Error during creation of transfer orders for mateRIA
hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan
Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu
Similar Messages
-
Error during creation of transfer orders for material
Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzoyour picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry. -
Error during creation of Purchase Order for Sub-Contract
Hi
i am creating PO for Sub-contract, to check whether it copied the components or not, when i clicked components in material data tab: it says u201CMRP parameters for plant XXXX have not been maintained.
Please guys help me out in this matter. Thanks in advance.
Regards,
KrishnaPlease post in the relevant forum.
-
Error during creation of info record for pipline material.(Urgent)
Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
ArihanthHi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai -
Issue at the time of creation of transfer order for inbound delivery
Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
NikhilHi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale -
Automatic creation of Transfer order for Picking and putaway
Hello All .
I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery) .
thanks
RahulHi
To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
You can find more details on this link
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Thanks & Regards
Kishore -
Create transfer order for material document - 4.6C system
Hi Gurus
Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
Thank you in advance
Regards
SarathSarath,
Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
Thanks again. -
Error while creating a transfer order for delivery note.
Hi Gurus,
I have already created an outbound delivery. I am creating a transfer request as a basis for goods movement in the warehouse and to print the picking list. so i use the path:
Logistics -> Sales and Distribution -> Shipping and Transportation -> Picking -> Create Transfer Order -> Single Document.
Now here i enter the warehouse number, plant, delivery. when i press enter i get error "No items that are to be picked were found".
I went to the following IMG path -- Enterprise Structure --> Assignment --> Logistics-Execution --> Assign Warehouse number to plant/storage location.
Assign the warehouse to the plan and storage location.
Still i get the same error. Could some one help me out here?
Thanks in advance
AmitHi,
can you check whether Warehouse number exists and transfer order creation is required or not at Delivery document under Picking tab -
Issue during creation of Transfer Order
I am trying to create a Transfer Order from a TR but I am getting the follwoin error.
"No destination storage bin to be found in storage type XXX "
I have assigned a storage type to a storage bin and the Putaway strategy exist in material master which is assigned to Storage type XXX.
Please tell me if I am missing any pat of master data or configuration.
Thanks
SAP Fans....Possible cuase:
System is not able to search for any storage bin according to the putaway strategy u have maintained for the storage type.
Run LX03 report and find out list of storage bin in the storage type.
Choose an empty bin and put it manually in the TO. -
Regd : Error during saving the sales order for Variant configuration
Hi -
When the item( config material) is saved in the sales order , system scheduled the production order and getting an error as " Posting Rule for Assembly order for item 000010 could not be generated".
Any solutions regarding the error.Hi,
This is the process of Assembly to order with variant configuration. In material master, you can maintain gen item category 0002 (configurable material) in basic data view, sales 2 view item category grp 0002 and strategy group 82 in MRP 3 view. After creating of material master, BOM & Routing, You can create sales order in VA01 transaction.
In this VA01, When you create sales order, system will check material availability, capacity checking and system will show variants for each items. And also when you will save the sales order, system will create production order no immdiately.
So you can maintain the above settings compulsory.
please let me know any clarification.
Regards,
Mohan -
Error during creation of application entity for the plug-in.
Hi Experts,
As part of creating Content Database source for SES....
We,
1 Activated the Oracle Internet Directory identity plug-in for the Oracle Content
Database instance.
2) However after activating Identity plug-in for Oracle Internet Directory.... ......... we used the csPlugin.ldif file to create an application entity for the plug-in by running the following command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" ....but in the process executing the above command.... getting the following error(we gave correct login details):
SASL/DIGEST-MD5 authentication started
ldap_sasl_interactive_bind_s: Invalid credentials (49)
How can i resolve this.
I have another query...in the command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" which user name should i specify..... is it "cn=oracle" or "cn=orcladmin"
Thanks
peter.Hi Raford,
Thanks for your reply.
We tried to create Content Database Source with the details we have...
However in this process getting an exception....
11:20:20:778 INFO main
11:20:20:784 INFO main Oracle Secure Enterprise Search, Crawler: Release 10.1.8.2
11:20:20:785 INFO main Copyright © 2006, 2007, Oracle. All rights reserved.
