Error during Goods Issue "Update was terminated"
Hi,
While doing Goods Issue (Mov Type 201), the system save the Document, but when we display the Document, the System gives the following message:
Update was terminated
System ID.... DEV
Client....... 400
User..... MMUSER1
Transaction.. MIGO
Update key... B4E937DFC88FF1F3998B00215E73E462
Generated.... 25.03.2010, 14:09:53
Completed.... 25.03.2010, 14:09:53
Error Info... F1 109: Line item 001
Please note that using MMPI, we have opened the back period. There is not problem in posting the Goods Receipt/ Goods Transfer/ Invoice Posting.
Please help.
Regards,
an update termination happens only in an unexpected case, no authority is an expected case and SAP would issue a status message long before posting.
In your case SAP determined a document number (item number) that is already in the data base. hence it can technically not store the document.
such things happen if one transports a number range from a development system, but in dev systems the current number is much lower than in a production system, so the next number that is taken from the number range is already used and stored in a table.
or if one resets number ranges after an archiving run or for any other intention.
Similar Messages
-
Error during goods issue-Posting period not open
Hi ,
I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
Thanks,
Hari.Hi,
Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore -
Error Msg: Express Document 'Update was Terminated' in VF02 t-code
Hi all,
When I click on save in VF02 transaction I am getting message that ' Express Document 'Update was Terminated' received from author 'XYZ'.
After saving when I am seeing in header -output the output type not appearing.
Please Help me Its an urgent requirement.
Regards,
vinodHi Vinod,
there is two reasons
1) Number range is not specied limit define billing document number range.
path- img sd- billing -define number range and see diffenettly i hope your problam willbe solved.
2) t.code NACE whether you have maintained the condition record or not check other wise please maintain it.
i hope you have understood
if your problam is solved don't forget to reward.
thanks& regards
surya -
Error during Goods Issue using movement type U61
Dear All,
There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
Any guidance or help is welcome
Regards
Balaji.JHi,
The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
Regards
Balaji.J -
Hi Gurus,
While doing goods issue of operatings supplies material type we are getting an as follows
Create account 403000 for 18.04.2008 as a cost element in controlling area
Although G/L account and cost element are already created
Message no is KI280
Thanks in Advance
Regards
Ramkumar WariyarCheck the validity of the cost element and gl account. You may need to extend the validity of the cost element.
Regards
Ram -
Error during Goods Issue Posting to Cost Center
Hi all,
I have WM and HUM active.
I'm trying to post a GI to Cost Center using the transaction MIGO and Movement type 201. I get this error during the transaction:
Data for creating a delivery is incomplete (Vendor)
Message no. M7279
Diagnosis
The system found that the data required to create a delivery via Shipping is not complete.
System Response
The system cannot create a delivery.
Procedure
Check that the data for Vendor is maintained in your system:
loading group
debtor number
sales organization
distribution channel
division
shipping condition
shipping point
It's strange that the error is specific to vendor because this is an inhouse transfer to a cost center. However, I've maintain the listed items in spro.
There's still something wrong and I'm at a loss. What am I doing wrong? How can I correct it?
Any suggestions would be appreciated. Thank you.Hello Uzoamaka
Not sure if this helps you but check out these OSS notes, first one especially, and others referred within them.
Let me know if they help you or otherwise.
547209 - Backflush of HU storage location generates delivery
723250 - M7279 when creating a delivery from MB1C -
Earmarked funds - Express document "Update was terminated" error
Hi,
When i create a contract(RECN), a earmarked funds document getting created and it updates the table KBLK with single primary key BELNR.
I see in the Tcode OK60, the number range assinged is '05' - 0200000000 to 0299999999.
KBLK table has entries created from 0200000000 to 0299994311 which were created earlier.
From this financial year, when i am creating a contract, the new BELNR is started again from 0200000000 series, hence it throws an error message "Express document "Update was terminated" since entries are already exist in the KBLK table.
Finally i understand we have to change number range assignment.
Where can i do this? Please help if my understanding is wrong, how can i rectify this issue.
