Error during DG data distribution
Hi SAP DG Experts,
I am configuring and testing DG data distribution from central EHS system to multiple ERP systems.
I am able to send the DG idoc and ERP system is receiving that.
But the DG data creation is failing and when I check DGp7 I can get an error message "data records were not save as no selection date was available".
Please let me know if you have come across this issue?
Thanks
PS
Dear Pugazendhi
to distrbute sucessfully DG master via ALE you need to disztrbute
a.) the phrases
b.) do a proper set up of receiver system
Check e.g.
Distribution (ALE) of Exceptions to Dangerous Goods Regulations - Dangerous Goods Management (EHS-DGP) - SAP Library
This topic is asked for very rarely
C.B:
Similar Messages
-
Incorrect XML disply for ALERTCATEGORY error during deserialization data lo
Hi,
I am getting below error while executing first scenario in Quality enviornment, i have not defined and trasported any ALERTS.
Incorrect XML disply for ALERTCATEGORY error during deserialization data loss occured when converting 011136c23c9430359b57c0ef8949c630
this error stoping my interface executing...did anyone experienced this issue??
put some light on this.
many thanks,
RajHave you checked this SAP Note # 1394710 ?
-
ERPI Error during Export data to GL for period 2012
Hi, experts
When I write back data from Planning to EBS, I encounter the following error during Export data to GL for period 2012. I have confirmed that Planning data has been upload to ERPI.
Do you have any hints on this error for me? Thanks a lot.
Log:
,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
,CASE
WHEN (INSTR(UPPER(wld.TEMP_COLUMN_NAME),'AMOUNT',1) = 1) THEN
CAST(SUBSTR(wld.TEMP_COLUMN_NAME,7,LENGTH(wld.TEMP_COLUMN_NAME)) AS NUMERIC(15,0))
ELSE 0
END ENTITY_NAME_ORDER
FROM (
AIF_WRITEBACK_LOAD_DTLS wld
LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
ON ppa.INTSYSTEMKEY = 'JC2PLN'
AND ppa.PERIODTARGET = wld.DIMENSION_NAME
AND ppa.YEARTARGET = 'FY12'
) LEFT OUTER JOIN TPOVPERIOD_FLAT_V pp
ON pp.PERIODTARGET = wld.DIMENSION_NAME
AND pp.YEARTARGET = 'FY12'
WHERE wld.LOADID = 176
AND wld.COLUMN_TYPE = 'DATA'
) query
GROUP BY PERIODTARGET
,YEARTARGET
,ENTITY_NAME_ORDER
) q
,TPOVPERIOD p
,AIF_GL_PERIODS_STG prd
WHERE p.PERIODKEY = q.PERIODKEY
AND NOT EXISTS (
SELECT 1
FROM AIF_PROCESS_DETAILS pd
WHERE pd.PROCESS_ID = 176
AND pd.ENTITY_TYPE = 'PROCESS_WB_EXP'
AND pd.ENTITY_ID = prd.YEAR
AND prd.SOURCE_SYSTEM_ID = 3
AND prd.SETID = '0'
AND prd.CALENDAR_ID = '10000'
AND prd.PERIOD_TYPE = 'Month'
AND prd.START_DATE > p.PRIORPERIODKEY
AND prd.START_DATE <= p.PERIODKEY
AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
ORDER BY prd.YEAR
2012-10-12 11:05:10,078 INFO [AIF]: COMM Writeback Period Processing - Insert Periods into Process Details - END
2012-10-12 11:05:10,516 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2012-10-12 11:05:10,594 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'FAILED'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 0
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 176
AND ENTITY_TYPE = 'PROCESS_WB_EXP'
AND ENTITY_NAME = '2012'
2012-10-12 11:05:10,594 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2012-10-12 11:05:10,719 INFO [AIF]: ERPI Process End, Process ID: 176I do not have any hints on this.
Would need to see the ODI Operator when the process is ran. -
Invalid data status error during the data extraction
Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
DhanushSir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors. -
Data upload error during uploading data in catalogs ( CCM 2.0 )
Hi ,
I am having problem during upload of data into catalogs of CCM 2.0. I think there is some problem with my file. When i click "Upload Schema" it just upload schema not the data. But if i am removing schema from file it is giving me error.
