Error during combining pictures together

Hello,
I'm trying to combine one jpg file and 4 png files together as the attachment. The original pictures are in a network folder and I mapped the network folder as z:\ in windows explorer. At the beginning, it can work well, but after serveral hours, the files in the network are not accessible. I had to close labview totally and restart LV and the vi, then it could work again.
I tried to use two computers to run the same program to access the same network folder. If both stopped working, restart LV in one PC could only get this one alive and I had to do the same thing in another PC.
If I use local folder instead of the network folder to read the pictures, the program can work well all the time.
What's the possible reason and how to solve it? Thanks!
Best regards,
George
Attachments:
test.llb ‏198 KB

Hi,
I don't understand very well, the standard characteristic for images is /CCM/PICTURE.
It's a complex characteristic composed by
/CCM/DESCRIPTION
/CCM/URL
/CCM/MIME_TYPE. (for example image/jpeg).
If your problems still exist, you can send me your file
Regards

Similar Messages

Error during upload pictures in CCM 2.0 via CVS file

Hello everybody,
We're using SRM5.0 and CCM2.0.
I'm trying to upload (via CVS upload) pictures but during the upload in the supplier catalog following error message appears: Value for catalog item xxx (supplier part number) of supplier xxx is incorrect.
This errors appears only when we add our picture characteristics which are in our upload file : /CCM/PICTURES#/CCM/URL and also /CCM/PICTURES#/CCM/DESCRIPTION.
We put all pictures in MIME repository and also put the MIME repositerory URL link on schema level into procurement catalog. We're using "Pictures" characteristic. But I know that characteristic "Image" also exists. What do I have to use? Do I have to put something specific into cahracteristic /CCM/PICTURE (our OCI field is still empty there...)?
It would be great if somebody can help me on that,
Regards,
Caroline

Hi,
I don't understand very well, the standard characteristic for images is /CCM/PICTURE.
It's a complex characteristic composed by
/CCM/DESCRIPTION
/CCM/URL
/CCM/MIME_TYPE. (for example image/jpeg).
If your problems still exist, you can send me your file
Regards

In updating my iPod to 6.1.2, I received an error during the update. Now, ipod is not rebooting. Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture. I don't know how to reset so that I can restore my backup

In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Error message during burning: Error during rendering/encoding

Hello,
I am using iDVD 6.0.2 to create a DVD. I have pictures and videos. The videos are in .ASF format and they are played on Quicktime on my computer.
Anyway, when I go to burn the DVD, it goes through the slideshow fine. But then, once it starts videos, it stops and the following error message shows up:
Encoding Video
Error during rendering/encoding
I am using a Memorex DVD-R (8x, 4.7 GB, 120 min video) dvd. Is there any way possible I can fix this problem? I really need this DVD soon. Thank you so much.

Best Buy and Office Depot carry Verbatim by me. Use only DVD-R, not DVD+R.
My guess is that .ASF file...........
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)

What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says impo

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

Error during Material Cost Estimate (CK11N)

hi friends,
I am getting am error during the material cost estimate run.(ck11n)
"No control record for the activity type"
please let me know what is the problem.
regards
Ramesh

Ramesh,
System is not able to determine activity type price.
You need to input activity price in transaction KP26 for Version 0/Period/Cost Center/Activity Type combination.
Regards,
Prasobh

MS05 transaction throws "SQL error: error during INSERT (table: &)"

Hi Team,
I am a BASIS engineer on MM system. we have a strange problem from customers we see an error on the MS05 screen with "SQL error: error during INSERT (table: &)" and when the support team runs MS01 transaciton this error gets resolved.
What I would like to know is what could be the likely cause of this error and how we can prevent it.
When I check the SM21 logs i noticed one log with "Transaction cancellation 61 204 ( PLAF )"
and under additional document section is the log I see the below information
Usually, the reason for this error is that an entry already exists
with the same key.
This problem can occur if the client was copied with the movement data
without adjusting the number range intervals.
Please check if the number ranges for this table have been set
correctly and, if necessary, correct the number range interval.
I am from BASIS and I have no clue in how the MM transactions are linked can any MM gurus help in identifying the root cause for this problem.
any help on this is highly appreciated
thanks
Vijay

