Error during creation of SC by described requirement

Dear Expert,
When I try to create SC through described requirement, I am getting error as "Enter the Company Code".
We are using SRM7.0 Extended Classic Scenario.
The employee has the attribute of Company code is maintained in PPOMA_BBP.
Also we dont have any problem in creating SC by selecting Internal materials and Services.
Can any one give their views on this regard.
Thanks,
B.N.Karthikeyan

Dear Experts,
I have maintained in the extended attributes for all the Product category of the user department with Source system.
But still when I create SC with described requirements I get the error as "Enter the Company Code".
Kindly any one suggest some solution for this issue.
Regards,
B.N.Karthikeyan.

Similar Messages

  • Error during creation of SC with described requirement

    Dear Expert,
    When I try to create SC through described requirement, I am getting error as "Enter the Company Code".
    We are using SRM7.0 Extended Classic Scenario.
    The employee has the attribute of Company code is maintained in PPOMA_BBP.
    Also we dont have any problem in creating SC by selecting Internal materials and Services.
    Can any one give their views on this regard.
    Thanks,
    B.N.Karthikeyan

    Hi,
    please check the following
    1. In the attribute default tick is there for the company code
    2. In the shopping cart default setting check for  the company code
    Regards
    Ganesh

  • Error during Creation of Product Group

    Hi experts
    I am getting below error during creation of Product Group MC84,
    how to solve this
    The field  is defined as a required field; it does not contain an entry
    Message no. MG144
    Procedure
    Transfer a suitable value.
    If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
    Note
    For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) ->Locking Material Master Records.

    Hi,
    Please refer the below thread,
    PRODUCT GROUP
    Regards,
    Senthilkumar

  • Error during creation of posting runnumber

    Hello there,
    I am trying to post a trip using transaction PRFI after the trip has been approved and settled and experiencing the error bellow. Two days ago, I was able to perform this transation PRFI and PRRW succesfully. Please advise.
    Leon
    *Error during creation of posting run number (->PR1*
        *Message no. 56840*

    Hi Saathi,
    If you need to post the document to AP, all the employees have to be converted as Vendors using T code PRAA. But this wont be required when you run through payroll. I hope the error occured due to not converting the employee as vendor. Pl check & revert.
    Thanks,
    Nandagopal C

  • Microsoft sharepoint foundation 2010 encountered an error during setup. One or more required Office components failed to complete successfully

