Error during Cache Refresh in 2004s after installation

Hi All,
we are getting the following error when we did the Cache Refresh after completing the installation and configuration of 2004s PI usgae type.
<b>
Error data from ID:</b>Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time.
Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine.
This is usually structured as follows:
af.<SAP System ID>.<Name of application server>
<b>Error info in SXI_CACHE:</b>
HTTP Status code 401 unauthorized.
<b>Error data from RWB:</b>
Cache notification from Integration Directory failedError when accessing the System Landscape Directory
---Detailed Error Message
Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.ltiib00812, string
would be great if somebody could help us.
Thanks in advance.
RGds,
Vasanth.

Hi
Check this Blog by Krishna Moorthy for all HTTP erros
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Also check the blog by Michal
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Thanks,
Prakash

Similar Messages

  • Error during cache refresh

    Hi guys,
    In my scenario XI to R3 via ABAP Proxy. In cache R/3 side shows me two red triangles: unable to refresh content and an error during last update. The error id BUSINESS_SYSTEM and the message is: NO INTEGRATION SERVER.
    Yesterday admin team changes the physical machine! I already create a new technical system and a new business system and import the BS to ID with a same name! I need create all the objects again: receiver interface, determination, etc?
    I also check the transactions SLDAPICUST, SICF, sm59, smicm, slscheck and sxmb_adm > Integration configuration.
    The icf services are running, the RFC connections shows a http code 500 (it means that is ok) and in integration configuration I have defined my Business sys type "LOC" and in IS_URL, the URL of XI integration server.
    I think everything is ok!
    Guys any suggestions to check other points?
    Thanks in advance,
    Ricardo.

    In the SLD your XI business system should contain the pipeline URL http://<host>:<abap_port>/sap/xi/engine?type=entry and this business system role should be <b>Integration Server</b>.
    regards
    Shravan

  • Error in cache refresh

    Error in cache refresh
    Dear all expert
    I have created one BPM scenario after when execute that scenario then problem come in cache
    Before that scenario my Pi working fine now.
    I have delete communication channel of BPM scenario but still facing problem in cache .
    I have done following step for solving problem  
    I have delete HMI rfc and recreate it when I test that RFC connection every time it will ask password I have already set login name (PIISUSER) and password in login tab
    I have found some entry in queue I have delete it
    Please help me
    Thanks
    Amit Shivhare

    Thanks to All of you
    my problem solved
    Hare I have write down all step that I have done during solving problem
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/junior/view/wlg/9857
    thanks
    Amit Shivhare

  • Error during startup of portal service after SPS11

    Hi Guys,
    After installation of SPS11 to our 2004s portal system we have problem with startup of our Portal service.
    Before SPS11 we had SPS9 system and everything was working correctly.
    Our service is connecting to Database during its initialization.
    This is part of our code:
    Properties p = new Properties();
    p.put("java.naming.factory.initial", "com.sap.engine.services.jndi.InitialContextFactoryImpl");
    try
         Context ctx = new InitialContext(p);
         _ds = (DataSource)ctx.lookup(POOLNAME);
         Connection conn = _ds.getConnection();
         conn.close();
         LogWriter.traceInfo(LogWrapper.trace,"Connection established.");
    } catch (NamingException ex)
    The error is:
    #1.5#000802A2BF4A00580000038200003E3000042C1F016BDC9A#1174411586934#System.err#sap.com/irj#System.err#Guest#2####a813ff20d70611dbbcd7000802a2bf4a#SAPEngine_Application_Thread[impl:3]_27##0#0#Error##Plain###com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of SABMILLER.
         at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)
         at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:344)
         at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:254)
         at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:271)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at cz.sap.statemanagement.StateLogRetriever.<init>(StateLogRetriever.java:73)
    The probleam appears only during startup of portal!
    If you deploy service on running portal it is started without any problems.
    We tried to apply note (Note 960199 - 2-Phase Init Mechanism for Portal Services is Deprecated) but without success.
    This is modification of our portalapps.xml as described in Note.
        <service name="StatemanagementLogService">
          <service-config>
            <property name="className" value="cz.sap.statemanagement.StatemanagementLogService"/>
            <property name="startup" value="true"/>
            <property name="twophaseinit" value="always"/>
          </service-config>
    Please could you help us with this problem?
    Anyone has an idea what is wrong?
    Thanks a lot
    Ondrej

