ERROR DURING BDLS CONVERSION
Hi Markus and Friends,
We have done BDLS conversion on pre-production after system copy from the production, when we tried to BDLS conversion between the logical system say PRHCLNT200(which is Production ECC 5.0 System) to QRHCLNT200 (which is preprod ECC5.0 System) with Oracle 9.0.0.7 database and AIX 5.4.
Some of the tables got error like :
Table Name Field Name Number of Relevant Entries Number of Converted Entries
For the tables:
TBD05,TBD06,TBD20,TBD30 ===> Error in field of table . Manual correction required.
I checked those tables and related to distribution model settings (BD64)....
Please let me know to solve the issue.
Thanks in advance....
Regards,
SAM
Hi Kenny,
Thanks for your response..We ran it once again but the same issue , when i check the logs for the bdls it clearly shows that the above mentioed tables are with the icon of >>>> and it means we need to correct it manually.... but how to rectify it.
Please let me know what changes i need to do.
Cheers,
SAN
Similar Messages
-
Error during currency conversion and consistency check in a sales order
Hi Experts,
I am facing the below error in the sales order. The sales order is having so many items. The below error is coming for few items only. I have checked the currency exchange rates also. All are maintained properly.
Please advice me how to fix this error or which class,methods are responsible for checking the above details while saving the order.
Thanks,
SriHi Christophe,
FYI
Error during currency conversion frm &1 to &2 (date &3, ref. curr. &4)
Message Class - CRM_CUMULATED_I
Message No - 013
Error during currency conversion for &1 and &2
Message Class - CRM_CUMULATED_I
Message No - 008
Consistency check: Logical key does not match
Message Class - CRM_CUMULATED_I
Message No - 011
Thanks,
Sri -
Error during unicode conversion
Dear all,
we are facing one issue during unicode conversion. the code is as follows:
FIELD-SYMBOLS : <n> TYPE X,
<c> TYPE C.
DATA : a TYPE i.
DATA : x TYPE x.
MOVE <n> TO a.
a = a + 22.
MOVE a TO x.
ASSIGN x TO <c> CASTING TYPE c
and we are getting the following error:
ERROR : the length of "X" in bytes must be a multiple of the size of a Unicode character (regardless of the size of the unicode character
please guide on how this can be resolved in ECC.
Regards,
N.JainHi,
here is some code to do it:
FIELD-SYMBOLS : <n> TYPE x,
<c> TYPE c.
DATA : a TYPE i.
DATA : x TYPE x.
MOVE <n> TO a.
a = a + 22.
MOVE a TO x.
DATA:
buffer TYPE xstring,
conv TYPE REF TO cl_abap_conv_in_ce,
x_char.
buffer = x.
conv = cl_abap_conv_in_ce=>create(
encoding = 'NON-UNICODE'
input = buffer
CALL METHOD conv->read(
EXPORTING
n = 1
IMPORTING
data = x_char
ASSIGN x_char TO <c>.
Regards
Walter Habich
Edited by: Walter Habich on Jun 10, 2008 4:09 PM -
Error during Unicode Conversion at DDNTF table
Hello
We are doing a Unicode Conversion for our CRT systems. This system now
is a SAP CRM 7.0 SR1 ABAP.
We have performed preparatory steps (SPUMG, checks, updating R3load,
R3ldctl, R3szchk, dboralib, ...),
but when we start Import process we get an error in SAPSDIC package.
The error looks like:
*************************+
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable
for some databases
(EXP) INFO: table DDNTF will be exported with sorting
(RSCP) ERROR: 'DDNTF' in UMGCCTL: Guess has illegal value.
(RSCP) WARN: DDNTF: Missing in UMGSTAT,
ERROR in nametab conversion
conversion of nametab table 'DDNTF ':
rscpMCStartTab: rc = 128
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/CRT/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/CRT/SYS/exe/run/R3load: END OF LOG: 20091229193651
Any idea??
Thanks in advance
RegardsYes I executed this Report using Menu Tool Bar.
The first execution gave me some errors regarding some tables existing at database level but not in DDIC. We ignored this errrors because those tables are not important.
But the last try, we decided solve this inconsistencies deleteting those tables at database level, repeting report RADUCNT (in this case no errors appeared) and repeting the export with the same error..
