Error during determn of backend follow-on doc

Hi,
We are suddenly facing this error after the shopping cart has been approved:
"Error during determn of backend follow-on doc. for shopping cart xxxxxxxxx".
There are many shopping carts having the same error or they are simply as "ERROR IN PROCESS".
Can you help us, as why is this happening & how can this be resolved.
This error was not exsisting previously. We have checked all the organizational data in the structure.
We have also tried pushing them from backend but they still result in error.
The BASIS have checked the RFC connection & the logs but have found no error.
Please let me know what could be the problem & the solution for the same.
Thanks,
Bhakti.

Hi Bhakti
SPRO > IMG > SRM > SRM Server > Cross Application basic settings > Define objects in back end system
can you check what are the settings here?
are you in classic mode?
Are you geting all sc s for the same error? or only for particular material group only. update us.we can explore..
Note 945340 - Sourcing Cockpit: No backend error message displayed
check the above notes aplicable for you.
Are you taken this sc to soucricg cockpit.
Note 885397 - Backend PO cannot be created from the Bid Invitation
what version are you in.The above note is applicable.check it up.
explore what is the history of that errored sc.
regards
Muthu

Similar Messages

  • Error during determn of backend follow-on doc. for shopping cart

    I am using Classic Scenario in SRM 4.0 and R/3 ECC5.
    When I am making PO in SOCO against approved shopping cart I am facing following error and PO is not getting created.
    "Error during determn of backend follow-on doc. for shopping cart XXXXXXXXXX"
    I have Checked up following :
    1. Product Cat defined in backend and in Org plan attribute
    2. Object for Prod Cat Vs. PGR defined in SPRO
    3. Doc type in R/3 attribute defiend in BSA attribute of Org Plan.
    Still problem is coming.
    Any clue form some one.
    Sanjay

    Hi Sanjay/Vadim,
    We are also having a simialr issue..
    for SRM server 500 SAPKIBKS08...
    R/3 4.7
    "But this issue comes up only in the Test system and works fine with the Dev sys.." Double checked all the config steps and looks alike..
    We are using the classic scenario RFx process to create a backend PO from the bidding engine after the bid is accepted..
    it alwayz throws up the error SC/ Local Error..
    : Error during determn of backend follow-on doc. for shopping cart 0010000103 / 0000000001....
    we just started debugging from the web by breaking it at META_BAPI_DISPATCH and still looking into it..
    but in the mean while just want to know if this is more a config issue or and RFC connection issue..
    could you forward me any OSS notes if any regarding this issue..
    thanks in advance..
    Regards
    Manoj

  • I got an error during update IOS5 as follow

    There was a problem download the software for the Ipad "XXXX". You don't have any permission to access the requested resources.
    What should I do ?? Anyone can help ?

    Here's what your error can be about, copied from http://support.apple.com/kb/TS3694
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    Try to connect in recovery mode after you checked your security software settings and USB ports. iOS: Unable to restore
    Message was edited by: Ingo2711

  • Processing not possible; follow-on docs do not permit posting - WM

    Dear All,
    The transaction WAE03, while doing the posting of waste material the following error occured "Processing not possible; follow-on docs do not permit posting"
    Please help me out.
    regards,
    ravi

    Hi ravikk,
    I suppose you are modifying an entry document, this entry document has a document category (SPRO Environment, Health and Safety ->Waste management -> Disposal Processing -> Basic Settings for Disposal Processing -> Specify Document Categories -> Document Category/Functions Assignment), the document category may have assigned a status profile (the default for waste disposal management is EHS_WMM1).
    With the status profile (SPRO - Environmental, Health & Safety -> Waste Management -> Disposal Processing -> Basic Settings for Disposal Processing -> Status Management -> Check, Extend, Set Status Profiles) you can see that has several status number, do double-click in any of these numbers and you will see other screen (Transaction Control), here you see what are you allowed or forbidden when your entry document has this status. You can see the avaliable trnsaction with the menu (Environment ->Transactions), waste management transactions starts with WA* and its description with WA-PRO:.
    Back to the initial screen if you push the button 'Object Types' you go to 'Allowed Type Objects' the checkbox 'Waste Quantity' must be checked.
    Check this link for more info about system status and user status link
    Regards
    JCD
    Edited by: Juan Carlos Delgado Peña on Mar 5, 2012 3:20 PM

  • Error during Backend communication

    Hi,
    We have performed the system refresh for this system and backend
    system ERX. After the refresh while we open the shopping cart and when
    try to add the product to the shopping cart it says "Error during
    backend communication". We have checked the RFC connection between the
    systems its working fine.

