Error during Extraction in RSA3.

Hi,
I have activated the datasource 0JOB_ATTR in R3 site. I can see it in RSA6 but when I try to extract data from RSA3 it is giving an error message like : Errors occurred during the extraction..
Any help on this highly appreciated..
Regards
Uday

0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the following:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data".
Hope it helps.

Similar Messages

Errors occured during extraction at RSA3

hi
i am giving these datasource and get data at rsa3, its giving error like error occured during extractions?
can u please let me know what could be the reason?
0CO_PC_PCP_03
0CO_PC_PCP_04

Hi,
Check the Log in RSA3, youca n find log and see it and correct it.
Steps:
1. Inastall DS in RSA5
2. Check in RSA6.
3. Extract in RSA3.
Thanks
Reddy

ERRORS OCCURED DURING EXTRACTION USING RSA3

Dear Folks,
I have an error in production client & that is when i am doing test extraction for standard datasource using RSA3 i am geting following error:ERRORS OCCURED DURING EXTRACTION.
I checked the log and message is extraction program failed as it is called by an invalid infosource or object 0crm_lead_h.
note:0crm_lead_h is the DS
Any help
Thanks

Hi ,
Please follow below thread , it will solve ur problem.
Errors occurred during the extraction, Message nos. RJ012 & R3009
Hope this will help you...
Thanks,
Jitendra

Error in Extraction through RSA3

Hello,
I am trying to extract data from my DataSource through RSA3, but Iam getting Error while Extraction data,.
The display log error says"S:RSSDK:300 [DataDirect][SQLServer JDBC Driver]Object has been closed."
Regards,
Mayank
Points -> Thanks

The setting are fine. we have already checked that.
If we delete our Infosource, is the FM created though this also gets deleted from the Function Group.
Please let me know what else can be done on this error issue.
Regards,
Mayank

Error during extraction with UD Connect

Hi All,
I established connection to my source system through UD conenct and it is successful. The check on Source systems is fine and SM59 check is fine. However when I try to create a datasource and in the Extraction tab, click on the Source Object selection, I get the error:
"Error while extracting field list of UD Connect object: UDCADAPTERROR::RSSDK|200|Cannot open the connectio"
Can you please help me?
thanks
Lupita

Hi,
This error is related to JCo connection, tell BASUS person to look into this error, they may restart JCo services. check connection on datasource and try loading
Regards,
Daya Sagar

Error getting extraction in RSA3 0EMPLOYEE_ATTR Datasource

When I try to get an extraction in Transation RSA3 for the Datasource 0EMPLOYEE_ATTR I am getting
this error message "Feature ANSAL has not been activated yet".
Feature ANSAL has not been activated yet
Message no. P0604
Diagnosis
The feature must be generated before use.
Procedure
Start transaction PE03 and generate the feature
When I go to trans. PE03 ANSAL is already activated.

Hi,
Can you please check these threads relevant to the issue::
http://forums.sdn.sap.com/thread.jspa?threadID=1372563
http://forums.sdn.sap.com/thread.jspa?threadID=1475831
http://forums.sdn.sap.com/thread.jspa?threadID=1443547
Regards,
Arpit

Error during extraction data from APO system

HI Gurus,
We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
When we checked it is working fine in dev environment.
Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
Could anybody throw some light on this issue.
Tnx in advance.
Guru

Hi,
Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
And
Has replication been done in BI side for the same.
Rgds
SVU
Edited by: svu123 on Sep 24, 2009 7:50 AM

Error during Extraction in R3

Hello Experts,
In R3 when i check Datasource 0FS_CTR_NO_ATTR in RSA3 transaction , i get error message saying "package size increased to 10000 " amd messge no is FVD_BW010.
please let me know the problem area and help me out to solve it out.
thanks in adv.
Bhavna.

Hi Nanda,
This datasource only supports delta extraction and you probably get this
strange message because the change pointers are not active.
If you want to use the delta extraction you have to activate the change
pointers in the customizing. You can activate the change pointers in
Customizing under 'Loans Management -> Basic Settings -> Installation
Parameters -> Define General Installation Parameters' and set the Flag
'Change Pointers Active'.
After the activation of the flag the extraction should work as expected.
Please also implement Note 989550. This will not solve the problem, but
you will get an error message, if the change pointers are not active.
If you try and check the datasource in RSA3 you probably still
get a different error as it does not support full updates
(Mode F).
Please start a delta initialization in your BW system, and after it
you can start the delta loads. The full upload is not intended for this
datasource.
Best Regards,
Des.