Kindly if anyone can send me sample file for data upload in CCM 2.0 or steps to upload data correctly.
Thanks & Regards,
KamalHi,
I don't understand very well, the standard characteristic for images is /CCM/PICTURE.
It's a complex characteristic composed by
/CCM/DESCRIPTION
/CCM/URL
/CCM/MIME_TYPE. (for example image/jpeg).
If your problems still exist, you can send me your file
Regards -
ERROR DURING LOADING DATA FROM PSA TO DSO IN "PRUEFMBKT"
Respected all
I am trying to load data through an r/3 field( pruefmbkt, char-40length) to infoobject. the data is coming correctly to psa but when i am loading it in to dso or infocube request is turning red giving following error message--
Value '010/12.05-112.15/hold on not operate' (hex.
'3031302F31322E30352D3131322E31352F686F6C64206F6E20') of characteristic
PRU_LSIL contains invalid characters
Message no. BRAIN060
Diagnosis
Only the following standard characters are valid in characteristic
values by default:
!"%&''()*,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.+
Furthermore, characteristic values that only consist of the character #
or that begin with ! are not valid.
You are trying to load the invalid characteristic value 1. (hexidecimal
representation 3031302F31322E30352D3131322E31352F686F6C64206F6E20).
Procedure for System Administration
Try to change the invalid characters to valid characters.
If you want values that contain invalid characters to be admitted into
the system, make the appropriate setting in BW Customizing. Refer to the
documentation describing the requirements for special characters and the
possible consequences.
For more information on the problems involved with valid and invalid
characters, click here.
kindly give me the solution how to deal with this problem.
thanks
abhayHI Abhay,
please check if the infoobject corresponding to field PRU_LSIL in BW system has lower case checkbox enabled in the infoobject properties, as the value '010/12.05-112.15/hold on not operate' coming from R/3 has lower case alphabets.
Hope this helps.
Regards,
Umesh. -
Error during registering Data Template in Oracle BI Publisher
Hi,
While creating report in BI Publisher. I am taking type as "Data Template".
Below is the error:
Failed to save data.
Error occured when creating xml data.
TypeError
Object Required
Thanks,
Abdul.Hi ,
what abt the other type is it working for you..
after selecting the report r u not able to see the below format
<dataTemplate>
<dataQuery>
</dataQuery>
</dataTemplate>
Thanks,
Ananth -
Error during extraction data from APO system
HI Gurus,
We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
When we checked it is working fine in dev environment.
Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
Could anybody throw some light on this issue.
Tnx in advance.
GuruHi,
Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
And
Has replication been done in BI side for the same.
Rgds
SVU
Edited by: svu123 on Sep 24, 2009 7:50 AM -
Error during master data delta load
Hi All,
I am loading delta master data to an info object 0DPM_DCAS through a flexible update.
Received an error "101 data records in table /BI0/XDPM_DCAS marked for deletion...
158 duplicate record found. 126 recordings used in table /BI0/XDPM_DCAS" at the Update level.
The status is red. There is no additional info in the Error Message button.
Also subsequent deltas cant be triggered and it says "Repeat cant be requested".
Please suggest an explanation and an way out.Hello VishNo,
How r u ?
This error is because of the Duplicate records existing in the InfoObject. Also, seems to be the problem in the Master Data Time independent navigational attributes table. Check the data and also the Monitor screen Details Tab entries & come back again.
Best Regards....
Sankar Kumar
+91 98403 47141 -
Error during implenting Data Guard
I am implementing Data guard on two different PC's by following this URL,
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
i the last step when i execute RMAN script, it is giving errors, i need your help in resolving this.
