Error during goods issue

Hi Gurus,
While doing goods issue of operatings supplies material type we are getting an as follows
Create account 403000 for 18.04.2008 as a cost element in controlling area
Although G/L account and cost element are already created
Message no is KI280
Thanks in Advance
Regards
Ramkumar Wariyar

Check the validity of the cost element and gl account. You may need to extend the validity of the cost element.
Regards
Ram

Similar Messages

  • Error during goods issue-Posting period not open

    Hi ,
    I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
    Thanks,
    Hari.

    Hi,
    Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
    So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
    Hope it helps. Please reward if useful.
    Thanks & Regards
    Sadhu Kishore

  • Error during Goods Issue using movement type U61

    Dear All,
    There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
    I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
    Any guidance or help is welcome
    Regards
    Balaji.J

    Hi,
    The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
    Regards
    Balaji.J

  • Error during Goods Issue "Update was terminated"

    Hi,
    While doing Goods Issue (Mov Type 201), the system save the Document, but when we display the Document, the System gives the following message:
    Update was terminated
    System ID....   DEV
    Client.......   400
    User.....   MMUSER1
    Transaction..   MIGO
    Update key...   B4E937DFC88FF1F3998B00215E73E462
    Generated....   25.03.2010, 14:09:53
    Completed....   25.03.2010, 14:09:53
    Error Info...   F1 109: Line item 001
    Please note that using MMPI, we have opened the back period. There is not problem in posting the Goods Receipt/ Goods Transfer/ Invoice Posting.
    Please help.
    Regards,

    an update termination happens only in an unexpected case, no authority is an expected case and SAP would issue a status message long before posting.
    In your case SAP determined a document number (item number) that is already in the data base. hence it can technically not store the document.
    such things happen if one transports a number range from a development system, but in dev systems the current number is much lower than in a production system, so the next number that is taken from the number range  is already used and stored in a table.
    or if one resets number ranges after an archiving run or for any other intention.

  • Error during Goods Issue Posting to Cost Center

    Hi all,
    I have WM and HUM active.
    I'm trying to post a GI to Cost Center using the transaction MIGO and Movement type 201. I get this error during the transaction:
    Data for creating a delivery is incomplete (Vendor)
    Message no. M7279
    Diagnosis
    The system found that the data required to create a delivery via Shipping is not complete.
    System Response
    The system cannot create a delivery.
    Procedure
    Check that the data for Vendor is maintained in your system:
    loading group
    debtor number
    sales organization
    distribution channel
    division
    shipping condition
    shipping point
    It's strange that the error is specific to vendor because this is an inhouse transfer to a cost center. However, I've maintain the listed items in spro.
    There's still something wrong and I'm at a loss. What am I doing wrong? How can I correct it?
    Any suggestions would be appreciated. Thank you.

    Hello Uzoamaka
    Not sure if this helps you but check out these OSS notes,  first one especially,  and others referred within them.
    Let me know if they help you or otherwise.
    547209 - Backflush of HU storage location generates delivery
    723250 - M7279 when creating a delivery from MB1C

  • Batch determination based on fifo during goods issue

    Hi All,
    My client requirement is that system should propose automatic batch during goods issue based on goods receipt.
    I have activated batch wise split valuation.
    I have maintained  characterstics with MCH1 table and HSDAT.
    Assigned to class and class is assigned to stratergy type.
    Created sort sequence and sort rule ascennding.
    Assigned this to stratergy type.
    Maintained condition record also.
    During goods issue to production system is not proposing the batch based on gr date.
    System is not stopping me while making goods issue with other batch.
    Please guide to fix the above issue.
    Regards,
    Venkatesh

    Split valuation has nothing to do with this problem.
    I hope you do not just require the sequence for physical goods issue  to be FIFO because your year end valuation will be FIFO method, as this is not necessary for FIFO valuation.
    IMG > Ligistics general > batch managment > batch determination > Allocation of batch determination schema and activation >...
    here you set the box for batch check active, which means if a batch is entered manually  then this batch is checked against the batch determination and an error is issued if the wrong batch is entered.