    Dear
    I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
    then to finish the installation get the following message"microsoft
    sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
    Operating System: Windows Server 2012R2
    Prerequisites: OK
    SharepointFoundation 2010sp2
    Many thanksforyour help
    part of LOG:
    01/16/2015 00:37:11  1  INF          Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
    01/16/2015 00:37:11  1  INF          Entering function RegistryHelper.RegistryHelper
    01/16/2015 00:37:11  1  INF            The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
    01/16/2015 00:37:11  1  INF          Leaving function RegistryHelper.RegistryHelper
    01/16/2015 00:37:11  1  INF          Entering function RegistryHelper.GetStringValue
    01/16/2015 00:37:11  1  INF            Entering function RegistryHelper.GetValue
    01/16/2015 00:37:11  1  INF            Leaving function RegistryHelper.GetValue
    01/16/2015 00:37:11  1  INF          Leaving function RegistryHelper.GetStringValue
    01/16/2015 00:37:11  1  INF          The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found.  This means that either
    the server is not joined to a farm or a central admin site has not been created in the farm yet.
    01/16/2015 00:37:11  1  INF          Entering function StringResourceManager.GetResourceString
    01/16/2015 00:37:11  1  INF            Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
    01/16/2015 00:37:11  1  INF            Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
    Application has not been created yet.  To create one, use the SharePoint Products Configuration Wizard.  Do you want to launch the configuration wizard now?
    01/16/2015 00:37:11  1  INF          Leaving function StringResourceManager.GetResourceString
    01/16/2015 00:37:11  1  INF          Entering function PsconfigMessageBox.ShowMessageBox
    01/16/2015 00:37:11  1  INF            Entering function StringResourceManager.GetResourceString
    01/16/2015 00:37:11  1  INF              Resource id to be retrieved is Branding for language English (United States)
    01/16/2015 00:37:11  1  INF              Resource retrieved id Branding is SharePoint Products Configuration Wizard
    01/16/2015 00:37:11  1  INF            Leaving function StringResourceManager.GetResourceString
    01/16/2015 00:37:23  1  INF          Leaving function UserInterface.ShowCentralAdmin
    01/16/2015 00:37:23  1  INF        Leaving function UserInterface.WarmUp
    01/16/2015 00:37:23  1  INF        Entering function TaskDriver.Stop
    01/16/2015 00:37:23  1  INF          Entering function TaskDriver.OnTaskDriverStop
    01/16/2015 00:37:23  1  INF            Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, 
    01/16/2015 00:37:23  1  INF            Entering function TaskDriverStateChange.Enter
    01/16/2015 00:37:23  1  INF              Acquiring the writer lock to change the state
    01/16/2015 00:37:23  1  INF              Current state of the task driver is neverrun.  You want to change it to stoppedrunning
    01/16/2015 00:37:23  1  INF              Changed state of the task driver to neverrun
    01/16/2015 00:37:23  1  INF              Released the writer lock to change the state
    01/16/2015 00:37:23  1  INF            Leaving function TaskDriverStateChange.Enter
    01/16/2015 00:37:23  1  INF            Entering function TaskDriver.FireOnTaskDriverEvent
    01/16/2015 00:37:23  1  INF              Entering function UserInterface.TaskDriverEventHandler
    01/16/2015 00:37:23  1  INF                Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message 
    01/16/2015 00:37:23  1  INF                There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
    01/16/2015 00:37:23  1  INF              Leaving function UserInterface.TaskDriverEventHandler
    01/16/2015 00:37:23  1  INF            Leaving function TaskDriver.FireOnTaskDriverEvent
    01/16/2015 00:37:23  1  INF          Leaving function TaskDriver.OnTaskDriverStop
    01/16/2015 00:37:23  1  INF        Leaving function TaskDriver.Stop
    01/16/2015 00:37:23  1  INF        UnLocking the task driver for exclusive use while warming the driver up
    01/16/2015 00:37:23  1  INF      Leaving function TaskDriver.WarmUp
    01/16/2015 00:37:23  1  INF      Entering function PsconfigApplicationContext.ClosePsconfigApplication
    01/16/2015 00:37:23  1  INF        The psconfig ui application is closing
    01/16/2015 00:37:23  1  INF        We have do not have a main form, thus the application has been told to close prior to showing the ui at all
    01/16/2015 00:37:23  1  INF      Leaving function PsconfigApplicationContext.ClosePsconfigApplication
    01/16/2015 00:37:23  1  INF      Return code indicates a success
    01/16/2015 00:37:23  1  INF    Leaving function PsconfigUserInterfaceMain.Main

    Hi Jose,
    When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
    Run, from admin command prompt:
    Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
    you can read more here:
    http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
    Stacy www.sharepointpapa.com

