Error during GR for asset PO

while doing GR for asset PO system is giving error message of "Acct123 for trans/ev  key ANL, is not a control account
some one plz explain me the reason for this error and how to resolve.

Hi,
You are posting asset through MIGO so GL acocunt being debited for asset has to be Asset Reconciliation Account.
Use ME23N and check GL account for Account assginemnt category A whether GL is control one.
Or you can also check in AO90 that the GL assgined to account determination for particular asset class for depreciation areas is reconciliation one or not.
Check whether u had maintianed GL account for ANL transaction event key in OBYC t.code
Regards,
KK

Similar Messages

  • ICal yields "Error during PUT for mailto:valid@email: iMIP request failed"

    Hello,
    I'm trying to bring up an iCal server (using Mac OS X Lion 10.7.3 Server on a Mac Mini). The basic configuration runs fine. But when I tried to enable eMail invitations, I got stuck with those messages in the error log:
    [twistedcaldav.scheduling.imip#error] Could not do server-to-imip request : <twistedcaldav.scheduling.imip.ScheduleViaIMip object at 0x10075e5d0> User timeout caused connection failure.
    [twistedcaldav.scheduling.scheduler.ScheduleResponseQueue#error] Error during PUT for mailto:valid@email: iMIP request failed
    My configuration settings:
    calendar:Scheduling:CalDAV:EmailDomain = ""
    calendar:Scheduling:CalDAV:HTTPDomain = ""
    calendar:Scheduling:CalDAV:AddressPatterns = _empty_array
    calendar:Scheduling:iMIP:Sending:Server = "valid.mail.server"
    calendar:Scheduling:iMIP:Sending:UseSSL = no
    calendar:Scheduling:iMIP:Sending:Username = "valid@email"
    calendar:Scheduling:iMIP:Sending:Address = "valid@email"
    calendar:Scheduling:iMIP:Sending:Password = "safe_password"
    calendar:Scheduling:iMIP:Sending:Port = 25
    calendar:Scheduling:iMIP:Enabled = yes
    calendar:Scheduling:iMIP:MailGatewayPort = 62310
    calendar:Scheduling:iMIP:Receiving:Server = "valid.mail.server"
    calendar:Scheduling:iMIP:Receiving:UseSSL = yes
    calendar:Scheduling:iMIP:Receiving:Username = "valid_email"
    calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
    calendar:Scheduling:iMIP:Receiving:Type = "imap"
    calendar:Scheduling:iMIP:Receiving:Password = "safe_password"
    calendar:Scheduling:iMIP:Receiving:Port = 993
    calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
    calendar:Scheduling:iMIP:MailGatewayServer = "valid.mail.server"
    calendar:Scheduling:iSchedule:Enabled = no
    calendar:Scheduling:iSchedule:Servers = "servertoserver.xml"
    calendar:Scheduling:iSchedule:AddressPatterns = _empty_array
    It does not even try to connect to the given smtp server. How do I proceed?

    I dug into the sources, and am now smarter
    the above settings are invalid, because of the gateway (this has to be iCal itself):
    calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
    Now the IMAP server is being asked, but now I have the next problem:
    [mailgateway] 2012-03-27 11:14:37+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] Scheduling next IMAP4 poll
    [mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready.
    [mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP servergreeting
    [mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0001 AUTHENTICATE PLAIN
    [mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: +
    [mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 1GNhbEwhZHNwZXJ0LmRlAFlpZXE5YW==
    [mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0001 NO [AUTHENTICATIONFAILED] Authentication failed.
    [mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP authenticate failed for valid@email, trying login
    [mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0002 LOGIN "valid@email" "valid_password"
    [mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0002 NO [AUTHENTICATIONFAILED] Authentication failed.
    [mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#error] IMAP login failed for valid@email
    [mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] IMAP factory connection lost