RMAN> run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'tmdb','tbdb'
set db_unique_name='tbdb'
set db_file_name_convert='/tmdb/','/tbdb/'
set log_file_name_convert='/tmdb/','/tbdb/'
set control_files='/u01/app/oracle/oradata/tbdb/tbdb1.ctl'
set log_archive_max_processes='5'
set fal_client='tbdb'
set fal_server='tmdb'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(tmdb,tbdb)'
set log_archive_dest_2='service=tmdb ASYNC
valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=tmdb'
Output of Script
using target database control file instead of recovery catalog
allocated channel: prmy1
channel prmy1: SID=16 device type=DISK
allocated channel: prmy2
channel prmy2: SID=21 device type=DISK
allocated channel: prmy3
channel prmy3: SID=152 device type=DISK
allocated channel: prmy4
channel prmy4: SID=24 device type=DISK
allocated channel: stby
channel stby: SID=135 device type=DISK
Starting Duplicate Db at 19-APR-11
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwtmdb' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwtbdb' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfiletmdb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfiletbdb.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfiletbdb.ora''";
executing Memory Script
Starting backup at 19-APR-11
RMAN-03009: failure of backup command on prmy1 channel at 04/19/2011 14:46:28
ORA-17627: ORA-12577: Message 12577 not found; product=RDBMS; facility=ORA
continuing other job steps, job failed will not be re-run
released channel: prmy1
released channel: prmy2
released channel: prmy3
released channel: prmy4
released channel: stby
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/19/2011 14:46:29
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on prmy2 channel at 04/19/2011 14:46:28
ORA-17627: ORA-12577: Message 12577 not found; product=RDBMS; facility=ORAhttps://supporthtml.oracle.com/ep/faces/secure/km/BugDisplay.jspx?id=8406972&bugProductSource=Oracle&h=Y
WORKAROUND:
Use RMAN duplicate database based on backup
https://supporthtml.oracle.com/ep/faces/secure/km/BugDisplay.jspx?id=10339515&bugProductSource=Oracle&h=Y
WORKAROUND:
Make sure that the raw partition on the Standby has equal size than the one
on the Primary. -
Error during populating data in combobox
Hi,
I am getting the ArrayCollection through RemoteObject call
and I am trying to populate that into the combobox. But I am
getting the following error popping up in the browser.
Error: Unknown Property: '-1'.
at mx.collections::ListCollectionView/
http://www.adobe.com/2006/actionscript/flash/proxy::getProperty()
at SearchReports/getReportCodeAndNameData()
at SearchReports/populateDocumentList()
at SearchReports/__ReportsDelegate5_result()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc::AbstractService/dispatchEvent()
at mx.rpc.remoting.mxml::RemoteObject/dispatchEvent()
at mx.rpc::AbstractOperation/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at
::NetConnectionMessageResponder/NetConnectionChannel.as$37:NetConnectionMessageResponder: :resultHandler()
at mx.messaging::MessageResponder/result()
Can anybody let me know what could be the reason?
Regards,
-SameerFixed the problem. Please ignore.
-Sameer
quote:
Originally posted by:
sam_the_best
Hi,
I am getting the ArrayCollection through RemoteObject call
and I am trying to populate that into the combobox. But I am
getting the following error popping up in the browser.
Error: Unknown Property: '-1'.
at mx.collections::ListCollectionView/
http://www.adobe.com/2006/actionscript/flash/proxy::getProperty()
at SearchReports/getReportCodeAndNameData()
at SearchReports/populateDocumentList()
at SearchReports/__ReportsDelegate5_result()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc::AbstractService/dispatchEvent()
at mx.rpc.remoting.mxml::RemoteObject/dispatchEvent()
at mx.rpc::AbstractOperation/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at
::NetConnectionMessageResponder/NetConnectionChannel.as$37:NetConnectionMessageResponder: :resultHandler()
at mx.messaging::MessageResponder/result()
Can anybody let me know what could be the reason?
Regards,
-Sameer -
Dear Sirs,
during loading of master data from a 4.6C SAP system to BI 7.0 SP9 I get the following error during processing (data packet).
<i>"An RFC call-up triggered the exception (ID: RSAR NO: 503) "</i>
The strange thing with this error is that it emerged today, after successfully loading master data and a subset of transaction data yesterday from same source system.
Has anyone else come across this error, and can tell us where we should look for a possible solution? (or a better error explaination).
The RFC connections works fine when testing in SM59, and was functioning yesterday. No relevant dumps in either system.Hi folks,
I am also interested in this error.