  • Installation error during creation of user SAPJSF

    Hello,
    i'm performing SOLMAN installation and the installation stops in "Import Abap" step with problem creating the SAPJSF user. Several posts regarding the same error did not helped. When the sapinst is trying to create the SAPJSF user, i notice that the DB2 service in Windows services changes from "started" to "stopped"
    OS:windows 2003 enterprise 64bit
    DB:db2 udb
    SOlman: 7.0 including EHP1
    The error from "sapinst.log":
    WARNING 2010-09-17 10:32:40.906
    Execution of the command "I:\usr\sap\SOF\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install" -c sysnr=00 -c ashost=fmgrsolman -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code 4. Output:
    Sep 17, 2010 10:30:29... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
    Sep 17, 2010 10:30:30... Info: Connected to backend system SOF client 001 as user DDIC
    Sep 17, 2010 10:30:30... Info: Called for user SAPJSF
    Sep 17, 2010 10:30:30... Info: Formal password check successful
    Sep 17, 2010 10:30:30... Info: Will create user SAPJSF
    Sep 17, 2010 10:31:38... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
    Sep 17, 2010 10:32:40... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
         at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
         at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
         at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
         at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
         at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
         at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:331)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Sep 17, 2010 10:32:40... Info: Leaving with return code 4
    The error from "UserCheck.log":
    Sep 17, 2010 10:36:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
    Sep 17, 2010 10:36:59... Info: Connected to backend system SOF client 001 as user DDIC
    Sep 17, 2010 10:36:59... Info: Called for user SAPJSF
    Sep 17, 2010 10:36:59... Info: Formal password check successful
    Sep 17, 2010 10:36:59... Info: Will create user SAPJSF
    Sep 17, 2010 10:37:59... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
    Sep 17, 2010 10:38:56... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
         at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
         at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
         at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
         at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
         at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
         at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:331)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Sep 17, 2010 10:38:56... Info: Leaving with return code 4
    Edited by: DimitrisDimas on Sep 20, 2010 5:38 PM

    hi
    wat s ur JDK version??
    please refer this,
    [SAPJSF - no password for user - ECC6 - IDES|SAPJSF - no password for user - ECC6 - IDES]
    jansi

  • Travel Expense - Posting run error - Error during creation of posting run

    Hi Guru's,
    Look forward for your insights. Here you go with my question.
    We are implementing Expense Mgt with Portal with out scope for payroll in SAP.  I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
    Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
    When I try to create posting run under transfer to accounting, I get following error
    Error during creation of posting run number (->PR1
    Message no. 56840
    I'm not sure why this error was popping up. Appreciate your suggestion.
    Regards
    Praveen.N

    Hi,
    Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
    So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
    Pls maintain it as vendor and see if the errors are still coming.
    Rakesh

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

  • Standalone Scenario - Error during Creation of Local Purchase Order

    Hi All,
         I am trying to setup Standalone Scenario, i have created all the master data locally, i am able to Order SC, but after workflow approval SC goes into error 'Error during creation of local purchase order from shopping cart XXXXXXXXX'
         I have created following configuration setting for local PO number
    1) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Number rang. for Schopping Carts and Follow-on Doc. --- i have number ranges for PO follow-on doc. i.e.
    inrerval No = PO, from number = 0004000000, to number = 0004999999, ext. = unchecked
    2) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Ranges per backend system for follow-on documents PO, PR etc
    3) In sourcing (SPRO -> Cross-Application Basic Settings -> Sourcing -> Define Interactive Sourcing for product categories) ---  sourcing is never carried out.
    Can anybody help?
    Regards,
    SAP Guy.
    Edited by: SAP Guy on Apr 23, 2008 2:32 AM

    Hi SAP Guy,
    Following steps are must for Local number range
    1) Create number range for local PO
    2) Maintain your logical system in 'Define number range per backend system for follow on document'
    3) Define Transaction Type for BUS2201, define document type (e.g. EC1)
    4) Assign Document type (EC1) in Org attribute BSA.
    Hope this helps.
    Regards,
    Manish.

