Error during goods issue-Posting period not open

Hi ,
I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
Thanks,
Hari.

Hi,
Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Similar Messages

  • Error during Goods Issue Posting to Cost Center

    Hi all,
    I have WM and HUM active.
    I'm trying to post a GI to Cost Center using the transaction MIGO and Movement type 201. I get this error during the transaction:
    Data for creating a delivery is incomplete (Vendor)
    Message no. M7279
    Diagnosis
    The system found that the data required to create a delivery via Shipping is not complete.
    System Response
    The system cannot create a delivery.
    Procedure
    Check that the data for Vendor is maintained in your system:
    loading group
    debtor number
    sales organization
    distribution channel
    division
    shipping condition
    shipping point
    It's strange that the error is specific to vendor because this is an inhouse transfer to a cost center. However, I've maintain the listed items in spro.
    There's still something wrong and I'm at a loss. What am I doing wrong? How can I correct it?
    Any suggestions would be appreciated. Thank you.

    Hello Uzoamaka
    Not sure if this helps you but check out these OSS notes,  first one especially,  and others referred within them.
    Let me know if they help you or otherwise.
    547209 - Backflush of HU storage location generates delivery
    723250 - M7279 when creating a delivery from MB1C

  • FB01 Posting period not open

    Hi,
       I am an abapper, i am trying to check a BDC for the transaction FB01, in the first screen i get the error message "Posting period <year> not open" Can any body tell me how to find out the correct data to be given in the respective fields.
    Regards
    Narendiran

    hi.
    I am working on ECC 5.0 sand box-IDES
    IN OMSY, my current period is 09 and ABp indicator is flagged.
    In OBY6 i have the variant as 0001.
    In OB52, for variant 0001, for one of the account assignment, i have
    " From Period 1 Year 1996 To period  12 1999 From Period 2  13 Year 1995 to period 16 1995"
    How do i make the FI posting current the FY 07 untill 9999?
    Because when i try to change the Year as follows
    " From Period 1 year 1996 to Period 12 9999 From Period 2  13 Year 1995 to period 16 9999". i get the following " Error" Message.
    " Posting periods should not be opened"
    Where can i change the setting from " Error" to " Warning" or how do i make the changes in FI to make it current to year 2007.
    Due to this , i am unable to do Goods receipt since when i do MIGO, i get the error message " Posting periods not open"
    Much appreciated for your response.

  • Goods issue form is not opening

    Hello Experts,
    With one of my user, Good issue form is not opening. As he has got full Authorizations for Goods Issue, when we click the Goods issue option, something happens but then FORM  does not  appear.
    Help Required
    Thanks

    Hi Shazad,
    After login with the affected user
    1. Open any document like sales order
    2. Now select the Goods Issue option
    3. Go to Window -> Cascade
    Regards,
    Vijay kumar
    SAP Business One Forums Team

  • Error during Goods Issue "Update was terminated"

    Hi,
    While doing Goods Issue (Mov Type 201), the system save the Document, but when we display the Document, the System gives the following message:
    Update was terminated
    System ID....   DEV
    Client.......   400
    User.....   MMUSER1
    Transaction..   MIGO
    Update key...   B4E937DFC88FF1F3998B00215E73E462
    Generated....   25.03.2010, 14:09:53
    Completed....   25.03.2010, 14:09:53
    Error Info...   F1 109: Line item 001
    Please note that using MMPI, we have opened the back period. There is not problem in posting the Goods Receipt/ Goods Transfer/ Invoice Posting.
    Please help.
    Regards,

    an update termination happens only in an unexpected case, no authority is an expected case and SAP would issue a status message long before posting.
    In your case SAP determined a document number (item number) that is already in the data base. hence it can technically not store the document.
    such things happen if one transports a number range from a development system, but in dev systems the current number is much lower than in a production system, so the next number that is taken from the number range  is already used and stored in a table.
    or if one resets number ranges after an archiving run or for any other intention.