Now, we have seen in Tabscript STATUS of SPUMG there are some errors regarding DDNTF inconsistency found at table control. Reason 4. But this reason means that faillback codepage missing at table control for this table. But as far I know, I can't fill failbak field for this kind of table...
So know I'm reseting SPUMG, and reestarting again..
But I don't understand what is the problem
In a few minutes I will you inform about results
Meanwhile is anybody have any suggestion or idea... please let me know
Thanks! -
SAPInst Export Error during Unicode Conversion
Hello,
I started SAPInst, to export the source instance (for unicode conversion).
During the export preparation phase, I get the following error (in SAPInst)
ERROR
CJS-00030: Assertion failed: in component: NW_getDBInfo step: fillContextat this point the dbtype has to be != ind
ERROR
MUT-03025 Caught ESAPinstException in Modulecall:
ESAPinstException: error text undefined
ERROR
FCO-00011 The step fillContext with step key
|NW_Prepare_Export| ind| ind | ind | ind |0 |0 |NW_GetSidromProfiles |ind |ind |ind |ind |2 |0 |NW-getDBInfo |ind |ind |ind |4 |0 | fillContext was executed with status ERROR
Please help me how to rectify this error.
Thanks,
HaleemHello,
I recently experienced this problem, and it seems that when executing this step the <sid>adm account needs to be defined to use C shell. If its already set up to use C shell, check the <sid>adm logon scripts to make sure all the environment variables are being set correctly.
Regards,
Brad -
Error during Unicode Conversion - Import
Hi,
I am doing a Unicode conversion, done with the system export, while doing the
import during the Import ABAP phase system is throwing the error with R3load.
R3load -testconnect fails with following error.
emalonsbx002:wuuadm 18% R3load -testconnect
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
R3load: START OF LOG: 20071113095228
R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
R3load: version R7.00/V1.4 [UNICODE]
Compiled Oct 20 2007 06:20:06
R3load -testconnect
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
(DB) ERROR: DbSlErrorMsg rc = 99
R3load: job finished with 1 error(s)
R3load: END OF LOG: 20071113095230
Please let me know if anybody have any idea on this.
Thanks in advance.Your database isn´t fully started yet (in shutdown or startup) - check your alert.log
Also see
Note 655240 - Composite SAP note: ORA-01033
Markus -
ORA-01722: invalid number - Error during implicit conversion (10g vls 11g)
I am facing oracle error for few SELECT queries in 11g which were working fine in 10g environment.
Oracle Version:
10g - 10.2.0.5.0
11g - 11.2.0.3.0
We are storing numeric values under CHAR or VARCHAR2 column in few tables. This is known design issue & it can't be changed for now.
I know this will work fine until all the data is numeric in those columns for respective table. Because by some reason, if any row got character value for that column then implicit string to number conversion will fail and this error can occur. But I have verified that there is no data issue.
But I can see difference in the execution plan! But not able to recognize the reason issue.
Any other pointers on why the queries are failing in 11g would be of great help..
Example SQL:
Note that table structure and data is same in both the environments.
View Definition -
CREATE OR REPLACE FORCE VIEW CIMSOS.LC_LOCATIONS
( COUNTRY_ID, PRODUCTID,
LANGUAGE_ID, LOCATION_NAME,
LOCATION_SHORT_NAME, TAG_ID, LOCATION_DEFINITION,
COMPOSITEKEY, GLOBAL_LOCATION_KEY,
CPRODUCTKEYID, CMODVERSION)
AS
SELECT
CCOUNTRY_ID AS COUNTRY_ID,
CPRODUCTID AS PRODUCTID,
CLANGUAGE_CODE AS LANGUAGE_ID,
CLOCATION_NAME AS LOCATION_NAME,
CLOCATION_SHORT_NAME AS LOCATION_SHORT_NAME,
CTAG_ID AS TAG_ID,
CLOCATION_DEFINITION AS LOCATION_DEFINITION,
CCOMPOSITEKEY AS COMPOSITEKEY,
CGLOBAL_LOCATION_KEY0 AS GLOBAL_LOCATION_KEY,
cproductkeyid,
cmodversion
FROM mct_35193, goldencopy
WHERE cproductkeyid = productkey
AND cmodversion = version
AND catalogid = 35193;Facing issue for SQL query based on above view:
** In 10g Env
SELECT * FROM LC_LOCATIONS WHERE productid = 75;
-- It executes successfully and provide required results.