Thanks,
Bharath.Hi,
U can change the number range for the contract for this fical year and make it start from 0299994312 to 0299999999.
But it seems u have already used most of the numbers, so go for a new number range for both the documents.
Hope this helps
Deepak -
Error:express document "Update was terminated" received from author
Hi All,
I m creating shipment frm the transaction VL01.
While creating the shimpment i am assigning one Z output type and clicking on the planning phase on the shipment.
After that i am saving my shipment.
At this point of time my shimpmnet is created but after this(after saving the shimpment) if i am trying to do anything it is giving me the below error.
Express document "Update was terminated" received from author "Sachin Yadav".
Kindly help why i m gettng this error. How to remove this error.
Regards
SachinSAP is telling you that the transaction failed and a rollback has been executed, due to some catastrophic error in the system. These often arise from errors in exit coding....check ST22 to see if you can find anything...there may be a clue there....otherwise start looking at the changes you just made for the source of the error.
This error occurs, most likely, because during the actual save to database operation, or because of something in follow-on processing launched during the save step (like a new background task for form output or something like that) an fatal error is occurring and SAP is detecting that and rolling back the body of work that was just committed to the database. -
Express document update was terminated in mm02
Dear experts:
when i use MM02 to change the material master,after saving,i get the error message'Express document update was terminated'.
The ID has working period of time and the authority is enough to do this,pls give some advice.
Thank you very much!Hi Stephen,
This error message comes when ur transaction doesn't get the proper system resources or when the load on the server is too much. Becuase of which tables dont get update and u get the error .
basically it is performance issue of the system. U can try after some time if proble persists u can contact ur BASIS team.
Regards,
AM -
Update was terminated '' received from author
Hi Experts
Any clue why this error comes while performing goods movement
update was terminated '' received from author
I've was told in the forum to check in SM13
Was able to see the following error message in SM13
00671: ABAP:/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Thanksabhi,
as max and siva have told, check in ST22...
there, check the source code extract on which line it failed. you can also check what values were there at that particular time by checking the variable stored in that dump as well...
if you are still note sure, click on that source code(shown in that dump->source code extract) .. and keep a break point there and then see what really happened there by re-executing your transaction. -
Getting "Express Document Update was terminated" while creating BP..
HI All
I am creating Business Partner using HR Pernr using following BAPI's.
1. BUPA_CREATE_FROM_DATA - To create BP.
2. BUPA_ADDRESS_ADD - To create address..
3. BUPA_ROLE_ADD_2 - To create role.
4. BUPR_RELATIONSHIP_CREATE - To create relationship.
5. BUPA_BANKDETAIL_ADD - To create acounts.
6. BUPA_STATUS_ADD - To create status.
BP is creating fine...along with I am getting the Error like "Express Document update was terminated received from author ......" . Error descriptin looks like below.
Error Info... CD 328: DUPREC:POS&BUPA_ADR&DP00243572.
I have verified in SM13 T code...It is showing in BUPA_ADR_WRITE_DOCUMENT.
Please suggest me how we can resolve this issue...
Thanks in advance..
RamaHi Rama Krishna,
This can also happen when your number ranges are incorrectly defined.
Try checking number range assignment for BP and check in table if number already exist.
We faced similar problem when migrated data from prod server and someone change the number ranges for PO.
Regards,
Mohaiyuddin -
Express document "Update was terminated" received from author " "in VA21
Dear SAP Experts,
i just set up Output determination for quotation type. and created VA21, while coming out i am getting error
as Express document "Update was terminated" received from author "
below is the dump i am getting. Could you please help me to solve this?.
Update was terminated
Created m8050032 on 06.01.2010 13:04:43
Update was terminated
System ID.... E6I
Client....... 800
User..... M8050032
Transaction.. VA21
Update key... DD95FADEFC90F19591EF001D0915C7EC
Generated.... 06.01.2010, 13:04:42
Completed.... 06.01.2010, 13:04:43
Error Info... 00 671: ABAP/4 processor: SYNTAX_ERRORHi,
Goto T.code ST22 - ABAP runtime error
click today button,
check for the error and double click to get the detailed long text
see "How to correct the error"
take a help of ABAPer
Regards
senya -
Express document "Update was terminated" on saving vendor payment F-48
TCODE F-48.