  • ASKB - POsting Period not open problem

    Hi All,
    I saw many threads on this problem but not got suiatable solution thats why i am raising this thread again.
    Due to some problem my client not Run ASKB for October period, now when he is trying to run ASKB for November month he is getting error that 'Posting period is not open'.
    Now we cannot open 'Posting period' 'October' because of some organizational issues.
    Kindly suggest me how i run ASKB for 'Current month.
    Regards
    Sandeep

    Hi Sandeep,
    To my regret, is the answer here is definitely NO.                                                                     
    A reconciliation of the system would be not possible (For example, in foreign currency and a parallel currency).
    This source of error was stopped by switching from batch input sessions  to the Direct booking with RAPERB2000. (With batch input sessions  it was possible to manipulate).
    Furthermore, the values in the periodically posting areas have to be posted into the correct period.
    If the reconciliation is not relevant, you can check via testrun which values have to be posted and post them via FB01. In this case you have to manipulate also the table TABAS and T093D.  But take into acount that this is on your own risk and will not be supported by SAP.
    My personal opinion: Open the periods and run the RAPERB2000 regular.
    Regards Bernhard
    Edited by: Bernhard Kirchner on Nov 29, 2010 12:54 AM

  • Posting period not open for a/c type S and G/L :400020

    Hi Gurus,
    While posting GR through MB1C, I am getting an error message "Period 009/2009 is Not open for Account type S and G/L:400020".
    I also went to table T001B, but could not do much.
    Please help.
    Thanks,
    Kumar

    in OB52
    + Valid for all account types
    your all account will be opened.  otherwise check OMSY for your company code
    NHID     NCC Housing and Infrastru     2009     6     2009     5     2008     12
    change your settings to the above till it is working
    Thanks
    Rajakumar.K

  • Posting periods not open

    Hi  folks ,
    I have porblem in bringing in  my stock using mb1c
    it throughs an error posting periods 005/2008 is not open
    please suggest me how to get rid of this error
    Thanks
    ravi

    Hi
    i tryed all those , but still having problems,
    please let me know how to open closed period , is it possible?
    in omsy it shows 05 2008 for my company code
    Thanks
    ravi

  • Posting period not open

    Today is April/1/2010.
    When I try to do MIGO then get message that "posting period of 10/2010 not open".
    What I need to do to avoid error?

    HI,,
    Run tcode MMPV from company code-put here company code for which you want to open posting period and than Date - 01.04.2010. and select  Check and close period > than execute ..... and check to Post GR in current month.
    it is suggested to post all Pending Documents.

  • Fund Managment: Posting period not opened for value type 66

    Hi,
    I have already opened all the posting periods FM  thru' TC: FMIR  from period  0 to 16  for all account assignments.
    While posting through thru' a customised program (i.e customised program is using  FB01) I am getting error 'Period 002/fiscal year 2010  not open for FM posting in value type 66', please let me know why this error inspite of opening all the periods and for all account assignment.
    Thanks,
    Suresh

    hi suresh,
    Check this link
    FMIR - For fiscal yr based encumbrance, the whole fiscal will be open
    Hope it will resolve your question.
    Thanks and regards
    Praveen.J

  • Error during Goods Issue using movement type U61

    Dear All,
    There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
    I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
    Any guidance or help is welcome
    Regards
    Balaji.J

    Hi,
    The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
    Regards
    Balaji.J

  • Error during goods issue

    Hi Gurus,
    While doing goods issue of operatings supplies material type we are getting an as follows
    Create account 403000 for 18.04.2008 as a cost element in controlling area
    Although G/L account and cost element are already created
    Message no is KI280
    Thanks in Advance
    Regards
    Ramkumar Wariyar

    Check the validity of the cost element and gl account. You may need to extend the validity of the cost element.
    Regards
    Ram

  • Error during Goods receipt posting

    Hi all
    I'm getting  the following error message when trying to do a goods receipt (101 mvmt)...
    Account determination for entry COA BSX ____ ___ 7900 not possible
    Diagnosis
    The system did not find an account for this transaction. This means that the account determination for key COA BSX ____ ___ 7900 is not maintained in MM Customizing (Valuation).
    The key is made up of:
    Chart of account
    Transaction key (= Posting transaction)
    Valuation grouping code
    Account grouping code
    Valuation class
    System Response
    The system cannot update a G/L account for this transaction. You cannot post the transaction.
    But I've created a GL account and assigned to the val class.

