Error during connecting to BW reports
Hi everybody!
I have a problem with my EP. I need to execute a BW report in *Business Package component* for assets.
When i try to use this report I have this error message:
Unknown system 'Only SAP R/3 system are supported currently'.
I've configured a connection to my BW system (I've defined a new system in --> system administration, System configuration).
When i try to the connection test (SAP Web AS Connection, ITS Connection, Connection Test for Connectors) everythig works.
In my BW system definition the object of my BW CONNECTION is defined as System Category: "Like R/3 System" and I can't change this value.
System type is defined as "SAP_BW"
Remote Host Type is defined as "E" (external system)
Please help me to configure the correct access metod to my BW system.
Thanks a lot!
Alex
Hi,
without knowing this business package, could you try to change the system type to SAP_R3. The error could mean that the BP is expecting a R3 system and no BW system.
So if it retrieves the information from the System type attribute changing this setting might help.
Just a guess...
Regards,
Holger.
Similar Messages
-
Error during connect to the instance Content Server MAXDB-XSERVER Receive
We rebooted this mornning a PROD Instance with SAPDB!
Second Instance is a Content Server. Now, we got an error during connect via
DBM Gui to Maxdb 7.6.06.04
2011-08-19 10:06:32 577 ERR 11926 XSERVER Receive packet, Ref:8 - socket recv error (110:Connection timed out
Environment variable : 1. Insctance PROD
2. Instance Prod Content Server
We couldnt connect to the database Instnce via DBMgui and also DB50 all collected data are visible, but its possible to start
DBACOCKPIT, analyse DB analyser : Message
Info Size of data cache 260306 pages, 99.98% in use, size of converter cache 1762 pages
Its seems so regarding to the Info of DB Analyser: Instance CSP (sap1) is up since 2011-06-10 12:20:10 that the Content server
didnt recognize that there was a boot this morning!!
In DBACOCKPIT it seems to be o.k. ! We could not boot the PROD Host asap again, because of the maintenance time window!
Where we could check more featur. of the content server. The processes seems to be o.k.!> Near the same problem occurs on our backup content server MAXDB!
> The backup runs during this situation a expanded longer time as normal. I get in DBM Gui today always the error code -4 socket recieve error, the Icon goes green, but there isnt any possibility to analyse the check area -> Diagnosis Files, to improof the status via gui! Via tc DBACOCKPIT i could connect to the instance and get some data! For example, If i try to stop the DB analsyser, its not possible.
I would stop the full gui and also end all dbm*.exe processes in the task manager and start it new.
Markus -
BPC 75M - Modify Application error "Cannot connect to the Reporting Server"
I have trouble with Modify Application, also in ApShell. Maybe you have a clue what it can be the problem.
Configuration: single server BPC 7.5M SP3, Windows Server 2008 SP2, SQL Server 2008 SP2
Installation user is a domain user.
No errors during installation, no error in Server Manager diagnostics.
But when I try to modify an Application from BPC Admin it gives an error for step "Make OLAP database and Journal/Audit reports. / Validate dimension formulas.".
In tblLogs I see the error message:
==============[System Error Tracing]============== [System Name] :
AdminServerHandler [Message Type] : ErrorMessage [Job Name] :
AdminApplicationHandler : ExecuteModIfyApplication [DateTime] :
10/19/2010 1:19:13 PM [UserId] : MYDOMAIN\MYUSER
[Exception] DetailMsg : {System.Exception: Cannot connect to the Reporting Server at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.SetChangeDimensionForAudit(String strAppset, String strApp, String strUserID, Boolean blnIsChangedDimension, String& strErrMsg) at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.ExecuteModIfyApplication(String strAppSet, String strApplicationName, String strApplicationDescription, String strSourceApplicationType, String
strNewApplicationType, String strRateApplicationName, String
strOwnerShipApplicationName, String strCurrencyConversionsCalculation,
String strCalculation, String strIntercompanyBookings, String
strUSEliminations, String strOpeningBalance, String strValidations,
String strIntercompanyEliminations, DataTable dtDimensionList, Boolean
bReassignSQLIndex, Boolean bProcessApplication, Boolean bDeleteFact,
String strChangeAppType, String strUserID, String strReportBackID)}
==============[System Error Tracing End ]==============
Edited by: Alexandru Berindei on Oct 26, 2010 7:57 PM
Edited by: Alexandru Berindei on Oct 26, 2010 7:58 PMThere were problems accessing the web page HTTP://server/reports
Error message: "Reporting services 2008 user does not have required permissions"
It was possible to open the page HTTP://server/reports with local administrator user and I fixed this problem by performin following:
- add Content Manager right to bpc installation user
- disable UAC from Windows Control Panel > User Accounts
Still Modify Application gives the same "Cannot connect to Reporting Services".