When we are going to pay full payment to party it works fine
Problem:
When we do partiall payment for example
100 kg material Price $100
first time: we purchase 50kg of $50 and create GRN
After this when we decide to pay the remaing payment of the material then system give the error .
Express document "Update was terminated" . This error appears when we select all the Taxes line simultaneously.
System not show this error when select one tax line and post the document but this is not acceptable because multiple invoice will create for lone documnet.
Looking forward to your replies.Hi Atif,
Thanks for your quick reply. following are the error details
FUNCTION MODULE: POST_DOCUMENT
STATUS : UPDATE WAS TERMINATED
REPORT : LF005S01
ROW : 293
ERROR DETAILS :CLASS F1 NUMBER:109
F1 109: Line item 005
WHEN I CLICK ABAP EDITOR IT TAKES ME LAST LINE OF THE FOLLWONG CODE
FORM BSEG_INSERT.
INSERT BSEG.
IF SY-SUBRC NE 0.
MESSAGE A109 WITH BSEG-BUZEI BSEG-BUKRS BSEG-BELNR BSEG-GJAHR.
ENDIF.
ENDFORM. <----
CURSOR BLINKING ON THIS LINE -
Express document "Update was terminated" recev from auth While BAPI change
Hi.
Iam trring to change sales order which is exist in the system provided to insert a new item
for a existing sales oder and pass values to header and update flag as 'U'
and item details and flags for corresponding items.once it throws an error as
"Express document "Update was terminated" recev from auth "
while iam executing bapi_salesorder_change once control goes to the
Bapi_transaction_commit it throws Error .
may i know what is problem and how pass values to BAPI_SALESORDER_CHANGE
Why that kind of errors occur oftenly.
Thanks & Regards
sivakumar kasaThanks Mr.JP
Error analysis:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
when i comment partner details it works but
Iam not getting quantity and partner details so how to pass Partner Details and item quantity
to updated existing line item number.
Thanks & Regards
sivakumar kasa -
How to resolve the problem of "Update was terminated" when posting
hello,
please give me a favor. I met a big problem when running FB01, the system give me the error message: Express document "Update was terminated" received from author. I test all clients, all of them have the same problem, how to resolve.
I use SAP ECC6.0 IDES, the error messages recorded by SM16 are:
DDIC_TYPE_INCONSISTENCY
SAPLGIVA
FGVALATT
16
//bas/700_REL/src/krn/runt/abucutil.c#2
ab_RxDdicTypeError
1053
20070528145604
8176
81920
0
37628064
3299600
879552
DG
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=5564)
When : 5/28/2007 14:56:4.843
Threads : 2
Computer Name : EXXEPT01
User Name : SAPServiceER1
Number of Processors: 2
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id d10
eax=00000201 ebx=00000484 ecx=00000210 edx=04bcf0de esi=00000484 edi=00000000
eip=7c82ed54 esp=053cd608 ebp=053cd678 iopl=0 nv up ei pl zr na po nc
eip=7c82ed54 esp=07e5fec0 ebp=07e5ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:07e5fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:29d6e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
07e5ff04 010f51e5 000006e0 00000000 00000000 0613e580 ntdll!KiFastSystemCallRet
07e5ff84 7c349565 00000000 00000000 00000000 0613e618 disp+work!SigIMsgFunc [signt.c (594)]
07e5ffb8 77e66063 0613e618 00000000 00000000 0613e618 MSVCR71!endthreadex