  • Error during creation of transfer orders for mateRIA

    hi gurus,
    I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
    "Error during creation of transfer orders for mateRIAL.how to correct the error.
    regards
    murugan

    Hi,
    The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
    Regards,
    raghu

  • Error during creation of user

    Hi!
    I am using USERS_GEN to generate a user in organizational structure from an existing SU01 user. When I first did this it worked fine. After that we removed the user from the org.structure. Now when we try to generate it again from USERS_GEN we get the message "Error during creation of user....central person already exists".
    When I look at that CP I see that is already exists. I need to create a position under an org. unit and I need the already created CP to be allocated to that position.
    How do I do that?
    Sincerely
    Anders Öhrling

    Hi
    Which SRM version are you in ?
    However you can delete the CP  via  Function module HR_CENTRALPERSON_DELETE but this central persons are stored in HRP1001 table .
    regards
    Muthu
    Edited by: Muthuraman Govindasamy on Sep 9, 2008 12:56 PM

  • Error during creation of info record for pipline material.(Urgent)

    Hi All,
    We are getting the following error during creation of Info record for pipeline material
    " Material XXXXX is not a pipline material"
    we have checked the material master  and found it is a pipeline material.
    Kindly advice on the same.
    Help in any form will be rewarded.
    Best Regards
    Arihanth

    Hi Arahanth,
       The steps u need to check are;
    1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
    2) when u create the info record (ME11) ensure the info category is selected as pipeline.
    Hope its clear to u
    if solved do reward me points
    Regards
    Anil Thai

  • Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

    Hi,
    I got the below error while installing share point 2010 on Windows 7 OS.
    Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
    Trouble shooted by following link as below
    http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
    But still i am facing the same issue.Please share your inputs to cross this issue.
    Regards,
    Sudheer
    Thanks & Regards, Sudheer

    Hi,
    I selected Server Farm Mode,stand alone.
    Post that installation went fine.
    Regards,
    Sudheer 
    Thanks & Regards, Sudheer

  • Error during creation of application entity for the plug-in.

    Hi Experts,
    As part of creating Content Database source for SES....
    We,
    1 Activated the Oracle Internet Directory identity plug-in for the Oracle Content
    Database instance.
    2) However after activating Identity plug-in for Oracle Internet Directory.... ......... we used the csPlugin.ldif file to create an application entity for the plug-in by running the following command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" ....but in the process executing the above command.... getting the following error(we gave correct login details):
    SASL/DIGEST-MD5 authentication started
    ldap_sasl_interactive_bind_s: Invalid credentials (49)
    How can i resolve this.
    I have another query...in the command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" which user name should i specify..... is it "cn=oracle" or "cn=orcladmin"
    Thanks
    peter.