    Hi Nirmal,
    thanks you for your quick response. This is what the installer returns when I use your suggested command:
    Mar 7, 2012 2:35:56 PM [Error]: The parameter jce_policy_zip in externally supplied configuration is invalid.
    I looked up the parameters for the STARTUP:
    rootdir [guiport] [httpport] [guistart] [guimode] [config] [sid] [instanceNr]
    Thus the jce_policy_zip is not a valid parameter.
    However, after deleting the file specified I could just run STARTUP again and this worked.
    Thanks
    Marcel
    Edited by: M. Rabe on Mar 7, 2012 2:57 PM

  • Error while running Enterprise Manager 11gR1 after installation

    Dear All,
    I have just installed Oracle 11gR1 on centOS 5 operating system. During installation I checked the option to create sample schema. During installation the installer displayed some error message regarding Enterprise Manager and told that you can run the script manually after installation is complete with the script location i.e /<oracle_home>/bin/emca
    After installtion i have run the script BUT now when i try to start dbconsole it fails.
    When i run emctl status agent it says agent is not running.
    Following is from emagent.trc file
    2009-03-01 20:44:26 Thread-3047507648 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
    2009-03-01 20:44:26 Thread-3047507648 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
    2009-03-01 20:44:26 Thread-3047507648 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
    2009-03-01 20:44:26 Thread-3047507648 WARN main: clear collection state due to OMS_version difference
    2009-03-01 20:44:26 Thread-3047507648 WARN command: Job Subsystem Timeout set at 600 seconds
    2009-03-01 20:44:26 Thread-3047507648 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
    2009-03-01 20:44:26 Thread-3047507648 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
    2009-03-01 21:37:17 Thread-3086870208 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
    2009-03-01 21:37:17 Thread-3086870208 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
    2009-03-01 21:37:17 Thread-3086870208 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
    2009-03-01 21:37:17 Thread-3086870208 WARN command: Job Subsystem Timeout set at 600 seconds
    2009-03-01 21:37:17 Thread-3086870208 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
    2009-03-01 21:37:17 Thread-3086870208 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
    2009-03-01 21:42:09 Thread-3086194368 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
    2009-03-01 21:42:09 Thread-3086194368 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
    2009-03-01 21:42:09 Thread-3086194368 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
    2009-03-01 21:42:09 Thread-3086194368 WARN command: Job Subsystem Timeout set at 600 seconds
    2009-03-01 21:42:09 Thread-3086194368 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
    2009-03-01 21:42:09 Thread-3086194368 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
    2009-03-01 22:14:44 Thread-3086542528 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
    2009-03-01 22:14:44 Thread-3086542528 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
    2009-03-01 22:14:44 Thread-3086542528 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
    2009-03-01 22:14:44 Thread-3086542528 WARN command: Job Subsystem Timeout set at 600 seconds
    2009-03-01 22:14:44 Thread-3086542528 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
    2009-03-01 22:14:44 Thread-3086542528 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
    And this is from the emagent.log file
    2009-03-01 20:44:26 Thread-3047507648 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
    2009-03-01 20:44:26 Thread-3047507648 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
    2009-03-01 21:37:17 Thread-3086870208 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
    2009-03-01 21:37:17 Thread-3086870208 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
    2009-03-01 21:42:09 Thread-3086194368 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
    2009-03-01 21:42:09 Thread-3086194368 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
    2009-03-01 22:14:44 Thread-3086542528 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
    2009-03-01 22:14:44 Thread-3086542528 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
    Kindly help me in starting Enterpeise Manager 11gR1.
    Regards, Imran