Explain Plan:
SELECT STATEMENT ALL_ROWSCost: 12 Bytes: 416 Cardinality: 4
4 NESTED LOOPS Cost: 12 Bytes: 416 Cardinality: 4
1 INDEX RANGE SCAN INDEX CIMSOS.GOLDENCOPY_INDX1 Cost: 10 Bytes: 30,225 Cardinality: 2,015
3 TABLE ACCESS BY INDEX ROWID TABLE CIMSOS.MCT_35193 Cost: 1 Bytes: 89 Cardinality: 1
2 INDEX UNIQUE SCAN INDEX (UNIQUE) CIMSOS.XPK_MCT_34342 Cost: 0 Cardinality: 1 ** In 11g Env
SELECT * FROM LC_LOCATIONS WHERE productid = 75;
ORA-01722: invalid number
Explain Plan:
SELECT STATEMENT ALL_ROWSCost: 40 Bytes: 8,692 Cardinality: 82
3 NESTED LOOPS Cost: 40 Bytes: 8,692 Cardinality: 82
1 TABLE ACCESS FULL TABLE CIMSOS.MCT_35193 Cost: 22 Bytes: 819 Cardinality: 9
2 INDEX RANGE SCAN INDEX CIMSOS.GOLDENCOPY_INDX1 Cost: 2 Bytes: 135 Cardinality: 9
-- Executes when value is passed as character.
SELECT * FROM LC_LOCATIONS WHERE productid = '75';The problem doesn't appear to be related to the Oracle version, at least not directly. If your query plan does the string to number conversion before eliminating the rows that have non-numeric data, you'll get an error. If the query plan eliminates the rows that have non-numeric data before doing the conversion, the query will succeed. It is entirely possible that you'd get the "bad" plan in 10g or the "good" plan in 11g.
You can capture the query plans from your 10g database and move them over to the 11g database. Oracle has a nice white paper on upgrading from 10g to 11g that walks you through that process.
Of course, you really don't want to be dependent on the optimizer picking the "right" plan, you really want to fix the underlying data model issue.
Justin -
Error during Content conversion
Hi,
The scenario is file to file. Inbound and async. The encrypted data is coming from third party. we are decrypting it and doing the content conversion. Earlier there was only 1 node. now the requirement is that they will be sending the header also. now there are 2 nodes with children. earlier there was only 1 node with children and the data was processing successfully. now when I have added header the fields of the header are not getting the value. Like header has the fields like Number_of_records, sbm_system_date etc.. but the fields of the header are getting replaced by the fields of the other node. I have attached the screenshots for the same. let me know if you need any more information. The payload is like below
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_BillingData_SBM xmlns:ns="http://pspcl.com/xi/SBM/IF0043_BillingData_100">
- <BillingData_SBM>
<SUB_DIVISION_CODE>11</SUB_DIVISION_CODE>
<MRU>16/08/2014</MRU>
<Connected_Pole_INI_Number>11:26:09</Connected_Pole_INI_Number>
<NEIGHBOR_METER_NO>I0027G14_14082014112726.enc</NEIGHBOR_METER_NO>
<STREET_NAME>1</STREET_NAME>
<INSTALLATION>I0027G14</INSTALLATION>
</BillingData_SBM>
- <BillingData_SBM>
<SUB_DIVISION_CODE>4272</SUB_DIVISION_CODE>
<MRU>MR60BM</MRU>
<Connected_Pole_INI_Number>J-DP06-FL12-031-004_G-1-P07</Connected_Pole_INI_Number>
<NEIGHBOR_METER_NO />
<STREET_NAME />
<INSTALLATION>5000057583</INSTALLATION>
<MR_DOC_NO>200000001829984</MR_DOC_NO>
<SCHEDULED_MRDATE>25-04-2014</SCHEDULED_MRDATE>
<METER_NUMBER>10089749</METER_NUMBER>
<MANUFACTURER_SR_NO>3376181</MANUFACTURER_SR_NO>
<MANUFACTURER_NAME>Capital Meters</MANUFACTURER_NAME>
<CONTRACT_ACCOUNT_NUMBER>100106763</CONTRACT_ACCOUNT_NUMBER>
<CONSUMPTION_KWH>16430.000</CONSUMPTION_KWH>
<CONSUMPTION_KWAH>18256.000</CONSUMPTION_KWAH>Hi,
Thanks for the reply. I have used the parameters in FCC which I have posted above. are they correct?