    Have you done the BDLS stuff in the backend too ?
    Have you run RHOMATTRIBUTES_REPLACE ?
    This will allow you to amend the following attributes.
    ACS               System alias for accounting
    BSA               Document type in backend system
    BWA               Movement type in backend system (for reservations)
    SYS               System alias
    VENDOR_ACS          Accounting system for vendor
    VENDOR_SYS          System alias for vendor
    PRCAT               Product Category in backend system
    WRK               Plant in backend system
    LAG               Storage Location in backend system
    After this you need to update the following attributes manually..
    1.     Company Codes
    2.     Purchasing Organisations
    3.     Purchasing Groups
    4.     Purchasing Group material group responsibility

  • I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental "A Thousand Words" because it is authorized to play on another computer or device." any ideas?

    I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?

    Rentals can only play on one device/computer at a time.  Have you tried to play on the computer and still have that window open?
    Have you transferred the rental to iPod/iPhone or iPad to watch?
    If it won't play anywhere contact iTunes support at:
    expresslane.apple.com
    AC

  • Backend PO number does not update SRM follow-on doc section

    Hi Guys,
    We are on SRM5.0 and ECC6.0 with Classic scenario.
    We are developing a logic in BADI BBP_CREATE_BE_PO_NEW (method FILL_PO_INTERFACE1) to determine if a Goods Receipt is required for some business conditions. Below is the logic.
    1.If GR is required then create a PO with External number range in backend. This is working fine.
    2.If GR is not required then create a PO with internal number range in backend. PO_NUMBER field will be cleared in the BADI so that backend system creates a PO with internal number range. This is working fine.
    But the problem in the point 2 above is, internal PO# is not reflecting in the follow-on doc section in SRM. I noticed that SRM allots a PO# in table BBP_PDBEI with backend external number range before it transfers the data to backend. We tried to delete the PO# in BBP_PDBEI-BE_OBJECT_ID in the same BADI so that backend system can updates this field BE_OBJECT_ID in SRM with internal number PO. We did not succeed in doing this.The SC status shows Approved but do not show the PO#.
    Can any one tell me how to populate the backend internal number PO in the Follow-on doc? Is this the right way of doing or is there any better way?  Did any one developed such logic?
    Please share your thoughts and experience.
    Thanks in advance..
    Jagdish

    I noticed that SAP takes the number sequence from number range PO and updates BBP_PDBEI field before sending the Purchase order to ECC. If the different number range is defined in IMG "Define num range per Backend system for Follow-on docs" then system takes that num range. Then BBP_GET_STATUS_2 checks the PO# and updates SRM if the PO# matches otherwise it wont update.
    But in our case we defined num range 44 for POs with Goods receipt and would like to assign another number range 22 for POs with NO GR. We can assign different PO doc type (ZEC) for NO GR by using BADI BBP_CREATE_BE_PO_NEW. But how to assign num range 22 for ZEC dynamically in BADI. System is trying to take num range 44 by default.
    Is there any way we can assign different number range in SRM BADI?
    Thanks,
    Jagadish

  • Why do i getThe following clip encountered an error during import and is still referencing media on the camera:

    When importing in FCPX 10.1.3 I get: The following clip encountered an error during import and is still referencing media on the camera:  ??? anyone

    I get this sometimes too, when importing from P2 cards.  Sometimes it takes me a few tries to get it imported.  I have noticed that it seems to work better when I actually mark an IN and Out for the clip, but that's not totally a solution.

  • Message: The following clip encountered an error during import and is still referencing media on the camera:

    I am getting this message when I try to import files from Canon C100: The following clip encountered an error during import and is still referencing media on the camera:
    These are AVCHD files and it seems to be happening randomly.  With different clips as I try to import...happening both with regular importing and with Create Optimized Media...
    It just started happening yesterday-never had this problem before and have uploaded countless times with this camera and system. THanks.

    Update: OK, I just tried to import the footage into another hard drive (an internal hard drive) and it seems to be going fine now.  Maybe something is corrupted on the external hard drive I was importing into...wierd.

  • When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.

    When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.
    What am I doing wrong?

    Read and answer the questions posted by Bengt Wärleby in this thread: Cant burn my idvd project to...: Apple Support Communities
    OT

  • Standalone Scenario - Error during Creation of Local Purchase Order

    Hi All,
         I am trying to setup Standalone Scenario, i have created all the master data locally, i am able to Order SC, but after workflow approval SC goes into error 'Error during creation of local purchase order from shopping cart XXXXXXXXX'
         I have created following configuration setting for local PO number
    1) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Number rang. for Schopping Carts and Follow-on Doc. --- i have number ranges for PO follow-on doc. i.e.
    inrerval No = PO, from number = 0004000000, to number = 0004999999, ext. = unchecked
    2) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Ranges per backend system for follow-on documents PO, PR etc
    3) In sourcing (SPRO -> Cross-Application Basic Settings -> Sourcing -> Define Interactive Sourcing for product categories) ---  sourcing is never carried out.
    Can anybody help?
    Regards,
    SAP Guy.
    Edited by: SAP Guy on Apr 23, 2008 2:32 AM

    Hi SAP Guy,
    Following steps are must for Local number range
    1) Create number range for local PO
    2) Maintain your logical system in 'Define number range per backend system for follow on document'
    3) Define Transaction Type for BUS2201, define document type (e.g. EC1)
    4) Assign Document type (EC1) in Org attribute BSA.
    Hope this helps.
    Regards,
    Manish.