11:20:20:785 INFO main
11:20:20:785 INFO main ================== Crawling settings ==================
11:20:20:785 INFO main Reading configuration file from /mnt/u08/SOADEVIL/seshome/search/data/config/crawler.dat
11:20:20:785 INFO main Agent = Oracle Secure Enterprise Search
11:20:20:807 INFO main User = EQ_TEST
11:20:20:807 INFO main Database connect string = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=devilrays.appsassociates.com)(PORT=1525))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Devilses.devilrays.appsassociates.com)))
11:20:20:807 INFO main Source type is User-defined
11:20:20:807 INFO main Source is "BJ_Cont"
11:20:20:807 INFO main Document access control policy is user-defined
11:20:20:808 INFO main Number of crawling threads = 5
11:20:20:808 INFO main Queue table = I1S8
11:20:20:808 INFO main URL table = EQ$URL
11:20:20:808 INFO main Maximum documents to crawl = no limit
11:20:20:808 INFO main Maximum depth to crawl = 2
11:20:20:808 INFO main Document size limit = 10M
11:20:20:808 INFO main Locale of the crawler message is "en_US"
11:20:20:808 INFO main URL exclusion rule = (?i:(?:\.gif)|(?:\.jpg)|(?:\.jar)|(?:\.tif)|(?:\.bmp)|(?:\.war)|(?:\.ear)|(?:\.mpg)|(?:\.wmv)|(?:\.mpeg)|(?:\.scm)|(?:\.iso)|(?:\.dmp)|(?:\.dll)|(?:\.cab)|(?:\.so)|(?:\.avi)|(?:\.wav)|(?:\.mp3)|(?:\.wma)|(?:\.bin)|(?:\.exe)|(?:\.iso)|(?:\.tar)|(?:\.png))$
11:20:20:808 INFO main URL exclusion rule = \?.*(.*\+)\1{3}
11:20:20:812 INFO main Document read timeout threshold = 30 second(s)
11:20:20:812 INFO main Crawler default character set is "8859_1"
11:20:20:812 INFO main Crawler default language is "en"
11:20:20:813 INFO main Auto language detection is on
11:20:20:813 INFO main Auto character set detection is off
11:20:20:813 INFO main Document service pipeline is "Default pipeline"
11:20:20:813 INFO main Verbose mode is on
11:20:20:935 INFO main Caching on: directory = /mnt/u08/SOADEVIL/sesdata/Devilses/cache/I1DS8/, max size = 250, action = SES_TASK
11:20:20:935 INFO main Filtering on: filter path = /mnt/u08/SOADEVIL/seshome/ctx/bin/ctxhx, number of filters = 2
11:20:20:935 INFO main MIME inclusions = text/html text/plain application/pdf application/x-msexcel application/vnd.ms-excel application/ms-excel application/x-mspowerpoint application/vnd.ms-powerpoint application/msword
11:20:20:935 INFO main URL table attributes = url, depth, signature, last_modified, status, url_id, access_url, enqueue_status, TITLE, DESCRIPTION, AUTHOR, CRAWLED_DATE, CONTENT_LENGTH, CONTENT_TYPE, LANG, CACHE_FILE_PATH, DS_ID
11:20:20:936 INFO main SQL callback statement is "begin eq_crw.crawler_callback(?,?,?,?); exception when eq_def.search_error then eq_err.raise; when others then eq_err.raise; end;"
11:20:20:936 INFO main Cookie support is enabled
11:20:20:937 INFO main Maximum number of cookies = 300
11:20:20:939 INFO main Maximum number of cookies per host = 20
11:20:20:939 INFO main Maximum size of cookie = 4096 bytes
11:20:20:940 INFO main Cache file deletion is disabled
11:20:20:940 INFO main Crawler plug-in manager class is "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:20:940 INFO main SQL hook ID is "8"
11:20:20:940 INFO main SQL command hook statement is "begin ? := eq_crw.crawler_get_command(?,?,?,?); end;"
11:20:20:940 INFO main SQL response hook statement is "begin ? := eq_crw.crawler_send_response (?,?,?,?,?,?,?,?,?,?,?,?,?); end;"
11:20:20:940 INFO main Crawler launched by schedule "BJ_Cont"
11:20:20:940 INFO main
11:20:20:940 INFO main =================== Crawling status ===================
11:20:20:941 INFO main Crawling started at 9/18/07 11:20 AM
11:20:21:912 INFO main URL manager connecting to Oracle...
11:20:21:974 INFO main connected
11:20:22:586 INFO main Queue manager connecting to Oracle...
11:20:22:631 INFO main connected
11:20:23:497 INFO main Invoking "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:501 INFO main URL manager connecting to Oracle...
11:20:23:529 INFO main connected
11:20:23:531 INFO main Initializing crawler plug-in manager "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:531 ERROR main SES keystore location: null
11:20:23:532 ERROR main null oracle.search.sdk.crawler.PluginException oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351 oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479 oracle.search.crawler.WebCrawler:begin:1076 ImtCrawler:run:1831 ImtCrawler:main:480
11:20:23:532 ERROR main null oracle.search.sdk.crawler.PluginException oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351 oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479 oracle.search.crawler.WebCrawler:begin:1076 ImtCrawler:run:1831 ImtCrawler:main:480
11:20:23:676 INFO Thread-1 Remote command "reportstatistics" received, argument = "quit"
11:20:23:676 INFO Thread-1 Executing remote command "reportstatistics"
11:20:23:697 INFO Thread-1 Send back remote command execution result
11:20:25:944 INFO main Shutting down all crawling threads...