Error during extraction through InfoSource: 0CO_OM_OPA_1

Currently we are extracting the data from SAP R/3 System into BW System through InfoSource 0CO_OM_OPA_1 (Orders: Costs and allocations)which is a part of the process chain. But we are getting the error as follows:
Idocs missing: No selection information arrived from the source s
Diagnosis
Background processing has not been completed in the source system. A short dump has most probably been logged in the source system.
System response
No selection information arrived from the source s
Procedure
Look for the short dump belonging to your data request in the short dump overview in the source system. Be sure of the correct date and time in the selection screen.
You can get the short dump list using the Wizard or from the monitor detail screen via the path "Environment -> Short dump -> Source system".
We have also checked the short dump in R/3 Production System, we are geeting following error details:
Runtime Error DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
An SQL error occurred when accessing a table.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"REOM_OM_READ_COSP_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"REOM_OM_READ_COSP_DATA"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-01652: unable to extend temp segment by 2560
in tablespace PSAPTEMP"
Internal call code.........: "[RSQL/FTCH/COSP ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLREOM " or "LREOMU08 "
"REOM_OM_READ_COSP_DATA"
After this we have also extend temp segment by 2560
in tablespace PSAPTEMP" and after that we have loaded the data manually but we are getting same eror, how to solve this problem. So, please help us to slove this problem.
RAJESH GIRIBUWA

Hi,
it seems that was a lack of space table problem.
This DBIF_RSQL_SQL_ERROR comes due to lack of table space .. If you package didn't finish yet, please execute ST22 and SM21 and look for errors and dumps.
U can catch the error in ur program. this error occurs whenever database access exceeds some limit & the error is fired.
This should point you to the DB issue... frequently a table space issue.
Also take a look on the note :590370
check oss note
840552
Symptom
On BW tables that belong to an InfoCube, statistics are calculated (COMPUTE) instead of estimated with the set percentage (ESTIMATE). This results in high runtimes.
Other terms
InfoCube, database, Oracle statistics
Reason and Prerequisites
In the Oracle-specific RSDU_ANALYZE_TABLE_ORA BW function, in some situations an estimation is made as to how many records are in the table to be analyzed. A SELECT in the USER_TABLES table is specifically used for this. If there is no value there now, 0 is returned and a COMPUTE is carried out. COMPUTE is considerably fasterer than ESTIMATE on small tables (under 10000 approximately).
However, if the table is too big and if the statistics were deleted by a brconnect run that ran shortly beforehand, the above situation of long runtimes mentioned above can occur.
Solution
BW 3.0B
Import Support Package 27 or 3.0B (BW3.0B Patch 27 or SAPKW30B27) into your BW system. The Support Package will become available oncenote 723258 with the short text, "SAPBWNews BW3.0B Support Package 27", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
Import Support Package 21 for 3.10 (BW3.10 Patch 21 or SAPKW31021 ) into your BW system. The Support Package will become available once <Z1>note 723263 with the short text, "SAPBWNews BW3.1 Content SP 21", which describes this Support Package in more detail, is released for customers.
BW 3.50
Import Support Package 13 for 3.5 (BW3.50 Patch 13 or SAPKW35013) into your BW system. The Support Package will become available oncenote 783254 with the short text, "SAPBWNews BW SP12 NetWeaver'04 Stack 13", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide information in advance, the notes mentioned may already be made available before the Support Packages are released. However, the short text in this case will still contain the words "Preliminary version".
DBIF_RSQL_SQL_ERROR
/message/1599520#1599520 [original link is broken]
Error : DBIF_RSQL_SQL_ERROR
-Shreya

Error During Extraction

When I try and extract data from a base install of OrgChart 2.1, I get an error on the Organizational Assignment table:
ERROR: BAPI_SAP_OTFProcessor_Report_Lite : [NakisaHRConnector.NakisaRfcReport]: Error when converting a numeric field to XML.
Has anyone seen this error before and what causes it?

