Error during creation of entry sheet via BAPI

Hi all,
I have a problem with that bapi and that user exit. I can create a entry sheet with the bapi BAPI_ENTRYSHEET_CREATE and get it accepted using the flag BAPIESSRC-ACCEPTANCE of the header.
But if i use the enhancement SRVEDIT in order to do a custom validation i get the following error during the creation of the entry sheet: "E SE 214 Error during update".
Even if i don't do anything in the user exit (only activate it) i still get the message "Error during update". Anybody knows if there is a problem with that user exit? should i do something specific to use that user exit (it doesn't exist any documentation for the user)
Anybody has solved the issue? Anyone knows another user exit to use in the moment of save the changes of the entry sheet?
Many thanks in advance
Aaron

Hi John,
Some of the structures you have to fill for the IDOC belongs to a  referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.                                                                               
When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to  specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.                                                 
Regards Bernhard

Similar Messages

  • Date error during creation of asset master using bapi

    Hi All,
    Am creating asset master using BAPI_FIXEDASSET_OVRTAKE_CREATE ,,
    but am getting date problem while passing value  '21022005'  ( or any date )  in the format  'ddmmyyyy' 
    the error says 'the capitalization date is invalid' ....
    the capitalization date is under  the structure BAPI1022_FEGLG002 of the above mentioned bapi....
    even i have tried using '21.02.2005' its still not working as the capitalization date is 8 char...
    kindly help me out with the possibilities
    thanks
    john

    Hi John,
    Some of the structures you have to fill for the IDOC belongs to a  referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.                                                                               
    When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to  specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.                                                 
    Regards Bernhard

  • Error while creating service entry sheet

    Hi Experts,
    I am trying to create service entry sheets using bapi 'BAPI_ENTRYSHEET_CREATE'  for a purchase order with multiple line items. The bapi creates SES for the first line item but gives error 'User xxxxxx already processing purchase order nnnnnnnnnn' for the rest of all. Tried using 'COMMIT AND WAIT' after bapi call but it's not working.
    Kindly help me out with the solution.
    Regards,
    B.Siddhesh

    Hi Siddhesh,
    Please use below code before calling the 'BAPI_ENTRYSHEET_CREATE' to unlock the PO.
    Hope this is helpful.
    **Delete the Lock objects EKKO Header PO.
         CALL FUNCTION 'ENQUEUE_READ'
           EXPORTING
             GNAME  = 'EKKO'
             GARG   = ''
             GUNAME = SY-UNAME
           TABLES
             ENQ    = ENQ
           EXCEPTIONS
             OTHERS = 0.
         IF NOT ENQ IS INITIAL.
           DESCRIBE TABLE ENQ LINES SY-TFILL.
           CHECK SY-TFILL > 0.
           CALL FUNCTION 'ENQUE_DELETE'
             EXPORTING
               SUPPRESS_SYSLOG_ENTRY = 'X'
             IMPORTING
               SUBRC                 = RC
             TABLES
               ENQ                   = ENQ.
         ENDIF.
    **Delete the Lock objects EKPO Header PO.
         CALL FUNCTION 'ENQUEUE_READ'
           EXPORTING
             GNAME  = 'EKPO'
             GARG   = ''
             GUNAME = SY-UNAME
           TABLES
             ENQ    = ENQ
           EXCEPTIONS
             OTHERS = 0.
         IF NOT ENQ IS INITIAL.
           DESCRIBE TABLE ENQ LINES SY-TFILL.
           CHECK SY-TFILL > 0.
           CALL FUNCTION 'ENQUE_DELETE'
             EXPORTING
               SUPPRESS_SYSLOG_ENTRY = 'X'
             IMPORTING
               SUBRC                 = RC
             TABLES
               ENQ                   = ENQ.
         ENDIF.
    Reward if helpful.
    Regards,
    Shakeel Ahmed

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

  • Error during Creation of Product Group

    Hi experts
    I am getting below error during creation of Product Group MC84,
    how to solve this
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) ->Locking Material Master Records.

