Error during gen of subscren container for screens [BP sales,shipping data]

Hi,
during the intial download from ECC to CRM ,sales,shipping data is not comming with BP.
i found one solution for this problm through BUSP transaction to genarate subscrenn container for screens.
I have genarated everything .But it throws error.
The error message is
"Client 101 appl.object BUPA screen $00001:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes."
Plz anyone help me to solve this problem.
regards
geetha.g

Hi,
Even i am facing similar problem like this..
in my case,
its working in one clinet and its not able to regenerate successfullu in another client.
its showing the same above error.
I tried removing the error by running the report BDT_VCT_CORR_001 and again generating the screens... but it was of no use..
can any one sugesst me some other points
with regards,
Sumanth

Similar Messages

I'm getting an unknown communication error during my chat to initiate AIM screen sharing. Any clues as to why? Here's the comm log...

I'm getting an unknown communication error during my chat to initiate AIM screen sharing. Any clues as to why? Here's the comm log...
I don't usually have problems reaching and doing IT for my family. Is weird.
Date/Time: 2015-04-12 11:46:01 -0400
OS Version: 10.10.2 (Build 14C1514)
Report Version: 4
Messages Connection Log:
2015-04-12 11:45:33 -0400: 0x7ffb826cc310: State change from No State to Invited.
2015-04-12 11:45:45 -0400: 0x7ffb826cc310: State change from Invited to Connecting.
2015-04-12 11:45:58 -0400: 0x7ffb826cc310: State change from Connecting to Ended.
2015-04-12 11:45:58 -0400: 0x7ffb826cc310: Error -1 (An unknown error occurred.)
Video Conference Error Report:
Video Conference Support Report:
7.728039 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1973 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
18.955646 @/SourceCache/VideoConference/VideoConference-473/VCChannel/VCChannel.m:303 type=2 (00000000/0)
[VCChannel prepareConnectionWithRemoteConnectionData - remote VCConnectionData: 1]
18.964195 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1988 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
18.966613 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2180 type=2 (00000000/0)
[Initiate Conference To User: 1002 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
25.205927 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1973 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
31.603943 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1988 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
31.604365 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2180 type=2 (00000000/0)
[Initiate Conference To User: 1002 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
18.964411 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2085 type=5 (00000000/0)
[Remote Router]
[BAD TEST]
18.964419 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2087 type=5 (00000000/0)
[Remote CommNAT Result: 0x00000001
18.966640 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1679 type=5 (00000000/0)
[Router]
[FULLCONE]
18.966648 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1681 type=5 (00000000/0)
[CommNAT Result: 0x00000102
31.604133 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2085 type=5 (00000000/0)
[Remote Router]
[BAD TEST]
31.604144 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2087 type=5 (00000000/0)
[Remote CommNAT Result: 0x00000001
31.604370 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1679 type=5 (00000000/0)
[Router]
[FULLCONE]
31.604379 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1681 type=5 (00000000/0)
[CommNAT Result: 0x00000102

Hi
Ah a homehub.
Set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(
In ichats prefs click on video and change bandwidth limit to NONE.
Goto sys prefs/security/firewall and check "set access for specific........" and click the + at the bottom and add ichat to the list.
Restart ichat.
Also try connecting to me dfcom1 .mac account.
Tony

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

Error during creation of transfer orders for mateRIA

hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan

Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu

Error during creation of info record for pipline material.(Urgent)

Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
Arihanth

Hi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai

BAPI or FM for geting all sales master data, header data , item data etc

Hi experts,
In my requirement i need a BAPI (or) Function module for getting all "Sales information" data means header data , item
data, scheduled data etc .
Thank you,
Dinesh Reddy.

