Error during distribution for compiled codegeneration
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
I was able to resolve this. The error seems to be very misleading.
Actual problem was with the configuration of Accounting Codes and Valuation areas. The currency of the company code was wrongly mentioned for the US GAAP valuation area. Instead of putting in the company code currency which is AUD for us they put in the Group currency which is USD.
Thanks,
Raj
Similar Messages
-
Error during distribution for compiled code generation-Reply
Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a® -
ICal yields "Error during PUT for mailto:valid@email: iMIP request failed"
Hello,
I'm trying to bring up an iCal server (using Mac OS X Lion 10.7.3 Server on a Mac Mini). The basic configuration runs fine. But when I tried to enable eMail invitations, I got stuck with those messages in the error log:
[twistedcaldav.scheduling.imip#error] Could not do server-to-imip request : <twistedcaldav.scheduling.imip.ScheduleViaIMip object at 0x10075e5d0> User timeout caused connection failure.
[twistedcaldav.scheduling.scheduler.ScheduleResponseQueue#error] Error during PUT for mailto:valid@email: iMIP request failed
My configuration settings:
calendar:Scheduling:CalDAV:EmailDomain = ""
calendar:Scheduling:CalDAV:HTTPDomain = ""
calendar:Scheduling:CalDAV:AddressPatterns = _empty_array
calendar:Scheduling:iMIP:Sending:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Sending:UseSSL = no
calendar:Scheduling:iMIP:Sending:Username = "valid@email"
calendar:Scheduling:iMIP:Sending:Address = "valid@email"
calendar:Scheduling:iMIP:Sending:Password = "safe_password"
calendar:Scheduling:iMIP:Sending:Port = 25
calendar:Scheduling:iMIP:Enabled = yes
calendar:Scheduling:iMIP:MailGatewayPort = 62310
calendar:Scheduling:iMIP:Receiving:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Receiving:UseSSL = yes
calendar:Scheduling:iMIP:Receiving:Username = "valid_email"
calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
calendar:Scheduling:iMIP:Receiving:Type = "imap"
calendar:Scheduling:iMIP:Receiving:Password = "safe_password"
calendar:Scheduling:iMIP:Receiving:Port = 993
calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
calendar:Scheduling:iMIP:MailGatewayServer = "valid.mail.server"
calendar:Scheduling:iSchedule:Enabled = no
calendar:Scheduling:iSchedule:Servers = "servertoserver.xml"
calendar:Scheduling:iSchedule:AddressPatterns = _empty_array
It does not even try to connect to the given smtp server. How do I proceed?I dug into the sources, and am now smarter
the above settings are invalid, because of the gateway (this has to be iCal itself):
calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
Now the IMAP server is being asked, but now I have the next problem:
[mailgateway] 2012-03-27 11:14:37+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] Scheduling next IMAP4 poll
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready.
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP servergreeting
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0001 AUTHENTICATE PLAIN
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: +
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 1GNhbEwhZHNwZXJ0LmRlAFlpZXE5YW==
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0001 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP authenticate failed for valid@email, trying login
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0002 LOGIN "valid@email" "valid_password"
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0002 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#error] IMAP login failed for valid@email
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] IMAP factory connection lost -
Error during search for WM movement type (999 E )
Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arifHi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari -
Error during search for WM movement type (911)
Hi gurus,
I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
"Error during search for WM movement type (911)"
any idea of this message?
Thanks in advanceThe probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
Lakshman -
Error during search for movement type (953)
Hi All,
When I'm trying to issue goods to an internal order, I get the below error
Error during search for movement type (953)
The explanation is as follows
The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
Is there some config missing in this case?? Please let me know how to overcome this error
Regards,
Ashwinwhen you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
This customizing needs to be done in IMG > LE > WM > Activities > transfers > define movement types
and
IMG > LE > WM > interfaces > inventory management > define movement types -
Error during search for WM movement type (652 1 L )
Hi Guys,
For return order,we have created return delivery and PGR,Material Doc was created in the background TR and TO also created.Confirmed the TO.
Now we trying to reverse the PGR and Delivery from Transaction VL09,we are getting the following error.