Hi
Are MS05 & MS01 you're referring is a T-code?. if so, then they are associated with planning and a PP consultant can give a more clear picture on it. Try posting this to a PP forum.
Based on the error log, i guess this may arise because of the number range problem, when the document is getting saved and record is being tried to inserted into a table.
Thanks
E.Avudaiappan

Suddenly "Fatal error during GPU init" during boot - radeon

Hi,
after a rather abrupt shutdown my system doesn't boot correctly anymore.
I have an Asus laptop with an ATI radeon HD 2400 (so the sticker on the laptop says - I'm not really a hardware guy)
Before:
While booting, the kernel/console output had bigger, somewhat non-high-resolution letters. Halfway in, the letters changed into a smaller, higher-defined font which was more "beautiful".
Sorry, I don't know what mechanism that is, so I had to describe it that way.
After:
This doesn't happen anymore. Rather, I get this message during boot (this is a copy out of /var/log/errors.log):
Jun 21 17:59:55 localhost kernel: [ 4.081919] radeon 0000:01:00.0: Fatal error during GPU init
Jun 21 17:59:55 localhost kernel: [ 4.082998] radeon 0000:01:00.0: no bo for sa manager
Jun 21 17:59:55 localhost kernel: [ 4.083059] [TTM] Trying to take down uninitialized memory manager type 1
I already tried the following:
- reinstall xorg and xf86-video-ati
- sections "Enable KMS" and "Troubleshoot KMS" from that wiki entry:
https://wiki.archlinux.org/index.php/ATI
- scream and slightly hit the side of the laptop
Nothing worked. Could anyone tell me where to continue searching? I'd hate to reinstall a 1-week old system.
Thanks in advance,
Alex

If you remove the ati drivers, the mesa-drivers are used I think.
Since the open source drivers don't work, you should try the closed source drivers (ATI Catalyst) from the AUR. Installing this is a bit of a hassle. The catalyst driver does not support Xorg 1.12, so you have to add a repository for Xorg1.11 and downgrade (see the wiki page). Then, you should install either catalyst-utils and catalyst-hook from AUR (as described in the wiki) or catalyst-total (which combines both and is also mentioned in the wiki).
See the Catalyst Wiki for all information.
Catalyst Utils in AUR
Catalyst Hook
Catalyst Total
edit: I just read the wiki. It seems like there is an easier way to install things now: https://wiki.archlinux.org/index.php/AT … repository
Last edited by Terminator (2012-06-25 23:32:39)

Detect some error during PININST_BBV HP Envy 4-1130ew

Welcome.
My problem is with the recovery kit with usb.
Error Detect some error during PININST_BBV
I did it in the bios as reported on
http://h30434.www3.hp.com/t5/Notebook-Recovery/quot-Detect-some-error-during-PININST-BBV-quot/td-p/2...
So F9 and enter.
And still nothing.
The computer has been added frames with 6 gb ram 16gb.
The computer is not guaranteed.
Is it possible that by adding ram recovery does not work?

Thanks for the reply.
Unfortunately, it did not help.
There is still this error message.
Date in the bios I changed after every reboot.
I set 01.01.2012.
at włanczaniu bios change date on 07.03.2012 (from what I remember)
I tried to upload a clean windows 8.1
the pendrive.
The installation went fine.
The product key fits into the bios.
Compuer works.
Only I still have the impression that it is you should not take place in this way.
If you have the original system compuer windows 8.
I bought extra recovery kit by serial number of the computer.
That's why it does not work.
I spent money (again) on the original system.
And I am forced to upload another and combining to make it work.
I do not understand this policy.
The problem I think is not resolved.
Please send me any other suggestions.

