Error during assignment of plant to company code
hi all,
i am using sap r/3 4.7.
I defined a plant 1000. then i am trying to assign it to company code 1000 (created by copying it from company code 0001).
when i tried to assign plant 1000 to company code 1000 it is giving error as..
"enter numeric values only"...
the message i received is...
Message no. TK455
Diagnosis
The value " " was entered in the field "LNUMBER".
This is not possible because it is a numeric field where only numbers may be entered.
The length of the field is 000004.
System Response
The entry was not accepted.
Procedure
Enter only numeric values in this field.
field number "LNUMBER" is a data element of table " UMODREL" (package- SUMO). it contains one entry and that is 0001 for field number LNUMBER. there is no difference to the error if i delete that entry or if i make changes to that entry.
rest all assignments are completed without any problem.
someone told me to check SAP Note 547875.
i am a learner and does not have access to service.sap.com.
if some one can give me username and password of that site i might find some solution there. (as well as support packages)
waiting for positive response....
Here is the note; You have to implement the suppost pack SAPKH47026
check in your system that you are up to what support pack
to chech that go to system-status-click on the mangifying glass
this will open component information popup
here you can see the support pack detail for SAP_APPL version 4.7
Symptom
When you use Transaction EC01 to delete or copy a company code delivered by SAP, the system issues error message TK455.
Other terms
TNIW5, V_NIW5, TK455, EC01
Reason and Prerequisites
The problem is caused by an error in Customizing.
The TNIW5 Customizing table is a table with delivery class = C (= Maintenance only by customers - No SAP import). SAP has delivered entries in the TNIW5 table from earlier releases in the incorrect format (entries with the field contents '12') for the TNIW5-REICHWEITE field.
Solution
Use Transaction SE16 to delete all entries in the TNIW5 table that have the two-digit contents '12' in the 'Range of coverage' field.
If you want to use the lowest value determination by range of coverage (Transaction MRN1) with valuation level = company code, you can maintain your own customer-specific Customizing entries in Transaction OMW5.
Header Data
Release Status: Released for Customer
Released on: 25.04.2005 10:09:21
Priority: Correction with medium priority
Category: Customizing
Primary Component: MM-IM-VP Balance Sheet Valuation Procedures
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 46C 46C 46C
SAP_APPL 470 470 470
SAP_APPL 500 500 500
SAP_APPL 600 600 600
Correction delivered in Support Package
Support
Packages Release Package
Name
SAP_APPL 46C SAPKH46C52
SAP_APPL 470 SAPKH47026
Similar Messages
-
ABAP runtime errors during customer extension to other company code
Hi,
I have created one customer in company code 1111 with tcode XD01.
When i am trying to create the same customer in the other company codes 2222,3333, and 4444, with tcode FD15, system is giving runtime errors like below.
The following syntax error occurred in the program RFBIDE20
"Field "BSZA1_D0100-MOB_NUMBER" is unknown. It is neither in one of the"
Error in ABAP application program.
The current ABAP program "RFBIDE10" had to be terminated because one of the
statements could not be executed
*This is probably due to an error in the ABAP program *
Could anyone help me out in this regard.
Thanks,
Srinu.Hi
Check SAP Note - 757821
Thank You, -
Why I can not find my CoCd(Company code) when I Assign plant to company cod
Hi All,
In SPRO.
I have defined my company in /Enterprise Structure/Definition/Financial Accounting/Define company.
When I try to Assign plant to company code(/Enterprise Structure/Assignment/Logistics-General/Assign plant to company code). It reports my company code is not existing.
Can someone tell me what's wrong. have I missed sth?
Thanks and regards,
Samson ZhuPlant will be copied Logistics->general -> Define, delete, copy check plant
after defining and copying then you can assign this plant to company code as you specified.
I think this will solve ur problem.