Error during search for WM movement type (652 1 L )
Please reply ASAP,it's very urgent
Regards,
Kiraninsert this entry, it will work.
regards,
Yu -
WM-Error during search for WM movement type (261 )
HI FRIENDS
I HAVE THE ERROR DURING GOODS ISSUE FOR PRODUCTION ORDER...
PLS SUGGEST ME TO SOLVE THIS ISSUE
Error during search for WM movement type (261 )
Message no. L9 005
Diagnosis
A movement type of the Warehouse Management system and certain parameters are assigned to each movement type of the Inventory Management system.
In this case, no movement type of the Warehouse Management system was assigned to the Inventory Management movement type used by the parameters enclosed in parentheses in the error message.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
WIHT REGARDS
DINESHHi,
The IM and WM linkage may not be proper for the movement type. Maintain an entry for your warehouse with movement type 261 and Movment Indicator l combination in transaction OMLR. In the "Assign WM Movement Type References to IM Movement Types" section (button), change the "Reference Movement Type WM" to 261 (to match "Reference Mvmt Type" under button LE-WM "Interface to Inventory Management")
And also .....
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location. I hope this will help you. Thanking you. -
SAP_BASIS IMPORT_PROPER Error during SPAM for CRM Upgrade
Hi All,
During SPAM IMPORT_PROPER for component SAP_BASIS, encountered error. Checking the Import Logs of the queue, we see error logs in Activate inactive runtime objects. Sample message below.
May we ask how to fix the error for us to be able to continue the upgrade? Thanks.
Activation of sample nametabs with appended fields
06:17:30: Retcode 512: error in DDL statement for ALCCMCUSTP - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of ALCCMCUSTP
06:17:42: Retcode 512: error in DDL statement for ALCCMCUSTV - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of ALCCMCUSTV
06:17:55: Retcode 512: error in DDL statement for ARC_DESTR_VETO - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of ARC_DESTR_VETO
06:18:07: Retcode 512: error in DDL statement for DB6_OPTPROFILE - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of DB6_OPTPROFILE
06:18:19: Retcode 512: error in DDL statement for FDT_TRACE_0200 - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of FDT_TRACE_0200
06:18:31: Retcode 512: error in DDL statement for FDT_TRACE_0201 - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of FDT_TRACE_0201
06:18:43: Retcode 512: error in DDL statement for GE071KF_OLD_NT - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GE071KF_OLD_NT
06:18:55: Retcode 512: error in DDL statement for GTABKEYEXC20 - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEYEXC20
06:19:07: Retcode 512: error in DDL statement for GTABKEY_CASCADE - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_CASCADE
06:19:19: Retcode 512: error in DDL statement for GTABKEY_COMPEXCL - repea
t
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_COMPEXCL
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_COMPSETS
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_C_SYS
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of GTABKEY_EXT
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXU
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXUT
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXU_C1
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of IACXU_C_TEMP
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of STORE_HELP
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of STORE_LINK_IND
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of SWWOUTBOX
Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
Error in DDL statement for when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of SWWWITEXT
21 shadow nametab activations resulted in errors
Begin: Activation of shadow nametabs with DDL (2014/03/19 06:17:30)
End: Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
Begin: Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
(dummy, do not translate)
Regards,
PhilipHi Philip,
Could you please check the below SAP Note. It is a composite notes which has listing of various errors during upgrade
822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Hope this will be useful
Thanks and Regards
DJ -
Error during MIRO for tax code .
Dear All ,
User is doing MIRO but an error comes as " Tax code V0 does not exist in TAXINN " , here i need to tell u that what had happened that in P.O the material is not charged with any tax , so user have given tax code as V0 , but he had forgotten to maintain cond for BED non cenvatable % so he had made the cond. record in FV11 , Here my querry is that during MIRO the tax code V0 without cond record gives error from where the system is not capable to fetch the data ?
OR is there any check so that in such cond. the error should be like this " No cond record is maintained for V0." instaed of
" Tax code V0 does not existsin TAXINN "
Rgds
sap12U need the user should assign tax code V0 for non-taxable materials.
Error what it giving is correct. U should assign this V0 to ur tax Procedure TAXINN.
Path to Assign
Spro - IMG - Financial Accounting(New) - FA Global settings - Tax on Sales/ Purchase - Calculation - Taxcodes for Tax-Excempt Sales.