  • Error message during burning: Error during rendering/encoding

    Hello,
    I am using iDVD 6.0.2 to create a DVD. I have pictures and videos. The videos are in .ASF format and they are played on Quicktime on my computer.
    Anyway, when I go to burn the DVD, it goes through the slideshow fine. But then, once it starts videos, it stops and the following error message shows up:
    Encoding Video
    Error during rendering/encoding
    I am using a Memorex DVD-R (8x, 4.7 GB, 120 min video) dvd. Is there any way possible I can fix this problem? I really need this DVD soon. Thank you so much.

    Best Buy and Office Depot carry Verbatim by me. Use only DVD-R, not DVD+R.
    My guess is that .ASF file...........
    Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006

  • Error during Installation of OBIEE 11.1.1.6

    Hi All,
    I am facing following error during in installation of OBIEE 11.1.1.6 ON WIN 2008 SERVER. Before begin the installation I have done uninstall of OBIEE 11.1.1.5.
    Any help would be appreciated.
    *************** Trying to Start OPMN **************
    *************** Executing Command **************
    cmd /c C:\Users\S_ORAC~1\AppData\Local\Temp\Opmn1337233127128.bat
    C:\Users\S_ORAC~1\AppData\Local\Temp>SET ORACLE_HOME=D:\OBIEE_Home\Oracle_BI1
    C:\Users\S_ORAC~1\AppData\Local\Temp>CALL "D:\OBIEE_Home\instances\instance2\bin\opmnctl.bat" startproc ias-component=coreapplication_obiccs1
    opmnctl startproc: starting opmn managed processes...
    ================================================================================
    opmn id=pdc03srv160:9501
    Response: 0 of 1 processes started.
    ias-instance id=instance2
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    coreapplication_obiccs1/OracleBIClusterControllerComponent/BIClusterController/
    Error
    --> Process (index=1,uid=151980586,pid=2976)
    time out while waiting for a managed process to start
    Log:
    none
    java.lang.Exception: opmnctl task failed
         at oracle.as.install.bi.biconfig.standard.OpmnctlTask.doExecute(OpmnctlTask.java:74)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
         at java.lang.Thread.run(Thread.java:662)
    Executing Task: Executing: opmnctl start coreapplication_obis1
    Regards,

    Hi,
    Please double check your looback adaptor configuration
    The issue has been identified as that for some reason there is a hardcoded machine name mistakenly placed in the Solaris version of OBIEE, which is being sent out to be resolved by DNS. This machine name is an internal oracle machine, and so DNS can not find it.
    This has been reported as the following bugs:
    Bug 12804924 - OBIEE 11.1.1.5.0 INSTALLATION FAILS IN CONFIG PHASE WHEN STARTING COMPONENTS
    Bug 12790815 - AFTER WHAT APPEARS TO BE A GOOD INSTALL CANNOT RESTART ANY OBIEE SERVICES
    Solution:
    As a workaround, Add the following entry to the end of your hosts file with a dummy IP address (e.g. 127.0.0.1) and then reboot:
    127.0.0.1 stafas12.us.oracle.com stafas12
    This should prevent timeout while checking DNS to resolve that non-existing address.
    http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/biee.htm#CACEFIAG
    Reference: My oracle Support document
    OBIEE 11.1.1.5 Installation On Solaris 64-bit Fails At Starting OPMN Managed Processes [ID 1380777.1]
    OBIEE 11g: Error: "failed to start a managed process after the maximum retry limit" OPMN Fails to Start When Installing OBIEE on 64-Bit Operating System [ID 1305993.1]
    Thanks
    Deva
    Edited by: Devarasu on May 18, 2012 10:57 AM

  • SAPInst ECC6.0 - Error during phase "Create Java Users"

    Hello,
    I am currently installing ECC6.0 IDES with windows server 2003 & MaxDB.
    I am getting an error during the "Create Java Users" phase. The initial error stated that the user SAPJSF already existed. During retry a different error came up - that the user SAPJSF has no password.
    Can anyone advise what I can do here to resolve this problem?
    Regards,
    Nicholas Wilson

