Error during chmlib update
Here is the output of pacman -Syu:
1:58% pac chmlib ~
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
resolving dependencies...
looking for inter-conflicts...
Targets (1): chmlib-0.40-1 [0.03 MB]
Total Download Size: 0.00 MB
Total Installed Size: 0.17 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
chmlib: /usr/bin/enumdir_chmLib exists in filesystem
Errors occurred, no packages were upgraded.
When I tried to do «pacman -Rd chmlib» it was removed successfully, but nothing changed.
Hi,
Just forward the note to your developer and they are able to help on this, by perform the manual correction attached to the note.
You can do it if you have basic knowledge in abap.
click on "Correction Instruction" at the bottom of the note, new window appear which provided the affected object name.
You can search the object name in SE80 and perform the changes accordingly, which delete and insert few lines in your case.
Cheers,
Nicholas Chang
Similar Messages
-
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi,
I got an error during spam update. The version is ECC 6.0. It got terminated during the phase IMPORT_OBJECT_LIST. how it can rectified.
Pls help me in resolving the issue.
Regards,
KrisHi,
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable DIR_LIBRARY is not set.
ERROR: Connect to DEV failed (20071118181034).
This is the error i got when i checked the tp log
can any one suggest a resolution?
Regards,
Kris -
After software download and update Adobe Application Manager gives the following errors:
Touch App Plugin Update
Installation failed. Error Code: U44M1P7
DPS Desktop Tools CS6 2.05.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
What do I need to do?Hi there,
Please follow the instructions mentioned in the below document:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html
Regards,
Jairaj -
Unkown error during software update... What's happening?
Last night I set my iphone up for an update. It first decided to backup itself... Which took ages, so I went to sleep leaving the process on.
When I woke up in the morning, it said "Update is failed due to an unkonwn error"... something along those lines anyway.
Now my iphone does not start, itunes does not recognize it as well.
Since I have got it, everyday, I am coming to realize another thing that is wrong with this phone... It really *****! It is the second last worst phone I had ever used in my life, if not the worst!
Itunes never sync properly, it is either my calender or songs that are left out...
Somebody please advice something so it starts to work out...
(For those who don't have an iphone yet; NEVER BUY ONE. IT IS A GREAT HARDWARE BUT SOFTWARE IS HORRIBLEHello,
Regarding the error in software update: It just means you lost your internet connection, but it was the fault of something on your side, not Apple's side. Try again later, or better yet, try it somewhere else. Sounds like your internet setup (your router, modem, etc) is having problems. -
Error during software update, slow browsing speed and maximum force quits ?
I have a mac book. Today i was doing software update, it gave me an error "operation could not be completed, connection reset by peer" ? now what does that mean?
I had recently downloaded open office application which i have deleted it. Further my internet browser are so slow that i feel surfing in stone age.
Besides, i have seen my system is getting pretty slow and i have to use force quit as some operation do not respond to the request.
What to do?Hello,
Regarding the error in software update: It just means you lost your internet connection, but it was the fault of something on your side, not Apple's side. Try again later, or better yet, try it somewhere else. Sounds like your internet setup (your router, modem, etc) is having problems. -
Backup error during iOS5 update
Just trying to update my ipad2 to iOS5 and iTunes gives me a message - unable to backup error -54, with the option to continue but lose all the data. Backs up perfectly during a normal sync - just won't do it for the update. Does anyone know why this error is hapenning and what to do about it please?
http://support.apple.com/kb/TS3694#error48
-
HT4623 Why does my iphone say "Activation Error" during the updating process?
after updating my iphone, the process is like asking the language, then the country, and then the wifi right? after i connected to the wifi, i pressed "next" then it says "Activating your Iphone" then suddenly it says "Activation Error". what does this mean? can i just restore the previous version of this iphone again?
You cannot install the previous version. "Activaton error" usually means that the phone was hacked or jailbroken to unlock it from the carrier it was locked to. It is now locked again to that carrier.
-
I tried to update the latest OS, error message appears in the middle of updating. iTune logo and connected appeared on iPad screen. iPad does not work since then. Any. Suggestion?
Connect the iPad to your computer and launch iTunes. Do as the message says. You probably have to restore the iPad now. Click on the summary tab when iTunes opens and click on restore. Restore from your backup when you are done.
Restoring iOS software. Pay attention to the very last part of the article as well.
http://support.apple.com/kb/HT1414 -
Indexing error during an update
Hello,
I have got this error message some times when I update a document
"Full text index failed. Unexpected failure by Indexer.
Content has been indexed with Info only. Resubmit should only be
performed if the problem has been resolved. "
I have not got any apparent problem with my indexation process so I
don't understand what is the problem.