    Hi ,
    U try to post material from MB1C and to solve the above error u have to do the following changes:
    OMS2-> choose your material from position button-> Select it> Click on Quantity/Value Updation under dialog structure> Choose your Value Area and Material Type> Uncheck Value Updation---> Save it and now try to post material .
    Did u tried this this will help u
    Still if u find error reply me
    Reward me points if helpful.
    Regards,
    Venuprasad

  • Period Not open

    Could Someone help me. I am trying to post stock *MB1C and it says posting period not open. I checked *MMPV and *OMSY they both show current period 05.2007. is there any other setting that I have forgooten. MMRV allows back posting. I tried different dates and no luck.  Any help is greatly appreciated

    Dear Simran,
    Kindly note that the posting period in FI thro' OB52 is mainly for controlling any entries posted to the general ledger/AR/AP books of accounts i.e accounting documents.
    Whereas the posting period control in MMPV/MMRV is only for controlling the postings to the materials document i.e Inventory management. No link with respect to posting to FI documents. Only material postings are controlled thro MMPV/MMRV. It is very difficult to list all the transactions. It is basically wherever there is an account document generation from other components like SD,MM,PP then the respect period should be open in FI. Similarly wherever there is an  movement of materials then the system checks whether the period in MM is open for the movement.
    Read the on-line documentation with respect to posting periods in FI under financial accounting as well as thro' SPRO under financial accounting global setting-documents-posting periods IMG documentation.
    Similarly under material management for open & close periods in MM.
    I hope this information can be help to you.
    Please reward points if it useful.
    Regards
    Ravinagh Boni

  • FMDERIVE  FM assignments during migo goods issue posting

    Hello experts,
    We are using  funds management (ECC 5.0) . During goods issue to reservation the fund, fund centre, commitment item which are entered in the reservation document are displayed during the fmderive trace. Even while performing check (under MIGO) the display and commitment item derivation is correct. But when posting , the first screen of trace shows all fields correctly.
    On clicking X, all the data fund, fund centre commitment are initialised to BLANK. And system gives error "No fund cente derived , entered FI313" even though the migo screen shows all the data intact. Somehow MIGo when posting initilaises all the fields
    Please help
    HKrishnan
    Indian Rayon

    Hi all,
    thanks for the helpful suggestions. I have found that while doing the actual posting for
    goods issue , fmderive was trying to derive commitment item, and since nor rule was applicable it was giving the error. it was due to an erroneous rule wherein the inventory posting flag waas missing in the relevant GL, and corresponding credit/debit entry was also missing.
    Now corrected. I have still not understood, why the derivation blanks out all the fields which have been already entered by user in the original document.
    In other words of the field commitment item is already fileld it should skip the entire FMDERIVE process.
    Anyway thanks all

Maybe you are looking for

  • HT5538 can itunes have more than one apple id attached to it

    I am trying to not have iclouds and itunes sync the same content on different Ipads, yet all ipad connected to the same itunes.  Is that possible?

  • Unable to use or the back arrow & has stop working

    unable to use the back arrow , will not work on any site, just stop working thanks

  • Will a new router increase my broadband speed in this configuration

    How much (if at all) can I increase my broadband speed by getting a faster router. Here's my config: DSL line --> DSL modem --> Lynksys BEFSR41 Router --> Ethernet cat-5 wiring in house --> TimeCapsule WiFi The computers using this network are an Int

  • Filename path with mac?? Help

    I am trying to type in a filename path on a webform but have no clue how it works on a mac. The file is in my pictures directory... On my PC, I know it would be c:/Photos/wedding or something like that to get to the directory. How does this work on a

  • ECC 5.0 Password Security Risk?

    Experts, I've tested with a few different colleagues who are also running ECC 5.0 and am consistently finding issues with the system password validation. As an example, assume login/min_password_lng parameter (minimum password length) on a password i