    Dear All,
    These are the messages/errors when I try to re-create OEM Repository.
    Do you wish to continue? [yes(Y)/no(N)]: Y
    02-Mar-2009 10:23:11 oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log.
    02-Mar-2009 10:23:11 oracle.sysman.emcp.EMReposConfig invoke
    INFO: Dropping the EM repository (this may take a while) ...
    02-Mar-2009 10:23:12 oracle.sysman.emcp.EMReposConfig invoke
    INFO: Repository successfully dropped
    02-Mar-2009 10:23:12 oracle.sysman.emcp.EMReposConfig createRepository
    INFO: Creating the EM repository (this may take a while) ...
    02-Mar-2009 10:26:04 oracle.sysman.emcp.EMReposConfig invoke
    INFO: Repository successfully created
    02-Mar-2009 10:26:05 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
    INFO: Uploading configuration data to EM repository (this may take a while) ...
    02-Mar-2009 10:26:32 oracle.sysman.emcp.EMReposConfig invoke
    INFO: Uploaded configuration data successfully
    02-Mar-2009 10:26:33 oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
    INFO: Software library configured successfully.
    02-Mar-2009 10:26:33 oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
    INFO: Deploying Provisioning archives ...
    02-Mar-2009 10:26:38 oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
    INFO: Provisioning archives deployed successfully.
    02-Mar-2009 10:26:38 oracle.sysman.emcp.util.DBControlUtil secureDBConsole
    INFO: Securing Database Control (this may take a while) ...
    02-Mar-2009 10:26:48 oracle.sysman.emcp.util.DBControlUtil secureDBConsole
    INFO: Database Control secured successfully.
    02-Mar-2009 10:26:48 oracle.sysman.emcp.util.DBControlUtil startOMS
    INFO: Starting Database Control (this may take a while) ...
    02-Mar-2009 10:29:58 oracle.sysman.emcp.util.PlatformInterface executeCommand
    WARNING: Error executing /Oracle/app/oracle/product/11.1.0/db_1/bin/emctl start dbconsole
    02-Mar-2009 10:29:58 oracle.sysman.emcp.EMConfig perform
    SEVERE: Error starting Database Control
    Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log for more details.
    Could not complete the configuration. Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log for more details.
    Does it give some hint. I have try to publish all the information i could get.
    Regards, Imran

  • Error in Cache Refresh(Unable to refresh cache contents)

    Hi All,
    When i am refreshing Cache from the browser using link CPACache/refresh?mode=full it says success.
    When i do from SXI_CACHE it gives an error.
       Error during last attempt to refresh cache
       Unable to refresh cache contents
    So when i run any schenario in message monitoring i get the following error-
    <i>SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">UPDATE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>http response does not contain a valid XML root tag</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error></i>
    I checked the INTEGRATION_DIRECTORY_HMI connection...
    here the response which im getting is..
    <i> HEADER NAME                HEADER VALUE
    response_line               HTTP/1.0 200
    server_protocol             HTTP/1.0
    status_code                 200
    status_reason
    ragma                       no-cache
    ache-control                no-cache
    ontent-type                 text/html
    ontent-length               87
    HTTP BODY
    TITLE>Error</TITLE>#<BODY>#<H1>Error</H1>#FW-1 at nebula: Unknown WWW s
    rver.</BODY>##
    Time (ms)                                 17</i>
    I believe that is not the right response.
    Everything was working fine yesterday when all of a sudden this error cropped up from no where.
    Regards,
    Rahul

    Hi,
    This is the error it shows there..
    <b>ERROR ID</b>      <i>UPDATE</i>
    <i>http response does not contain a valid XML root tag</i>
    Regards,
    Rahul

  • Error during the WebLogic 6.0 SP2 installation

    Hi all,
    It occurs a error during the installation of the WebLogic SP2 to HP-UX.
    Can someone help me.
    Many thanks
    Create System Password
    Invocation of this Java Application has caused an InvocationTargetException. This
    application will now exit. (LAX)
    Stack Trace:
    java.lang.UnsatisfiedLinkError: termioEchoSwitch
    at com.bea.installer.console.TermioControl.termioEchoSwitch(Native Method)
    at com.bea.installer.console.GetPassword.executeConsoleAction(GetPassword.java:77)
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runConsoleAction([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runPreInstall([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
    at java.lang.reflect.Method.invoke(Native Method)
    at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
    at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
    GUI-