Regards
Ravi -
Plant and company code assignment in Ecc 6.0
Hi,
In 4.7 and ecc5.0 version we can assign only one company code for one plant but we can assign multiple plants to one company code. but in ecc 6.0 we can assign multiple company codes to one plant. what is the main use to maintiang multiple comapny codes for one plant. in which senario this function will work.Hi Meher,
Let's not take the sentence "plants can be assigned to different company codes" out of its context.
http://help.sap.com/saphelp_utilities472/helpdata/en/ff/515a4249d811d182b80000e829fbfe/frameset.htm
Golden rules in SAP Logistics:
A single plant is always assigned to one company code.
Several plants can be assigned to the same company code.
A single sales organization is always assigned to one company code.
Several sales organizations can be assigned to the same company code.
In sales, IF the company code of the sales organization is different from the company code of the delivering plant, then SAP will automatically recognize an intercompany sales process.
If the sales organization and plant are assigned to different company codes, an internal billing document is sent between the company codes before the sales transactions are entered for accounting purposes.
These "golden rules" did not change in ECC 6.0.!!!
Best Regards,
Franck -
Error message: CO account assigned to the wrong company code
Hello,
I've had the following error message in a report: "The CO account assignment object belongs to company code XXXX, not YYYY." What object is this? How can I change the assignment of the object to the company code? Which transactions should I use?
Please help me.
Thank you all,
TatianaHi,
CO assignment could be through cost centre, I/O, WBS, cost object etc. Check your document and go to the master data of the relevant object. Keep in mind, that if there are postings on the object done already, you cannot change the assignment to company code, but have to create a new object (or use another one in the document, of course).
Regards,
Eli -
Error in PPMOD feature while assigning functional area under company code.
Hi Experts,
I am getting error in PPMOD feature while assigning functional area under company code.
The error is " The total fields lengths of the decision operations are too great ".
Please advice.
Regards,
IFFHi IFF,
The return values which you have maintained for the decision parameter are not acceptable that's why it's throwing that error.
Your PPMOD feature is based on company code and functional area.
Try to maintain it as follows:
000010 D BUKRS
000020 1000 D FKBER
000030 1000 0001 &PPMOD=1,
000040 1000 **** &PPMOD=2,
000050 2000 &PPMOD=1,
000060 2100 &PPMOD=2,
000070 2900 &PPMOD=2,
000080 2910 &PPMOD=1,
000090 **** &PPMOD=2,
Please try to create this features value again using tree format, so that you can know the actual length of the return string and update the thread once done.
Edited by: pdk_hcm on Sep 6, 2011 2:30 PM -
Error In Transfer The CO account assignment object belongs to company code
Dear All,
When i am trying to transfer a employee from a personnel area to another personnel area, i am getting the following error.
The CO account assignment object belongs to company code 2000, not 2007
These personnel areas belong to two different company codes.
Pls suggest.
Kind Regards
NagHi,
Please check with the FICO consultant you have to give new CO assignemnt when you transfer EMPLOYEE to other companycode. i hope so
Vibin -
Error message: CO account assignment to the wrong company code
Hello,
I've had the following error message in a report: "The CO account assignment object belongs to company code XXXX, not YYYY." What object is this? How can I change the assignment of the object to the company code? Which transactions should I use?
Please help me.
Thank you all,
TatianaHI
i think the error message number KI100 if message is KI100 you can supress error message by using transaction code OBA5
if error message is different please let me know the error message number
Thanks & Regards
Phaneendra -
Msg K1100 'The CO account assignment object belongs to company code X,not Y
Hi,
Unable to create an accounting document for a Return order.
Message K1100 - Error:The CO account assignment object belongs to company code X,not Y
Company Code : X
Sales Org: X
Plant: P
Billing Date : IG ( Internal Credit Memo)
The above details are from the item level- Account Assignment tab-Profitabliity Segment.
Pl. let us know from which table these fields are picked.
Regards
Biju
Edited by: Biju Mercy on Jan 7, 2010 12:58 PMI believe the error message number is ki100 and not k1100 as indicated by you in which case, refer any of the following notes:-
a) 140503
b) 643700
c) 420778
d) 352261
e) 141224
thanks
G. Lakshmipathi -
The CO account assignment object belongs to company code PN10, not BN10
Hi All, Iu2019m getting the error u201CThe CO account assignment object belongs to company code PN10, not BN10" when trying to make a payment on an invoice that was created in company code BN10.