  • Auto populate of vendor in partner Tab during Goods issue- Batch management

    Dear All,
    I there a possibility of populating the Vendor (in partner tab) during goods issue (MVT 601,201, 240 etc).
    Provided the material is batch managed.
    Thanks and Best Regards
    W.Raghuram

    What I feel is that u have to maintain the Batch Characteristics then it is quite possible.
    In std In Partner tab I feel not possible. Not sure other expert may guide you.
    Biswajit

  • MPN Manufacturer batch determination during goods issue

    I am from pharma industry and my business runs with batch management, MPN features.
    Scenario:
    I have 3 different finished product P1, P2 and P3. All three finished products use raw material R1.
    But, I have restrcition like, when I am manufacturing P1 product I can only use R1 of batch from manufacturer M1.
    For P2 material we can use R1 batch from manufacturer M2 only.
    For P3 material we can use R1 batch from manufacturer M1 and M2.
    Now, I have maintained the BOM CS02 batch classification for three differ FGs P1, P2 and P3 with relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    In COB2 T-code I am mainmtaining strategy type CO02 - Order type/Plant/Parent material with child relation ship. Here also, I am maintaining relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    Now, when I am creating process order in COR1, I am getting in case of P1 order R1 material batch determination only batches from M1 manufacturer.
    Same as for P2 material process order R1 material only batches for detrmination from M2 manufacturer.
    Same as for P3 material process order R1 material batch determination option from M1 and M2 only.
    Now, if I don't go for batch determination through Process order and in stead of that if I want the batch determination during goods issue MIGO 261 movement against order, the above manufacturer level control we can't put.
    As in MBC2 T-code, we have standard batch determination and search strategy for material, plant and movement type.
    But, here we can't maintain any parent child relationship.
    Now, can you please suggest how I can control manufactuer batch detrmination as per above strategy during Migo goods issue.
    Through any standard settings we can do or, any exits required?
    Gurus please suggest!

    Dear
    You can do this by using FM CO_WB_BATCH_DETERMINATION or VB_BATCH_DETERMINATION function module.
    here you can sort the batches and compare the Batch results with the batch search strategy.
    Regards,
    R.Brahmankar

  • Automatic batch determination during goods issue

    Hi,
    We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction.  Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
    Thanks & Regards,
    N. Laxman

    Dear Laxman,
    Check these links,
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
    Automatic batch determination
    Re: how to make the batch determination process automatic
    Regards
    Mangalraj.S

  • Automatic Batch Determination during Goods issue of Production Order

    Hi,
    Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
    I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
    Thanks and Regards
    Enrico

    Dear Enrico
    It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
    Configuration Required for your above issue are as follows :
    1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
    2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
    4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
    Create Condition Tables
    Create Access Sequences
    Create Strategy Types
    Batch Search procedure definition
    Batch Search procedure allocation and check activation
    Define Selection classes
    Define sort rules
    Maintain Batch Allocation Strategy Number Ranges
    All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
    5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
    6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
    7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
    Refer the below link for your farther reference :
    http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
    Hope this will be useful
    Regards
    JH
    Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

  • Override consignment price  determination during goods issue process

    Hi ALL,
    My requirement is that User is asking want to override consignment price  determination during
    goods issue process. Is there any BADI/User Exit or  Enhancement spot which can override the price value and in the
    database level during Goods issue.
    If yes provide me the enhancement details and where I can implement.
    I will very thankful to you all if I get your valuable input.
    Regards
    Subhasis

    Dear Laxman,
    Check these links,
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
    Automatic batch determination
    Re: how to make the batch determination process automatic
    Regards
    Mangalraj.S

  • Why decimal Places are allowed during goods issue and Goods receipt for mat

    Why decimal Places are allowed during goods issue and Goods receipt for material with unit of measure PCS.
    MY config allows consumption in decimal places.
    How to restrict this?
    Prem Nivas

    Hi,
    Please check in customizing UOM (T code-CUNI).
    In dimensions check the decimal point for the unit of measurement.
    Regards,
    Krishnendu.

  • DESADV is not generated during Goods issue from VT02N.

