. The OS is Windows 2003.
Log from oim web console
Resource Name: SOC_GTC
Description:
User: poc cassi17 [POC.CASSI17]
Status: Rejected
Response: OIM API Error
Response Description: An error was encountered in the Oracle Identity Manager API layer.
Notes:
wnqAd8gmdAhODUFjs4WMyQ==
Assigned to Group : SYSTEM ADMINISTRATORS
Log from Weblogic sdout
ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],
java.lang.NullPointerException
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy59.changeCredForSelf(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],An exception occurred while creating the GenericConenctor Model from the Connector Definition file
ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'
com.thortech.xl.gc.exception.ConnectorDefinitionOperationsException: An exception occurred while creating the GenericConenctor Model from the Connector Definition file
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy59.changeCredForSelf(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
... 92 more
Edited by: aviana on Feb 23, 2010 5:18 AMI changed the privileges as recommended, but it did no solved the problem. So I implemented the task retry as a workaround and it worked.
Anyway, I increased the adapter's log level to debug. Please check the log below.
ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],
java.lang.NullPointerException
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy59.changeCredForSelf(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],An exception occurred while creating the GenericConenctor Model from the Connector Definition file
ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'
com.thortech.xl.gc.exception.ConnectorDefinitionOperationsException: An exception occurred while creating the GenericConenctor Model from the Connector Definition file
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy59.changeCredForSelf(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
... 91 more
***ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.GC.FRAMEWORKPROVISIONING],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal entered.***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString entered.***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: class - Value: java.lang.String***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: poRetVal.toString() - Value: GCPROV.ADAPTER_OIMAPIERROR***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: Returning:sRetVal - Value: GCPROV.ADAPTER_OIMAPIERROR***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString left.***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal - Data: Setting Adapter Return Value to GCPROV.ADAPTER_OIMAPIERROR - Value:***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal left.***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter entered.***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter - Data: Mapped to Response Code - Value:***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpSOC_GTC***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value:***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value: GCPROV.ADAPTER_OIMAPIERROR***
***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value:***
***DEBUG,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem left.***
***DEBUG,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter left.***
***INFO,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Adapter: adpSOC_GTC has completed for the task: SENHA Updated.***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateDataSetValuePost left.***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateProcessFormFieldValue left.***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateProcessFormFieldValue left.***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter - Data: No Response Code specified. Updating milestone status to Completed - Value:***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpSOCSETNEWSENHA***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value: C***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value:***
***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value:***
***DEBUG,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem left.***
***DEBUG,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter left.***
***INFO,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Adapter: adpSOCSETNEWSENHA has completed for the task: Change User Password.***
***INFO,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Event: Triggering Processes related to User. has completed.***
Edited by: aviana on Feb 23, 2010 3:02 PM -
Error during Excise reversal using J1IEX
I am trying to reverse the exicise document posted using J1IEX and i am getting an error "Document status in process, complete the document.".
I am following the follwoing process:
1. Cancelling the PART 1 using MIGO, here i am picking the option of refer the excise invoice and posting the document.
2. In J1IEX i am capturing the excise invoice and posting the same. Part 2 getting updated correctly and the status is posted.
Now i am doing the reversal.
1. I am cancelling the Part 1 using MIGO
2. In J1IEX iam trying to post this document where i am not getting any error when i click check, it shows all in green and ready to be posted alos i am getting correct values during simulate cenvat. But when i click Post i am getting an error ""Document status in process, complete the document.".
Only once i post this i would be able to cancel the excise document to complete the reversal.
Please suggest where i would be going wrong.
Regards
GGLWHAT you captured that should be reversed, when you try to do reverse the ED. but if capture amount not reversed, you would have made wrong reverse entry. check your reverse entry. if could not solve, you should pass manual JV
-
Runtime Error during Asset Creation (AS01)
Hello Everyone !
I have been trying to CREATE ASSET for a long time but unfortunatly land up on ..... RUNTIME ERROR. I used all the possible ways to get it solved but i am stuck. Error analysis says The ASSERT Condition was violated.
Hope you guys would help me out and push my knowledge further. Answers would be highly appreciated.