I am not getting the desired result. There may be issue with the input file/Parameters.
I am getting the below result in which the header values are not coming.
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_BillingData_SBM xmlns:ns="http://pspcl.com/xi/SBM/IF0043_BillingData_100">
- <BillingData_SBM>
<SUB_DIVISION_CODE>4272</SUB_DIVISION_CODE>
<MRU>MR60BM</MRU>
<Connected_Pole_INI_Number>J-DP06-FL12-031-004_G-1-P07</Connected_Pole_INI_Number>
<NEIGHBOR_METER_NO />
<STREET_NAME />
<INSTALLATION>5000057583</INSTALLATION>
<MR_DOC_NO>200000001829984</MR_DOC_NO>
<SCHEDULED_MRDATE>25-04-2014</SCHEDULED_MRDATE>
<METER_NUMBER>10089749</METER_NUMBER>
<MANUFACTURER_SR_NO>3376181</MANUFACTURER_SR_NO>
<MANUFACTURER_NAME>Capital Meters</MANUFACTURER_NAME>
<CONTRACT_ACCOUNT_NUMBER>100106763</CONTRACT_ACCOUNT_NUMBER>
<CONSUMPTION_KWH>16430.000</CONSUMPTION_KWH>
<CONSUMPTION_KWAH>18256.000</CONSUMPTION_KWAH>
<CONSUMPTION_KVA>0.000</CONSUMPTION_KVA>
<CUR_METER_READING_KWH>0.000</CUR_METER_READING_KWH>
<CUR_METER_READING_KVA>0.000</CUR_METER_READING_KVA>
<CUR_METER_READING_KVAH>0.000</CUR_METER_READING_KVAH>
<CUR_METER_READING_DATE>13-08-2014</CUR_METER_READING_DATE>
<CUR_METER_READING_TIME>182427</CUR_METER_READING_TIME>
<CUR_METER_READER_NOTE>D</CUR_METER_READER_NOTE>
<PRV_METER_READING_KWH>19170.000</PRV_METER_READING_KWH>
<PRV_METER_READING_KVA>0.000</PRV_METER_READING_KVA>
<PRV_METER_READING_KWAH>0.000</PRV_METER_READING_KWAH>
<PRV_METER_READING_DATE>30-06-2011</PRV_METER_READING_DATE>
<PRV_METER_READING_TIME />
<PRV_METER_READER_NOTE />
<OCTROI_FLAG>Y</OCTROI_FLAG>
<SOP>95465.00</SOP>
<ED>7636.92</ED>
<OCTROI>1643.00</OCTROI>
<DSSF>4773.08</DSSF>
<SURCHARGE_LEIVED>0.00</SURCHARGE_LEIVED>
<SERVICE_RENT>0.00</SERVICE_RENT>
<METER_RENT>292.00</METER_RENT>
<SERVICE_CHARGE>0.00</SERVICE_CHARGE>
<MONTHLY_MIN_CHARGES>11638.20</MONTHLY_MIN_CHARGES>
<PF_SURCHARGE>0.00</PF_SURCHARGE>
<PF_INCENTIVE>0.00</PF_INCENTIVE>
<DEMAND_CHARGES>0.00</DEMAND_CHARGES>
<FIXEDCHARGES>0.00</FIXEDCHARGES>
<VOLTAGE_SURCHARGE>0.00</VOLTAGE_SURCHARGE>
<PEAKLOAD_EXEMPTION_CHARGES>0.00</PEAKLOAD_EXEMPTION_CHARGES>
<SUNDRY_CHARGES>0.00</SUNDRY_CHARGES>
<MISCELLANEOUS_CHARGES>0.00</MISCELLANEOUS_CHARGES>
<FUEL_ADJUSTMENT>0.00</FUEL_ADJUSTMENT>
<BILL_NUMBER>I002714H131824001</BILL_NUMBER>
<NO_OF_DAYS_BILLED>1141</NO_OF_DAYS_BILLED>
<BILL_CYCLE>2</BILL_CYCLE>
<BILL_DATE>28-08-2014</BILL_DATE>
<DUE_DATE>26-08-2014</DUE_DATE>
<BILL_TYPE>2</BILL_TYPE>
<PAYMENT_AMOUNT>0.00</PAYMENT_AMOUNT>
<PAYMENT_MODE />
<CHECK_NO />
<BANK_NAME />
<PAYMENT_ID />
<IFSC_CODE />
<MICRCODE />
<PAYMENT_DATE />
<PAYMENT_REMARK />
<TOT_BILLAMOUNT>109970.00</TOT_BILLAMOUNT>
<SBM_NUMBER>I0027G14</SBM_NUMBER>
<METER_READER_NAME>USER1</METER_READER_NAME>
<INHOUSE_OUTSOURCED_SBM>PSPCL</INHOUSE_OUTSOURCED_SBM>
<TransfromerCode />
<MCB_RENT>156.00</MCB_RENT>
