Error during Business Content Installation of a query

Hi,
I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
Any help on the above problem would be appreciated.
Thanks & Regards,
Raj

Hi Raj,
Is the request creation for a BEx transport is different from the normal request creation??
Yes, Handling of changes to already transported Queries is different to other things of BW.
Refer :
http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Re: Not able to Change or delete Query
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Similar Messages

Different Problems during Business Content Installation in BI 7.0

HI GURUs,
          I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
Question 1:
          Let's say when I'm trying to install 0MATERIAL infoobject
Scenario 1:
( with Necessary Objects as Grouping), the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
Scenario 2:
(_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
Note: The Figures are found in the file attached with this link.........
           [Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
Question 2:
         Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
Note: It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
       Hoping for a early optimistic solution.
Regards,
Syed Shujaath Ali.

Hi,
Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
It will sove your issue.

Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube 0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Short Dump during Business Content Installation

Hi Gurus,
       I'm working on SAP BI 7.0. I'm getting a Short Dump Error stating " Program error: ASSIGN with length 0 in program "SAPLSNR3". " while I'm try to install the Business Content.
      I'm getting this error when I'm trying to install Business Content with Grouping Option " Data flow Before ", but I didn't face any problem when I started off with the Grouping Option " Only Necessary Objects ".
     I tried analysing this problem by going to ST22 transaction & during my analysis I found that in the said program " SAPLSNR3 ", there's LSNR3F01 include in which line number 178 is having a ASSIGN statement, where its trying to assign a computed value to some data variable. Now i understand that there's some problem with the value getting computed in the ASSIGN statement.
     I also tried finding some SAP Notes for the same problem, but to my misery I couldn't find anything appropriate. Could anyone of you who had faced similar problem help me out.
     For further assistance in making your replies much easier here in I'm adding the information about BI 7.0 system components.
           SAP ABAP:               Level 12
           SAP BASIS:               Level 12
           SAP BW:                   Level 14
           Business Content:       Level 5
Waiting for a early solution from U guyz.........
Regards,
Syed Shujaath Ali.

Hi,
Apply SAP BW: Level 19 or 20
Business Content: 10
patches .

Error During Business Content Query Activation- Very Urgent

Hi All,
I am trying to install few queries in business cube 0pur_c01, which is already in production and already lot many queries are running.
As per requirement i have to install New quries in the 0Pur_C01
0PUR_C01_Q0012 : Ordering Activities
0PUR_C01_Q0015 : Purchase Order Values
0PUR_C01_Q0013 : Vendor Comparison re Purchase Values
0PUR_C01_Q0004 : Values Purchase Order Delivery Invoice
0PUR_C01_Q0023 : Total and Average Order Value
Out of these five quries i am unable to install 0PUR_C01_Q0012 : Ordering Activities and geeting error message during simulate install rest queries has been installed already without any issue once i have unselected the already transported
element.
I am doing the same for query 0PUR_C01_Q0012 : Ordering Activities but getting error message
Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
BEx transport request 'SBDK900497' is not available or not suitable
Regards
Premanshu Gupta

Hi,
To rectify this error,
BEx transport request 'SBDK900497' is not available or not suitable
Go to Transport Connection, there click on "BEX" "Create tranport request for BEX", there insert a new row, and create a new request. This is the default request for BEX queries.
While transporting , dont tranport this request, collect the objects which you want to tranport and create a new request.
Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
For this error, check the object in meta data repository, whether the object is in active version or not.I think this object is not in Active version thats why you are getting this error.
Assign points if it helps....

Business Content Installation with Remote Activation

Hi
During Business Content Installation, BI system attempts to do Remote Activation in the Source System
But in my case, it's searching for the datasources in the ERP source system instead of the CRM system
How do I get the Business Content to look into the right CRM system
Also, do I have to manually build the transfer rules of InfoSource to DataSource ? At the moment, I don`t have InfoSource automatically mapped to DataSource

Hi, before collecting the datasource to the right you have to select the source system by one of the following ways:
1) press Shift F7
2) click on the source system icon on top
3) goto menu Edit->Source system assignment
About your secod question check if the BI content already has a mapping defined if not you have to manually create the mapping.
Best Regards,
Brindha.