I tried:
- check that BPC Installation User is part of Local Administrators
- reboot server
- reinstall BPC after disabling UAC
- reinstall everything except the Windows Server 2008
- I installed another computer with the same exact configuration but with a local BPC Installation User and it works.
Have anyone installed BPC 7.5M SP3 on single Windows Server 2008 SP2 , with SQL Server 2008 SP2 and with BPC Installation user a domain user?
Maybe you have an idea of what I should check next.
Thank you,
Alex -
Error during connection test in C4C
Hi,
during connection test in C4C i receive Service-Ping-Error: Internal Server Error (500).
The following error shown in HCI.
Inbound processing in endpoint at https://iflmapgbt104xxxxavtaio-xxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
Message Processing Log{
IntermediateError = true
MessageGuid = AFUUKFubmbS4sE_0LvLxGiXTI0v4
Node = xxxxxxxx.od.sap.biz
OverallStatus = FAILED
StartTime = Thu Mar 26 15:40:11 UTC 2015
StopTime = Thu Mar 26 15:40:11 UTC 2015
Children [
An error has occurred in CXF Inbound Request{
Error = Inbound processing in endpoint at https://iflmapgbt104xxxxxavtaio-xxxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
StartTime = Thu Mar 26 15:40:11 UTC 2015
Status = FAILED
Can anyone help me on this issue?
Cheers
FlorianHi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian -
Error During Activation while activating Report Selection Texts
Hi,
I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
Thanks and Regards,
VenkatHi ,
Try activating it through se80 , as it activates the complete object .
In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
Regards,
Sureshp. -
Error During Connection Pool Reserve Test
When using Oracle 9 XA Thin JDBC driver on WLS 6.1sp3, I receive the following
error when a reserved connection is tested. Any ideas?
Thanks,
-jb
<Jul 31, 2002 9:03:26 PM PDT> <Info> <JDBC Pool test> <A connection from pool
dsn
was tested during reserve with a select count(*) from TEST_SCHEMA.TEST_TABLE
an
d failed:
>
<Jul 31, 2002 9:03:26 PM PDT> <Info> <JDBC Pool test> <javax.transaction.xa.XAExc
eption
at oracle.jdbc.xa.OracleXAResource.disallowLocalTxnMode(OracleXAResource
.java:1045)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:15
3)
at weblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
at weblogic.jdbc.common.internal.ConnectionEnv.test(ConnectionEnv.java:9
61)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:465)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400)
at weblogic.common.internal.ResourceAllocator.reserveWaitSecs(ResourceAl
locator.java:390)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:163)
at weblogic.jdbc.common.internal.ConnectionPool.reserveWaitSecs(Connecti
onPool.java:117)
at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:
1136)
at weblogic.jdbc.jta.DataSource.prepare(DataSource.java:696)
at weblogic.transaction.internal.ServerResourceInfo.prepare(ServerResour
ceInfo.java:1178)
at weblogic.transaction.internal.ServerResourceInfo.prepare(ServerResour
ceInfo.java:422)
at weblogic.transaction.internal.ServerSCInfo.startPrepare(ServerSCInfo.
java:186)
at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(Serv
erTransactionImpl.java:1832)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(Ser
verTransactionImpl.java:1606)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:217)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:189)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:278)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:214)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1865)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1819)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>Hi Jeff,
Do you see any oracle XA trace files, they are normally created in the
folder from where you start WLS and have a trc extension. Can you post that
file here so we may see the real problem that is normally logged in that
file.
sree
"Jeff Brown" <[email protected]> wrote in message
news:[email protected]...