Procedure - TaxCode - Reason
If ur not able to solve the problem, Send me ur requrement clearly.
Subramanian.R -
ORA-00955 Errors during R3load for WEB AS Abap 6.40 installation
Dear Gurus,
I am encountering a problem during the R3load phase of the WEB AS ABAP 6.40 DB instance installation; I have patched the Oracle Database using the 9.2.0.7 patch set beforehand and resumed the SAPINST. There after errors occur during the DB load phase, below are the logs for reference (there are multiple occurences of 'ORA-00955: name is already used by an existing object' in existing logs)
/sapmnt/P21/exe/R3load: START OF LOG: 20080627032739
/sapmnt/P21/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/sapmnt/P21/exe/R3load: version R6.40/V1.4 [UNICODE]
/sapmnt/P21/exe/R3load -ctf I /sapcd/NetweaverSR1_Export/EXP3/DATA/SAPDODS.STR /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC
/DB/DDLORA.TPL /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.TSK ORA -l /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_O
RA_UC/DB/SAPDODS.log
/sapmnt/P21/exe/R3load: job completed
/sapmnt/P21/exe/R3load: END OF LOG: 20080627032739
/sapmnt/P21/exe/R3load: START OF LOG: 20080627032814
/sapmnt/P21/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/sapmnt/P21/exe/R3load: version R6.40/V1.4 [UNICODE]
/sapmnt/P21/exe/R3load -dbcodepage 4102 -i /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.cmd -l /tmp/sapinst_inst
dir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(rscpsumg) Please look also into "/tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS001.xml".
(DB) ERROR: DDL statement failed
(CREATE TABLE "RSDMODSTAB" ( "CHARACT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "ATTRIBUTE" VARCHAR2(3) DEFAULT ' ' NOT NULL ) TA
BLESPACE PSAPP21 STORAGE (INITIAL 16384 NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 102
(SQL error 955)
error message returned by DbSl:
ORA-00955: name is already used by an existing object
(DB) INFO: disconnected from DB
/sapmnt/P21/exe/R3load: job finished with 1 error(s)
/sapmnt/P21/exe/R3load: END OF LOG: 20080627032815
/sapmnt/P21/exe/R3load: START OF LOG: 20080627035407
/sapmnt/P21/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/sapmnt/P21/exe/R3load: version R6.40/V1.4 [UNICODE]
/sapmnt/P21/exe/R3load -dbcodepage 4102 -i /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.cmd -l /tmp/sapinst_inst
dir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.log -stop_on_errorHello,
Strange error, check if you didn't run out of space. If this is new installation, nor upgrade or migration, I would suggest to you drop the table and re-run export once more.
Otherwise you can open message to SAP as you can expect that this will happen also for other tables. Looks table or tables exist at Oracle but sapinst don't have info about it
Peter -
Getting compile time errors during gwt application compilation
Hi,
I am getting below compile errors while running ant script for my GWT application.
javac:
[javac] Compiling 32 source files to D:\Projects\workspace\MckSurvey\war\WEB-INF\classes
[javac] D:\Projects\workspace\MckSurvey\src\com\spinsci\survey\client\model\QuestionBean.java:38: type parameters of <X>X cannot be determined; no unique maximal instance exists for type variable X with upper bounds int,java.lang.Object
[javac] return get("questionId");
[javac] ^
I am using JDK 1.6 and ANT 1.7 s/w.
below is the target which is used in the build file:
<javac srcdir="src" includes="**" encoding="utf-8"
destdir="war/WEB-INF/classes"
nowarn="true"
debug="true" debuglevel="lines,vars,source"
includeDestClasses="false"
source="1.5" target="1.5"
>
<classpath refid="project.class.path"/>
<compilerarg value="-Xlint:-unchecked"/>
</javac>
Please suggest me accordingly to overcome this generics compile time errors.
Regards,
Sunder.dannyyates wrote:
There are/have been numerous examples of differences in spec interpretation between Eclipse (ecj) and the Sun compiler. I generally find that Eclipse is more accurate in it's interpretation than Sun! :-)
I would suggest raising this on an appropriate Eclipse forum. The guys there are normally very good at digging into the issue and explaining why they think they are right or else admitting that they've got it wrong.I totally agree on both accounts. I myself have seen at least two compiler bugs and asked both the Sun guys and the Eclipse guys (through their respective bug tracking systems) and both have been resolved (in both cases ecj was actually right, but I wouldn't dare drawing any conclusions from that ;-)). -
ERROR DURING MIRO FOR PLANNED DLV. COST.