    Hello Again,
    Just to provide some further information, this is the log which I received when the SAPInst first errored:
    Jan 12, 2007 10:12:31... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
    Jan 12, 2007 10:12:32... Info: Connected to backend system Z01 client 001 as user DDIC
    Jan 12, 2007 10:12:32... Info: Called for user SAPJSF
    Jan 12, 2007 10:12:39... Info: Formal password check successful
    Jan 12, 2007 10:12:39... Info: Will create user SAPJSF
    Jan 12, 2007 10:16:54... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
    Jan 12, 2007 10:17:03... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.security.tools.UserCheck$DetailException: User SAPJSF already exists
    Diagnosis
    You have tried to create an existing user using the copy function.
    Procedure
    Please edit the existing user or first delete the user and then use the
    copy function. Or choose another user name, for example, by appending
    part of the first name.
    [System: Z01(001), Message: 01 224]
         at com.sap.security.tools.UserCheck.handleBapiRet2Table(UserCheck.java:1252)
         at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1795)
         at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Jan 12, 2007 10:17:07... Info: Leaving with return code -2
    Reserved 1610612736 (0x60000000) bytes before loading DLLs.
    According to the log, the system believed the user SAPJSF to have already been created.
    When I carried out a retry, I receive the following log:
    Jan 12, 2007 10:23:45... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
    Jan 12, 2007 10:23:45... Info: Connected to backend system Z01 client 001 as user DDIC
    Jan 12, 2007 10:23:45... Info: Called for user SAPJSF
    Jan 12, 2007 10:23:45... Info: User SAPJSF exists
    Jan 12, 2007 10:23:45... Error: Exception during execution of the operation
    [EXCEPTION]
    com.sap.security.tools.UserCheck$UserLogonException: User account SAPJSF has no password (USER_HAS_NO_PASSWORD)
         at com.sap.security.tools.UserCheck.checkUser(UserCheck.java:833)
         at com.sap.security.tools.UserCheck.main(UserCheck.java:268)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Jan 12, 2007 10:23:45... Info: Leaving with return code 2
    Reserved 1610612736 (0x60000000) bytes before loading DLLs.
    In this log, it accepts that the user SAPJSF is already created, but errors because the user does not have a password.
    Any suggestions greatly appreciated.
    Regards,
    Nicholas.

  • Mapping error during runtime

    Hi,
    I have scenario like JDBC sender and file receiver.
    I am able to poll with JDBC sender adapter and message has success in adapter engine.
    but i am getting following error while mapping runtime.In sxmb_moni status error during mapping runtime.
    Below i am giving the trace file:
    <Trace level="1" type="T">Interface Mapping urn:iwaysoftware:adapter:iworacle:tablerequest jdbc_im</Trace>
      <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_jdbc_mp_</Trace>
      <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:303) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:178) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:298) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</Trace>
    I tried with all options using mapping functions.But the same eror is coming.
    When i tested my mapping program its successfully running in map bulider without any errors.
    The error occuring at runtime.
    Source strcture :
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:resultset xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest">
       <row>
          <interface_header_id>928822</interface_header_id>
       </row>
    </ns0:resultset>
    Target structure:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:PO_HEADER xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest"><PO_HEADERS_INTERFACE><INTERFACE_HEADER_ID>928822</INTERFACE_HEADER_ID></PO_HEADERS_INTERFACE></ns0:PO_HEADER>
    Can any body suggest what causing the problem.
    Regards
    Usman

    Hi Usman,
    Test your mapping in IR with the payload from SXMB_MONI. You can refer michal's weblog on <a href="/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios to test your mapping (in real life scenarios)</a>
    In other words you copy the XML message from monitoring and exectute the mapping in Integration Builder with maximal trace to get the reason.
    So what you can do is check ur runtime payload in sxmb_moni with,
    IR>message mapping>test tab>give values>test-->source xml
    Also i thought i will give you some details on what ur doing, so maybe you can compare it with what uhave done and see where you have gone wrong.
    A JDBC sender adapter has 2 essential fields,
    1. SQL Statement
    2. Update Statement
    Your SQL statement will contain your SELECT statement and once your SQL statement is executed, UPDATE statement is executed. This is done so that records that have been selected by the SQL statement should not be selected again as the JDBC sender adapter will poll over the database for every poll interval.
    If you want to SELECT something from your Database, then you will have to go for a JDBC sender adapter.
    This is how a SENDER JDBC Adapter works,
    When you are using your JDBC as a sender, then your JDBC will poll over your database and select the rows that satisfy your Select Query.
    In your case, as you are dealing with multiple tables, you can write a stored proceudre for your Database, and call this stored procedure in your Sender JDBC adapter in the SELECT field of your JDBC adapter.
    Go through this blog for stored procedures.
    /people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
    For Configuring the Sender JDBC Adapter refer go through <a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm">Configuring the Sender JDBC Adapter</a>
    Also go through this blog and see if it helps you.
    /people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
    To access any Database from XI, you will have to install the corresponding Driver on your XI server.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    I hope this helps...
    Regards,
    Abhy
    Message was edited by: Abhy Thomas

Maybe you are looking for