Error during factory reset

Hello . 
while iam trying to reset my laptop to factory condition i always get restoration incomplete message 
details "  there is might be unexpected rebooting during BBV clean or last 
the process will cause CTO panic becouse the image might be not be normal " 
retry button start process form the begin 
my laptop is pavilion g6 1160  workink on win 7 home primuim 64 bit and i am recavering using recavery disc

Hi  ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g6-1160ee Notebook with issues with a Recovery from your restore disks. Here are links to recovery may fail and troubleshooting recovery problems. You might need to disable any virus protection software to do this. Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.Please let me know how this goes. Thanks.

Similar Messages

  • Iphone turned off during factory reset

    Apologies if this has been raised a million times before, i have tried to search for an answer..
    As the title says my phone turned off during a factory reset as the battery was obviously low. probably happened 1-2 minutes into it actually.
    Now it wont get past the apple logo screen. I have tried to reset the phone using the home + power key but nothing happens. it turns off then when i turn it back on it goes back to the apple logo screen, then will turn off.
    Ive plugged the phone into my laptop and that wont read it either.
    I hope i havent ruined the phone by it turning off during factory resetting ? Can anyone suggest anything to fix this problem ?
    thanks

    See if you force the phone into recovery mode:
    Turn off your phone: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone to turn off. If you cannot turn off your phone using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. After restoring from backup, you must sync to restore your iTunes content.

  • Error code during factory reset

    New here. Info is as following..HP Pavilion Slimline s500, 8 months old, Win7 Home Premium 64-bit, no new hardware or software added,hardwired LAN,intermediate user. 1st blue screen crash indicated display driver malfuntion-updated all drivers from windows, microsoft and display vendor. 2nd crash indicated page fault in non-page sector. 3rd crash indicated something about memory sector. Did system self dignostic with all segments as showing 'passed'. 4th blue screen indicated fatal error in BIOS. Did a system recovery (F11). After 5th crash decided enough is enough and proceeded to full factory reset with recovery discs. Near third disc completion process stopped with message..'unable to factory reset due to error 0XE0EF0003 contact HP Tech'. Now all I get on start up is a black screen. Have I missed somthing?? Thanks for any tips. 

    joeII wrote: New here. Info is as following..HP Pavilion Slimline s500, 8 months old, Win7 Home Premium 64-bit, no new hardware or software added,hardwired LAN,intermediate user. 1st blue screen crash indicated display driver malfuntion-updated all drivers from windows, microsoft and display vendor. 2nd crash indicated page fault in non-page sector. 3rd crash indicated something about memory sector. Did system self dignostic with all segments as showing 'passed'. 4th blue screen indicated fatal error in BIOS. Did a system recovery (F11). After 5th crash decided enough is enough and proceeded to full factory reset with recovery discs. Near third disc completion process stopped with message..'unable to factory reset due to error 0XE0EF0003 contact HP Tech'. Now all I get on start up is a black screen. Have I missed somthing?? Thanks for any tips. 
    Hello joell, This appears to me as a memory issue. from the description you list.
    You might try downloading and running Memtest, that can be found  Here , and see if Memtest finds any memory errors.
    If errors are found, you might try removing all but one of the memory modules and run Memtest again and see if you receive any errors. If so, remove that module and install another, and test each one individually until you have checked all the modules separately. If you manage to determine if one or more of the modules are faulty, just install the modules you know are good, and see if the system will boot.
    You may have to perform a HP Recovery Restore since this possible faulty memory may have corrupted the operating system and other programs.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • I just updated to iOS 8 on my iPad 2 and got an error then factory reset! Now I cannot see my Purchased Apps

    I just updated to iOS 8 on my iPad 2 and due to a unforeseen error on iTunes I had to do factory reset. I was using my friend's iMac iTunes to download and update, instead of OTA. Now I'm unable to see my previously purchased apps (some even discontinued that I was hanging on to as they still kind of worked)... Even after I logged into App store on my iPad (tried restoring iCloud and iTunes but no luck, somehow there isn't any backup)! I checked my App Store updates/purchases and see nothing. A forum suggested I try buying it anyway and it will say I already have it and not double charge, but I don't want to take that chance as most of these apps are over $4. I have receipts for all my purchases. Please help!