    Hi,
    Please refer the below thread,
    PRODUCT GROUP
    Regards,
    Senthilkumar

  • Error during creation of user

    Hi!
    I am using USERS_GEN to generate a user in organizational structure from an existing SU01 user. When I first did this it worked fine. After that we removed the user from the org.structure. Now when we try to generate it again from USERS_GEN we get the message "Error during creation of user....central person already exists".
    When I look at that CP I see that is already exists. I need to create a position under an org. unit and I need the already created CP to be allocated to that position.
    How do I do that?
    Sincerely
    Anders Öhrling

    Hi
    Which SRM version are you in ?
    However you can delete the CP  via  Function module HR_CENTRALPERSON_DELETE but this central persons are stored in HRP1001 table .
    regards
    Muthu
    Edited by: Muthuraman Govindasamy on Sep 9, 2008 12:56 PM

  • Error while saving service entry sheet

    Hi Gurus
    I m getting the following error while saving service entry sheet
    Account determination for entry MGCA WRX not possible
    Req. for help
    Eldee

    Hi,
    Use T.code:OMWB,
    Enter Chart of Account,Now you will have new screen,
    Click WRX, sys will take to new screen
    Click Rules,select check box of debit and credit only and save.
    Now enter you G/L accounts(GR/IR) in debit and credit field and save.
    Now try your transaction.
    If helpful to you then reward.
    Regards,
    Biju K

  • Installation error during creation of user SAPJSF

    Hello,
    i'm performing SOLMAN installation and the installation stops in "Import Abap" step with problem creating the SAPJSF user. Several posts regarding the same error did not helped. When the sapinst is trying to create the SAPJSF user, i notice that the DB2 service in Windows services changes from "started" to "stopped"
    OS:windows 2003 enterprise 64bit
    DB:db2 udb
    SOlman: 7.0 including EHP1
    The error from "sapinst.log":
    WARNING 2010-09-17 10:32:40.906
    Execution of the command "I:\usr\sap\SOF\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install" -c sysnr=00 -c ashost=fmgrsolman -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code 4. Output:
    Sep 17, 2010 10:30:29... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
    Sep 17, 2010 10:30:30... Info: Connected to backend system SOF client 001 as user DDIC
    Sep 17, 2010 10:30:30... Info: Called for user SAPJSF
    Sep 17, 2010 10:30:30... Info: Formal password check successful
    Sep 17, 2010 10:30:30... Info: Will create user SAPJSF
    Sep 17, 2010 10:31:38... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
    Sep 17, 2010 10:32:40... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
         at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
         at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
         at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
         at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
         at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
         at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:331)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Sep 17, 2010 10:32:40... Info: Leaving with return code 4
    The error from "UserCheck.log":
    Sep 17, 2010 10:36:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
    Sep 17, 2010 10:36:59... Info: Connected to backend system SOF client 001 as user DDIC
    Sep 17, 2010 10:36:59... Info: Called for user SAPJSF
    Sep 17, 2010 10:36:59... Info: Formal password check successful
    Sep 17, 2010 10:36:59... Info: Will create user SAPJSF
    Sep 17, 2010 10:37:59... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
    Sep 17, 2010 10:38:56... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
         at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
         at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
         at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
         at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
         at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
         at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:331)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Sep 17, 2010 10:38:56... Info: Leaving with return code 4
    Edited by: DimitrisDimas on Sep 20, 2010 5:38 PM

    hi
    wat s ur JDK version??
    please refer this,
    [SAPJSF - no password for user - ECC6 - IDES|SAPJSF - no password for user - ECC6 - IDES]
    jansi

  • Travel Expense - Posting run error - Error during creation of posting run

    Hi Guru's,
    Look forward for your insights. Here you go with my question.
    We are implementing Expense Mgt with Portal with out scope for payroll in SAP.  I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
    Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
    When I try to create posting run under transfer to accounting, I get following error
    Error during creation of posting run number (->PR1
    Message no. 56840
    I'm not sure why this error was popping up. Appreciate your suggestion.
    Regards
    Praveen.N

    Hi,
    Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
    So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
    Pls maintain it as vendor and see if the errors are still coming.
    Rakesh

  • Standalone Scenario - Error during Creation of Local Purchase Order

    Hi All,
         I am trying to setup Standalone Scenario, i have created all the master data locally, i am able to Order SC, but after workflow approval SC goes into error 'Error during creation of local purchase order from shopping cart XXXXXXXXX'
         I have created following configuration setting for local PO number
    1) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Number rang. for Schopping Carts and Follow-on Doc. --- i have number ranges for PO follow-on doc. i.e.
    inrerval No = PO, from number = 0004000000, to number = 0004999999, ext. = unchecked
    2) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Ranges per backend system for follow-on documents PO, PR etc
    3) In sourcing (SPRO -> Cross-Application Basic Settings -> Sourcing -> Define Interactive Sourcing for product categories) ---  sourcing is never carried out.
    Can anybody help?
    Regards,
    SAP Guy.
    Edited by: SAP Guy on Apr 23, 2008 2:32 AM

    Hi SAP Guy,
    Following steps are must for Local number range
    1) Create number range for local PO
    2) Maintain your logical system in 'Define number range per backend system for follow on document'
    3) Define Transaction Type for BUS2201, define document type (e.g. EC1)
    4) Assign Document type (EC1) in Org attribute BSA.
    Hope this helps.
    Regards,
    Manish.