  • Essbase Error(1200329): Error compiling formula for [Asset Description] (li

    Hi,
    I am having some problem in debugging one error
    Detail:Cannot calculate. Essbase Error(1200329): Error compiling formula for [Asset Description] (line 37): invalid assignment
    I am just creating a Add asset script as my client does not have license to CapEx module.
    Script Below- please let me know what can be an issue
    VAR numAsset = [NumAsset];
    VAR usFulLife=[UsefulLife];
    FIX(@CHILDREN("Total New"), [Scenario], [Version], [Entity], [Department], [AssetClass],[Year],"BegBalance","Local", "HSP_InputValue")
    "Asset Description" (
    IF (numAsset > 0 AND @MAXS(SKIPMISSING, @CHILDREN("Asset Properties")) == #MISSING )
    numAsset = numAsset - 1;
              "Asset Status" = 0; /* flag to know this is a new asset*/
              "Asset ID" = [AssetID];
    "Asset Description" = [AssetDesc];
              "CAR No." = [AssetCAR];
              "Purchase Units" = [AssetUnits];
              "Purchase Amount(per unit)" = [AssetRate];
              "In Service Date" = [InserviceDate];
         /*     "Total Cost" = "Purchase Units" *"Purchase Amount(per unit)";*/
    IF(usFulLife > 0)
              "Useful Life (in Years)" = usFulLife;
    ELSE
                   "Useful Life (in Years)" = "No Scenario"->"No Version"->"No Entity"->"No Department"->"No LineItem"->"Useful Life (in Years)";
    ENDIF
    ENDIF
    ENDFIX
    FIX([Scenario], [Version], [Entity], [Department], "Local", "HSP_InputValue")
    CALC DIM ("TimePeriod");
    @IANCESTORS("Line Item 1");
    @ANCESTORS([AssetClass]);
    ENDFIX
    Note- "Asset Description" is a member of Text type and in this script [AssetDesc] is a global variable of StringAsNumber
    Regards,
    -KP

    Thanks for responding but my issue resolved, it was a Space in the member name.
    -KP

  • Error during search for WM movement type (999   E  )

    Dear ALL,
    I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
    "Error during search for WM movement type (999   E  )"
    Could someone help me please ?
    Thanks & Best regrads,
    Saiful arif

    Hi,
    Please check the reference  movement type  in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
    For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
    for  qty updation indicator not checked, you will have reference movement type 999
    qty updation indicator checked means stock / quantity controlled in which case
    check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
    then check for WM movement 3YY in Transaction OMLJ which should have source storage  type maintained.
    qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR,  moreover it is no stock / qty and no stock transfers situation
    If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
    Please note 999 as WM movement  is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
    Hope this should solve your problem.
    Regds
    Shrihari

  • Error during search for WM movement type (911)

    Hi gurus,
    I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
    "Error during search for WM movement type (911)"
    any idea of this message?
    Thanks in advance

    The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
    Lakshman

  • Error during search for movement type (953)

    Hi All,
             When I'm trying to issue goods to an internal order, I get the below error
    Error during search for movement type (953)
    The explanation is as follows
    The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
    In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
    Is there some config missing in this case?? Please let me know how to overcome this error
    Regards,
    Ashwin

    when you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
    This customizing needs to be done in IMG > LE > WM > Activities > transfers >  define movement types
    and
    IMG > LE > WM > interfaces > inventory management > define movement types

  • Error during search for WM movement type (652 1 L   )

    Hi Guys,
    For return order,we have created return delivery and PGR,Material Doc was created in the background TR and TO also created.Confirmed the TO.
    Now we trying to reverse the PGR and Delivery from Transaction VL09,we are getting the following error.
    Error during search for WM movement type (652 1 L   )
    Please reply ASAP,it's very urgent
    Regards,
    Kiran

    insert this entry, it will work.
    regards,
    Yu

  • WM-Error during search for WM movement type (261 )

    HI FRIENDS
               I HAVE THE ERROR DURING GOODS ISSUE FOR PRODUCTION ORDER...
               PLS SUGGEST ME TO SOLVE THIS ISSUE
    Error during search for WM movement type (261 )
    Message no. L9 005
    Diagnosis
    A movement type of the Warehouse Management system and certain parameters are assigned to each movement type of the Inventory Management system.
    In this case, no movement type of the Warehouse Management system was assigned to the Inventory Management movement type used by the parameters enclosed in parentheses in the error message.
    Procedure
    Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
    WIHT REGARDS
    DINESH

    Hi,
    The IM and WM linkage may not be proper for the movement type. Maintain an entry for your warehouse with movement type 261  and Movment Indicator l combination in transaction OMLR. In the "Assign WM Movement Type References to IM Movement Types" section (button), change the "Reference Movement Type WM" to 261 (to match "Reference Mvmt Type" under button LE-WM "Interface to Inventory Management")
    And also .....
    Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location. I hope this will help you. Thanking you.