    Hi Raford,
    Thanks for your reply.
    We tried to create Content Database Source with the details we have...
    However in this process getting an exception....
    11:20:20:778 INFO     main          
    11:20:20:784 INFO     main          Oracle Secure Enterprise Search, Crawler: Release 10.1.8.2
    11:20:20:785 INFO     main          Copyright © 2006, 2007, Oracle. All rights reserved.
    11:20:20:785 INFO     main          
    11:20:20:785 INFO     main          ================== Crawling settings ==================
    11:20:20:785 INFO     main          Reading configuration file from /mnt/u08/SOADEVIL/seshome/search/data/config/crawler.dat
    11:20:20:785 INFO     main          Agent = Oracle Secure Enterprise Search
    11:20:20:807 INFO     main          User = EQ_TEST
    11:20:20:807 INFO     main          Database connect string = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=devilrays.appsassociates.com)(PORT=1525))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Devilses.devilrays.appsassociates.com)))
    11:20:20:807 INFO     main          Source type is User-defined
    11:20:20:807 INFO     main          Source is "BJ_Cont"
    11:20:20:807 INFO     main          Document access control policy is user-defined
    11:20:20:808 INFO     main          Number of crawling threads = 5
    11:20:20:808 INFO     main          Queue table = I1S8
    11:20:20:808 INFO     main          URL table = EQ$URL
    11:20:20:808 INFO     main          Maximum documents to crawl = no limit
    11:20:20:808 INFO     main          Maximum depth to crawl = 2
    11:20:20:808 INFO     main          Document size limit = 10M
    11:20:20:808 INFO     main          Locale of the crawler message is "en_US"
    11:20:20:808 INFO     main          URL exclusion rule = (?i:(?:\.gif)|(?:\.jpg)|(?:\.jar)|(?:\.tif)|(?:\.bmp)|(?:\.war)|(?:\.ear)|(?:\.mpg)|(?:\.wmv)|(?:\.mpeg)|(?:\.scm)|(?:\.iso)|(?:\.dmp)|(?:\.dll)|(?:\.cab)|(?:\.so)|(?:\.avi)|(?:\.wav)|(?:\.mp3)|(?:\.wma)|(?:\.bin)|(?:\.exe)|(?:\.iso)|(?:\.tar)|(?:\.png))$
    11:20:20:808 INFO     main          URL exclusion rule = \?.*(.*\+)\1{3}
    11:20:20:812 INFO     main          Document read timeout threshold = 30 second(s)
    11:20:20:812 INFO     main          Crawler default character set is "8859_1"
    11:20:20:812 INFO     main          Crawler default language is "en"
    11:20:20:813 INFO     main          Auto language detection is on
    11:20:20:813 INFO     main          Auto character set detection is off
    11:20:20:813 INFO     main          Document service pipeline is "Default pipeline"
    11:20:20:813 INFO     main          Verbose mode is on
    11:20:20:935 INFO     main          Caching on: directory = /mnt/u08/SOADEVIL/sesdata/Devilses/cache/I1DS8/, max size = 250, action = SES_TASK
    11:20:20:935 INFO     main          Filtering on: filter path = /mnt/u08/SOADEVIL/seshome/ctx/bin/ctxhx, number of filters = 2
    11:20:20:935 INFO     main          MIME inclusions = text/html text/plain application/pdf application/x-msexcel application/vnd.ms-excel application/ms-excel application/x-mspowerpoint application/vnd.ms-powerpoint application/msword
    11:20:20:935 INFO     main          URL table attributes = url, depth, signature, last_modified, status, url_id, access_url, enqueue_status, TITLE, DESCRIPTION, AUTHOR, CRAWLED_DATE, CONTENT_LENGTH, CONTENT_TYPE, LANG, CACHE_FILE_PATH, DS_ID
    11:20:20:936 INFO     main          SQL callback statement is "begin eq_crw.crawler_callback(?,?,?,?); exception when eq_def.search_error then eq_err.raise; when others then eq_err.raise; end;"
    11:20:20:936 INFO     main          Cookie support is enabled
    11:20:20:937 INFO     main          Maximum number of cookies = 300
    11:20:20:939 INFO     main          Maximum number of cookies per host = 20
    11:20:20:939 INFO     main          Maximum size of cookie = 4096 bytes
    11:20:20:940 INFO     main          Cache file deletion is disabled
    11:20:20:940 INFO     main          Crawler plug-in manager class is "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
    11:20:20:940 INFO     main          SQL hook ID is "8"
    11:20:20:940 INFO     main          SQL command hook statement is "begin ? := eq_crw.crawler_get_command(?,?,?,?); end;"
    11:20:20:940 INFO     main          SQL response hook statement is "begin ? := eq_crw.crawler_send_response (?,?,?,?,?,?,?,?,?,?,?,?,?); end;"
    11:20:20:940 INFO     main          Crawler launched by schedule "BJ_Cont"
    11:20:20:940 INFO     main          
    11:20:20:940 INFO     main          =================== Crawling status ===================
    11:20:20:941 INFO     main          Crawling started at 9/18/07 11:20 AM
    11:20:21:912 INFO     main          URL manager connecting to Oracle...
    11:20:21:974 INFO     main          connected
    11:20:22:586 INFO     main          Queue manager connecting to Oracle...
    11:20:22:631 INFO     main          connected
    11:20:23:497 INFO     main          Invoking "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
    11:20:23:501 INFO     main          URL manager connecting to Oracle...
    11:20:23:529 INFO     main          connected
    11:20:23:531 INFO     main          Initializing crawler plug-in manager "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
    11:20:23:531 ERROR     main          SES keystore location: null
    11:20:23:532 ERROR     main     null oracle.search.sdk.crawler.PluginException     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479     oracle.search.crawler.WebCrawler:begin:1076     ImtCrawler:run:1831     ImtCrawler:main:480
    11:20:23:532 ERROR     main     null oracle.search.sdk.crawler.PluginException     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479     oracle.search.crawler.WebCrawler:begin:1076     ImtCrawler:run:1831     ImtCrawler:main:480
    11:20:23:676 INFO     Thread-1          Remote command "reportstatistics" received, argument = "quit"
    11:20:23:676 INFO     Thread-1          Executing remote command "reportstatistics"
    11:20:23:697 INFO     Thread-1          Send back remote command execution result
    11:20:25:944 INFO     main          Shutting down all crawling threads...
    11:20:25:948 INFO     main          
    11:20:25:949 INFO     main          =================== Crawling results ===================
    11:20:25:949 INFO     main          Crawling started at 9/18/07 11:20 AM
    11:20:25:949 INFO     main          Crawling stopped at 9/18/07 11:20 AM
    11:20:25:949 INFO     main          Total crawling time = 0:0:5
    11:20:25:949 INFO     main          
    11:20:25:954 INFO     main          Total number of documents fetched = 0
    11:20:25:954 INFO     main          Document fetch failures = 0
    11:20:25:954 INFO     main          Document conversion failures = 0
    11:20:25:954 INFO     main          Total number of unique documents indexed = 0
    11:20:25:954 INFO     main          Total data collected = 0 bytes
    11:20:25:954 INFO     main          Total number of non-indexable documents = 0
    11:20:25:955 INFO     main          
    11:20:25:955 INFO     main          Number of times disk cache is full = 0
    We have followed the installation details provided in "SESAdmiistratorGuide".
    In that guide.... during creation of Content Database source he did not mention any entry for "SES keystore location", and the exception which we are getting is related to "SES keystore location: null" (please look into the exception stack).
    could you please guide us.
    Thanks
    peter.