    Hi.
    Please try installing again. If you can reproduce this then please open a case with support.
    We saw this once awhile ago. After seeing the error we tried installing again (same procedure,
    same machine) and it worked, so we haven't been able to reproduce this.
    Regards,
    Michael
    David Gracias wrote:
    Hi all,
    It occurs a error during the installation of the WebLogic SP2 to HP-UX.
    Can someone help me.
    Many thanks
    Create System Password
    Invocation of this Java Application has caused an InvocationTargetException. This
    application will now exit. (LAX)
    Stack Trace:
    java.lang.UnsatisfiedLinkError: termioEchoSwitch
    at com.bea.installer.console.TermioControl.termioEchoSwitch(Native Method)
    at com.bea.installer.console.GetPassword.executeConsoleAction(GetPassword.java:77)
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runConsoleAction([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runNextInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runInstallPiece([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.ConsoleBasedAAMgr.runPreInstall([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
    at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
    at java.lang.reflect.Method.invoke(Native Method)
    at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
    at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
    GUI---
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Error while connecting to workflow builder after installation...first time!

    Hi,
    I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
    220: Unable to set NLS_LANGUAGE.
    210: Oracle Error: ORA-01403: no data found
    . SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
    In the previous threads when I searched for the same issue, I found that if
    select value from v$nls_parameters
    where parameter='NLS_CHARACTERSET';
    returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
    But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
    Please help me. I tried a lot. Any type of help will be highly appreciated.
    Thanks,
    Sumir

    This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
    HTH
    Srini

  • Error during JAVA ADD-IN - DB Instance Installation

    I get the following error during the DB instance install of JAVA ADD -IN (NW 2004s SR3), I have already installed SCS instance:
    FCO-00011  The step checkForExistingOraDatabaseSchema with step key |NW_Addin_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|7|0|NW_CreateJavaSchema|ind|ind|ind|ind|1|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|checkForExistingOraDatabaseSchema was executed with status ERROR ( Last error reported by the step :Assertion failed: OraSqlContext constructor: arguments dbSidOrSrcObject and dbHome are not valid.).
    OS = Solaris
    Oracle = 10.2.0.2
    I also tried setting ORACLE_HOME and ORACLE_SID parameters which should not be necessary since I am giving the path to profile still not able to get past the error.
    Any ideas anyone.
    Thanks
    S.

    It´s not clear what you are doing.
    You are installing a standalone instance or do you install a Java addin into an existing ABAP instance?
    Markus

  • Fatal Error during SAP IK XI 3.1 Installation on HPUX IA 64 Machine

    I installed BO Enterprise XI 3,1 on HPUX IA64 Machine and after BO installation I installed SAP IK XI 3.1.
    After I ran install.sh, select language was Ok, License agreement was Ok, License Key was OK, Install Directory was OK..
    but after that, the installation was terminated...
    FATAL ERROR: Product's parent not found on tree: 1E7F3898-A4B8-42D0-89F0-A713FBDEBD64, parent id: 5418F914-1D31-4849-822C-314AC28B06BF
    $
    the error message was like above..
    What is the reason and how can I solve it..
    Please let me know..
    THanks..

    Hello,
    I think I found out what the problem is:
    In our case it seems that de installerDatabase.db file is corrupt.
    If you move the file to installerDatabase.org and start the installation again the FATAL ERROR won't appear.
    Unfortunately the installation of the integration kid can't continue because it misses several existing program items from the BO Enterprise.
    Right now Iu2019m performing a new installation of the BO Enterprise.
    I hope this inormation is helpfull.
    Regards,
    Hans Pol

  • Error during sxi_cache refresh after upgrade 3.0 to PI 7.11

    During sxi_cache we are getting the error
    com.sap.aii.utilxi.misc.api.InternalErrorException: Internal error: Link from Communication Component  | IP_NSP1007_001_PS020_BeoordelingOudeManager to object type "MAPPING" with role "IFOUT" is not permitted
    where IP_NSP1007.. is an Integration Process.
    we also getting the error when displaying a configuration object :
    Original language Dutch for current object collides with permitted display or editing languages EN; contact your system administrator
    regards meinhart Lingbeek.

    Hi,
        The problem is with the patch level after upgrading to PI 7.11. AS suggested by Hareen..Apply the latest patch (note:1344144). The problem will be resolved.
    Cheers!!!
    Naveen.