Hi,
check BAPI_SALESORDER_GETLIST
I hope it helps you....
Regards,
NaPPy

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

SPAM - SAPKB70016 error during phase Generation of Programs and Screens

Hi experts,
I am trying import package SAP BASIS 700 level 16, but i have still errors in phase Generation of Programs and Screens:
Program /OSP/SAPLR3_REPORT, Include /OSP/LR3_REPORTU38: Syntax error in line 000014
Type '/OSP/REP_BADI' is unknown
Program CL_HRBAS_INFTY_BL_COMPUTATION=CP, Include CL_HRBAS_INFTY_BL_COMPUTATION=CI: Syntax error in line 000005
Type 'HRBAS00INFTYBL' is unknown
Program CL_HRBAS_OBJECT_OPERATIONS====CP, Include IF_HRBAS_BUF_INTEGRATION_TO_PAIU: Syntax error in line 000007
Type 'HRBAS_PD_PA_INTEGRATION' is unknown
Program CL_HRBAS_RHOMBUFFER===========CP, Include IF_HRBAS_BUF_INTEGRATION_TO_PAIU: Syntax error in line 000007
Type 'HRBAS_PD_PA_INTEGRATION' is unknown
Program CL_PROXY_WSDL2ABAP============CP, Include CL_PROXY_WSDL2ABAP============CM03G: Syntax error in line 000004
Type 'SPRX_PROXY_NAMEPROPOSAL' is unknown
Program CL_WDR_CFG_PERSISTENCE_COMP===CP, Include CL_WDR_CFG_PERSISTENCE_COMP===CM005: Syntax error in line 000014
Transformation 'WDR_CFG_COMP_TRANSL' has no activeversion
Program CL_WSSE_PROCESSOR=============CP, Include CL_WSSE_PROCESSOR=============CM009: Syntax error in line 000131
Transformation 'SEC_SAML_ASSERTION' has no activeversion
Program SAPLPA_PACKAGE_CHECKS, Include LPA_PACKAGE_CHECKSTOP: Syntax error in line 000030
Type 'WB_PACKAGE_COMPONENT_CHECK' is unknown
System is: SAP ERP 6.0 IDES EHP3, kernel221, WIN2003, Oracle 10.2.0.4
Can you help me pls?

thank you for your help Sunny
I solved problem:
1.)
Program /OSP/SAPLR3_REPORT, Include /OSP/LR3_REPORTU38: Syntax error in
line 000014
Type '/OSP/REP_BADI' is unknown
(SE18 -> reactivated Enhancement Spot /OSP/REP_ENH_SPOT )
2.)
Program CL_HRBAS_INFTY_BL_COMPUTATION=CP, Include
CL_HRBAS_INFTY_BL_COMPUTATION=CI: Syntax error in line 000005
Type 'HRBAS00INFTYBL' is unknown
Program CL_HRBAS_OBJECT_OPERATIONS====CP, Include
IF_HRBAS_BUF_INTEGRATION_TO_PAIU: Syntax error in line 000007
Type 'HRBAS_PD_PA_INTEGRATION' is unknown
Program CL_HRBAS_RHOMBUFFER===========CP, Include
IF_HRBAS_BUF_INTEGRATION_TO_PAIU: Syntax error in line 000007
Type 'HRBAS_PD_PA_INTEGRATION' is unknown
Program CL_PROXY_WSDL2ABAP============CP, Include
CL_PROXY_WSDL2ABAP============CM03G: Syntax error in line 000004
Type 'SPRX_PROXY_NAMEPROPOSAL' is unknown
Program SAPLPA_PACKAGE_CHECKS, Include LPA_PACKAGE_CHECKSTOP: Syntax
error in line 000030
Type 'WB_PACKAGE_COMPONENT_CHECK' is unknown
(SE18 -> reactivated types)
3.)
Program CL_WDR_CFG_PERSISTENCE_COMP===CP, Include
CL_WDR_CFG_PERSISTENCE_COMP===CM005: Syntax error in line 000014
Transformation 'WDR_CFG_COMP_TRANSL' has no activeversion
CL_WDR_CFG_PERSISTENCE_COMP===CP ,
Program CL_WSSE_PROCESSOR=============CP, Include
CL_WSSE_PROCESSOR=============CM009: Syntax error in line 000131
Transformation 'SEC_SAML_ASSERTION' has no activeversion
(Tcode STRANS -> reactivated Transformations
Edited by: Miroslav Mihok on Oct 6, 2009 3:37 PM

