Error during data processing

Hello,
I try to load Arccrual Engine Costing Results from DSO (0ACE_DS01) to Leasing Accounting Key Figures DSO (0FIL_DS04) but during the data processing I get Error 2 in update:
Cannot determine fiscal year/period for date 99993112 and variant.
Errorcode: RS_BCT_CRM_FIN006
Could somebody help? Thanx in advance

Hello Prakasubw,
yes this could be the error. in infopackage i enter for the fiel datefrom: 01012005
and in field dateto: 31129999
, because in the infopackage the fields show lenght 8!!!
what do you think should I enter in these fields in the infopackage:
datefrom:
dateto:
Thanx in advance!
may I can you send a screenshot with the error and the infopackage selection?
Message was edited by:
Rusty

Similar Messages

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Error during Proxy Processing from ECC system

Hi All,
I had created Webservice using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
"An error has occurred. Maybe the request is not accepted by the server: "
"Error during proxy processing"
Request
POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
Host: rpmsap3.rapidigm.com:8080
Content-Type: text/xml
Connection: close
authorization: <value is hidden>
Content-Length: 389
SOAPAction: ""
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-client=100; path=/
content-type: text/xml; charset=utf-8
content-length: 270
sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
server: SAP Web Application Server (1.0;640)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
Appreciate any help on above issue
Regards
Manish Mundra

Hi All,
Please help on below issue.
Thanks in Advance
Regards
Manish

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
balu

Hi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain

Error during proxy processing

Hi Experts,
We have a web service hosted on PI and getting the Tax Jurisdiction values from Taxware via ECC(ECC has a TCP/IP connection to connect to Taxware system, From there ECC gets Taxjurisdiction Codes and gives back to PI).
When we make a call to this Web service following Error response has been given. Please let us know what could be the reason.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2>ZCL_GET_TAX_IN</SAP:P2>
<SAP:P3>GET_TAX_JURISDICTION_SYNC</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing Message E TAX_TXJCD 110 cannot be processed in plugin mode HTTP</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Thanks,
Sekhar.J

Hi,
We are using XI adapter. The same Web Service is working good in Development and Quality Enviroments, I am wondering why it is failing in Production Environement intermittently. And also in ECC we are using TCP/IP connection to fetch Tax Jurisdiction codes from TaxWare System. This TCP/IP connection was configured in SM59 of ECC. PI will make call to ECC and ECC will make call to TaxWare and returns the result back PI.
Thanks,
Sekhar.J

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

Error during date calculation: Time entered not numerical

Hi All,
We are using SAP MI 7.0 SP18 Server and Client
xMAM 3.0 SR06
Now when we create a Notification using the link Notification Management of type PV and SAVE.
When Synchronized, it is completed but backend no notification is trigerring and when checked in Error Logs
the following message is shown Error during date calculation: Time entered not numerical
Kindly Suggest
Regards,
Kiran Joshua

Hi All,
I got to know how to edit the entries from merep_mon : Thanks to Chinna.
But unfortunately that did not solve my problem
I had to debug the function module of the respective SyncBO and found that the Profile type was not maintained in the backend.
Infact the error "Error during date calculation: Time entered not numerical" was misleading.
Anyways upon customising the Profile for the PJ and PV type Notifications that solved my issue.
Regards,
Kiran Joshua

Error during activation process

hi all,
i have"error occured during activation process" DSO...but the request is available for reporting.what do i do?
thanks

Hello Dear
In the setting of infopackage you have following options
a. No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b.Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
c.Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
Check if you have selected the third option
Thanks
Tripple k

Error during propagation process in streaming

I am getting following error during propagation
ORA-12170: TNS:Connect timeout occurred ORA-12170: TNS:Connect timeout occurred
In order to resolve this i add following lines in sqlnet.ora on both nodes, but problem is still there....
SQLNET.SEND_TIMEOUT=300
SQLNET.RECV_TIMEOUT=300
SQLNET.INBOUND_CONNECT_TIMEOUT=300
SQLNET.DEFAULT_SDU_SIZE=32767
SQLNET.RECV_BUFF_SIZE=655336
SQLNET.SEND_BUF_SIZE=65536Need your help in resolving this issue........