    When you do an update via a computer's iTunes the update process will backup the device (a backup doesn't contain the actual apps, just their content/settings), wipe the device, install the update, and then restore the backup - the restore would look to pick up your apps, music, films etc from the iTunes library.
    You've tried logging out (tap on your id at the bottom of the Featured tab in the App Store app) and back in and seeing if they then show in the Purchased tab, and you could also check to see if the apps are hidden from Purchased : iTunes Store: Hiding and unhiding purchases.
    If an app is no longer in the store then you won't be able to redownload it. You haven't got copies of your apps in your own computer's iTunes library and/or on your backup of your downloads/library ?

  • My phone is frozen during factory reset

    my phone froze up during a factory reset. I tried holding the 3 keys and it will reset but will freeze on samsung page and will go no further.,

    I'm sorry to read about this nykster! Which Samsung device are you using? We would like to help.
    BobbyN_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Iphone3g crashed during factory reset

    Can anyone help please? During a factory reset of my iphone3g the battery ran out of power and the reset did not complete. I am now unable to use or reset my phone. I can turn on my iphone but the apple logo appears for approx 5 seconds and then the phone turns off. itunes and my pc cannot see the phone if I connect via the usb cable. Thanks

    This will help you:
    http://support.apple.com/kb/ht1808

  • Frozen during factory reset?

    I've been having problems with my phone crashing 5x+ a day to the point of having to do a soft reset each time, so I finally did a master reset but the phone is completely frozen now. Will anything happen if I take the battery out? Everything is backed up, so I don't care about that but I'm worried about the phone not working at all.

    Pull the batter and hard reset with this method...
    Press and hold the Power button.
    If the device is non-responsive, remove then replace the battery. Refer to Battery Inserting / Removing for additional assistance.
    Select Power off.
    Press and hold the Volume Up / Down keys and the Power button simultaneuously. When the Samsung logo appears, release only the Power button.
    From the Recovery screen, press the Volume down key to select wipe data / factory reset.
    Select Home.
    Select Volume Up to continue.
    Allow the factory reset process to complete (approximately 1 minute).
    Ensure reboot system now is selected.
    Select Home.

  • My computer powered off during factory reset, and now I keep getting this error message.

    Error: F3-F100-0005.
    And then I have to turn off the computer.
    Before that I was getting this error: "Windows could not finish configuring system. To attempt to resume configuration, restart the computer." And I kept restarting it, about 5 times total, then decided to just reset to factory settings.
    Whenever I reboot, it keeps automatically going to "Loading Files", then this error message. I have tried the advice found here:
    http://laptopforums.toshiba.com/t5/System-Recovery-and-Recovery/System-Failure-and-NOTHING-Fixes-it/... but it's not working.
    Please help?

    Some laptops do not come with a recovery disc because they have hidden partition for the recovery.
    What exactly is the model of your laptop.

  • Error during password reset using self-service portal

    I am working in a poc (proof of concept) using oim with ad, exchange, sap and database application tables connectors. During some tests I noticed that password reset through oim's self-service portal works fine for ad, exchange and sap, but it fires an error for the database application tables connector. The odd part is that i can change the user password using web console as xelsysadmin nicely. Also I can change the password when i retried the failed task.
    Any help is appreciated.
    I'm running OIM 9.1.0.2 with BP05 applied, Weblogic Server 10.3.2, Oracle Database 11.0.7. The OS is Windows 2003.
    Log from oim web console
    Resource Name: SOC_GTC
    Description:
    User: poc cassi17 [POC.CASSI17]
    Status: Rejected
    Response: OIM API Error
    Response Description: An error was encountered in the Oracle Identity Manager API layer.
    Notes:
    wnqAd8gmdAhODUFjs4WMyQ==
    Assigned to Group : SYSTEM ADMINISTRATORS
    Log from Weblogic sdout
    ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],
    java.lang.NullPointerException
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],An exception occurred while creating the GenericConenctor Model from the Connector Definition file
    ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'
    com.thortech.xl.gc.exception.ConnectorDefinitionOperationsException: An exception occurred while creating the GenericConenctor Model from the Connector Definition file
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
         ... 92 more
    Edited by: aviana on Feb 23, 2010 5:18 AM