Error during building

hello,
i am trying to burn a dvd from idvd using professional encoding. twice at the end of burning (4 hours later) i get a message saying there has been an error during building (multiplexing?) i burned the same idvd project using high encoding and everything seemed to work ok. i want to try the pro encoding to see if there is a difference in quality.
another question... my project is in widescreen and looks great on my computer but in my dvd player, on my tv it's a bit stretched. why would this happen and can i fix or avoid it?
thanks for any advice
jean

Hi
Multiplex error is a very complex problem due to many things (long long list following) - on common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else converted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref file
8. Make a new iDVD project
9. Movies in project with same aspect ratio eg 4x3 or 16x9
10. No other programs/applications running during iDVD process. eg Internet, screen & energy savers
Yours Bengt W

JBO-27122:SQL error during statement preparation + ORA-01006:bind variable not exists

(1) I have built a BC4J View called CallFunctionView which acts as a view i used to call existing PL/SQL functions. My implementation servlet code is presented with the following structure:
public class MyServlet extends HttpServlet {
// Get vector element to perform validation for rule 1 and rule 2
for (int i = 0; i < MyVector.size(); i++) {
MyVectorRow MyRow = (MyVectorRow) MyVector.elementAt(i);
MyRow.checkRule1(am, i);
MyRow.checkRule2(am, i);
(2) Both checkRule1 and checkRule2 will call the ViewObject CallFunctionView. Related codes for checkRule1 and checkRule2 are listed as follows:
public void checkRule1(ApplicationModule am, int intRowIndex)
throws JboException, Exception {
ViewCdCallFunctionImpl vo = (CallFunctionViewImpl) am.findViewObject("CallFunctionView");
if (vo == null) {
throw new JboException("View Object is null!");
vo.setQuery("SELECT PKG1.MyFunctionOne(?,?,?,?) FROM DUAL");
vo.setWhereClauseParam(0, param1); // param1 is string
vo.setWhereClauseParam(1, param2); // param2 is string
vo.setWhereClauseParam(2, param3); // param3 is String.valueOf(int)
vo.setWhereClauseParam(3, param4)); // param4 is String.value Of(int)
vo.executeQuery(); <- Point of exit where my mentioned error occurs at the second loop
public void checkRule2(ApplicationModule am, int intRowIndex)
throws JboException, Exception {
ViewCdCallFunctionImpl vo = (CallFunctionViewImpl) am.findViewObject("CallFunctionView");
if (vo == null) {
throw new JboException("View Object is null!");
vo.setQuery("SELECT PKG2.MyFunctionTwo(?,?,?,?) FROM DUAL");
vo.setWhereClauseParam(0, param1); // param1 is string
vo.setWhereClauseParam(1, param2); // param2 is string
vo.setWhereClauseParam(2, param3); // param3 is String.valueOf(int)
vo.setWhereClauseParam(3, param4)); // param3 is String.valueOf(int)
vo.setWhereClauseParam(4, (blnYes)?"Y":null);
vo.setWhereClauseParam(5, (blnYes)?"Y":null));
vo.executeQuery();
(3)The called functions are from different package and with different parameters. For the loop i = 0, no error occurs and both functions generates expected result. For execution of the first function in the second loop (when i = 1), error occurs with the following messages(JBO-27122: SQL error during statement preparation. + java.sql.SQLException: ORA-01006: bind variable does not exist):
oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT PKG1.MyFunctionOne(?,?,?,?) FROM DUAL
     void oracle.jbo.server.QueryCollection.executeQuery(java.lang.Object[], int)
     void oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(java.lang.Object, java.lang.Object[], int)
     void oracle.jbo.server.ViewRowSetImpl.execute(boolean, boolean)
     void oracle.jbo.server.ViewRowSetImpl.executeQuery()
     void oracle.jbo.server.ViewObjectImpl.executeQuery()
     void MyPkg.objects.MyVectorRow.checkRule1(oracle.jbo.ApplicationModule, int)
     void MyPkg.servlet.MyServlet.doPost(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
     boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
     void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
     void com.evermind.util.ThreadPoolThread.run()
## Detail 0 ##
java.sql.SQLException: ORA-01006: bind variable does not exist
     void oracle.jdbc.dbaccess.DBError.throwSqlException(java.lang.String, java.lang.String, int)
     void oracle.jdbc.ttc7.TTIoer.processError()
     void oracle.jdbc.ttc7.Oall7.receive()
     void oracle.jdbc.ttc7.TTC7Protocol.doOall7(byte, byte, int, byte[], oracle.jdbc.dbaccess.DBType[], oracle.jdbc.dbaccess.DBData[], int, oracle.jdbc.dbaccess.DBType[], oracle.jdbc.dbaccess.DBData[], int)
     int oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(oracle.jdbc.dbaccess.DBStatement, byte, byte[], oracle.jdbc.dbaccess.DBDataSet, int, oracle.jdbc.dbaccess.DBDataSet, int)
     void oracle.jdbc.driver.OracleStatement.doExecuteQuery()
     void oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()
     int oracle.jdbc.driver.OraclePreparedStatement.executeUpdate()
     java.sql.ResultSet oracle.jdbc.driver.OraclePreparedStatement.executeQuery()
     void oracle.jbo.server.QueryCollection.executeQuery(java.lang.Object[], int)
     void oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(java.lang.Object, java.lang.Object[], int)
     void oracle.jbo.server.ViewRowSetImpl.execute(boolean, boolean)
     void oracle.jbo.server.ViewRowSetImpl.executeQuery()
     void oracle.jbo.server.ViewObjectImpl.executeQuery()
     void MyPkg.objects.MyVectorRow.checkRule1(oracle.jbo.ApplicationModule, int)
     void MyPkg.servlet.MyServlet.doPost(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
     boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
     void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
     void com.evermind.util.ThreadPoolThread.run()
I have tried commented either MyRow.checkRule1 or MyRow.checkRule2 for execution. No error occurs for that. The problem occurs when i put the two together in a loop ... the parameter number for Pkg1.MyFunctionOne is less than Pkg2.MyFunctionTwo, which corresponds to the error message 'Bind variable does not exist' ... any cache for calling the function that causes the error at running the vo.executeQuery statement?
Question: Does anyone has any ideas about the error origin and solution? (It is very important to me because i still have several check rules in addition to those mentioned 2 rules.)
Thanks for replying!