SrinivasHi Srinivas
Please go through T-cd:ST22 and check the dump content first, especially, u2018Error analysisu2019, u2018How to correct the erroru2019 of the runtime error long text may give you some hints to solve the problem.
Regards
George -
I've tried everything-I still get error during rendering/encoding using iDVD
I have a iMac Intel core duo (2005) with OSX10.4.11 and iDVD vers.7.04, 2 gigs of RAM and 56Gigs of free HD space. I can't burn a 3 slide slideshow to DVD without getting rendering/encoding error. I can't save a Disk Image file nor a Video TS folder. I have tried deleting the iDVDplaylist to trash. I have repaired permissions from install DVD. I have also logged on as new user with same results. I've tried using different themes and I have also tried from scratch using Magic iDVD. The built-in dvd burner works fine with regular files so I am confidant it works OK. This is the first time I have used iDVD and all slides are from the media pane and there are no errors in map view. Can anybody help!!!!
Hi
Did You in iDVD - Turn on TV-Safe area ?
Anything goes beyound this - OR EVEN Touching IT ! ? - It must not.
Titles and Chapter names (on menus) - Only A to Z and 0 to 9 - NO OTHER letters as : - ; . etc.
Yours Bengt W -
Error during Goods Issue using movement type U61
Dear All,
There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
Any guidance or help is welcome
Regards
Balaji.JHi,
The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
Regards
Balaji.J -
Ideatab a3000 dead after error during firmware upgrade using flash tool
i was upgrading to firmware version 4.2.2 with call option then i got an error message and the tablet is dead
any so;utionsDear uliwooly,
I have tried in different PC, different version of flastool and different .tft file but all are failed!
One thing i should share:
My phone can connect to flash-mode without pressing volume down key!
Plz reply.... -
"Resource Busy" error during image creation,using disk utility when booting up from installation DVD
Hi all, first post to this community, wish all well
I have a MBP which is more than three years old, installed with OSX Leopard 10.6. Recently the MBP failed to to start and I tried to follow some articles online, including some from this community, to repair my disk, and more importantly, to backup data on the startup disk. But it does not work quite well so I try to seek some help here.
What I have done is to bootup with the installation DVD, try to verify and repair the disk using disk utility, which tells me it can't repair and recommend to backup, erase and reinstall. Am fine with this recommendation but now the problem is on the backup part. There are two partitons on this 500GB hitachi SATA disk. One is 300G which is for OSX itself, and the other 200G was partitioned for Time Machine. The repair failure is on the OSX partition which contains most of the recent data that I want to backup/restore. And unfortunately the Time Machine backup was stopped about two month ago, for some stupid decision I have made , while I am hoping to recover some data for the past month.
Currently the SMART status of the whole disk is verified, the OSX partition is unmounted with no details in the Available, Used, Number of Files, etc. From what I have researched (correct me if I am wrong), I highlight the OSX partition from the list on the left, click 'New Image' button on top, and select the destination to try to create an image of the current partition. But regardless of my desintation (Time Machine partition, or external USB drive), the imaging process always failed with Resource Busy error. Some online search suggest that the partition must be in unmount status but seems it does not apply to this case.
Would be really appreciated if anyone can give me some advice on what's the 'resource busy' error mean, how to backup the OSX partition, or what are the other possible alternatives.Very poor idea to keep the Time Machine backup file on the internal hard drive. They should always be put on an external drive. As when the internal fails you lose everything. Which is what I suspect has happened.
More then likely your internal drive is failing. the only options to get a new internal drive and a SATA to USB adapter. Install the new drive inside the system abd install OS X on it. Then once that is finished and you are booting from it connect the old drive to the system with the SATA to USB adapter and copy your files off the old drive. That is if you can. -
Error during AddOn Creation using Xcelius AddOn Packager ver 2.1
Hi,
I get the following error when I try to build my add on usng the addon manager. Does anyone has a solution for this?
Regards,
bala.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at Packager.Util.OpenArchive(String filename, Int32 mode)
at Packager.Package.generateXLX(String filename)
at Packager.MainForm.buildToolStripButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
Packager
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/Business%20Objects/Xcelsius/SDK/Packager.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.Hi,
I get the following error when I try to build my add on usng the addon manager. Does anyone has a solution for this?