    I changed the privileges as recommended, but it did no solved the problem. So I implemented the task retry as a workaround and it worked.
    Anyway, I increased the adapter's log level to debug. Please check the log below.
    ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],
    java.lang.NullPointerException
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],An exception occurred while creating the GenericConenctor Model from the Connector Definition file
    ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'
    com.thortech.xl.gc.exception.ConnectorDefinitionOperationsException: An exception occurred while creating the GenericConenctor Model from the Connector Definition file
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
         ... 91 more
    ***ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.GC.FRAMEWORKPROVISIONING],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: class - Value: java.lang.String***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: poRetVal.toString() - Value: GCPROV.ADAPTER_OIMAPIERROR***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: Returning:sRetVal - Value: GCPROV.ADAPTER_OIMAPIERROR***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString left.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal - Data: Setting Adapter Return Value to GCPROV.ADAPTER_OIMAPIERROR - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal left.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter - Data: Mapped to Response Code - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpSOC_GTC***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value: GCPROV.ADAPTER_OIMAPIERROR***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem left.***
    ***DEBUG,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter left.***
    ***INFO,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Adapter: adpSOC_GTC has completed for the task: SENHA Updated.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateDataSetValuePost left.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateProcessFormFieldValue left.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateProcessFormFieldValue left.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter - Data: No Response Code specified. Updating milestone status to Completed - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpSOCSETNEWSENHA***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value: C***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem left.***
    ***DEBUG,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter left.***
    ***INFO,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Adapter: adpSOCSETNEWSENHA has completed for the task: Change User Password.***
    ***INFO,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Event: Triggering Processes related to User. has completed.***
    Edited by: aviana on Feb 23, 2010 3:02 PM

  • 3my 1st gen ipod touch died during factory reset and wont turn on now. ideas how to fix?

    i just got this ipod and i tried to restore to factory settings through the ipod itself. it ended up dying in the middle of the reset. now it wont turn on at all. i have it plugged in to the computer and have had it plugged into the wall to try and charge it. still nothing. when i push the sleep button it shows an apple icon then turns back off.

    go back to the apple store and tell them you will get a free new one

  • Hard drive is smaller error on factory reset

    I just replaced the hard drive on an HP Pavilion s5610y slimline, and it appeared successful as it began installing Windows.   I then got "the hard drive is smaller than one originally installed, cannot continue.  I replaced a 640 GB grive with a 1TB.  HELP?!

    Hi,
    Assuming this is just a problem with the recovery media, another option you could consider, as opposed to using Recovery Discs, is to create your own 'retail' Windows 7 installation disc.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your PC which is listed as Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn ( Note: You may want to de-select the additional software offerings during the installation of ImgBurn ) to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  The Windows Image source is Digital River.
    Windows 7 Home Premium SP1 64 bit.
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP system restore and factory reset not completing

    Hello.
    1:  Person tried a system restore to fix a user profile problem but once booted the OS changed the  user profile to "temporary" every time, checked the original profile but only the avatar was left , all other personal info was gone.
          Working through "profiles list" in the registry and setting back to the original user profile from temp profile didn't work and went back to temporary.
          Complete erasure  reset of all user profiles includig in the registry didn't work either. Went back to temporary profile.
          It was no use to save any files while the OS was in this stat as every reboot would remove the files including in the temp profile.
     2:  Tried all basic boot/DOS HP recovery for installed windows OS with no success, all system restore backups back several months failed.
    3:  Tried a factory reset twice and while it did restore for the most part with the automated drivers installed the HP recovery  returns an error that factory reset did not or could not complete itself.  This was attempted twice.
          While one could shut down the HP error screen in windows 8 and continue the failed reset booting error was still logged and it defaults to the HP receovery which ends up looping over and over again.
           while still in windows once the HP error is closed one can goto the usual user name and password so  that was done  twice and with the simplest password.
           Problems compounded when the OS rebooted and asked for user name and password, which returned "not valid" over and over again.   One time i entered the user "administrator" with the password "admin" and it worked, it started loading but then returned invalid username or password.  Point being that  that was not the actual user name and passowrd that was chosen and confirmed.
           This part of the problem is the same as the first problem
    3A:  I wiped the main and system partitions and reformatted them  and ran then HP factory reset once again, it restored faster than the first attempt, however it dropped to the same username/password error and i can't even get into safe mode any longer.
    Again the system boot sequence registeres the restore as incomplete but i can boot select OS which is how i am able to get into windows to test the User/pass.
    4:  I beleive that there is hardware malfunction with the hard drive controler in this system as i noticed that UEFI is intermitant no matter what settings you set in the BIOS/CMOS.  When UEFI boot CD/DVD does appear in the boot selection it can't detect the cd/dvd drive or a USB drive "invalid device".
         Many of the boot options even when set in the bios will not always appear in the boot selector on every power up that includes legacy.
          While i can boot from CD/DVD with the legacy boot selection. I can't install windows 8 or 7 becasue the HD is A GPT and without UEFI i don't get advanced options in the windows OS install partition setup.  Windows 7 or 8 won't install becasue the HD partition is a GPT format even after i wipe those paritions and make new ones with basic NTFS.
          I could LLF the HD and hope that i could install windows 7 but the UEFI being intermitent would probably return the same resutls as the HP factory reset.   Similar problem with older computers when enabling AHCI in windows.
         If i LLF the HD i loose the HP recovery completely.
    Any suggestions?
    Thanks.