07e5ffec 00000000 7c3494f6 0613e618 00000000 00000000 kernel32!GetModuleFileNameA
-cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053cd608=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:272dbc1b=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053cd678 77e6ba12 00000484 ffffffff 00000000 053cd6ac ntdll!KiFastSystemCallRet
053cd68c 0100a516 00000484 ffffffff 00000002 00000001 kernel32!WaitForSingleObject
053cd6ac 0055ab69 0055aba2 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (449)]
053cd6b0 0055aba2 7c38b5c8 7c38b5c8 7c38b5c8 01d28c78 disp+work!NTStack [dptstack.c (1365)]
053cd6cc 0055abd6 7c38b5c8 00000000 00852a87 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
053cd6d8 00852a87 7c38b5c8 00000000 005f0059 00310030 disp+work!CTrcStack [dptstack.c (182)]
053cd6fc 00855dd9 00000020 a02899f8 a02b037c 00000000 disp+work!rabax_CStackSave [abrabax.c (6842)]
053cd7d4 007fa810 0141ec20 0141ebf0 0000041d 203ec5e0 disp+work!ab_rabax [abrabax.c (1213)]
053cd7ec 00a1d65f a0284050 0000007b 053cd868 00000000 disp+work!ab_RxDdicTypeError [abucutil.c (1053)]
053cd818 00a1d747 a02a4fe0 a02a4fe0 a02a4fe0 00000000 disp+work!FirstLevelChildCnt [scsypar.c (3423)]
053cd894 00a1dca1 053cd8cc a02a4fe0 053d0d20 053d0ce4 disp+work!UcTypeToTree [scsypar.c (3578)]
053d0d28 00a1dd69 053d0d44 a02a4fe0 00000000 a02a4fe0 disp+work!UcTypeToFragView [scsypar.c (3845)]
053d0d70 00a170f0 a02a4fe0 104e3ac8 00000000 00a0cfa7 disp+work!sc_tparUcFragView [scsypar.c (3897)]
053d0d80 00a0cfa7 a02a4fe0 00000000 0295d6d4 a01bc106 disp+work!sc_loadflds [scsytyp.c (813)]
053d0d9c 00a1aafa a01bc106 0295d6d4 00000000 0295d6d4 disp+work!sc_ddictab [scsyddic.c (166)]
053d0ef8 00a1b4f8 00000004 053d0f20 a01bc106 0295d6d4 disp+work!simple_type_find_1 [scsytyp.c (2999)]
053d0f24 00a1b762 a01bc106 00000004 0295d6d4 0000000b disp+work!sc_complex_type_find [scsytyp.c (2621)]
053d0f4c 00a13e2b a01bc106 0000000b 00000000 0295d6d4 disp+work!sc_ctypid [scsytyp.c (2447)]
053d0f6c 00b8c83a 00000001 00000005 00000002 053d7a1c disp+work!sc_typid [scsymb.c (1733)]
053d79d4 009d2f1d 000000d1 0294d7d4 02939df8 02939d94 disp+work!rs_expan_abap [rsabap32.c (1241)]
053d79e8 00a08072 000000d1 053d7b04 a01bc0f4 00000000 disp+work!sc_expan [rsyn6.c (2228)]
053d7adc 00a076df 00000000 053d7b04 00000000 00000005 disp+work!parse [rsyn4.c (1398)]
053d7b1c 00a5c027 00000076 00000000 00000001 00000001 disp+work!sc_check [rsyn4.c (402)]
053d816c 00b2b436 00000000 06474310 06495096 00000000 disp+work!sc_inclu [rsyn31.c (1675)]
053debd4 009d2f1d 00000076 0294d7d4 02939124 02939114 disp+work!rs_expan_abap [rsabap31.c
053debe8 00a08072 00000076 053ded04 a01ae0f0 00000000 disp+work!sc_expan [rsyn6.c (2228)]
053decdc 00a076df 00000000 053ded04 00000000 00000005 disp+work!parse [rsyn4.c (1398)]
053ded1c 00a5c027 00000076 00000000 00000001 00000001 disp+work!sc_check [rsyn4.c (402)]
053df36c 00b2b436 00000000 00000000 00000000 00000000 disp+work!sc_inclu [rsyn31.c (1675)]
053e5dd4 009d2f1d 00000076 0294d7d4 02939124 02939114 disp+work!rs_expan_abap [rsabap31.c
053e5de8 00a08072 00000076 053e5f04 a01a00ec 00000000 disp+work!sc_expan [rsyn6.c (2228)]
053e5edc 00a076df 00000000 053e5f04 00000000 00000000 disp+work!parse [rsyn4.c (1398)]
053e5f1c 00a08b07 0295ba90 053e9c88 053e64c8 009ce139 disp+work!sc_check [rsyn4.c (402)]