  • Getting error during creation of recovery point and synchronization

    hi all
    i am using DPM 2012 R2 . i am getting following error during recovery point creation.
    No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
    i have tried " create a recovery point after synchronization"  6-7 times but its failed. 
    kindly help me to get out this issue
    thanks in advance.
    Early reply should be really appreciated.

    hi all
    i am using DPM 2012 R2 . i am getting following error during recovery point creation.
    No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
    i have tried " create a recovery point after synchronization"  6-7 times but its failed. 
    kindly help me to get out this issue
    thanks in advance.
    Early reply should be really appreciated.

Maybe you are looking for

  • IP Phone SSL VPN - Licenses required.

    Hi, Can someone confirm the linceses required for me to get this working. I understand that it needs the 'AnyConnect for Cisco VPN Phone' license but do I also need to have anyconnec essentials? This is for ASA version 8.2 and the a license info belo

  • MacBook and 10.6.8 wifi issues

    I have a MacBook 1,1 and still encounter connectivity issues with my WiFi when I attempt to upgrade to 10.6.8 I have re-installed 10.5.8 and have absolutely NO problems with WiFi connectivity, however, when I install 10.6.8 I cannot remain connected.

  • Can you open a keynote presentation in PowerPoint and vice versa?

    I've opened a powerpoint presentation in Keynote but had trouble opening a Keynote in Powerpoint.  I wasn't sure if it was just that particular keynote or is does it just not work.  I know some formatting sometimes get lost.  What's the quality like

  • Airplay to Apple TV

    Hi guys I have 2 iPads here...one air plays video and audio to my Apple TV and the other only audio. Any advice on how I get this sorted? Thanks

  • Different between adding a subview or visible/invisible it

    Dear all, I would like to create a screen to overlay on the top of an existing UIView. I tested with 3 methods below and it all works. I would like to know how do i determine which method is the best and what are the different among them in terms of