    Hello,
    DESADV is generating during goods issue from VL02N.
    But DESADV is not generated during Goods issue from VT02N.
    Any idea what was missing?
    I maintained the variant of RV56ABST for Delivery message with output type LAVA and Medium 6 (EDI).
    Thanks,
    Venkat

    I got reply from SAP. It is as follows:
    Please goto tcode VL10CUC. For Profile 2000, please check whether
    indicator "No OutputDet." is flagged.
    Please unflag that indicator and then retest.
    Please read note 1410599 for more inforamtion.
    Thanks,
    Venkat.

  • FM MM integration - Budget Duplicated during goods issue

    Hi,
    Budget is getting duplicated during goods issue
    Following is the process fallowed:
    Process steps
    T.code
    FM A/c Assignment Update
    Remarks
    Purchase requisition
    ME51N
    Commitment item/Fund/Fund Center
    Budget Consumed
    Purchase requisition Release
    ME54N
    Commitment item/Fund/Fund Center
    Purchase Order
    ME21N
    Commitment item/Fund/Fund Center
    Budget Consumed – PR Reference
    Purchase Order Release
    ME29N
    Commitment item/Fund/Fund Center
    Goods Receipt
    MIGO
    Commitment item/Fund/Fund Center
    Budget Consumed – PO reference
    Material Reservation
    MB21
    Created with reference to WBS Element
    Goods Issue
    MIGO
    Commitment item/Fund/Fund Center
    Budget Duplicated during goods issue (Note: No Purchasing document reference is updated in line item)
    Invoice Receipt
    MIRO
    Payment
    F-53/F-58
    Thanks and Regards,
    Ravindra Kutnikar

    Hi,
    This is a standard SAP behavior. You may assign any DUMMY commitment item in FM derive for Consumption G/L. Create a derivation rule based on G/L and wherever you dont want budget control, put dummy commitment item. Goods receipt and issue are two different flow. As you said, fod goods issue, there is no reference of corresponding goods receipt. Thats the reason why this happens.
    Regards,
    Sudeep.

  • Average price during good issue for a vehicle

    Dear Experts,
    I have a little doubt about how to manage valuation with vehicles, using VMS.
    I understand that the standard VMS solution mantains a valuation type for each vehicle (for each batch for the specific model), am I right? .
    We have a requiriment in my client, that the price calculated during goods issue (the cost) should be the average pice for each model, and it shouldn't be the cost for he specific vehicle.
    Is it posible to manage it with batch valuation in VMS?
    Could I deactivate batch valuation for vehicles in VMS? Or do we have any other choice?
    Thanks for your help!
    Best regards,
    Ignacio

    Hi Ignacio.
    Batch management is required in VMS (http://help.sap.com/saphelp_dimp50/helpdata/EN/91/88c43ace7a3b46e10000000a114084/frameset.htm)
    In which scenario your customer wants to have an average valuation?  Most of the vendors, in a sort of best practice of the industry, use batch valuation.
    Regards.

Maybe you are looking for

  • Notifications from a shared mailbox calendar to a group of people

    HI When a member of staff books a meeting . They add meeting room support as an attendee of the meeting if they need IT assistance . I would like the meeting room support to be a shared mailbox or calendar that sends notifications to a group of peopl

  • Insert with Nested Table

    Hi, I have a table called time_slots CREATE OR REPLACE TYPE type_timeslots AS TABLE OF DATE; CREATE TABLE time_slots time_code VARCHAR2(50), TIME_SLOT TYPE_TIMESLOTS NESTED TABLE TIME_SLOT STORE AS NESTED_TIME_SLOTS I have a SQL which returns multipl

  • Too Many Prints From The cmn_err

    Hi All, I need some help and pointers regarding driver programming on solaris 10 kernel. I have a module that has been ported in the kernel space. And I have changed all the printfs to cmn_err as the simplest logging mechanism and it prints the messa

  • Fn key solutions for Ideapad 415e

    Hello! I just bought an Ideapad 415 and am really liking it thus far. I use the F keys (especially F2, F4, and F12) a lot, so I've already gone to the BIOS to disable the "hotkeys" so now when I press F2 I can directly edit file names and cell entrie

  • How to start learning java language?

    can any one advise me how to start with