<LPSC>9591.00</LPSC>
<TOT_AMT_DUE_DATE>119561.00</TOT_AMT_DUE_DATE>
<TOT_SOP_ED_OCT>109518.00</TOT_SOP_ED_OCT>
<KeyField>P</KeyField>
</BillingData_SBM>
- <BillingData_SBM>
<SUB_DIVISION_CODE>4272</SUB_DIVISION_CODE>
<MRU>MR60BM</MRU>
<Connected_Pole_INI_Number>J-DP06-FL12-031-004_G-1-P06</Connected_Pole_INI_Number>
<NEIGHBOR_METER_NO />
<STREET_NAME />
<INSTALLATION>5000057703</INSTALLATION>
<MR_DOC_NO>200000001830038</MR_DOC_NO>
<SCHEDULED_MRDATE>25-04-2014</SCHEDULED_MRDATE>
<METER_NUMBER>10089869</METER_NUMBER>
<MANUFACTURER_SR_NO>8</MANUFACTURER_SR_NO>
<MANUFACTURER_NAME>Saraf Industries</MANUFACTURER_NAME>
<CONTRACT_ACCOUNT_NUMBER>100106883</CONTRACT_ACCOUNT_NUMBER>
<CONSUMPTION_KWH>5429.000</CONSUMPTION_KWH>
<CONSUMPTION_KWAH>6032.000</CONSUMPTION_KWAH>
<CONSUMPTION_KVA>0.000</CONSUMPTION_KVA> -
Value error during type conversion (KONP-KBETR to packed nos).
Hi,
I am using TYPE KONP-KBETR whose data element is 'KBETR_KOND'. Its Length is 11 and decimal Places is 2.
Now I want to store this value in a variable with 3 decimal places.
For this I have taken a variable with type P.
Eg : DATA : VALUE2(7) type P decimals 3.
When I store the value of KONP-KBETR in var VALUE2, I get some confusing value.
For Eg: if KONP-KBETR = 300.00 and I pass this value to var VALUE2, then VALUE2 becomes 30.000.
Ideally VALUE2 should have been 300.000.
Can anybody tell why this is so and what needs to be done to get the correct value.?
Thanks.Hi Kumar,
TABLES KONP.
data: val1 TYPE KONP-KBETR value '300.00',
VALUE2(7) type P decimals 3.
value2 = val1.
write: val1,
value2.
the output of the above code, 300.00 300.000.
i didn't get any problem.. check it out once..
Ram -
Error occurred during character conversion in SXMB_MONI
Hello Experts,
Good Day!
I would like to seek your help here. When i used tcode SXMB_MONI to search for messages i get this error : Error occurred during character conversion.
So far no problem with the program. Its work for all other dates. Just for one particular day and specific time period, im geting this error.
Does anyone know what is this error means? Please reply..
Thanks for your help.
Looking forward for ur replies..Hi Presheela,
Basically this problem occurs when ur payload contains any special characters like '&' ,'>'...etc .So you have to take care of how to deal with these characters in XI.
Refer the following documentation:
How to Work with Character Encodings in Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Regards,
Vinod. -
Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
RaviHello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi. -
Received HTTP response code 500 : Error during conversion of XI message
hi
Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
01.09.2011 12:02:32 Information The message status was set to DLNG.