Dear All,
pl help me out i have to do MIRO for a P.O for
planned delivery cost but here an error is occurred as ---> Error in account determination: table T030K key 1000 JI6 V0Message no. FF709
Diagnosis
In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
Procedure
Contact your system administrator.
Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
To do this, choose Maintain entries (F5).
sap11Hi
Please check the account settings for the tax code.
in FTXP put your tax code , country key. In the details select the line in which rate is maintained & click on Tax Accounts
If no account is maintained, Maintain the same .
You can also maintain the tax accounts in T.code OB40 under the Acct key used such as VST, MWS etc... whcih you hyave assigned to the Condition types in the Taxcing procedure.
In OB40 maintain the Tax code & Tax account.
Thanks & Regards
KK -
while doing GR for asset PO system is giving error message of "Acct123 for trans/ev key ANL, is not a control account
some one plz explain me the reason for this error and how to resolve.Hi,
You are posting asset through MIGO so GL acocunt being debited for asset has to be Asset Reconciliation Account.
Use ME23N and check GL account for Account assginemnt category A whether GL is control one.
Or you can also check in AO90 that the GL assgined to account determination for particular asset class for depreciation areas is reconciliation one or not.
Check whether u had maintianed GL account for ANL transaction event key in OBYC t.code
Regards,
KK -
ERROR DURING MIRO FOR IMPORT P.O.
Dear All ,
i m doing MIRO for import P.O , here i m doing MIRO for CVD (in USD) only , but as i m about to post the I.V an error arise as -->"Tax code V0 country IN does not exist in procedure TAXINN
Message no. FF713
But in FTXP i have checked that V0 ( input tax ) is maintained here , pl help what else i have to check to resolve the issue .
sap11Maintain the missing entry with the transaction OBQ2:
Access sequences - mark 'MWST', pushbutton 'Accesses'.
Maintain the new entry on the screen 'Accesses' for the access sequence 'MWST':
AcNo. = 10, Tab = 3 (Tax code), Requirement = is blank,
Exclusive = not active.
The following should be displayed as fields for the access to MWST and table 3:
Condition, Doc.struc., Doc.field, Long key word, Direct value I
ALAND KOMK ALAND Country (blank) (blank)
MWSKZ KOMP MWSKZ Tax code (blank) (blank)
OR
OSS Note 504400
You enter a document with Transaction MIRO, with reference to a multiple account assigned purchase order. Different control indicators are entered in the account assignment items. The document contains unplanned additional costs which are distributed to the individual account assignment items. The system displays error message: FF713 'Tax code & country & does not exist in procedure &'.
Other terms
MIR7, multiple account assignment, T169P, MR1M
Reason and Prerequisites
The problem is caused by a program error.
Solution
Corrected for Release 4.7 and included in R/3 Support Package for Release 4.0B, 4.5B, 4.6B and 4.6C. Advance correction: See the "Corrections" section.
Maybe you are looking for
-
How can I access the member of a cluster on the front panel by selecting the label?
I have a cluster of Controls. i would like to choose the element of the cluster by his label on the front panel and then show the value. Does anyone have an idea?
-
Error when using javax.script package
Hi I want to call a javascript method from a .js file from .java class. when i searched, i came to understand that using jdk1.6 i can use javax.script package tht provide me what i needed. using the reply i got from i earlier post, i tried one exampl
-
Hello How do we deal with Letter of credit, Bills of exchange, Post date checks and Guarantees. I understand that we use the special gl transactions and statistical postings to take care of these. What I want to understand is how the accounting proce
-
After starting Aperture with Command+Option keys, and being presented Photo Library First Aid, then choosing Repair Database radio button, then clicking on Repair --- I am presented with a dailogue: "This library has been opened with a newer version
-
Mac shares on a Windows 2000 Server
I run a Windows2000 server with mac shares for my department. For some reason I have a file name length restriction of 31 characters (including the file extension). This is not a restriction on the Windows Server itself nor is it a restriction on any