  • Error during installing SAP Netweaver 2004s WEB AS JAva  (SR3)

    Hello Gurus,
    I am installing SAP Netweaver 2004s Web AS Java   on Oracle Database  10g and HP-UX (PA-RISC 10.23).
    During installation ,in Configure UME phase iam facing an error ,due to which the installation is stuck in between. The extracted error trace of sapinst.log file is as follows:
    ERROR 2008-10-28 17:21:53.387 [sixxcstepexecute.cpp:951]
    FCO-00011 The step runUMConfigurator with step key
    |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Standalone|ind|ind|ind|ind|0|0|runUMConfigurator was executed with
    status ERROR ( Last error reported by the step :Java EE Engine
    configuration error. DIAGNOSIS: See output of logfile
    umconfigurator.log: '
    Oct 28, 2008 5:21:51 PM Info: UME configurator
    (com.sap.security.tools.UMConfiguratorLoad) called for action "setup"
    Oct 28, 2008 5:21:52 PM Error: main()
    [EXCEPTION]
    java.lang.NoClassDefFoundError:
    com/sap/engine/lib/util/cache/CacheListener
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
    at com.sap.engine.offline.FileClassLoader.findClass
    (FileClassLoader.java:702)
    at com.sap.engine.offline.FileClassLoader.loadClass
    (FileClassLoader.java:600)
    at com.sap.engine.offline.FileClassLoader.loadClass
    (FileClassLoader.java:578)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302) at
    com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>
    (ConfigurationCache.java:114)
    at
    com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
    at
    com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:60)
    at com.sap.security.tools.UMConfigModel.<init>
    (UMConfigModel.java:79)
    at com.sap.security.tools.UMConfiguratorLoad.main
    (UMConfiguratorLoad.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke
    (NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke
    (DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.engine.offline.OfflineToolStart.main
    (OfflineToolStart.java:81)
    Oct 28, 2008 5:21:52 PM Info: Leaving with return code 99 '.).
    All variable environment are set correctly (JAVA_HOME, SAPINST_JAVA_HOME).
    Java version is Java version is Java HotSpot(TM) Server VM (build 1.4.2 1.4.2.13-070317-15:01-PA_RISC2.0 PA2.0 (aCC_AP), mixed mode)
    Someone plz help me out wt is this error .
    Regards,
    Christian

    Hi Martin,
    The file  umconfigurator.log
    Oct 29, 2008 12:19:47... Info: UME configurator (com.sap.security.tools.UMConfiguratorLoad) called for action "setup"
    Oct 29, 2008 12:19:48... Error: main()
    [EXCEPTION]
    java.lang.NoClassDefFoundError: com/sap/engine/lib/util/cache/CacheListener
            at java.lang.ClassLoader.defineClass0(Native Method)
            at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
            at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:702)
            at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
            at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
            at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
            at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:114)
            at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
            at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:60)
            at com.sap.security.tools.UMConfigModel.<init>(UMConfigModel.java:79)
            at com.sap.security.tools.UMConfiguratorLoad.main(UMConfiguratorLoad.java:179)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Oct 29, 2008 12:19:48... Info: Leaving with return code 99
    Thanks
    Christian

  • Installation error during the sql server 2012 sp1 installation

    TITLE: Microsoft SQL Server 2012  Setup
    The following error has occurred:
    An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32-policy"'. Please refer to Help and
    Support for more information. HRESULT: 0x800736FD. 
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK

    This issue occurs because of a known issue in the Visual C++ 2005 runtime library setup.
    https://support.microsoft.com/en-us/kb/2688946?wa=wsignin1.0
    Cumulative update information
    SQL Server 2012
    The fix for this issue was first released in Cumulative Update 1 for SQL Server 2012. For more information about how to obtain this
    cumulative update package for SQL Server, click the following article number to view the article in the Microsoft Knowledge Base:
    2679368 Cumulative update 1 for SQL Server 2012
    For a stand-alone installation, follow these steps:
    Download the cumulative update from the Microsoft website, and install the downloaded update package in a folder that can be accessed by the server.
    Double-click the icon to run the Self-Extractor wizard. Extract the files to a folder on the server or on a UNC share.
    On the server, open an administrative command prompt, and change directory to the folder that contains the RTM SQL Server 2012 setup media. For example, run the following command:
    cd E:\SQLSetup\
    Run Setup.exe from the command line together with the /updatesource switch to direct the setup to the folder or share that was described in step 2. For example, run the following command:
    setup.exe /action=install /updatesource=C:\SQL2012CU
    The setup process will detect the cumulative update. After you accept the licensing agreement, on the Product Updates page in the setup process, select the "Include SQL Server product updates" check box to apply
    the cumulative update fixes to the RTM setup files.
    check and confirm.