Oic ... thanks for your help, but i find a strange thing. No error message is prompted when i break the loop as follows:
// Get vector element to perform validation for rule 1 and rule 2
for (int i = 0; i < MyVector.size(); i++) {
MyVectorRow MyRow = (MyVectorRow) MyVector.elementAt(i);
MyRow.checkRule1(am, i);
// Get vector element to perform validation for rule 1 and rule 2
for (int i = 0; i < MyVector.size(); i++) {
MyVectorRow MyRow = (MyVectorRow) MyVector.elementAt(i);
MyRow.checkRule2(am, i);
It works, but quite strange ... is it a bug for calling the interface setWhereClauseParam(int, object)? As long as all the bind variables have value (your bind-var array is filled perhaps due to previous setWhereClauseParam, the query will work. What's critical is you get the right query every time :)

?¿There was an error during muxing preparation (project conversion).?¿

*There was an error during muxing preparation (project conversion).*
can anyone elaborate on this?

Same thing just happened to me. I re-output my quicktime movie with chapter markers turned off. You probably have a chapter mark set too close to the beginning, end or near a transition. I didn't have time to futz with the markers so I just turned them off.
Muxing stands for multiplexing. It's when iDVD takes all the data layers, video, audio etc. and multiplexes them into one data stream. When you play the dvd in your player that one data stream is DE-Muxed back into the original layers.
When you give iDVD a quicktime movie with chapter marks it encodes those chapters as separate mpeg 2 clips. When it muxes it combines everything into one stream. If there are any inconsistencies then muxing fails.
DVD Studio pro gives a more detailed log when muxing fails. It usually involves problems with chapter marks.
Message was edited by: Daniel Nocera

Combined pictures and a video quickly for a presentation

I have an immediate need to combine pictures and video together.
It is for a fallen solider’s memorial tomorrow at a church that has a video/audio system.
I do not know what type of system but once I get it done I can put it on a DVD or CD or flash drive.
There are 49 pictures which should run for about 6-10 seconds and a video of the Burial at the national cemetery.
I have iDVD and iMovie and am willing to buy or download a program.
I have a friend that may have other programs on a PC.
This needs to be quickly done.
Help is really needed
Thanks
Greg

As you are obviously in a hurry, the last option in the following may be your quickest bet:
There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089
Message was edited by: Klaus1

Error during combining pictures together

Similar Messages

Maybe you are looking for