>
When using Oracle 9 XA Thin JDBC driver on WLS 6.1sp3, I receive thefollowing
error when a reserved connection is tested. Any ideas?
Thanks,
-jb
<Jul 31, 2002 9:03:26 PM PDT> <Info> <JDBC Pool test> <A connection frompool
dsn
was tested during reserve with a select count(*) fromTEST_SCHEMA.TEST_TABLE
an
d failed:
>
<Jul 31, 2002 9:03:26 PM PDT> <Info> <JDBC Pool test><javax.transaction.xa.XAExc
eption
atoracle.jdbc.xa.OracleXAResource.disallowLocalTxnMode(OracleXAResource
java:1045)
atoracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:15
3)
atweblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
atweblogic.jdbc.common.internal.ConnectionEnv.test(ConnectionEnv.java:9
61)
atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:465)
atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400)
atweblogic.common.internal.ResourceAllocator.reserveWaitSecs(ResourceAl
locator.java:390)
atweblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:163)
atweblogic.jdbc.common.internal.ConnectionPool.reserveWaitSecs(Connecti
onPool.java:117)
atweblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:
1136)
at weblogic.jdbc.jta.DataSource.prepare(DataSource.java:696)
atweblogic.transaction.internal.ServerResourceInfo.prepare(ServerResour
ceInfo.java:1178)
atweblogic.transaction.internal.ServerResourceInfo.prepare(ServerResour
ceInfo.java:422)
atweblogic.transaction.internal.ServerSCInfo.startPrepare(ServerSCInfo.
java:186)
atweblogic.transaction.internal.ServerTransactionImpl.localPrepare(Serv
erTransactionImpl.java:1832)
atweblogic.transaction.internal.ServerTransactionImpl.globalPrepare(Ser
verTransactionImpl.java:1606)
atweblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:217)
atweblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:189)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:278)
atweblogic.ejb20.internal.MDListener.onMessage(MDListener.java:214)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1865)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1819)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> -
Error during connection with teradata
Hi,
We are facing problem during terada connection.
1. Created an DSN for tearadata.
2. Imported tables in rpd.
3. Now when we are updating row in rpd we are getting the error.: Object does not exist.
So where is the error.?
thanks
safter you import the tables into RPD, first check-in changes before updating row counts.
not doing so results in error.
J
-bifacts
http://www.obinotes.com -
Error during configuration of EWA report
Dear Experts,
I am configuring EWA for my Production system. I have maintained the system in SMSY and generated RFC destinations. The RFC check is in GREEN. I have activated the SDCCN in the satellite system. The satellite system is put in Solution. Everything looks correct. However, when i am running any task in SDCCN like "Refresh sessions", "Refresh Service definitions", it fails with the following error:
Refresh of service definitions started from destination SM_SOLCLNT001_BACK
error reading system ID on SM_SOLCLNT001_BACK
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497#Unable to dete
Error refreshing service definitions from destination SM_SOLCLNT001_BACK
Task rescheduled for 20111216101604 ( attempt 0001 )
The RFC is working properly. I recreated the RFC many times but the same error. The RFC check is successful. I have removed all the RFCs and created them again in SMSY but to no avail.
Please help.
Thanks in AdvanceHi,
Did you get chance to check the Remote Login of the RFC and authorizations of the user?
Go to SDCCN of Satellite System.
1. Check the status of Task Processor.
Menu "Goto->Settings->Task Processor"; Check Task Processor Status, make sure its active.
2. Check the Task-Specific Settings
In t-code SDCCN --> Menu "Goto->Settings->Task-Specific" . Check the following under "Session Data Collection".
"Data request->Settings ". Confirm the checkbox is checked for "Allow Approximate Data Collection".
"Maintenance->Settings".
"RFC Destinations->Settings" --> Make sure SOLMAN SID is maintained here along with SOLMAN Back RFC destination.