Thank you for your response.Hi,
Usually, these kind index error occur because of inconsistent data between the vault folder and database.
If it only happening for a specific item, then try idcanalyser utility to fix the data. Otherwise check your incremental index setting.
Also, you can resubmit and see if it indexes properly to rule out any network glitch.
Thanks,
Premkumar -
Whenever I plug my 60Gb iPod in, it shows up just fine and everything that it should. Be soon after I click "Update iPod" it stops and says "Unknown disk error" now i have done everything, re-install, deleting, formatting.... like it doesnt help! It's not a particular song either cuz you'll then try again and it will work for acouple songs and then break down again. Can anyone give me advice? was it something I did on setup?
Welcome to Apple Discussions!
Make sure that everything on the CD was updated...
http://www.apple.com/ipod/download
http://www.apple.com/itunes/download
btabz -
When I was trying to update my iPod to iOS4 I got an "Error 14"
After this, my iPod went into "Restore Mode" and I've tried restoring but I waited 3 hours and the restoring bar didn't move at all.
I have tried multiple things including trying different USB ports/cords, uninstalling/reinstalling iTunes, and putting the iPod into DFU mode.
I don't really know what to do now, and I'm really hoping to get my iPod working by Monday, the 28, because I'm leaving on vacation.Apple is not here. This is a user to user forum.
http://www.apple.com/feedback/ipad.html
Dah•veed -
Hi everyone. I got a big problem. I updated my iTouch 4 (32 GO) , and there was an error . And now, my ipod ask me to sync with iTunes, but Windows & iTunes doesn't recognize the ipod. I reboot my computer, iTunes, my iPod, and nothing change ! Can you help me please ?
Waht ws the wording of the error message? Most give an error number. The following list possible errros and their resolution.
http://support.apple.com/kb/TS3694
You might want to try placing the iPod in recovry mode and then try restoring the iPod via iTunes. This will erase the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Logical (feeder) system cannot be determined - GTS error during BP Update
Hi All,
While updating a BP in CRM system, I am getting the following error in application log SLG1 as "Logical (feeder) system cannot be determined". This occurs when we change or create a BP and call the function module " BAPI_TRANSACTION_COMMIT". The issue occurs from the function module "/SAPSLL/BP_XI_GET_LOGSYS" that does not provide any logical system. I feel this is due to any changes in GTS configuration as we did not find this issue earlier. Can anyone please provide me some directions in rectifying this issue.Hi,
I just checked for the customer in GTS, but it is not shown there. I have following observations:
1. If i try to transfer Vendor from ECC to GTS, it is happening successfully. I could see that vendor in GTS.
2. Seems like Partner Number is allocated to Customer in GTS. I transferred Customer after successfully transferring vendor, Customer transferred failed!. So I again transferred Vendor from ECC to GTS, this happened successfully.
Observation:
First successfull vendor transfer: Partner Number in GTS: 134
Unsuccessfull transfer of Customer: Not visible in GTS
Second successfull vendor transfer: Partner Number in GTS: 136
Please see the above observation and let me if anything can be dudcted from this.
Also checked table BUT100 in GTS for Business Partners. Customer not visible here too.
Please Help!
Regards,
Madhav -
Unexpected Error during Software Update
Every time I try to do a software update on my macbook, it downloads, then says restart to install updates.
When I click restart it gets about half way and then says "None of the selected updates could be installed. An unexpected error occurred."
Please help!!!!Which exact update is it?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Maybe you are looking for
-
After switch to new Imap server, todos in Mail no longer work
I use mail.app with imap and have used the "to do" feature a lot to mark mail messages with a follow up todo. This is the function where you select some text in the mail message and click the to do button, and a little yellow pad opens at the top whe
-
BPC 7.5 for Netweaver : Config ABAP Server
Hi Experts, After installing BPC 7.5 SP07 add-on on a Netweaver 7.0 EhP1 SP06, I have to activate BPC content. I did installation in mandant 000. BW is running on mandant 100. In which mandant should next steps be done? 1/ BPC Users creation 2/ Trans
-
Firefox search box no longer displays any search engines and won't save any new ones
A while back the default search box in firefox 4 randomly lost all the search engines in it and the box to restore defaults is permanently greyed out so I can't restore it. I've tried deleting the files mentioned in other responses as well as just mo
-
Firefox won't always minimize or resize. The upper right hand corner just pulsates. Looking through forums, I found that using f11 can help, but it doesn't always work. Often I have to reboot. == This happened == Not sure how often == A year ago, may
-
How to fix corrupted/partial songs in iTunes match?
Recently I dowloaded 5 new albums from soundcloud and added them to my iTunes library. Since I subscribe to iTunes match my mac started to upload the 'unmatched' files to the 'cloud' for access across my many devices. Once available I decided to play