Thanks. -
Database.LoadDataSet() method is throwing error during retriving data from empty table of IBM DB2 database. It is giving error code "SQL0100W".
“Error Message: 0NO_DATA [02000] [IBM] [DB2 / NT] SQL0100W FETCH, whether there is a line to be UPDATE or DELETE, or of the query result is an empty table .
SQLSTATE = 02000”Hello SharayuPandit,
For issues regarding DB2, i suggest that you could post it to DB2 related forum:
https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000000842
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hexadecimal error during activation of DSO from datasource
hi guys,
im facing this error during DSO data activation:
Value '"1st anniversary,birthday & staff party"' (hex. '2200310073007400200061006E006E00690076006500720073') of characteristic ZTXOSIK1 contains invalid characters
is there any routine that i can put in transformation to fix this error.. please advice.Hi,
Long back i faced this Hex Values issue, i used the below code in the charecterictic routine of transforamtions
my source field was: TXZ01
my target infoObject was : ZMAT_TXT
please find the code below which i used, first read it and do the needful changes as per your requirement
FIELD-SYMBOLS: <ic> TYPE x.
DATA: hex_count LENGTH 2 TYPE n.
DATA: char_count LENGTH 2 TYPE n.
DATA: x8 LENGTH 2 TYPE x.
DATA:
hex1(64) TYPE x VALUE
'00000020000100200002002000030020000400200005002000060020000700200008'
'002000090020000A0020000B0020000C0020000D0020000E0020000F0020',
hex2(64) TYPE x VALUE
'00100020001100200012002000130020001400200015002000160020001700200018'
'002000190020001A0020001B0020001C0020001D0020001E0020001F0020'.
IF SOURCE_FIELDS-txz01 = ' '.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
RESULT = SOURCE_FIELDS-txz01.
hex_count = 0.
char_count = 0.
0000---001F
ASSIGN RESULT TO <ic> CASTING TYPE x.
DO.
MOVE <ic>+hex_count(2) TO x8.
SEARCH hex1 FOR x8 IN Byte MODE.
IF sy-subrc <> 0.
SEARCH hex2 FOR x8 IN BYTE MODE.
IF sy-subrc = 0.
result+char_count(1) = ' '.
ENDIF.
ELSE.
result+char_count(1) = ' '.
ENDIF.
IF hex_count < 78.
ADD 2 TO hex_count.
ENDIF.
ADD 1 TO char_count.
IF char_count >= 40.
EXIT.
ENDIF.
ENDDO.
Regards
Reddy A -
Error during sync : Mobile Service
I am getting the following error during sync
Data processing at the server is still in progress. Try again.
Any ideas as to what could be wrong?Hi,
I guess nothing is really wrong. It seems as if the server is till processing data for your device. If you sync meanwhile, the server wnats to tell you that it is currently working to prepare data fro you, if you resync in a while, you should get your complete data.
Cheers, Stefan
Maybe you are looking for
-
How do I share one music library between multiple users on windows 8
we just got our first windows 8 latop for the family. I'd like to have one drive that has the sum of all the music for the house, so I'm looking to cosolidate the itunes purchases, a few laptops, three shuffles, an iphone, and an ipad. i'd also like
-
Missing resolution lines system preferences-- display
Hi, I've recently got a mac mini which I've got hooked up to a Samsung syncmaster 205BW (which has a native resolution of 1680x1050) Initially when I set it up I had no problems getting that resolution set in Mac OS X, however I've put it on a KVM wi
-
Script/Automator action/CSS to change text encoding?
As an expat Israeli, I read an Isareli newspaper online every day. Most pages on their site <http://www.haaretz.co.il> display fine with the text encoding set to Default. Some, though, forget that Hebrew is written right-to-left, and insist on displa
-
DatabaseProcedure with return type prefixed with schema name
Hi (Paco) I have a question about the DatabaseProcedure class. We are using Oracle proxy users for our database connections. Everything is accessed via a database role that are granted to the logged on user. All our database objects, tables etc are p
-
i am using only 2 plug-ins for now,called BFD acoustic drum module by fxpansion and ivory by synthogy. using the activity monitor i have been trying to find out what is causing logic to freeze.it shows the dock shooting as high as 15% CPU for short b