Also check this note 727998 - Complete Replacement of Service Definitions for SDCC/SDCCN -
Error during connection test for Content Producers in FPN
Hi,
I have a question regarding connection test for content producers in FPN. Please let me explain the scenario,
The portal server (PS1) is in the network domain say "XYZ.com" and we are accessing the portal from different domain say "ABC.com" via browser. We need to configure another portal (PS2) which is in the network domain say "mno.XYZ.com" with PS1 using FPN. We have imported the certificates of portal PS1 (consumer) in PS2 (producer) portal server and done the required trust configurations using VA in PS2 portal server.
Then we created a new content producer object for the PS2 portal (producer) in PS1 portal. But when we did the "Connection Tests" it gets failed with the following error message,
"Could not retrieve the WSDL file; the handshake URL may not exist or may be invalid".
Can any one please tell me why this error message is coming. Is it due to any network connection issue?
Thanks,
Gokul.Hi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian -
Error during connection to https web-service via proxy-server
Hello!
I have created Web Service Proxy using wizard in JDeveloper. Then added some code for authorization on my corporate proxy server.
Then I was trying to connect to two different web services
- first one was HTTP web-service - successful
- second one was HTTPS web-service - failed with error :
<Error> <Net> <BEA-000903> <Failed to communicate with proxy: myproxy/myproxyport. Will try connection target_url/443 now.
java.net.ProtocolException: Server redirected too many times (4)
at weblogic.net.http.HttpsClient.makeConnectionUsingProxy(HttpsClient.java:433)
at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:358)
at weblogic.net.http.HttpsClient.New(HttpsClient.java:527)
at weblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:239)
at com.sun.xml.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:136)
at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:187)
at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:124)
at com.sun.xml.ws.transport.DeferredTransportPipe.processRequest(DeferredTransportPipe.java:121)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
at com.sun.xml.ws.client.Stub.process(Stub.java:272)
at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
at $Proxy30.queryRange(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
at $Proxy31.queryRange(Unknown Source)
at com.volga_dnepr.wsi.fusion.model.sched_mov.SchedMovSoap12Client.main(SchedMovSoap12Client.java:54)
Although if i switch off proxy server everything works perfect (both HTTP and HTTPS web-services).
What could be the problem with?Hi Kenneth,
At the moment, SALT does not support the configuring of an outbound proxy server. I suspect you could use a transparent proxy server, i.e., a proxy server/router combination that proxies outgoing requests, although this isn't something we have tested. My suggestion would be to open a support case and ask for this enhancement. I think it is a reasonable thing for SALT to support.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Error during connecting to the odata service of Employee
Hi Everyone,
When I am calling the employee odata service the following message is coming,
and below error messages are coming in the console,
2014-04-01 17:19:53 Device API logging initialized - DEVICE 2014-04-01 17:19:53 registerResourcePath ('', 'resources/') - sap.ui.ModuleSystem 2014-04-01 17:19:53 URL prefixes set to: - sap.ui.ModuleSystem 2014-04-01 17:19:53 (default) : resources/ - sap.ui.ModuleSystem 2014-04-01 17:19:54 registerResourcePath ('employee_test', './employee_test/') - sap.ui.ModuleSystem 2014-04-01 17:19:56 The following problem occurred: HTTP request failed400,Bad Request,
SY/530Atleast one filter parameter is mandatoryBA93B9E3C3CCF1039D3100155D116802 - 2014-04-01 17:19:56 message: HTTP request failed Response Text:
SY/530Atleast one filter parameter is mandatoryBA93B9E3C3CCF1039D3100155D116802 Status Code: 400 Status Text: Bad Request - 2014-04-01 17:19:56 The following problem occurred: HTTP request failed400,Bad Request,
SY/530Atleast one filter parameter is mandatoryBA93B9E3C3CCF10E9D3100155D116802 - 2014-04-01 17:19:56 message: HTTP request failed Response Text:
SY/530Atleast one filter parameter is mandatoryBA93B9E3C3CCF10E9D3100155D116802 Status Code: 400 Status Text: Bad Request - 2014-04-01 17:19:57 The following problem occurred: HTTP request failed400,Bad Request,
SY/530Atleast one filter parameter is mandatoryBA93B9E3C3CCF1199D3100155D116802 - 2014-04-01 17:19:57 message: HTTP request failed Response Text:
SY/530Atleast one filter parameter is mandatoryBA93B9E3C3CCF1199D3100155D116802 Status Code: 400 Status Text: Bad Request -
And also when I am calling the entity set 'EmployeeCollection' of the odata service it is giving the below error,
Kindly tell me, which will help me to cal the data of the EmployeeCollection entity set of the odata service. How I can connect to that odata with the help of the NetWeaver Gateway? And why this errors are coming? Do I need any authorization from our HR team of our company to connect to this odata service to retrieve data or the data should come automatically?