    Hello.   The laptop is an HP Pavilion dv6 notebook PC
    I have since LLF'd the HD and installed windows 8.1.  It's still touchy but it's working for the time being.
    A: The laptop's owner did a standard windows system restore
    B: I did two windows system restores  as well as backups.
    C:  Yes i usd the F11 at boot  recovery system to run windows system restores, cleanings, and finally the factory reset. Which is obvious as i stated above that if wiped both main windows partitions and it helped the factory restore speed so only restoring an image will replace the OS on the now empty partition.
    D:  No i didn't keep the failed restore logs as they were randomly scrambled with all the recover cycle loops (both times).
     Also i should mention that the factory restore once it failed the completion i got "insufficient sapce"  error as well  which i am guessing that it's trying to write the log file.
    If memory serves there was only 40mb left on the recovery partition.  Yes MB not GB.

  • Freezes during "starting windows" message even after factory reset.

    I've gone through diagnostic tests and they've shown it wasn't a hardware error. After a failed update to windows 10 my computer rolled back to windows 7. After the rollback when attempting to boot win 7 It froze and hung on the starting windows screen.  At first i was able to boot in safe mode and navigate the desktop and drivers, but after plenty of failed fixes i had to result to a factory reset with alienrespawn. After the factory reset the issue still persists, and i can no longer boot up in safe mode. When i do, it tries to do first time installation and says that i has to reboot in normal mode to complete first time config. My computer didn't come with a disk so i can't re-install windows 7, and factory reset dosen't seem to fix the issue. All I need is to resolve this issue so i can get back with a clean slate to upgrade to windows 10. Any ideas?

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer freezes during the "Starting Windows" message on your desktop, and I would be happy to help! Since your Alienware X51 computer is a Dell product, I recommend contacting Dell Technical Support for further assistance in this matter. Best Regards

  • In updating my iPod to 6.1.2, I received an error during the update.  Now, ipod is not rebooting.  Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture.  I don't know how to reset so that I can restore my backup

    In updating my iPod to 6.1.2, I received an error during the update.  Now, my ipod is not rebooting.  It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture.  I don't know how to reset so that I can restore from my backup.
    A similar thing happened when I updated the ios on my ipad.  But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT3728 When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I redo the factory reset.

    The Time Capsule is not providing a wireless connection.
    When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if  I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
    My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.

    Which model TC is this? The A1xxx number from the base please.
    Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
    Do the factory reset.
    Now check if TC comes up in airport utility..
    If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
    Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
    See below.
    Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

Maybe you are looking for

  • How to create a WEB client in EJB module in NB 4.1 ?

    hi I am using SUN AS and NB 4.1 I want to invoke a WS from an EJB. For some reason NB 4.1 doesn't allow me to create a WS client. Why ?

  • Best practices of BO/BW SSO SAP Authentication transports

    Hi Friends, We are going to integrate BW system with BO (SAP authentication). All the queries are built through BICS connections. And we have various reporting tools to implement SSO SAP authentication (Webi,Crystal,Dashboard.Design studio-etc) As pe

  • Character Value To be displayed in ROWS

    hello Experts, i am working on BW 3.5 i have a requirement that i need to show characterstic in report after key figure i have a report which is as material  ,net quantity, net value ,gross sales and than Characterstic Whose value is constant as C an

  • Syslog locks when switching logs without console

    Hi all, We are comming across a problem in one of our Solaris 2.6 machines. When the script newsyslog switches the logs for syslogd, this process stops writing in the messages files. This happens when newsyslog is executed not having a console open i

  • Obiee authority

    Hi ME In BIEE the ANSWERS in the four columns -> user, address, income, costs 'TN' User does not have "costs" authority now using the 'TN' User , view this report have error message Odbc 驅動程式傳回錯誤 (SQLExecDirectW). 錯誤詳細資料 錯誤碼: OPR4ONWY:U9IM8TAC:OI2DL6