Resolving errors during Oracle 8i Corba Deployment for Business Components Project

Below is an excerpt from the messages that were put out while creating a deployment profile for Corba for a Business Components Project. I am using JDeveloper 3.0.
resolving: oracle/jbo/server/DatabaseTransactionFactory
Error while resolving class oracle/jbo/server/DatabaseTransactionFactory
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/common/remote/PiggybackReturn
resolving: oracle/jbo/server/xml/JTPersistable
resolving: oracle/jbo/server/util/JboSQLUtil
Error while resolving class oracle/jbo/server/util/JboSQLUtil
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/xml/XMLContextCustImpl
oracle/jbo/server/xml/JTStorageOutput is already resolved
resolving: oracle/jbo/server/java/util/Iterator
resolving: oracle/jbo/server/rules/JboSQLCompareValidator
Error while resolving class oracle/jbo/server/rules/JboSQLCompareValidator
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/ValidationManager
Error while resolving class oracle/jbo/server/ValidationManager
Exception java.sql.SQLException: End of TNS data channel
initialization complete
resolving: oracle/jbo/server/TransactionListener
Error while resolving class oracle/jbo/server/TransactionListener
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/common/CheckedListResourceBundle
resolving: oracle/jbo/DeleteEvent
Error while resolving class oracle/jbo/DeleteEvent
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/common/PiggybackObjRemovedEntry
resolving: oracle/jbo/server/rules/SQLBindUtility
resolving: oracle/jbo/server/ViewRowCache
Error while resolving class oracle/jbo/server/ViewRowCache
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/ContainerObjectEvent
resolving: oracle/jbo/domain/Char$1$facClass
Error while resolving class oracle/jbo/domain/Char$1$facClass
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/xml/JTStorageInput
resolving: oracle/jbo/server/java/util/ArraySet
resolving: oracle/jbo/common/JboInitialContext$HomeNameParser
oracle/jbo/server/java/util/ListIterator is already resolved
resolving: oracle/jbo/server/xml/VersionProcessException
resolving: oracle/jbo/ScrollEvent
Are these known errors, are they likely to cause problems? Was the deployment "successful"? The process did continue after summarizing the number of errors during the resolution process and eventually terminated.

Hi Peter,
The process of resolving the transitive closure of a large set of java classes (like the BC4J framework) can be quite memory intensive in JServer for the resolution phase.
You can alleviate this problem by turning the verifier (-noverify option) off.
That will speed up the resolution process a bit.
Also in your init.ora file check the java pool size and if it is less than 50 MB, do increase it to 50 MB or larger (The higher the better.)
Hope this helps,
-Kishore
null

Error during currency conversion and consistency check in a sales order

Hi Experts,
I am facing the below error in the sales order. The sales order is having so many items. The below error is coming for few items only. I have checked the currency exchange rates also. All are maintained properly.
Please advice me how to fix this error or which class,methods are responsible for checking the above details while saving the order.
Thanks,
Sri

Hi Christophe,
FYI
Error during currency conversion frm &1 to &2 (date &3, ref. curr. &4)
Message Class - CRM_CUMULATED_I
Message No     - 013
Error during currency conversion for &1 and &2
Message Class - CRM_CUMULATED_I
Message No     - 008
Consistency check: Logical key does not match
Message Class - CRM_CUMULATED_I
Message No     - 011
Thanks,
Sri