Regards,
SoumyaTo understand the error,
1.go to developer console in chrome by pressing F12.
2. Next go to network tab and refresh the application by pressing F5.
3.In the network tab you will see an OData service call being fired to fetch Employee collection data. 4.Right click on the call and open it in a new tab. There you can see the actual error message.
From the error you have posted it looks like, the Entity collection expects atleast one filter condition to be passed while calling the collection. Calling the Entity collection without any filter is equivalent to 'SELECT *' without any WHERE clause. However in this case the particular service enforces a where clause by specifying a $filter option. If no $filter is supplier it raises an exception which you get here. -
Javamail 'NoSuchMethod' error during connect
Code JDC Tech Tip "RETRIEVING MAIL WITH THE JAVAMAIL API" (http://java.sun.com/developer/JDCTechTips/2002/tt0122.html#tip1):
import java.io.*;
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
public class Fetch {
public static void main (String args[])
throws Exception {
String host = args[0];
// Get system properties
Properties props = System.getProperties();
props.put("mail.pop3.host", host);
// Setup authentication, get session
Authenticator auth = new PopupAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
// Get the store
Store store = session.getStore("pop3");
store.connect();
// Get folder
Folder folder = store.getFolder("INBOX");
folder.open(Folder.READ_ONLY);
// Get directory
Message message[] = folder.getMessages();
for (int i=0, n=message.length; i<n; i++) {
System.out.println(i + ": "
+ message.getFrom()[0]
+ "\t" + message[i].getSubject());
String content =
message[i].getContent().toString();
if (content.length() > 200) {
content = content.substring(0, 200);
System.out.print(content);
// Close connection
folder.close(false);
store.close();
System.exit(0);
The authenticator class is runs through fine, but when it tries to connect I get the following error:
java.lang.NoSuchMethodError: javax.mail.Session.getDebugOut()Ljava/io/PrintStream;
at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:160)
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:102)
at javax.mail.Service.connect(Service.java:246)
at javax.mail.Service.connect(Service.java:131)
at javax.mail.Service.connect(Service.java:87)
at Fetch.main(Fetch.java:21)
The mail jars are in both my <Java home>\hre\lib\ext and <JRE home>\lib\ext directories, and I can see the getDebugOut() method described in the same javax.mail.Session class that was used to build the Fetch class. Using J2SE V1.4.2 and Javamail V1.3.1 / JAFafvaa.Any help you folks can offer with this problem would be greatly appreciated. Thanks in advance!OK, SUE, I forgot to change the host name to my POP server. Did that and now I'm getting:
javax.mail.AuthenticationFailedException
at javax.mail.Service.connect(Service.java:252)
at javax.mail.Service.connect(Service.java:131)
at javax.mail.Service.connect(Service.java:87)
at Fetch.main(Fetch.java:21)
I've used two ID's that I have under Yahoo, both of which work w/Outlook Express and and the Yahoo web portal. Any ideas what's wrong here? -
ORA-07200 error during connect into system or sys
I have installed ORACLE8i EE on redhat6.2.
Installation was successfull. But when I try
to connect to system or sys user it throws
ORA-07200 Saying sls-sid not defined where as
ORACLE_SID is set in oratab also the database
is up and running.
Can someone provide the solution.
Thanks,
Chandramohan<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chandramohan MUmmachi:
I have installed ORACLE8i EE on redhat6.2.
