Error during connection test for Content Producers in FPN

Hi,
I have a question regarding connection test for content producers in FPN. Please let me explain the scenario,
The portal server (PS1) is in the network domain say "XYZ.com" and we are accessing the portal from different domain say "ABC.com" via browser. We need to configure another portal (PS2) which is in the network domain say "mno.XYZ.com" with PS1 using FPN. We have imported the certificates of portal PS1 (consumer) in PS2 (producer) portal server and done the required trust configurations using VA in PS2 portal server.
Then we created a new content producer object for the PS2 portal (producer) in PS1 portal. But when we did the "Connection Tests" it gets failed with the following error message,
"Could not retrieve the WSDL file; the handshake URL may not exist or may be invalid".
Can any one please tell me why this error message is coming. Is it due to any network connection issue?
Thanks,
Gokul.

Hi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian

Similar Messages

Error during connection test in C4C

Hi,
during connection test in C4C i receive Service-Ping-Error: Internal Server Error (500).
The following error shown in HCI.
Inbound processing in endpoint at https://iflmapgbt104xxxxavtaio-xxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
Message Processing Log{
IntermediateError   = true
MessageGuid         = AFUUKFubmbS4sE_0LvLxGiXTI0v4
Node                = xxxxxxxx.od.sap.biz
OverallStatus       = FAILED
StartTime           = Thu Mar 26 15:40:11 UTC 2015
StopTime            = Thu Mar 26 15:40:11 UTC 2015
Children [
    An error has occurred in CXF Inbound Request{
      Error               = Inbound processing in endpoint at https://iflmapgbt104xxxxxavtaio-xxxxx.intaas.hana.ondemand.com/cxf/COD/ERP/SimpleConnect failed with message "Error reading XMLStreamReader.", caused by "WstxEOFException:Unexpected EOF in prolog
at [row,col {unknown-source}]: [1,0]"
      StartTime           = Thu Mar 26 15:40:11 UTC 2015
      Status              = FAILED
Can anyone help me on this issue?
Cheers
Florian

Hi Ginger,
somehow, yes :-) I deployed the iFlow for customer master replication. After creating a customer the trace looked different and terminated at the reverse proxy. So the simple connect somehow is not able to do the same...
Cheers
Florian

Error during connect to the instance Content Server MAXDB-XSERVER Receive

We rebooted this mornning a PROD Instance with SAPDB!
Second Instance is a Content Server. Now, we got an error during connect via
DBM Gui to Maxdb 7.6.06.04
2011-08-19 10:06:32 577 ERR 11926 XSERVER Receive packet, Ref:8 - socket recv error (110:Connection timed out
Environment variable : 1. Insctance PROD
2. Instance Prod Content Server
We couldnt connect to the database Instnce via DBMgui and also DB50 all collected data are visible, but its possible to start
DBACOCKPIT, analyse DB analyser : Message
Info Size of data cache 260306 pages, 99.98% in use, size of converter cache 1762 pages
Its seems so regarding to the Info of DB Analyser: Instance CSP (sap1) is up since 2011-06-10 12:20:10 that the Content server
didnt recognize that there was a boot this morning!!
In DBACOCKPIT it seems to be o.k. ! We could not boot the PROD Host asap again, because of the maintenance time window!
Where we could check more featur. of the content server. The processes seems to be o.k.!

> Near the same problem occurs on our backup content server MAXDB!
> The backup runs during this situation a expanded longer time as normal. I get in DBM Gui today always the error code -4 socket recieve error, the Icon goes green, but there isnt any possibility to analyse the check area -> Diagnosis Files, to improof the status via gui! Via tc DBACOCKPIT i could connect to the instance and get some data! For example, If i try to stop the DB analsyser, its not possible.
I would stop the full gui and also end all dbm*.exe processes in the task manager and start it new.
Markus

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

Error during connecting to BW reports

Hi everybody!
I have a problem with my EP. I need to execute a BW report in *Business Package component* for assets.
When i try to use this report I have this error message:
Unknown system 'Only SAP R/3 system are supported currently'.
I've configured a connection to my BW system (I've defined a new system in --> system administration, System configuration).
When i try to the connection test (SAP Web AS Connection, ITS Connection, Connection Test for Connectors) everythig works.
In my BW system definition the object of my BW CONNECTION is defined as System Category: "Like R/3 System" and I can't change this value.
System type is defined as "SAP_BW"
Remote Host Type is defined as "E" (external system)
Please help me to configure the correct access metod to my BW system.
Thanks a lot!
Alex

Hi,
without knowing this business package, could you try to change the system type to SAP_R3. The error could mean that the BP is expecting a R3 system and no BW system.
So if it retrieves the information from the System type attribute changing this setting might help.
Just a guess...
Regards,
Holger.

Connection test for connectors(SAP R3 system) fail

Hi,
I got an EP system and connected to one existing R/3 system.For the same i have defined it in system landscape of EP.System administration ---> system configuration ---> system landscape.In property editor i have deined all the min required properties.
Application Host       172.16.3.68
Gateway Host            172.16.3.68
Gateway Service        sapgw00
Logical System Name    ISCCLNT100
Remote Host Type       3
SAP Client            100
SAP System ID (SID)    ISC
SAP System Number      00
Server Port            3200
System Type            SAP_R3
Trace Mode             1
The system intially works fine.But when
1)There are more users it gives connection error.
2)If there are not much users then also After some time it automatically shows connection error.
Then when I do Connection Test for Connectors,it shows "X" failed.
What I usally try to do,I restart the SQL server.
But this method does not work.I have to restart the EP.Then again the system works fine.
I think there are something wrong input in the property value of SAP R3 object setting.
Hey folks can u please help me in sorting out this problem?Why such connection error happens again and again?

