Error during burning process

I am using OS10.4.6
Powermac G5
Final Cut HD4.5
IDVD 5.0.1
I have made a 27 minute movie in Final cut....i cannot seem to burn it in IDVD no matter what. I have been using this full time for 4 yrs and have never had this issue.
I have tested other movies and they burn fine...i have tried throwing away all the render files and re-rendering the movie in final cut and then re-exporting it out. i have exported it out in 2 different ways...no matter what i do, I keep getting an error during the burning process that says
there was an ERROR in the burning process
which is leading me to believe that some file within my final cut project is corrupt or problematic.
i have worked on this thing for about 50 hours and cannot start over from scratch, Help!

dejavu! http://discussions.apple.com/thread.jspa?threadID=512852&tstart=0
Ashley- I know you're probably getting desperate but please don't duplicate post.
I'm not real familiar with iDVD but I know you have to export a QT movie from FCP and then burn that right? Your QT Movie, was it a self contained QT or a refernce Movie. If you have no idea what I just asked, when you exported it and you went to File>Export>QT Movie> did you select the box that says "make movie self-contained"?
If so then a corrupt file is a moot (sp?) point. Can you open the QT Movie and watch it successfully in QT?
If you CAN watch it in QT then your problem probably lies in iDVD.
Answer these questions for us and we'll take the next step to getting a DVD in your hands.

Similar Messages

  • ITunes errors during burn process?!?!?!

    This has happened to me several times and had been cured (or so i thought) by resetting the P-Ram or whatever it's called. I've done that twice and wasted 2 CD's which I bought from the Apple store, apparently that temporary fix no longer works. This is not to mention the other half of the pack I wasted on trying it the first time this happened. I get one of two error messages, either "The disc burning failed..etc" or "...failed to reach laser level for this media...etc" and frankly I think it's ridiculous that Apple goes months without releasing an update for something like this. Not everybody has tons of money to buy a new pack of CD's every time Apple's unreliable software screws up. If anybody else is experiencing this and has successfully cured it, even as a temporary fix, that'd be greatly appreciated. -Thanks
    MacBook 2.0ghz; iPod 20gb   Mac OS X (10.4.7)   Windows XP

    I looked up many solutions to the problem online but none seem to work. Mainly, I looked to remove iTunes completely via Control Panel but it wasn't there.
    Can you let us know what happens if you try installing iTunes again, please? In particular, if you get an error message, let us know what the error message says. (Precise text, please.)

  • "Errors Found During Burning Process"

    Hi,
    Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
    Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
    Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
    I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
    Any ideas?
    For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
    Appreciate any help you can give me.
    Neil

    Colleagues:
    Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
    Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
    Thanks!

  • Error found during burning process

    I am having a problem burning my iDVD project to disk. I'm using DVD-R disks. The message I get is "Errors found during burning process". The burning process seems to work correctly all the way through until it gets to the last step - "burning".

    There are lots of things that can cause problems burning to disk.
    I suggest that you save your project as a disk image (an option on the iDVD file menu) and see if that is successful. If it is successful, that would eliminate issues related to iDVD, encoding, and source material. After that, I would look to what brand of DVD you are using (Verbatim, Sony, Fuji, and Hp are oft recommended here), what burn speed (4x or lower is best), whether all iLife programs are up to date, whether you have any 3rd party or Quicktime plug-ins that might be interfering, whether you have sufficient hard disk space to burn (20 Gb is recommended, although 5GB would be absolute minimum).

  • DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

    Hi,
    SRM 7.0 contains 2 clients:
    Sender: 100 for EBP, logical system is CLNT100
    Receiver: 200 for SUS, logical system is CLNT200
    both the clients are connected through PI 7.0, logical system of PI is CLNT001.
    From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
    In PI also msg is processed.
    But in SUS200, it is showing below error msg:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Inbound Proxy
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
      <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
      <SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
      <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Pls help in resolving the same....
    tnx n rgds,
    balu

    Hi,
    How did you solve the issue? Can you please provide the solution.
    Thanks,
    -Devi Swain

  • Error during proxy processing

    Hi Experts,
    We have a web service hosted on PI and getting the Tax Jurisdiction values from Taxware via ECC(ECC has a TCP/IP connection to connect to Taxware system, From there ECC gets Taxjurisdiction Codes and gives back to PI).
    When we make a call to this Web service following Error response has been given. Please let us know what could be the reason.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Inbound Proxy
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
      <SAP:P1 />
      <SAP:P2>ZCL_GET_TAX_IN</SAP:P2>
      <SAP:P3>GET_TAX_JURISDICTION_SYNC</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error during proxy processing Message E TAX_TXJCD 110 cannot be processed in plugin mode HTTP</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Thanks,
    Sekhar.J

    Hi,
    We are using XI adapter. The same Web Service is working good in Development and Quality Enviroments, I am wondering why it is failing in Production Environement intermittently. And also in ECC we are using TCP/IP connection to fetch Tax Jurisdiction codes from TaxWare System. This TCP/IP connection was configured in SM59 of ECC. PI will make call to ECC and ECC will make call to TaxWare and returns the result back PI.
    Thanks,
    Sekhar.J

  • Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

    Hello,everyone!
    My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIProxy</SAP:Category>
    <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
    <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
    <SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
    <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Detialed error from SXMB_MONI,
    Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
    This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
    I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
    Regards,
    Baskaran K

    HI,
    This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
    We have one more error message
    <FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
    Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
    Regards,
    Baskaran K

