Error During importing Transport Request into New Refreshed system

Dear Experts,
we have refreshed the Development BI system ( DB0 ) with DB1 which is
our New development system for Release 2 on Nov 5th ,2007. The
additional transports which went successfully to production till date
should to be manually moved to DB1.Some of the transports which are
involved ODS are getting failed with the below Error.
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
Activation of Objects with Type DataStore Object
Checking Objects with Type DataStore Object
Checking DataStore Object ZOTCODF3
DataStore object ZOTCODF3 is consistent
Saving Objects with Type DataStore Object
Internal Activation (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Change log for DataStore object "ZOTCODF3" saved successfully
Activate all Dictionary objects ( 5 ):
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZOTCODF3
Creating Export DataSource and dependent Objects
The creation of the export DataSource failedReading the Metadata of ZOTCODF3 ...
Creating DataSource 8ZOTCODF3 ...
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)Error when creating the export DataSource and dependent ObjectsCompare active / modified versions for DataStore object &2
Update/activation program for DataStore object ZOTCODF3 is being regenerated
Error when activating DataStore Object ZOTCODF3
Resetting of Incorrect Objects Back to the Active Version (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Versioning not possible for PSA 8ZOTCODF3_CA
Error while saving change log for DataStore object ZOTCODF3
When i tried to reimport, DDIC is getting locked.we havent changed DDIC
password as we confirmed logging with the password we have.
we are on Stack 11. Please help us in resolving the issue at the
earliest.
Regards
Ravi Patneedi

Hi,
Ask Basis people, to check myself datamart RFC login through SM59 via background user(ALEREMOTE). Issue related with Initial password .
Regards,
Saran

Similar Messages

"update rules inactive " error when importing transport request

Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!

Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

Importing transport request into CE7.1 giving trouble

Hi All,
When we are trying to import the transport *.sda files into CE7.1. Guided Procedures->Administration->transport--->import transport Requests giving No endpoint alias has been maintained; create an endpoint alias first.
If we try to create End point configuration there is no SAP System. Can i have any idea to solve this problem.
---> i have to give any other privileges or i have to enable any thing
Please let me know .....
Thanks and Regards,
Sridhar

I got the solution through this
http://help.sap.com/saphelp_nwce711/helpdata/en/43/F3C42571122AE3E10000000A422035/content.htm

Error while importting Transport Request

Hi,
I am getting following errors while Transporting requests from Development to Test System
Error getting fields for PSA /BIC/B0000643
Error occurred during post-handling RS_AFTER_IMPORT ofr DTPA L
The Transport request just contains one Transformation the corresponding DTP.
We are using BI 7 for Bank Analyzer and have just imported SP11. This problem has started coming only after the import of SP11.

Hi Pom,
Yes the DS were active. I tried to re-transport that too but the TR failed with similar error.
Finally I tried to manually activate the DTP in the Target system and got the same error. I rectified the problem by deleting the DTP from the Target system. But I am not sure why this happened. Please let me know if you have any idea abt the same.
Thanks
Pooja

Customer routine during importing transport request

Dear SAP-Specialists,
the SAP-standard defines some objects as master data, but in our point of view it is not! So we want to transport these data (tableentries) via transportrequests to "qa" and productive system. But in case of some dependecies in the tables and the usage of GUIDS makes it important to get the possability to influence the data of the tables in the transportreaquest during the import-process in the system to prevent duplicate keys and so on.
Is there any chance to realize this ?
Thanks,
André

Hello Gabriel,
you are right - some of the tables come from SAP standard with type 'A'. We found some functions to create a transport-request (TR) via ABAP-Code and collect all Masterdate-Tableentry's together in that TR. But the Key's of the table are GUID's. If they are now "normaly" imported in the target system, then the GUID's can be double, cause they can exist already in the target system. The second part of the data is an external-ID for wich we have to generate a system specific GUID during the import of the tabledata. Therefore we are looking for an user exit ore somthing like this - or if there is realy now wayto do this in that way, than we have to write some RFC-Functionmodules to transfer the data - but this is not the prefered way....

Error After Importing Transport Request ( DEV to QA)

Hi Experts,
I have transported APCO, AREA and IOBJ. Now I'm transporting Infosource for Master Data. For testing purpose I've transported 0EMPLOYEE (transfer rules & transfer structure).Its failed with return code 8.
The following log was displayed..
Data element for InfoObject TXTMD could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. When creating such a data element for InfoObject TXTMD errors occurred. The data element should be of type CHAR and length 000040.
Procedure
Check the log.
Check the data element /BIC/OW_###################### in ABAP Dictionary. Activate data element /BIC/OW_###################### there, and, if necessary, check the activation log.
Error when determining a number from object BI_TSDTEL and number 01
Message no. RSAR711
Diagnosis
When determining a number from number range object BI_TSDTEL and number range interval 01 an error occurred.
Procedure
Ensure that the number range object BI_TSDTEL and number range interval 01 have been created and free numbers made available.
Data element for InfoObject TXTMD could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. When creating such a data element for InfoObject TXTMD errors occurred. The data element should be of type CHAR and length 000040.
Procedure
Check the log.
Check the data element /BIC/OW_###################### in ABAP Dictionary. Activate data element /BIC/OW_###################### there, and, if necessary, check the activation log.
could anyone tell me what are the actions should be taken prior to transports to Quality/Production.
Please provide inputs for this .........
Thanks&regards
SK

Hi Bhanu,
Thanks for your reply, but in this case I am getting the same error message for
the following objects also.
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Data element for InfoObject AUFNR 0PM_ORDER could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject TXTMD could not be created
Data element for InfoObject EVDAT 0DATE could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
As per the note given by you I would like to know about BI_TSDTEL. Because when I am trying to created number range for this object its showing pop-up that objects can only created by SAP package and these objects could not be saved under local package.
Please tell me the procedure for this, how can I solve the above problems.
Thanks & Regards
SK

Error Message during Import of Photos into Movie????