  • Error during creation of transfer orders for mateRIA

    hi gurus,
    I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
    "Error during creation of transfer orders for mateRIAL.how to correct the error.
    regards
    murugan

    Hi,
    The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
    Regards,
    raghu

  • Error during creation of info record for pipline material.(Urgent)

    Hi All,
    We are getting the following error during creation of Info record for pipeline material
    " Material XXXXX is not a pipline material"
    we have checked the material master  and found it is a pipeline material.
    Kindly advice on the same.
    Help in any form will be rewarded.
    Best Regards
    Arihanth

    Hi Arahanth,
       The steps u need to check are;
    1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
    2) when u create the info record (ME11) ensure the info category is selected as pipeline.
    Hope its clear to u
    if solved do reward me points
    Regards
    Anil Thai

  • Error during cumulation, No entry found in the table T54C1

    I got the following error message since correcting personal area for retro period
    Error text - "Error during cumulation, No entry found in the table T54C1 Key 03 75 K 2008 01"
    For a personnel number, there was an incorrect org assignment for the  period of May 2009 to June last year.

    Go ahead and generate payroll period for that payroll area and verify control record with payday rule. Thats missing. Use the table number mentioned in msg to crack issue.

  • Error during creation of posting runnumber

    Hello there,
    I am trying to post a trip using transaction PRFI after the trip has been approved and settled and experiencing the error bellow. Two days ago, I was able to perform this transation PRFI and PRRW succesfully. Please advise.
    Leon
    *Error during creation of posting run number (->PR1*
        *Message no. 56840*

    Hi Saathi,
    If you need to post the document to AP, all the employees have to be converted as Vendors using T code PRAA. But this wont be required when you run through payroll. I hope the error occured due to not converting the employee as vendor. Pl check & revert.
    Thanks,
    Nandagopal C

  • Creating Service entry sheet using bapi  BAPI_ENTRYSHEET_CREATE

    Hello Guys,
    I  am trying to create a service entry sheet for single line item only using bapi  BAPI_ENTRYSHEET_CREATE.
    its is creating Service entry document but not populating the line item  for me (here only one line item for me).
    If you guys have sample code (how the poupulate the internal tables)  could you please send it across?.
    Thanks in Advance..
    Steevan

    Hi,
    Creating Service entry sheet using bapi  BAPI_ENTRYSHEET_CREATE
    For creating service entry sheet follow below link and it helps to you.
    http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingServiceEntrySheetusing+BAPI
    Regards,
    Sekhar

Maybe you are looking for

  • Error message on application updater itself

    Friends: I keep getting an error message when I use the applications updater.  The error is on the extension updater (CS6) itself. Adobe Extension Manager CS6 Update Installation failed.   Error Code: U44M1P7 Thoughts? DrWoodhall

  • Print receipt of purchased items

    Hi, With all of the e-Commerce sites like Amazon, and all of the retail dot coms you can always log into your account and print or reprint a purchase. Why is it we cannot do this in the iTunes store? Gary

  • Profit center substitution in Goods issue document

    Hello Gurus I am determining profit center through the profit center substitution in sales order through 0KEM transaction and activated it in 0KEL as activation 3. I have taken the fields as sales organization  and sales office with transaction code

  • IPhoto won't open when iPod is connected. iTunes does, iPhoto has stopped.

    For a while now, when I plug in my iPod 5, iPhoto has stopped opening up, and my device doesn't show up in Image Capture. This has been occurring for several months now, and I would like to import my photos now. Help?

  • My Macbook Air keeps freezing up when i try to download something

    Ok so i am trying to learn how to develop for android and I was trying to download the android studio.  I have the app memory clean on my bar at the top, and when i start downloading the program my memory drops from around 3-4 gb to mb and even kb an