  • SAP_BASIS IMPORT_PROPER Error during SPAM for CRM Upgrade

    Hi All,
    During SPAM IMPORT_PROPER for component SAP_BASIS, encountered error. Checking the Import Logs of the queue, we see error logs in Activate inactive runtime objects. Sample message below.
    May we ask how to fix the error for us to be able to continue the upgrade? Thanks.
       Activation of sample nametabs with appended fields
       06:17:30: Retcode 512: error in DDL statement for ALCCMCUSTP                     - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of ALCCMCUSTP
       06:17:42: Retcode 512: error in DDL statement for ALCCMCUSTV                     - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of ALCCMCUSTV
       06:17:55: Retcode 512: error in DDL statement for ARC_DESTR_VETO                 - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of ARC_DESTR_VETO
       06:18:07: Retcode 512: error in DDL statement for DB6_OPTPROFILE                 - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of DB6_OPTPROFILE
       06:18:19: Retcode 512: error in DDL statement for FDT_TRACE_0200                 - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of FDT_TRACE_0200
       06:18:31: Retcode 512: error in DDL statement for FDT_TRACE_0201                 - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of FDT_TRACE_0201
       06:18:43: Retcode 512: error in DDL statement for GE071KF_OLD_NT                 - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of GE071KF_OLD_NT
       06:18:55: Retcode 512: error in DDL statement for GTABKEYEXC20                   - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of GTABKEYEXC20
       06:19:07: Retcode 512: error in DDL statement for GTABKEY_CASCADE                - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of GTABKEY_CASCADE
       06:19:19: Retcode 512: error in DDL statement for GTABKEY_COMPEXCL               - repea
       t
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of GTABKEY_COMPEXCL
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of GTABKEY_COMPSETS
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of GTABKEY_C_SYS
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of GTABKEY_EXT
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLS
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of IACXU
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLS
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of IACXUT
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLS
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of IACXU_C1
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of IACXU_C_TEMP
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of STORE_HELP
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of STORE_LINK_IND
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of SWWOUTBOX
       Error -204-SQL0204N when executing ADD-FIELD of  is an undefined name.  SQLSTA
       Error  in DDL statement for when executing ADD-FIELD of
               (dummy, do not translate)
       No DDL commands found for activation of SWWWITEXT
               21 shadow nametab activations resulted in errors
       Begin:  Activation of shadow nametabs with DDL (2014/03/19 06:17:30)
       End:    Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
       Begin:  Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
               (dummy, do not translate)
    Regards,
    Philip

    Hi Philip,
    Could you please check the below SAP Note. It is a composite notes which has listing of various errors during upgrade
    822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
    Hope this will be useful
    Thanks and Regards
    DJ

  • Runtime Error during Creation of Asset (AS01)

    Hello Everyone !
    I have been trying to CREATE ASSET for a long time but  unfortunatly land up on ..... RUNTIME ERROR. I used all the possible ways to get it solved but i am stuck. Error analysis says The ASSERT Condition was violated.
    Hope you guys would help me out and push my knowledge further. Answers would be highly appreciated.
    Srinivas.

    Hi Srinivas,
    I found more information about your issue. These are notes that have been given by SAP in regards to the "ASSERTION_FAILED" runtime error in AS01 or also AS91.
    931764    Runtime error ASSERTION_FAILED
    989402    Expand/Collapse All events in planning hang t
    951191    AA 908, AA 698, AA 475, incorrect ANLC values
    932560    ITAB_DUPLICATE_KEY runtime error
    971300    AA610 for fixed asset creation, change or recalculation
    988238 FAQ New depreciation calculation
    949802 AS91: Dump ASSERTION_FAILED in CF_FAA_CFG_TRANSACTION
    Please be aware of note 988238 which is a composite note with many erros in FI-AA when in ECC 6.0  It advices to:
    "Implement the following notes or import at least Support Package 6 for the components EA-APPL and SAP_APPL (available as of October 2006)."
    Check also note  949802.
    I hope this helps.
    Best Regards,
    Vanessa.