01.09.2011 12:02:32 Error SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
01.09.2011 12:02:32 Error Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
regards
sandeep
Edited by: pendyalas on Sep 1, 2011 12:20 PMI found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
i will try and see if it works.
AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
regards
sandeep -
Http-Status: 500 Error during conversion of XI message
i am getting this error, Could you please help us in resolving this
http-Status: 500 Error during conversion of XI message
Payload:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SAP:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000; expected value is 003
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Thnaks, ajayXML tag Main/@versionMajor has incorrect value 000; expected value is 003
as mentioned above @versionMajor is expecting 003 as the input....if it a DataType in XI then check if there is some restriction imposed on the above attribute.....if you are importing some XSD/wsdl then check if it has some restriction.......if the restriction is not needed then try removing it....so that versionMajor will accept all the values
Regards,
Abhishek. -
Received return code 500 ( Error during conversion of XI message )
Hello Experts,
I am configuring the WSRM for SD in SAP. I have only configured services CreditWorthinessQuery_Out and CreditWorthinessQuery_In on soamanager to carry out credit checks.
while i am creating sales order i am getting below error.
Received return code 500 ( Error during conversion of XI message )
In debug i checked the string of error it showed me below string :
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">#<SOAP:Hea
der>#</SOAP:Header>#<SOAP:Body>#<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.o
rg/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during c
onversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30
</faultactor><detail><SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.co
m/xi/XI/Message/30"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSE
R">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SA
P:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMess
age namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000;
expected value is 003##</SAP:Stack></SAP:Error></detail></SOAP:Fault>#</SOAP:Bo
dy>#</SOAP:Envelope>#
Does anyone have any idea about this? I am not integrating with PI/XI system.Hi
Can you check this out?
Transaction SXMB_ADM Integration Engine Configuration
For an application system you have to maintain the role of the business system as an application system. Set the corresponding Integration Server as an HTTP destination (for example, dest://INTEGRATION_SERVER). Create the destination in transaction SM59 and set the type to HTTP Connections to R/3 System. Test the connection by using the Connection Test button; you should get HTTP 500 u2013 Empty HTTP Request received, because no u201Ereal‟ XML document is sent during this test.
A HTTP return code 500 (Internal Server Error) is OK.
Regards
Pothana -
Decimal Conversion Error During Export
Hi All
We are migrating our production system from HP-UX to SOLARIS and Informix to Oracle.
During the export phase for the process SAPAPPL1 terminates with error :
DbSl Trace: Error in decimal conversion. Length: 5, Decimals: 0
(EXP) ERROR: DbSlExeRead: rc = 2, table "S011"
(SQL error 0)
error message returned by DbSl:
I am not able to get hold of it.
Kindly help, if someone has experience on the same.
Regards
RahulHi Rahul,
What is your kernel release? Please confirm that you are in latest kernel and using the latest version of R3load.
Regards,
Satyabrat
Maybe you are looking for
-
ITunes Freezing Everything on Windows 7 PC
Anyone have a solution for this issue? Here's the breakdown: iTunes istalled on PC purchased 48 hours ago. iTunes randomly freezes up Virues, etc checked - none present All updates present (as far as I can tell) Uninstall/Reinstall not helping CTRL-A
-
Configure Unplanned Delivery Cost Account
Hi Experts Please help me. I want to configure Unplanned Delivery Cost hit Price Diff. G/L account right now its hit Martial A/c. Please let me know where I can do that. Thanks & Regards, Hemant Maurya
-
How to use RelatedContent component with UCM 11g without Records Management
As the subject really... I have been playing around with UCM 11g and want to use the RelatedContent component in isolation of URM / Records management. Can I still do this, and is it supported. I have had a look at advanced component manager and also
-
WebDynpro ESS content pages with ECC6 backend blank while loading (hanging)
Hello all. I am implementing ESS on a newly installed NetWeaver 2004s SP10 Java Server with portal and existing ERP2005 / ECC6 backend. Whenever it comes to the concrete pages, e.g. own address or WhoIsWho, the pages remain blank while loading. The "
-
Reply to all shows only the To in the email not the CC's
When replying with a blackberry, we see the To and the CC. However, when we reply with the Iphone, we lose the CC. Is this normal ?