  • Error during Proxy Processing from ECC system

    Hi All,
    I had created Webservice  using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
    "An error has occurred. Maybe the request is not accepted by the server: "
    "Error during proxy processing"
    Request
    POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
    Host: rpmsap3.rapidigm.com:8080
    Content-Type: text/xml
    Connection: close
    authorization: <value is hidden>
    Content-Length: 389
    SOAPAction: ""
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
    Response
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
    set-cookie: sap-usercontext=sap-client=100; path=/
    content-type: text/xml; charset=utf-8
    content-length: 270
    sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
    server: SAP Web Application Server (1.0;640)
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
    Appreciate any help on above issue
    Regards
    Manish Mundra

    Hi All,
    Please help on below issue.
    Thanks in Advance
    Regards
    Manish

  • Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

    Hi All,
    I am facing the following problem in production server when even the file got processed successfully .
    Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
    Can you please suggest how it can be handled?
    Regards,
    Saras

    You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
    Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
    VJ

  • Error in burning process

    I've burned my DVDs before, but this time it won't finish the burning. It says there was an error during the burning process before it's about to finish. I have 30 GB free on my HD, 1GB RAM, and a black Macbook. The other posts I saw on this topic had to do with upgrading Quicktime I think and I don't think that's the problem with mine since I bought it a little while ago and as far as I know, Quicktime hasn't been updated since August. (Except for the software updates, which I'm all up to date with)
    Also, after it gives me the message iDVD won't close out. I have to manually hold the power button down to shut off to get it functioning again.
    Any suggestions? Thanks for reading
    EDIT: I posted this in the wrong forum earlier, and am now posting in the right place and I got the error # it's -34502

    I searched the forum for the error message and found this
    http://docs.info.apple.com/article.html?artnum=303148
    it solved my problem.

  • IDVD encoding causes system failure during burn process

    I have iDVD 5 on my work computer (dual 2.7Ghz G5 / 2.5 G RAM), and have burned successfully before my current project.
    My current project has a 28:45 movie and I have tried two different themes with different combinations of drop zones (one with the movie as the drop zone and one with stills only) and everything previews okay, but when I start the burn process it will get to a certain point in the encoding and then the whole system crashes. I come back to check on the process, and my screen is filled with black squares with error info in it... (looks like a DOS screen or something) and it says something about system failure and that I need to restart my computer.
    I'm so stubborn that I keep trying different combinations of possibilities but I'm having no luck. The movie that it's hangin up on was captured in Final Cut Pro from a VHS, edited in Final Cut to trim the excess black, and exported as a Final Cut Movie that I imported into iDVD.
    As I said above, I have burned successfully on this computer and this iDVD, so the fact that this one project refuses to burn is perplexing.
    any thoughts?

    A gap in video would be a space between one clip and another. This is a problem when you are editing your footage, not capturing it. In other words, it is a user introduced problem.
    In FCP when you say "Ignore Timecode Breaks" it just means to continue capturing video even if there is a timecode break. If you do not select this option, FCP would immediately stop catpturing whenever it hit a timecode break. A timecode break is not the same thing as a gap you create during editing. A timecode break could be as simple as rewinding your camera footage and then recording over it... the timecode now has a break because it is not continuous timecode, it jumps from one timecode to another.
    Depending on what device you are capturing from, your audio may come in a few frames before or after the video. This would be especially true for a non-controllable device. It is a simple fix to adjust this as you would have noticed any sync issues right in the timeline during playback.
    A system reboot in the middle of encoding is a serious crash... I doubt if it is the footage per se that is causing this to happen. Footage has been known to force an application to abort a process (or stay in an infinite loop), but an actual system shutdown would be extremely rare.
    Consider recapturing the footage into a new FCP project and then creating a new iDVD project for it, this will eliminate either a corrupted FCP file or an iDVD project from the equation. Also, are you burning directly to disc or are you preparing a disc image? I'd go with the disc image approach because you can test your final build that way.

  • TS2180 Need a resolution for multiplexor error during burns?

    Need a solution for Multiplexor Errors during  iDVD disc burning process?

    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev. (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

  • Error during propagation process in streaming

    I am getting following error during propagation
         ORA-12170: TNS:Connect timeout occurred ORA-12170: TNS:Connect timeout occurred
    In order to resolve this i add following lines in sqlnet.ora on both nodes, but problem is still there....
    SQLNET.SEND_TIMEOUT=300
    SQLNET.RECV_TIMEOUT=300
    SQLNET.INBOUND_CONNECT_TIMEOUT=300
    SQLNET.DEFAULT_SDU_SIZE=32767
    SQLNET.RECV_BUFF_SIZE=655336
    SQLNET.SEND_BUF_SIZE=65536Need your help in resolving this issue........

    Hi,
    What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
    Regards,
    Masa

  • Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

    HI..
    I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
    Here is the error:
    Error
        opmnctl task failed
        Step Executing: opmnctl start coreapplication_obisch1 failed
        Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
    any help would be great
    thanks..

    Friend,
    Installer file size is:
    Size: *1.23 GB (1,323,085,837 bytes).*
    Size on disk: *1.23 GB (1,323,089,920 bytes).*
    I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
    Some additional recommendations to solve this case.
    Thank you for supporting.
    Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

  • Error during the Process of Netting - No Identifier Found TPM_TRG136

    Hi All
    During the process of doing Netting , the system is popping up an error message as - No Identifier found. The message error is TPM_TRG136.
    Can anybody suggest the solution for the error.
    Ram K

    Hi @artem98765,
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that when you tried to do a recovery back to factory you received the error incomplete recovery.
    As you did not state if how you were doing the recovery I will include documentation for the process along with a troubleshooting document.
    HP PCs - Performing an HP system recovery (Windows 8)
    HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)
    If you are still unable to complete the recovery please contact HP support for further assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for