Hi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa

Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
    opmnctl task failed
    Step Executing: opmnctl start coreapplication_obisch1 failed
    Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..

Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

Error during the Process of Netting - No Identifier Found TPM_TRG136

Hi All
During the process of doing Netting , the system is popping up an error message as - No Identifier found. The message error is TPM_TRG136.
Can anybody suggest the solution for the error.
Ram K

Hi @artem98765,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you tried to do a recovery back to factory you received the error incomplete recovery.
As you did not state if how you were doing the recovery I will include documentation for the process along with a troubleshooting document.
HP PCs - Performing an HP system recovery (Windows 8)
HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)
If you are still unable to complete the recovery please contact HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Error during burning process

I am using OS10.4.6
Powermac G5
Final Cut HD4.5
IDVD 5.0.1
I have made a 27 minute movie in Final cut....i cannot seem to burn it in IDVD no matter what. I have been using this full time for 4 yrs and have never had this issue.
I have tested other movies and they burn fine...i have tried throwing away all the render files and re-rendering the movie in final cut and then re-exporting it out. i have exported it out in 2 different ways...no matter what i do, I keep getting an error during the burning process that says
there was an ERROR in the burning process
which is leading me to believe that some file within my final cut project is corrupt or problematic.
i have worked on this thing for about 50 hours and cannot start over from scratch, Help!

dejavu! http://discussions.apple.com/thread.jspa?threadID=512852&tstart=0
Ashley- I know you're probably getting desperate but please don't duplicate post.
I'm not real familiar with iDVD but I know you have to export a QT movie from FCP and then burn that right? Your QT Movie, was it a self contained QT or a refernce Movie. If you have no idea what I just asked, when you exported it and you went to File>Export>QT Movie> did you select the box that says "make movie self-contained"?
If so then a corrupt file is a moot (sp?) point. Can you open the QT Movie and watch it successfully in QT?
If you CAN watch it in QT then your problem probably lies in iDVD.
Answer these questions for us and we'll take the next step to getting a DVD in your hands.

ERROR DURING DELIVERY PROCESSING --PL. HELP

Dear All,
Pl help me that user is making a delivery & he is getting an error as --> " Error during copy of partener : Partener role SP, Pl help what to do for thsi how to solve ? User is processing the delv by t.code = CNSO ,
Points will be immed. rewrded for helpful solution
sap11
Edited by: sap11 on May 9, 2008 7:01 AM
Edited by: sap11 on May 9, 2008 7:02 AM

Hi Friend,
Iam not aware regarding CNSO and says transaction does not exist. Check for the exact transaction code used by the user.
In customising Check for the partner determination for delivery. Check for your delivery type what is the partner determination procedure is assigned and for that procedure check for the partner functions. Here sold to party (SP) should be assigned to the procedure with not modifable check box ticked.
Regards

Planning - Recieving errors during configuration process

Hello,
We are currently installing System 11.1.1.1 using Weblogic 9.2 MP1. We have successfully installed and configured Shared Services, Workspace and Essbase. We have installed Planning but I keep recieving errors during the configuration process. The following errors are logged in the configtool_err.log file:
Feb 10, 2009, 07:18:10 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Feb 10, 2009, 07:19:59 AM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Error happen while trying to get Planning system DB info from registry.
(Feb 10, 2009, 07:30:10 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:30:12 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
(Feb 10, 2009, 07:30:13 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:50:05 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
Any thoughts or information would be much appreciated.
Thanks
Tony

Hi,
What O/S are you installing on?
Is it possible you can try and break down the configuration of planning.
So only have Shared Services / Open Ldap Services running, make sure you can log into shared services console
Run the configurator, choose planning > Configure Database (are you using a seperate database for each product, I am finding it helps with installations)
If you are select the "Perform 1st Time configuration of Database" - Chose Drop and re-create tables"
If successful move on to the configure - Deploy to application Server.
Cheers
John
http://john-goodwin.blogspot.com/

Error during data processing

Similar Messages

Maybe you are looking for