053e5f2c 009ce139 00000000 00000000 00000000 053e64a0 disp+work!sc_checkStart [rsyn4.c (24
053e64c8 007e0f7f 053e9c88 00000001 00000000 00000000 disp+work!cg_generate [cgmain2.c (65
053e6510 0057a552 053e9c88 00000000 00000000 053ec954 disp+work!ab_gabap [abgen.c (1592)]
053e9cf8 007e1558 00000041 a0828954 00000000 00000000 disp+work!dy_gen_abap [dynpabsv.c (2
053ec914 00656064 a0828954 00000000 00000000 00000000 disp+work!ab_genprog [abgen.c (1345)
053ec964 006566ab a0828954 00000000 00000001 053ec9a4 disp+work!newload [abload1.c (388)]
053ec990 0065673b a0828954 00000001 053ec9a4 00000000 disp+work!ab_LoadProgOrTrfo [abload1
053ec9a8 0072796a a0828954 00000001 00000000 00000000 disp+work!ab_LoadProg [abload1.c (77
053ecadc 00708d14 00000000 a016ff64 0000001e 00003623 disp+work!ab_link [ablink.c (381)]
053ecb04 0070c9c0 a016ff64 0000001e 00000000 a0828954 disp+work!perform_load [abperf.c (68
053ed0bc 0067af78 00000003 a080fd88 00000000 053ed124 disp+work!ab_jxper [abperf.c (478)]
a016ff64 80000000 005f004c 80000000 00000044 80000000 disp+work!ab_extri [abextri.c (552)]
005f0025 458bec8b b1908a08 56000000 8a0c758b 0000b18e <nosymbols>
005f0025 458bec8b b1908a08 56000000 8a0c758b 0000b18e <nosymbols>
55c3c95b 00000000 00000000 00000000 00000000 00000000 <nosymbols>
State Dump for Thread Id 14ec
eax=00000001 ebx=00000103 ecx=fffffffe edx=05580000 esi=00000000 edi=00000000
eip=7c82ed54 esp=07e5fec0 ebp=07e5ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:07e5fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:29d6e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
07e5ff04 010f51e5 000006e0 00000000 00000000 0613e580 ntdll!KiFastSystemCallRet
07e5ff84 7c349565 00000000 00000000 00000000 0613e618 disp+work!SigIMsgFunc [signt.c (594)]
07e5ffb8 77e66063 0613e618 00000000 00000000 0613e618 MSVCR71!endthreadex
07e5ffec 00000000 7c3494f6 0613e618 00000000 00000000 kernel32!GetModuleFileNameA
-FAGLFLEXT
123
700 Windows NT 2x Intel 80686 EXXEPT01 ORACLE ER1 EXXEPT01
700
NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
OCI_10103_SHARE
GregoryHello Greg,
Thank you for this question. What you are reporting looks to me like requires deeper analysis in the system. The channel for such questions is the Service Marketplace <i>http://service.sap.com/.</i> Please post it there.
Thank you!
Kind regards, Kyoko
Maybe you are looking for
-
How can you get back into your phone when you've forgotten the passcode?
I recently changed my passcode and have been enterig what i thought was my new one but it has not been working.
-
Can we create a XDP file on the fly
Hi All, I am new to Live Cycle. I want to know if we can create an XDP file on the fly and immediately using this XDP file can form server create a PDF? Need this info urgently.. Thanks in advance. Regards Vinay
-
Hi everyone, I would like to know, where do you have the document control program? I do this question because I use Primavera to plan and control the projects but I can´t use the documents (drawings) in Primavera Project Manager. I know that Primaver
-
Firefox keeps trying to install main.html
I get popups and Firefox keeps trying to install software "main.html". What is it?
-
Raw file plug-in for Canon 70D
I bought the Canon 70D yesterday and have Adobe CS5 with in-design. Will I need to upgrade to CS6 and if so, how and how will it affect in-design?