Installation was successfull. But when I try
to connect to system or sys user it throws
ORA-07200 Saying sls-sid not defined where as
ORACLE_SID is set in oratab also the database
is up and running.
Can someone provide the solution.
Thanks,
Chandramohan<HR></BLOCKQUOTE>
Hi Chandramohan,
I think u should run netasst from ur bin directory and configure ur listner and connect data properly
Check ur tnsnames.ora and listner.ora in network/admin directory in $ORACLE_HOME , i thnk this should help u out.
null -
Cannot connect to the reporting server error
Hi,
When trying to process an application, I get the error : "cannot connect to the reporting server".
We have the BPC application server on a machine and DB, SSAS and SSRS (SQL 2008) on another machine.
We don't have a named instance, we use the default one.
If I connect to http://%SQLServer%/reports, it works.
What could be the problem ?
Thank you in advance.Hi,
we had got the same problem. In the end we:
- Installed RS on the same machine of BPC (Application Server) (please be careful to make a new db if you want to use the same DB Server)
- Configured correctly the server manager to point the new ReportServer
- Edited from SQL Server Management Console the tblAppSetInfo, in order to make the column of the ReportServer of all Application Sets to point to the new report server.
- (not sure was needed) rebooted and restarted all the services
- Tested it and it worked!
HTH
Daniele Tiles -
Solman_admin password changes results in errors during managed system setup
Hello all,
I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
Currently I have 6 messages at SAP, but no solution yet.
Situation:
Solman 4.0
SAP_BASIS 701 0003
SAP_ABA 701 0003
ST-PI 2008_1_700 0000
PI_BASIS 701 0003
SAP_BW 701 0003
CRMUIF 500 0001
SAP_AP 700 0014
BBPCRM 500 0013
CPRXRPM 400 0014
BI_CONT 704 0002
ST 400 0019
ST-A/PI 01L_CRM570 0000
ST-ICO 150_700 0016
ST-SER 701_2008_2 0002
So, it is uptodate.
The problem:
Changing the solman_admin password results in errors during connecting a managed system.
In the inital setup the solman_admin is created with a pasword.
After the basic setup I setup some managed systems.
In the meantime I had to change the password of solman_admin
I am logged in with solman_admin and do solman_setup to setup the managed system.
During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
This is the logging:
Step SSO Details
Found SID for SSO ACL entry : MSD
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
!! Exception : Password logon no longer possible - too many failed attempts
A failure occured while importing ABAP SSO ticket certificate in ABAP stack
!! Exception : java.lang.NullPointerException
Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
Anyone else has this problem?
gr
SanderJust for clarification it's Solman 7.0 EHP1 correct?
Also you may want to unlock the following user:
localhost sys=70 client=300 user=SOLMAN_ADMIN
Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
Hope this helps, please let me know and we can go from there.
Maybe you are looking for
-
Using thunderbolt to firewire adapter for target disc mode
I need to transfer several GB of data from a 2011 iMac running OS 10.6 to a new Mac Mini running OS 10.9. Can I connect the older iMac to the newer Mini with a Thunderbolt to Firewire adapter and boot the iMac into Target Disc Mode and transfer the d
-
I was in Disk Utility earlier today and ran the "verify disk" feature, which told me I needed to Repair my disk because it was corrupted. It told me to restart from my install disc. When trying to boot from the disc, the screen will stay at the Apple
-
I have itunes open, but it still wont show up in iMovie.
i click on itunes to add music to my short film, but it will not work, it says to open itunes and i do, and the music shows up and plays in itunes, but will not appear in imovie i have tried several times with no success. I have iMovie 11' by the way
-
Hi, I would create an email template with an image embedded. I created the email template with outlook on my PC. The body is the following. <body lang=EN-US link=blue vlink=purple><div align=right style='text-align:right'><!--[if gte vml 1]><v:shapet
-
Problem in filtering when we use navigation link
Hi all BI Gurus, I am having one problem can anyone please help me to come out of it. Here is my problem, I created two reports. The first one gives you basic idea and the second one give you more detail related to first report. e.g. First Report is