Regards,
bala.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at Packager.Util.OpenArchive(String filename, Int32 mode)
at Packager.Package.generateXLX(String filename)
at Packager.MainForm.buildToolStripButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ToolStrip.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
Packager
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files%20(x86)/Business%20Objects/Xcelsius/SDK/Packager.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box. -
Error during runtime when using BULK collect
Hi
CREATE OR REPLACE TYPE VAR_ROW AS OBJECT
VAR_1 VARCHAR2(20),
VAR_2 VARCHAR2(20)
CREATE OR REPLACE TYPE V_TAB AS table of VAR_ROW
CREATE OR REPLACE FUNCTION get_id RETURN var_tbl
PIPELINED AS
/* declaration */
i INTEGER;
--TYPE x_t IS TABLE OF VAR_ROW;
x_t V_TAB;
c_wip sys_refCursor;
BEGIN
c_wip := getTable('abc'); --the result return: 10 rows with 2 columns.
LOOP
FETCH c_wip BULK COLLECT
INTO x_t LIMIT 20; <-- error seems to come from this line
FOR i IN x_t.FIRST .. x_t.LAST LOOP
PIPE ROW(x_t(i).VAR_1);
--PIPE ROW(x(i).VAR_1);
END LOOP;
exit when c_wip%NOTFOUND;
end loop;
RETURN;
END;
SELECT *
FROM TABLE(get_id)
Error msg: ORA-00932:inconsistent datatypes:expected UDT got CHARWhat could be the cause of the error?In addition, if your cursor returns two separate columns, you'll have to call an appropriate object constructor to create a VAR_ROW object from the two columns. The easiest solution would be to do this in your getTable method. Where you have
SELECT column1, column2in getTable today, you'd want
SELECT var_row( column1, column2 )Otherwise, Oracle cannot construct the VAR_ROW object from the cursor, so you cannot bulk collect it into an array of VAR_ROW.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Error message while scrapping the asset ABAVN
Hi Gurus
We are trying to scrap an asset which has 0 value.
This was transfered from onother asset 5000084 15 years back with 0 value.
Now when we tried to scrap using Tcode: ANAVN following is the error message we are getting.
==================================================================================================
Partial retirement or transfer of prior-yr acquis. not possible
Message no. AA378
Diagnosis
You tried to post a retirement or transfer, based on quantity or percentage, to asset acquisitions from prior years on asset 5000084 0. However, the system could not find any values.
Procedure
Post the retirement using a transaction type for current-year acquisitions, if the asset has values at all. If the asset does not have any values, you can only post a complete retirement. You cannot post a transfer.
===================================================================================================
Now we dont have asset details of 5000084 as it is archived.
Let us know how to resolved this issue.
Thanks in advance
SAP onlyHello
Since Asset has zero value , I presume you are scrapping it or retiring it because you dont want it to appear in your asset register.
Simply deactivate the asset instead of scrapping it. You can also delete if the asset value is zero.
Let me know if this helps you
Thanks
Sanjeev
Maybe you are looking for
-
How to install CMS database on Sql Server
Hi Now I am installing Crystal Reports Server 2008, current environment is windows server 2003 + Sql Server 2005. During the installing, because I want to use Sql Server 2005, so I picked "use a existing database server", however when I get into "sel
-
One of the staff in singapore, Plaza singapura, told me there is no silicon skin for 60gb. Is it true? Can 30gb skin fit 60gb?
-
BAPI or FM for Condition Pricing
Hi All I need to develop a report that shows all the condition pricing (SD). It is necessary to show the same fields of the pricing screen (VA03) - it would be a kind of simulation. I would like some function that gives me a report similar to the sc
-
I have created a bpel database polling process to process a single table and use a logical update (mark a column as processed). The table will contain many unprocessed records at any time. I have setup the polling interval 5 Sec and records unlimited
-
Can't preview "yellow bar" stuff
I'll make this as simple as possible. When I have a clip that won't play back in realtime, Premiere often marks it with a yellow bar, indicating a belief that it can render the clip on the fly. Here's the problem: - This belief is commonly mistaken.