The error came about because, there was an exchange rate difference between the invoice value and the corresponding payment value (document currency is USD and the transaction I'm using to make payment is F-58).
Therefore when i try to make the payment, the SAP system detects the exchange rate difference and attempts to post it to the exchange rate difference account (421020050). In OKB9, the default cost center specified for G/L account (421020050) in BN10 is (B999010). Therefore when the payment is been done, the system posts the exchange rate difference to G/L account (421020050) and assigns the cost center (B999010).
However, upon trying to save the document, the system shows the message "Correct the marked line items" (the marked line item here is the exchange rate line item). Therefore, I double click the line item to drill down on it and see that everything seems fine. I then click the save button, on clicking it, the system shows the error "The CO account assignment object belongs to company code PN10, not BN10u201D.
When i double click the error to read a more comprehensive explanation of the error, its content are as displayed below:
The CO account assignment object belongs to company code PN10, not BN10
Message no. KI100
Diagnosis
You want to make a posting in company code BN10.
At the same time, a CO account assignment object was specified that is assigned to company code PN10.
This is account assignment object with object type CTR, and object key NIG1/A999010.
System Response
Company code validation is active for company code BN10:
All account assignment objects in one posting row must be assigned to the same company code.
Procedure
You can
u2022 Make an assignment to company code PN10.
u2022 Enter an account assignment object assigned to company code BN10.
u2022 Change the assignment of object NIG1/A999010 to company code PN10. In this case, you should note the document and edit it further after changing the assignment.
If the posting is to a balance sheet account (category 90), you may also decide whether to allow CO account assignment objects from other company codes. If this is the case, deactivate the error message with the IMG step Change message control (message ID "KI", message number 100).
You can set the following message types:
"-" Message is not sent
"W" Message is sent as a warning message
"E" Message is sent as an error message
Posting to cost elements of another category always results in the message appearing as an error message, whether it has been deactivated or not.
Execute "Change message control"
(NOTE: All cost centers that starts with u201CAu201D belong to company code PN10 and those that starts with u201CBu201D belong to company code BN10)
Kindly help with the resolution of this issue. Any resolution ideas would be greatly appreciated.
Moderator: Please, search SDNCheck the following OSS notes
1) Note 141224 - Error message KI100 for cross company
2) Note 202765 - KI100 during release of intercompany billing
thanks
G. Lakshmipathi -
The CO account assignment object belongs to company code 2100, not 1100
Hi All,
My system has all different company codes assigned to one cotrolling area as a result one can change org unit and position cost center from one company code to another.
I recently changed same position's cost center from co code 2000 to cost center in new co code 1100 and created new personnel area to be linked to new Co code 1100. OM module doesn't moan however when I try and capture org-reassignment action to default same employee postion with new related cost center from new company code 1100 get the follwing error.
'The CO account assignment object belongs to company code 2100, not 1100'.
I see in IT0001 system defaults new personnel area linked to Co code 1100 however it still defaults old cost center linked to Co code 2000 instead of new cost center linked to Co code1100. How can I make the system default new cost center?
NB relationship for new cost center from Co code 1100 to postion has been changed effective 01.04.2012 . The same date is used for or-reassignment action.Hi I had same problem can you explain me little bit more that how you will resolve this
-
"Account Assignment objects have differing company codes"
Hi,
We have parked the document through T.Code : MIR7 & now we want to post the same using the correct GL A/c.
When we try to post the document we are getting error like "Account Assignment Objects have differing Company Codes"
Can you please help me
Thanks
Ravi kumarPlease check in the document if it contains diferrent account assignments like both cost center and internal order. In this case both cost center and order must belong to same company code.
If you find the document fine, then solution is to change the error to warning using T Code OBA5 and application area KI (I assume). You should be seeing application area as part of your error message number which is usually first 2 characters.