Hi Rajeev,
Thanks for your answer.Actaully I have miss interpreted the problem.Sorry Problem is not with in the SAP R3.
Connection problem is like this::
I have defined a system EPSQL(system alias for MS SQL sever DB) for my EP instance
To connect to database.
The connection tests to the alias is ok.
But as more and more users try connecting to the db the connection test fails.
Restarting the SQL server doesnt help.
I have to restart the EP instance to get over the problem
I think there are something wrong input in the property value of object setting.or,EP maintains some timeout or max user info...
Do u have any solution?

Prob in IR :Internal error during bean lookup for bean RepObjectAccessBean

Hi,
I am facing the problem in IR .
<b>Internal error during bean lookup for bean RepObjectAccessBean</b>
is the Error window I am getting frequently, After getting this error, It is no allowing to open any of the IR Objects.
Thanks in advance,
Dhanabal T

Hi Dhanabal,
i got the same error. But it is clear.
Please chek once ur configuration part. The error is in configuration part only.
once check all the steps in ur configuration part.
REgards,
chandra.

Error during material determination for sales document item - RRB

Hi
Iam getting following error when trying to create a billing request using DP91.
Error during material determination for sales document item 40001560/000010
Message no. AD01155
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
Material origin is checked in costing tab in material master.
Appreciate help in resolving this.
thanks,
Vaishnavi

Hi Vaishnavi
The error which you are getting is related to costing.So kindly reach your FI Consultant
please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
ERROR AT DP90 TRANSACTION
Regards
Srinath

In DP50 Error during material determination for service order

Hi,
While doing Resources-Related Billing request,the following error is displaying..
Kindly Help
Error during material determination for service order
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
501384
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Thanks,
Mohit

Hi mohit,
You need to check DIP profile setting if profile is attached to your order type or not please check this
Thanks and regards
Sachin Kadam

Error during availability check for order

Hi PM experts,
How can I make below warning message (W) to an error message (E)?
Message no: CO820 (Error during availability check for order)
Regards,
Nizam
PM Consultant

Hi,
you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
Hope availability check rule is maintained on material master.
Hope it helps.
Regards,
N.Nagaraju

'Error during import of clipboard contents' runing from ITS server

Dear Friends,
when I execute the report and smartform program from ITS server it is giving a error message 'Error during import of clipboard contents' in the web page.
Please guide me how to resolve this issue.
Thanks & Regards
Tapas Dutta

Hi Victor,
Good Morning.
Can you please confirm you are installing new SAP NW Java system on the same host where SAP NW ABAP is running or you are trying to install SAP NW JAVA as addin installation to existing SAP NW ABAP?
Regards
Naveen Garg

Error during TREX indexing for WPC content

Hello,
I have setup TREX to search Web Page Composer content. I am getting folowing error below during the indexing for WPC content. Any help would be great.
thanks
Jaish
[3508] 2008-08-11 15:19:19.842     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 8002)
[3508] 2008-08-11 16:39:06.196     e     preprocessor     Preprocessor.cpp(01167) :     HTTPHEAD failed for URL http://sjcsapqapt.datadomain.com:50300/irj/servlet/prt/portal/prtroot/docs/guid/80fa1c8c-1b4a-2b10-38ab-b20f54134ca1?prtmode=trex with Httpstatus 500
[3508] 2008-08-11 16:39:06.212     e     preprocessor     Preprocessor.cpp(03957) :     HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)

there was problem with Index creation the way I was creating it.

6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)

What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

Error in Connection Test when connecting to R/3

Hi All,
Although I am able to connect to the R/3 server through the portal (SAP screen is visible and the transactions are running,) the Connection Test fails at the second step i.e. the Connector settings and User Mappings. I have checked these settings and they appear to be fine.
The Test connection results are as follows:
a> Retrieval of default aliases successful.
b> Connection Failed. Make sure User Mapping is set correctly and all connection properties are correct.
I am also unable to connect to the data source through the Visual Composer. Although the systems are visible, the Bapis are not retrieved. It returns the same error. I have even installed the Portal Add-ons for Visual Composer.
Please help.
Regards,
Deepak.

Hi Guys,
Thanks to you all for the suggestions. Rajiv, the settings are as per your suggestions, yet its not working. Also, we are using UIDPW method to logon to the R/3 system. We are able to connect to the R/3 system through the portal and even the transactions are running. The problem is when we test the connection. It fails on step 2. The problem this is causing is that we cannot connect retrieve the data from the R/3 system through Visual Composer. We can connect to the portal thru it though and even the systems are available. But once we select the system and try to retrieve the BAPIs, it throws an error.
We are using EP6.0 SP9 and Visual Composer 6.0 Patch 5.
Regards,
Deepak

Endpoint Protection error: The source folder for content does not exist.

I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!

Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:47 AM   5920 (0x1720)

Error during connection test for Content Producers in FPN

Similar Messages

Maybe you are looking for