  • ORACLE ERROR ORA-32314: REFRESH FAST unsupported after deletes/updates

    hi,
    I have a materialized view created with fast refresh on demand option. Now when i try to refresh it manually the next day, it gives me an error . I have both count(*) and count(1) inside the materialized view. There is update and delete transactions done on most of the tables. The refresh is set to be at 4 am though a refresh group . But it fails with the error shown below . Please help. thanks
    here is the script from toad
    DROP MATERIALIZED VIEW MYPORTAL.ACCOUNT_COST_CATEGORY_MV;
    CREATE MATERIALIZED VIEW MYPORTAL.ACCOUNT_COST_CATEGORY_MV
    TABLESPACE USERS
    PCTUSED    0
    PCTFREE    10
    INITRANS   2
    MAXTRANS   255
    STORAGE    (
                INITIAL          64K
                MINEXTENTS       1
                MAXEXTENTS       UNLIMITED
                PCTINCREASE      0
                BUFFER_POOL      DEFAULT
    NOCACHE
    LOGGING
    NOCOMPRESS
    NOPARALLEL
    BUILD IMMEDIATE
    USING INDEX
                TABLESPACE USERS
                PCTFREE    10
                INITRANS   2
                MAXTRANS   255
                STORAGE    (
                            INITIAL          64K
                            MINEXTENTS       1
                            MAXEXTENTS       UNLIMITED
                            PCTINCREASE      0
                            BUFFER_POOL      DEFAULT
    REFRESH FAST ON DEMAND
    WITH PRIMARY KEY
    AS
    /* Formatted on 2011/01/07 10:04 (Formatter Plus v4.8.8) */
    SELECT   ac.account_id,
             ac.account_manager mgr_id,
             ac.account_number,
             ac.account_name,
             bc.burden_center_name burden_center,
             p.surname_isi || ', ' || p.first_name account_manager,
             p.division_id,
             item.code_id,
             item.code_name cost_category_item,
             TO_NUMBER (TO_CHAR (ap.first_day, 'YYYY')) period_year,
             ap.first_day period,
             ap.fiscal_system_period_cal_yr_eq || ', ' || ap.fiscal_year period_asr,
             COUNT (*) total_row_count,
             COUNT (1) total_one_count,
             SUM (NVL (ad.current_expense, 0)) expense,
             SUM (NVL (ad.total_budget, 0)) budget,
             SUM (NVL (ad.cumltv_expense, 0)) cumltv_expense,
             SUM (NVL (ad.commitments, 0)) commitments,
             SUM (NVL (ad.budget_balance, 0)) budget_balance
        FROM accounts ac,
             burden_centers bc,
             personnel p,
             asr_headers ah,
             asr_details ad,
             codes item,
             codes costcat,
             all_periods ap,
             codes cost_element,
             accounting_base_group abg
       WHERE ac.account_manager = p.personnel_id
         AND ac.burden_center_id = bc.burden_center_id
         AND ac.account_id = ah.account_id
         AND ah.asr_header_id = ad.asr_header_id
         AND ah.period_asr =
                       ap.fiscal_system_period_cal_yr_eq || ', ' || ap.fiscal_year
         AND abg.cost_element_cat_item_id = item.code_id
         AND cost_element.code_id = abg.cost_element_id
         AND ad.object_code = cost_element.code_value
         AND item.code_parent_id = costcat.code_id
         AND (   costcat.code_name = 'Report 1'
              OR (costcat.code_name = 'Base' AND item.code_name = 'MTDC')
    GROUP BY ac.account_id,
             ac.account_manager,
             ac.account_number,
             ac.account_name,
             bc.burden_center_name,
             p.surname_isi || ', ' || p.first_name,
             p.division_id,
             item.code_id,
             item.code_name,
             TO_NUMBER (TO_CHAR (ap.first_day, 'YYYY')),
             ap.first_day,
             ap.fiscal_system_period_cal_yr_eq || ', ' || ap.fiscal_year;
    COMMENT ON MATERIALIZED VIEW MYPORTAL.ACCOUNT_COST_CATEGORY_MV IS 'snapshot table for snapshot MYPORTAL.ACCOUNT_COST_CATEGORY_MV';
    CREATE INDEX MYPORTAL.ACCOUNT_COST_CAT_MV_IDX ON MYPORTAL.ACCOUNT_COST_CATEGORY_MV
    (ACCOUNT_ID, CODE_ID, PERIOD)
    LOGGING
    TABLESPACE USERS
    PCTFREE    10
    INITRANS   2
    MAXTRANS   255
    STORAGE    (
                INITIAL          64K
                MINEXTENTS       1
                MAXEXTENTS       UNLIMITED
                PCTINCREASE      0
                BUFFER_POOL      DEFAULT
    NOPARALLEL;
    -- Note: Index I_SNAP$_ACCOUNT_COST_CATEG will be created automatically
    --       by Oracle with the associated materialized view.
    here is the error :
    10:10:04 SQL>  exec dbms_mview.refresh('account_cost_category_mv');
    BEGIN dbms_mview.refresh('account_cost_category_mv'); END;
    ERROR at line 1:
    ORA-32314: REFRESH FAST of "MYPORTAL"."ACCOUNT_COST_CATEGORY_MV" unsupported after deletes/updates
    ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
    ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
    ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
    ORA-06512: at line 1
    10:10:14 SQL>