Business content installation query

Hi Experts ,
i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
now i want to install   business content in such away that current 0EQUIPMENT should not be disturbed and business content version has attributes that are time dependant
Question is shall i install 0EQUIPMENT or not, and let the old version remain , as 0EQUIPMENT is under use at few places
secondly if i dont install in future will there be any problem in loading PM data .
Please Advise,
Thanks in Advance,
Nitya

HI,
hi,
use the option Match (X) or copy.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if:
¡        The match indicator is not set, and
¡        The install indicator is set.
In other words, the delivery version is copied to the active version.
Note
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
For more info search in forums or check the sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Regards
KP

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM VSZ RSS TTY S STARTED TIME COMMAND
oracle 1353 0.6 27.2 601M 555M pts/2 S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root 3033 0.0 0.4 10.4M 7.7M pts/0 R + 10:59:44 0:00.06 ps aux
oracle 1351 0.0 0.0 2.46M 320K pts/2 I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle 1277 0.0 0.0 2.48M 312K pts/2 I + 09:02:44 0:00.04 -ksh (ksh)
root 1269 0.0 0.0 2.56M 232K pts/2 I 09:01:23 0:00.01 -sh (sh)
root 1268 0.0 0.0 5.31M 768K ?? I 09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL 08:45:31 0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31 0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

Error In Business Content

Hi,
I am getting Errors in business content when Installing objects for Infocube. like
Object '0DBMKTC01' (CUBE) of type 'InfoCube' is not available in version 'D'
Object '0DB_MC01' (MPRO) of type 'MultiProvider' is not available in version 'D'
Object '0DB_VCDS1' (ODSO) of type 'DataStore Object' is not available in version 'D'
etc.......
Please help me
Regds
Dave.

Hi,
Apply note :1009329
Re: Error while activating Infocubes (0SD_C03) from Business Content
Re: Info Objects & Data source not active.
With rgds,
Anil Kumar Sharma .P

PM business content installation

Hi Experts,
i have to start on Plant Maintanance Business content installation , Could any one provide me the data flow , what are tha data sources, first do i have to activate daatsource and replicate then activate cubes etc .
Also could any one provide me details about PM and QM Integration
Thanks In Advance
Nitya

HI ,
You can find the BI content delivered objects for PM in the below link
http://help.sap.com/saphelp_bw33/helpdata/en/b0/e3163d5abd752de10000000a114084/frameset.htm
Regards,
Sathya

Re: Business Content Installation

Hi,
I intalled cube with as usaual procedure but i can't see in workbench(RSA1). Can i know what is the problem? this is very important for me.
Thanks,
RK

Hi RK,
Check that Business content installation job has finished or not in SM37(job overview).
Once it completed, in RSA1> InfoProvider>InfoArea first Refresh your tree and click FIND to type your infocube name and search it.
you can get it surely.
NOTE: Assign points if it helps
Regards,
Arun.M.D

Business Content installation error in Solman

Hi All,
While installing Business Content for the transactional data source "0CRM_SRV_PROCESS_H" in the Solman, I came accross the following error-
"IC=0CRM_PRI IS=80CRM_CNFI error when checking the update rules"
Can any one help me regarding this BC installation issue?
Edited by: S Baruah on Sep 3, 2009 12:12 PM
Edited by: S Baruah on Sep 3, 2009 12:14 PM

See the error log for the same...there will be procedure to correct the same...just follow that...
Also see if IC=0CRM_PRI IS=80CRM_CNFI are active.

Error message in Business Content Installation

Dear All,
I am getting one error message while install some objects in FI through Business Content.
Object '0GL_ACCOUNT_T011_HIER_EC1' (ISTS) of type 'Transfer structure' is not available in version 'A
I have search around but I dont find any related to it.
Please suggest.
Thanks

Hi,
Exactly what your trying to activate?
info object or data source?
Use grouping option as - only necessary object and drag required object form middle pane to right side pane.
try to install it. If it shows any dependences then those first need to install.
above mentioned name is GL Account master data source hierarchy.
Thanks

Error in Business content Query

Hi,
we have activated the business content for General Ledger (New). We have successfully executed all data loads.
but, the standard query 0FIGL_V10_Q0001 which is activated, is not executing properly.
It throws up a message "Value '0' is invalid for property 'Ref. Characteristic' of element 'Balance Sheet Value'" and no data is displayed.
On analysis, we find that, for the calculated key figure Balance sheet value the Ref. characteristic in the Aggregation tab is set as [0]0.
Has anyone faced this issue before. could anyone help us to fix it?
Regards,
Sainath

Hi,
Please apply the note 1015402 to resolve this issue.
Best Regards
Manoj Kumar

Business content installation error

Hi,
I got an error when installing the Business content ODS (0OPA_O08).
IC=0PROD_CATEG IS=0PROD_CATEG_ATTR syntax error: rows 0
Message no. RSAU466
Diagnosis
When generating the update program for data target 0PROD_CATEG, InfoSource 0PROD_CATEG_ATTR, a syntax error occured in row 0.
thanks
kamal

kamal,
please give business content collection mode , grouping , foreground / background etc...
, your SP level , Business content version etc....
also are there any short dumps for the same in ST22 ?
Is this error repeatable ? or one off ?
Arun
Message was edited by:
Arun Varadarajan

Error during Business Content Installation of a query

Similar Messages

Maybe you are looking for