  • Error during distribution for compiled code generation-Reply

    Hi,
    Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
    There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
    If its the invalid class problem you'll find a message like:
    Generating code for partition BLTCustomWindow_cl0_Part1.
    ERROR: Exiting due to following exception:
    SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
    exception. See the remainder of the error stack for more information.
    Class: qqsp_ResourceException
    Error #: [1001, 3]
    Detected at: qqrt_ForteExecAgent::LoadPartition at 1
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor", (partitionId =
    9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
    (0x4ecd,0x19a)
    Class: qqsp_ImplementationException
    Detected at: qqcg_TRclass::SetClass at 2
    Last TOOL statement: method ForteCompiler.ProcessPGF
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
    c4tstdrv > setrepos star8
    c4tstdrv > setwork dmcompiledbuild
    c4tstdrv > open
    Type Service Flags Level
    err sh * 255
    trc rp 1 4
    c4tstdrv > findproj productbmservices
    c4tstdrv > cleanuprtclasses
    Removing extraneous RTclass ProductShootingLocationMgrProxy
    Removing extraneous RTclass PRTerritoryBaseMgrProxy
    Removing extraneous RTclass PRTerritoryMgrProxy
    Removing extraneous RTclass TalentBaseMgrProxy
    Removing extraneous RTclass TalentTypeMgrProxy
    Removing extraneous RTclass TitleTypeBaseMgrProxy
    Removing extraneous RTclass TitleTypeMgrProxy
    Removing extraneous RTclass ProductSecurityBaseClass
    Removing extraneous RTclass ProductSecurityBaseQuery
    Removing extraneous RTclass ProductSecurityQuery
    Removing extraneous RTclass ProductSecurityMgrProxy
    c4tstdrv > commit
    c4tstdrv > exit
    Integrate the changes to the workspace, start the build again and this should have cured the problem.
    However, its hard to know what the cause of your problem is without seeing the output in the log files.
    Good luck.
    Mark Carruthers
    20th Century Fox
    "Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
    Hi,
    I'm doing application distribution for my application using a fscript
    script and am forcing compilation on 2 of my partitions.
    This I have been doing from quite sometime successfully. Recently I
    developed a new service and plugged it into my application for
    deployment.
    I'm successfully able to distribute & deploy the interpreted code. But
    I'm getting a long list of system errors when I try doing distribution
    for compiled code. And I see only one of the .exe generated instead of
    two because of which I'm unable to go ahead with installaion. I would
    appreciate if anybody let me know why this's happening ?. The following
    is the main chunk of this error list.
    Thanks in advance.
    --Anand Ramaswamy
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Can not initially communicate with the object named
    (Unnamed),
    which is supposed to be in partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 140]
    Detected at: qqdo_ProxyMgr::CheckAccess at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Attempt to send to unknown destination partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 102]
    Detected at: qqdo_PartitionMgr::SendMsg at 1
    Error Time: Fri Jan 22 10:44:22
    Distributed method called: qqdo_InternalMessage.<Message> (object
    name
    Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
    (partitionId
    = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
    no
    longer exists. The process associated with the partition probably
    terminated.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::CheckStarted at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #2.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:19
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: The load balanced router is disabled or has no members.
    This
    can happen if all of the members terminated or failed.
    Class: qqsp_DistAccessException
    Error #: [601, 161]
    Detected at: qqdo_LbRouter::Route at 1
    Error Time: Fri Jan 22 10:44:19
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Access to a load balanced router member (which is a
    service
    object) failed for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 162]
    Detected at: qqdo_LbRouter::Route at 2
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This distributed reference was previously invalidated due
    to the
    reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 132]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi,
    If this INCLUDE is in a function group go the MAIN program and activate from there.
    Can you list out the include name?
    a®

  • Error during MIRO for tax code .

    Dear All ,
                            User is doing MIRO but an error comes as " Tax code V0 does not exist in TAXINN " , here i need to tell u that what had happened that in P.O the material is not charged  with any tax , so user have given tax code as V0 , but he had forgotten to maintain cond for BED non cenvatable %  so he had made the cond. record in FV11 , Here my querry is that during MIRO the tax code V0 without cond record gives error from where the system is not capable to fetch the data ?
    OR is there any check so that in such cond. the error should be like this " No cond record is maintained for V0." instaed of
    " Tax code V0 does not existsin TAXINN "
    Rgds
    sap12

    U need the user should assign tax code V0 for non-taxable materials.
    Error what it giving is correct. U should assign this V0 to ur tax Procedure TAXINN.
    Path to Assign
    Spro - IMG - Financial Accounting(New) - FA Global settings - Tax on Sales/ Purchase - Calculation - Taxcodes for Tax-Excempt Sales.
    Procedure - TaxCode - Reason
    If ur not able to solve the problem, Send me ur requrement clearly.
    Subramanian.R