User Exit for XD02 in Sales area data in Sales tab

Hi Sap Gurus,
I have a problem . I need help .
The requirement is
In XD01 transaction , In Sales area data, In Sales tab i need to add a Check box which i already have added.This check box refers to KNVV table-Zflag
In VA01 transaction , In menu goto -> header -> Sales , In Additional data B .
I have another Check box. This check box refers to Vbaktable-Zflag .
<b>I need the code and exact locations where to put this to get my issue resolved which is given below in Functional Description</b>.
Functional Description where you can understand better.
   Our custom logic will be initiated once the Sold-to Party (VBAK-KUNNR) is entered for any order type. When the sold-to party is entered the user exit program will check table KNVV for the custom field ZFLAG that corresponds to the Print Prices on Delivery Note flag (hereafter referred to as the Pricing Flag) and populate the same setting of the flag into the ZFLAG that will be on the Additional data B tab on a sales order at the header. The user can manually change VBAK-ZFLAG Pricing Flag setting to something different than what is populated for the customer master level.
If the user happens to change the sold-to party for any reason then the user exit program should take the following approach when populating the ZFLAG Pricing Flag in a sales order:
-     Recheck the ZFLAG Pricing Flag setting in the customer master for the sold-to party that the user has newly selected.
The user will still have the option to manually ZFLAG Pricing Flag on a sales order after the user exit program defaults it.

Transaction Code - XD02                     Change Customer (Centrally)
Exit Name           Description
SAPMF02D            User exits: Customer master data
No of Exits:          1
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Datasource for CRM BP Sales Area Data

Hello Experts,
I am trying to extract CRM Business Partner Master data Segments into BW system.
I want to know the datasource that can provide me information from 'Sales Area' Button in /nBP transaction.
Fields i am looking for Sales Organization, Sales Office, Sales Group, District.
Thank you
Arun

Hi,
This is just for my understanding,
BP Master Data
BP - 101 has
Sales Org - 201
with 0CRM_BP_SAL staging
ORGUNIG Master Data
Sales Org - 201 has
Sales Group - 301
Sales Office - 401
District - 501
Sales Group - 302
Sales Office - 402
District - 502
and more with 0ORGUNIT
How will i be able to derive navigational attribute for the combination
BP - 101
Level 1 NAV for BP 101
Sales Org - 201
Level 2 NAV for Sales Org 201
Sales Group - 302
Sales Office - 402
District - 502
Please light me up some ideas.
From my understanding there is some BP-Sales Org detail link table.
Thank you
Arun Prasad
Message was edited by: Arun Prasad

Setups for populating the Schedule Ship Date to be populated

What setups are required for the Schedule Ship Date to be populated.
Actually we have a requirement that the manufacuring org will ship the products on a specific week day while the customer receives the product on a specific week day.
We want the schedule ship date to be calculated automatically based on the shipping calendar of the plant and receiving calendar of the customer.
What setups I have to do to acheive this functionality and what are the parameters for Data collection program?

Hi,
To calculate the schedule arrival dates, the working days are considered from the manufacturing calendar set for the shipping organization. This has been fixed for an ER. Refer ER 2371136 for details.
Regards,
Swapna.

Fm or BAPI for Change Customer: Sales area data

Hello All,
I need to change tax classification in Sales area data of Changing Customer ( transaction XD02 ).
Function BAPI_CUSTOMERCRM_CHANGE looks like is ok for this, but I've try it and is not working, maybe i'm forgeting something or is not proper for this.
Do you know a function for this or an sample with BAPI_CUSTOMERCRM_CHANGE ?
Note: Function must not be for online store and Internet Sales.
Any help will be appreciated and rewarded.
Thank you a lot!
Bogdan

Hi again,
Not the BAPI COMMIT was the problem,
But I found FM SD_CUSTOMER_MAINTAIN_ALL, which is working realy fine.
All the bests!

SAP MM Rounding Profile not allowed for plant in sales org data 1-Quantity stipulation

Hi
I have created rounding profile in OWD1 for a particular plant and it is showing IN material master MRP DATA1 area. But when i am trying to assign in sales :sales org1 data under quantity stipulation area there is no profile . Is there any specific plant assignment for sales area data?
Kindly guide me.
Ganesh

Hi,
The material master sales data 1 is not plant specific generally. You may create a rounding profile in OWD1 without plant and then the same will be visible in the F4 list in sales data 1. If the rounding profile is plant specific, you have to maintain the delivering plant in material master - sales data 1.
Regards,
AKPT

Error during gen of subscren container for screens [BP sales,shipping data]

Similar Messages

Maybe you are looking for