Hi Luke,
Can you verify if the error is happening when it's outputing the table EmpOrgAssign.
If this is the case, can you verify in the downloadschema.xml, the function should look like this:
<xmp>
<function name="RfcReadTable" critical="True" encoding="UTF8">
     <download>True</download>
     <desc>Nakisa.SAP.Custom.OTFProcessor</desc>
     <dll>Nakisa.SAP.Custom.OTFProcessor</dll>
     <class>Nakisa.SAP.Custom.OTFProcessor.BAPI_SAP_OTFProcessor_Report_Lite</class>
     <params>
          <param name="FIELDLIST"><![CDATA[PERNR,ENAME,SNAME,BUKRS,ORGEH,KOKRS,KOSTL,PERSG,PERSK,PLANS,STELL,WERKS,BTRTL,BEGDA,GSBER,ABKRS,FKBER]]></param>
          <param name="CONDITION"><![CDATA[BEGDA <= '[DateToday]' And ENDDA >= '[DateToday]']]></param>
          <param name="SOURCETABLE"><![CDATA[PA0001]]></param>
     </params>
     <outputTables>
          <outputTable name="EmpOrgAssgn" critical="True" encoding="">
               <source>PA0001</source>
               <desc>Organizational Assignment</desc>
               <fields>
                    <field name="PERNR" encoding="ASCII">
                         <alias>Pernr</alias>
                    </field>
                    <field name="ENAME" encoding="">
                         <alias>EmpNameF</alias>
                    </field>
                    <field name="SNAME" encoding="">
                         <alias>EmpName</alias>
                    </field>
                    <field name="BUKRS" encoding="">
                         <alias>CompanyCode</alias>
                    </field>
                    <field name="ORGEH" encoding="ASCII">
                         <alias>OrgUnit</alias>
                    </field>
                    <field name="KOKRS" encoding="">
                         <alias>ControllingArea</alias>
                    </field>
                    <field name="KOSTL" encoding="ASCII">
                         <alias>CostCenter</alias>
                    </field>
                    <field name="PERSG" encoding="ASCII">
                         <alias>EmployeeGroup</alias>
                    </field>
                    <field name="PERSK" encoding="">
                         <alias>EmployeeSubgroup</alias>
                    </field>
                    <field name="PLANS" encoding="ASCII">
                         <alias>Position</alias>
                    </field>
                    <field name="STELL" encoding="ASCII">
                         <alias>Job</alias>
                    </field>
                    <field name="BTRTL" encoding="">
                         <alias>PersonnelSubarea</alias>
                    </field>
                    <field name="WERKS" encoding="">
                         <alias>PersonnelArea</alias>
                    </field>
                    <field name="BEGDA" encoding="">
                         <alias>StartDate</alias>
                    </field>
                    <field name="GSBER" encoding="">
                         <alias>BusinessArea</alias>
                    </field>
                    <field name="FKBER" encoding="">
                         <alias>FunctionalArea</alias>
                    </field>
                    <field name="ABKRS" encoding="">
                         <alias>PayrollArea</alias>
                    </field>
               </fields>
               <condition><![CDATA[]]></condition>
          </outputTable>
     </outputTables>
</function>
</xmp>
Edited by: Andrew Kwok on Jun 15, 2010 5:23 PM

Error occurred during extraction in r/3 ( loans data sources)

Hi,
for Data source 0CML_Delta
Iam getting 0 records when i check the extraction checker in RSA3. i have used Delta Update mode.
Even in BI it shows 0 records for delta load.
i have done the change pointer activation and even updated the dynamic infosource as suggested in SDN threads.
but still shows 0 records.
For full load iam getting 'Error During Extraction'.
Is there any specfic procedure to follow for this?
Can any one suggest me the correct procedure?
regards

Hi
Try Extracting data in debugging mode and check whether there is nay data getting filled in the tables. If not then probably check out the logic written once again,it is also possible that there may be no new data.
Regards
Raj

0PM_PRM_PLCS_1 error occured during extraction

Dear gurus ,
i have make entry im pm_c05 table and extract the data first time ,it works fine .when i again try to load data it give me error .i have checked in rsa3 and while extraction it is giving error " Error occured during extraction " . our bi is is on 7.0 and erp 0n ehp 6.4 .i have implemented the sap note 0001243299 but again gettinng the same error.please help me out