11:20:25:948 INFO main
11:20:25:949 INFO main =================== Crawling results ===================
11:20:25:949 INFO main Crawling started at 9/18/07 11:20 AM
11:20:25:949 INFO main Crawling stopped at 9/18/07 11:20 AM
11:20:25:949 INFO main Total crawling time = 0:0:5
11:20:25:949 INFO main
11:20:25:954 INFO main Total number of documents fetched = 0
11:20:25:954 INFO main Document fetch failures = 0
11:20:25:954 INFO main Document conversion failures = 0
11:20:25:954 INFO main Total number of unique documents indexed = 0
11:20:25:954 INFO main Total data collected = 0 bytes
11:20:25:954 INFO main Total number of non-indexable documents = 0
11:20:25:955 INFO main
11:20:25:955 INFO main Number of times disk cache is full = 0
We have followed the installation details provided in "SESAdmiistratorGuide".
In that guide.... during creation of Content Database source he did not mention any entry for "SES keystore location", and the exception which we are getting is related to "SES keystore location: null" (please look into the exception stack).
could you please guide us.
Thanks
peter. -
Creation of Transfer Order for Inbound Delivery
Hi,
I am using L_TO_CREATE_DN for creation of a TO for Inbound Delivery.
I am getting this message."""Item 180000166 000010 does not exist or is not relevant for picking"""
The delivery is having Ware House number so i think it is relevent for picking... It is having an item 10 also. I dont know why this message is coming.
Can anyone please let me know how to get rid of this error and create a TO for the inbound delivery.
Regards
RakeshHi Rakesh,
Pad the delivery number with a 0 in front and check.
like, instead of 180000166, pass 0180000166.
Regards,
Ravi -
Error during creation of sales order
while creating a sales order Pricing error, mandatory condition papu is missing...
when i am entering then it shows condition records for condition type papu can only be entered via agreement...pls solve the problem....Dear Prasanta
Go to VK13, give PAPU and execute so that the system will ask you select a combination. Most probably, you would be maintaining for the combination of "Customer / material with release status". Select that and see whether for that particular customer, pricing is maintained. Since you have not maintained the pricing for that customer and material, you are facing the problem. Maintain price and then retry.
thanks
G. Lakshmipathi -
Hi all,
In LT06 transaction, after Generate TO Item, we try to save document. However we get "GETWA_NOT_ASSIGNED" error.
Information on where terminated
Termination occurred in the ABAP program "SAPLLPRI" - in "PROTO_TAB_READ".
The main program was "RLVSDR00 ".
In the source code you have the termination point in line 523
of the (Include) program "LLPRIF00".
Unfortunately i couldn't find any proper OSS note or another solution.
I am looking for your recommends.
Thanks a lot.
KaanHi Fren, I am getting the same error after the upgrade from 4.7 to 6.0.
for
ZRLVSDR00
it gives error on
IF i_create_itab = con_x.
I got your solution but it was for RLVSDR00. How do I need to prooced for ZRLVSDR00.
Looking forward to hear from you.
Regards,
Ranjan A -
Creating Transfer Order for a Material document
Hi,
I am transferring the Unrestricted stock from one material to another material through Movement type 309.
I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
Regards,
Kishore.Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri
Maybe you are looking for
-
Why is it when I am downloading my CD's to my computer some of my music gets an explanation mark next to it. Second question When I can download music to my iPod some of the music downloads but I can not play it because it has this little round circl
-
How do i move photos from iphone 4 to macbook pro
How do I move photos from my iphone4 to my macbook pro?
-
Huge .mov file. Need a DVD
Hello, I have a file that I uncompressed in FCP X becasue it was choppy during playback. The result is a 39 Gb monster that I am having trouble getting into a managable size for a DVD. The end goal is to burn a DVD that will be projected. Any thought
-
Imported .ics Not Showing up in iCal
I exported a calendar from Lotus Notes using .ics format. When I import it into iCal, no calendar events appear--everything's still empty. Any idea what I'm doing wrong? The .ics file is clearly full of stuff, and no error messages appear.
-
Hi, I have sun blade 1000 with Solaris 9 running on it. I am trying to install solaris 10 on it using a dvd. At the ok prompt boot cdrom command gives me Bad disk label Bad magic number. However I can see the contents of the dvd when I boot the machi