  • ORA-00955 Errors during R3load for WEB AS Abap 6.40 installation

    Dear Gurus,
    I am encountering a problem during the R3load phase of the WEB AS ABAP 6.40 DB instance installation; I have patched the Oracle Database using the 9.2.0.7 patch set beforehand and resumed the SAPINST. There after errors occur during the DB load phase, below are the logs for reference (there are multiple occurences of 'ORA-00955: name is already used by an existing object' in existing logs)
    /sapmnt/P21/exe/R3load: START OF LOG: 20080627032739
    /sapmnt/P21/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/P21/exe/R3load: version R6.40/V1.4 [UNICODE]
    /sapmnt/P21/exe/R3load -ctf I /sapcd/NetweaverSR1_Export/EXP3/DATA/SAPDODS.STR /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC
    /DB/DDLORA.TPL /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.TSK ORA -l /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_O
    RA_UC/DB/SAPDODS.log
    /sapmnt/P21/exe/R3load: job completed
    /sapmnt/P21/exe/R3load: END OF LOG: 20080627032739
    /sapmnt/P21/exe/R3load: START OF LOG: 20080627032814
    /sapmnt/P21/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/P21/exe/R3load: version R6.40/V1.4 [UNICODE]
    /sapmnt/P21/exe/R3load -dbcodepage 4102 -i /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.cmd -l /tmp/sapinst_inst
    dir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (rscpsumg) Please look also into "/tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS001.xml".
    (DB) ERROR: DDL statement failed
    (CREATE TABLE "RSDMODSTAB" ( "CHARACT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "ATTRIBUTE" VARCHAR2(3) DEFAULT ' ' NOT NULL  ) TA
    BLESPACE PSAPP21 STORAGE (INITIAL 16384 NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 102
      (SQL error 955)
      error message returned by DbSl:
    ORA-00955: name is already used by an existing object
    (DB) INFO: disconnected from DB
    /sapmnt/P21/exe/R3load: job finished with 1 error(s)
    /sapmnt/P21/exe/R3load: END OF LOG: 20080627032815
    /sapmnt/P21/exe/R3load: START OF LOG: 20080627035407
    /sapmnt/P21/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /sapmnt/P21/exe/R3load: version R6.40/V1.4 [UNICODE]
    /sapmnt/P21/exe/R3load -dbcodepage 4102 -i /tmp/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.cmd -l /tmp/sapinst_inst
    dir/NW04SR1/WEBAS_ABAP_ORA_UC/DB/SAPDODS.log -stop_on_error

    Hello,
    Strange error, check if you didn't run out of space. If this is new installation, nor upgrade or migration, I would suggest to you drop the table and re-run export once more.
    Otherwise you can open message to SAP as you can expect that this will happen also for other tables. Looks table or tables exist at Oracle but sapinst don't have info about it
    Peter

  • Date error during creation of asset master using bapi

    Hi All,
    Am creating asset master using BAPI_FIXEDASSET_OVRTAKE_CREATE ,,
    but am getting date problem while passing value  '21022005'  ( or any date )  in the format  'ddmmyyyy' 
    the error says 'the capitalization date is invalid' ....
    the capitalization date is under  the structure BAPI1022_FEGLG002 of the above mentioned bapi....
    even i have tried using '21.02.2005' its still not working as the capitalization date is 8 char...
    kindly help me out with the possibilities
    thanks
    john

    Hi John,
    Some of the structures you have to fill for the IDOC belongs to a  referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.                                                                               
    When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to  specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.                                                 
    Regards Bernhard

  • Error during creation of asset.

    Hello, when i am creating an asset for a certain asset class, i am getting an error popup which reads 'Customizing inconsistency - missing/incorrect entry in table T093B'.The depreciation area associated with the asset class has been created by copy in my opinion. Anyone encountered a similar message.
    thx in advance.

    Hi,
    The error is more generic in nature, nornmally you need to check the customizing settings there is an expert area where you can peform the checking,goto asset accounting  --> overview for experts .
    Perform the step by step checking then you will be able to identify out the error. but if there is any specific message then let us know
    regards,
    Bharathi

Maybe you are looking for