Hi Faisal:
I've found a long list of SAP Notes that might be applicable to your environment, even though it is not mandatory to implement all of them to solve the issue you're facing right now, please consider the convenience of installing them on your system to fix some potential problems in advance.
Note 1344048 - "0PM_PRM_PLCS_1: Delta upload does not work as expected"
Note 1285238 - "0PM_PRM_PLCS_1: Errors during extraction, poor performance"
Note 1323965 - "0PM_PRM_PLCS_1: Calculation for services"
Note 1338093 - "0PM_PRM_PLCS_1: Execution factor not taken into account"
Note 1339189 - "0PM_PRM_PLCS_1: Error occurs for alternative indicator"
Note 1340188 - "0PM_PRM_PLCS_1: Revision of the calculation module"
Note 1312783 - "0PM_PRM_PLCS_1: Implementing additional fields"
Note 1314158 - "0PM_PRM_PLCS_1: Incorrect result during extraction"
Note 1356256 - "0PM_PRM_PLCS_1: Poor system performance with strategy plans"
Note 1416214 - "Overlap of records due to key constraints in 0PM_DS07"
Note 1446484 - "Planned costs, costing, ECP: Incorrect message KI 217"
Note 1508442 - "ECP, extractor 0PM_PRM_PLCS_1: error ME024 or ME025"
Regards,
Francisco Milán.

CRC Error during Install

I'm trying to install WebLogic 7.0 SP 1 on a Red Hat 9 box, and getting
CRC errors. Any ideas? I've tried SP1, SP2, WebLogic 8.1 (though I
need 7.0 SP 1, was just trying the newer version), both the net
installer and package installer, all are giving me CRC errors... Help?
-Brasten Sager

Hi.
I just performed a successful download of the linux installation. Pls try again - if that fails again then you should contact support.
Regards,
Michael
Perry Hoekstra wrote:
I am attempting to install WLS 7.0 on a RH 7 box and I am receiving the following
error:
Extracting 0%.................................................................................................../tmp//fileRwW818/wls7000_linux.jar
bad CRC 4b7429eb (should be 019fdd07)
100%
** Error during extraction, error code = 2.
Thoughts?
Perry Hoekstra--
Michael Young
Developer Relations Engineer
BEA Support

RSA3: error occured during extraction hierarchy

Hi,
I have created 2 sets using tcode cxsa, ZAAA and ZBBB. Table that used for this set is FIMC and the field is RBUNIT. After that, i create generic hierarchy datasource using tcode BW07, enter the table name and field,then execute (custom data source with name 'ZFIECCS_HIER_CONS_UNIT' created). I don't use option 'Hierarchies of Sets with Compounding' here.
After that i try to use tcode RSA3, enter the datasource = ZFIECCS_HIER_CONS_UNIT, enter HIENAME = ZAAA or ZBBB but i get message error 'Error occured during extraction'.
I try to debug this extractor and find error happen in FM GSBH_HIERARCHY_TRANSFER_SETS, this happen because i_s_hiebas-hclass <> i_s_hiersel-hclass.
Then i try to execute program RSA1HCAT using tcode SE38. I enter my datasource and execute. I found that ZAAA and ZBBB not in list of hierarchy that can be accessed.
Anyone can help my problem?
Regards,
Satria Budiman

Hi,
Go to RSA6 and see if data source is using the correct version or not.you can select the data source and click on chek option on the top and see if its any error.
If it is dump then there is no other option but to retransport it again.
try to see if the extract struture used by this data source is active or not??
See if you are getting the error in the test systems also or not.
Issue could be with the reallignment also where a controlling master data is changed.
Thanks
Ajeet

Error occured during extraction from APO to BI 7.0

Hi Experts,
I am in the process of extracting data from SCM(APO-Demand Planning) to BI .I have selected the relevant planning area 9ADP01 and given Generate Export DS in APO system and replicated the same in BI.But before scheduling the InfoPackage,when i checked for the DS 9A0APO_DP_ORDERANALYTICS_1,it displays "Error occured during extraction".I do have a doubt whether I should activate the DS in RSA5 before replication (but am not able to find the DS under DP in RSA5)
I have checked the forums but solutions mentioned did not resolve my issue.
Thanks,
Meera

Hi,
The issue is resolved...
Regards,
Meera

Error during Extraction in RSA3.

Similar Messages

Maybe you are looking for