    Check out the error cause and action:
    ORA-32314: REFRESH FAST of "string"."string" unsupported after deletes/updates
    Cause:      One or more deletes or updates has been performed on one or more of the detail tables referenced by the specified materialized view. This materialized view does not support fast refresh after deletes or updates.
    Action:      Use REFRESH COMPLETE. Note: you can determine why your materialized view does not support fast refresh after deletes or updates using the DBMS_MVIEW.EXPLAIN_MVIEW() API.

  • "already exist" error during JD Edwards EnterpriseOne 9.0 installation

    Hi all
    I am trying to install JD Edwards EnterpriseOne 9.0 and i am having the following error:
    "Prototype Control Tables and/or Business Data already exist. The installer detected an existing Prototype Environment on your computer. Please go back and switch to Upgrade Mode, or click cancel, and uninstall your existing Prototype Environment and try again."
    I have installed successfully the deployment server but when i try to install the enterprise server i am having this error. After installing the deployment server(on windows with oracle database) i do not know which are the default credentials for entering the E1LOCAL database created.
    Can you please suggest how can i solve this issue?
    Thank you and best regards

    Check NLS_LANG in HKLM\SOFTWARE\ORACLE\KEY_XXX It must be AMERICAN_AMERICA.AL32UTF8

Maybe you are looking for

  • My iPod touch 4th generation 8gb won't let me download apps even though I have enough space?

    I am trying to download the game Modern Combat 4: Zero Hour which is 1.54GB and I have 3.1GB of space on my iPod but when I try to download it, it says that there is not enough local storage space to download it. Can someone help me as i would like t

  • Typing in Acrobat Professional

    I typed some information into a document using Acrobat Professional, I saved the document and then went back to make changes and cannot.  Any ideas why? I can on other documents that I open, just not this one. I have been having difficulties lately w

  • Email Attachment is not Working for xml file

    Hi All, if any one has any answer to this below Query, Your help will be highly appreciated. 1- while configuring the email for attachment i am getting the selection failure Error in Content Encoding line where i am setting the base64 for encoding. P

  • With 6 what are the steps to install Oracle 11gR2?

    In public-yum at least there doesn't appear to be any oracle-validated to get the dependencies loaded before trying to install Oracle. So what is the process with R6U0?

  • Issue: Windows 8.1 - DPI Scaling

    I want to know if there is a way to disable auto scaling on start screen in windows 8.1. My laptop does not have a touch screen, so this scaling is useless for me and it get worse when I connect my laptop into my TV, the Tiles on my screen get even b