Regards
Sreenivas -
Enterprise Structure -Sales Org to plant of company code
Hi,
My client wants Sales Org to be assigned to plant of different company code.
While doing configuration in our development system I got warning message that Sales Org,Distribution assigned to Plant is of different company code.
Do we have any procedure/ extra configuration required if Sales Org is assigned to plant of different company code?
Thanks in advance.
Regards,
Vengata RaghavanHi Raghavan,
A plant can be assigned to only one company code but to many combination of Sales Orgn and Dist Chnl. The combination of Sales Orgn and Dist Chnl could belong to a different company code.
The configuration you have done till now is correct just that the system warns the user with a message when we assign the plant to a sales orgn and dist chnl of a different company code.
Regards
NP -
CO account assignment object belongs to company code SE01, not DK01
Hi SAP Gurus,
I am posting one inter company billing document. Customer is from Denmark and material is supplied from Sweden Co Code. Our requirement is to update the cost center field for the intercompany code document SE01. I have done following customizing in order to update Cost center field for inter company billing document for CoCd SE01.
1. Create order reason - OVAU
2. Maintain default cost center for order reason in tranx OVF3
I am encountering following error while trying to release billing doucment for account.
Diagnosis
You want to make a posting in company code DK01.
At the same time, a CO account assignment object was
specified that is assigned to company code SE01.
This is account assignment object with object type CTR,
and object key CMAX/SE9001.
System Response
Company code validation is active for company code DK01:
All account assignment objects in one posting row must be
assigned to the same company code.
Procedure
You can
o Make an assignment to company code SE01.
o Enter an account assignment object assigned to company
code DK01.
o Change the assignment of object CMAX/SE9001 to company
code SE01. In this case, you should note the document
and edit it further after changing the assignment.
If the posting is to a balance sheet account (category 90),
you may also decide whether to allow CO account assignment
objects from other company codes. If this is the case,
deactivate the error message with the IMG step Change
message control (message ID "KI", message number 100).
You can set the following message types:
"-" Message is not sent
"W" Message is sent as a warning message
"E" Message is sent as an error message
Posting to cost elements of another category always results
in the message appearing as an error message, whether it
has been deactivated or not.
Execute "Change message control"
Please let me know if you face such a issue in past.
Regards,
SATVIR SINGH
Moderator: I trust, SAP explanation is quite sufficientHi Satvir
You have switched on Comp Code validation in OKKP... which means you can not post to CO objects of another company code...
Eg: If billing is from comp code A, the co object has to be from same comp code.... Try to use OKB9 and specify a default CO object for the GL account involved in the posting or specify a default Cost center in OVF3 pertainig to the other comp code
Regards
Ajay M -
BDC error CO assingnment object belong to company code A800 not A900
Hi,
I am getting BDC error 'CO assingnment object belong to company code A800 not A900'.
Please any one suggest the reason for this.
Thakns in advance.Hi,
you are processing a BDC-session for company code A900 with a CO-account assignment for comp. code A800 and your system does not allow cross-company code postings. Check the co-object and correct it.
Best regards, Christian
Maybe you are looking for
-
Hi abappers I am using the following code in my program. i m getting a syntax error that i do not understand? can any body help me out with this. Regards Narendiran Rathinavelu *& Report ZTEST_RECUPLOAD REPORT ZTEST_RECUPLOAD. *include bdcrecx1. *
-
Hello, We are implementing SAP PLM for a high-tech company which designs and manufactures mobile phones (ODM). Since we are new in PLM consulting and we are facing with some implementation difficulties, we are looking for some solutions here. Questio
-
I purchased a book from iTunes on my new MAC and can't figure out how to open it. Can anyone help me?
-
Free Download (Single of the week) not updated
Anyone have any ideas why (in the UK store at least) the free single hasn't been updated this week?
-
FTP problem. causing incorrect data transfer ?
I am trying to upload a php page the sends data to a hosted payment page. The payment centre who in this case is Barclaycard are saying when they test the page in there environment (that i emailed them) is sends all the correct data to their hosted p