I am having problems importing photos into my movie. Once I have dragged the photo into the desired position in the clip viewer it comes up with an error message - "Error during Import - the file could not be imported (-33)"
I am importing from an album in my iphoto with the Ken Burns Effect on. Even with the Ken Burns effect off, the same message appears
Any help or suggestions would be greatly appreciated
Thanks

-33 means "directory full", which means there are too many files in a folder.
iMovie supports up to 999 photos in the same project. If you have less, there is a problem with your hard drive. Boot from you OS X install CD/DVD and run Disk Utility to repair your hard drive.

How to import external Transport request into sap system

Hi Gurus,
I have Transport request in the cofiles and data files into one sap system
how to import those files into another sap system (those are different sap systems)
could u tel anyone any settings is required and how to import Those Transport request.
Any help is appreciated.
Thanks in Advance

Hi Siva,
After copied the datafile and cofile in the target system go to Tcode STMS> select the target system import queue,there you go to menu extras>other request-->add, give the request no and excute it.
It will put the request in the que then you can import it to the target system.
Thanks,
Satyabrat

Error while uploading Transport request

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
Deepak

Hi,
Check the versions of the two sap systems you are downloading and uploading the transport requests

Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali Papana

Did you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

Error While importing SAP query into quality system

Hi,
When Itried to import the dataset(Transport Request) generated in develoment system into Quality system I am getting the following error.
Query already exists and Infoset contains a structures which is not there in data dictionary .
How to oversome this error to import successfully into quality system
thanks

hi,
You need to transport your Z tables to the quality.
Make sure you transport all the data elements , domain.. etc to the quality.
Thats why its giving you the error.
It does not find the Z tables in Quality
Regards,
Vinod

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

Error During Import: File Could Not Be Imported

I am trying to load some .AVI movies from my digital camera into iMovie; most of them will, but 1 or 2 for some reason will not. I have played some of these videos on my old G3, which I replaced with this new computer; most loaded in OK.
The clips that won't load look smaller than the others when playing (don't know why). I played the movies and converted them to Quicktime again in MPEG Streamclip and they played fine (also in VLC PLayer, FWIW).
I am getting this error message: Error during Import: File Could Not Be Imported.
Also, I am trying to change the orientation of one clip that I inadvertently shot sideways; I did this in Bitlist but it won't load now into iMovie. Is there away to change the orientation in Quicktime (I'm not buying QT pro) or another free converter that will work?
Thanks in advance...

try to ...
* open the avi/mpegs in Streamclip
* choose 'DV stream' as export option
* in the 'DV stream' dialog, you're offered the option 'turn'.. rotate in the wanted direction and choose '75%' size to get all into the video...

SEVERE: DB Error during import of BC_SL_ACTIVE_PARTS

Hello all,
We are trying to perform the system refresh using sapinst (load based) on AIX/DB2 UDB environment.
During the "Import Java Dump" phase, we are getting the below error;
SEVERE: DB Error during import of BC_SL_ACTIVE_PARTS
SEVERE: Message: The object of type java.sql.Date with the value '2006-06-22 07:
00:00.0' assigned to host variable 5 is not normalized. It must not contain time
components in the time zone running the virtual machine.
SEVERE: SQLState: SAP06
SEVERE: ErrorCode: 1001124
As per the OSS note 915548 we changed the Server & Desktop time zone to GMT+01:00, and started a fresh installation.
However we are still facing the same issue. Does anybody have a resolution for this, if so please help me, I shall definitely reward you.
Thanks in advance.
Regards,
Kiran.

Hello,
I've got exactly the same problem.
I was installing a CRM50 Unicode System, using a System Copy procedure.
(Source System platform: Win2003 x86, MsSQL2005, j2sdk-1_4_2_13-windows-i586-p.exe)
Into a Target System Platform:
- Processor Geniune Intel Xeon 3 Ghz x86
- Windows 2003 x64 bits
- MS SQL Server 2005
- j2sdk-1_4_2_13-windows-amd64.exe --> 941595 - Download J2SE 1.4.2 for the x64 platform Java
- j2sdk-1_4_2_13-windows-i586-p.exe
(both Java versions installed, according to the Sap note)
I already did what you said:
- Change timezone
- Uninstall CRM50, using sapinst\Aditional Software Life Cycle Task\...
- Reebot the server
- Staring a fresh installation again
Please advise, I've been working for the last four days on this, with no luck.
Maybe the problem is java version, perhaps j2sdk-1_4_2_09-windows-amd64.exe or another one would be enough, or, I need to reinstall everything since the beginning, including MSSQL2005.
Can someone help us out please, thanks.

Program for Importing Transport Request

Dear all,
I am thinking of writing a program to perform the import of transport request into the system after the transport request is added to the buffer.
The transport request is added to the buffer using FTP.
Please kindly give me some guidance as to how can I write this program for importing transport request. Thank you.

Hi Prashant,
My 2 systems are not linked to each other, one is running SAP 4.7 and the other is running ECC6.0. Can I still use STMS_IMPORT?
When I use STMS_IMPORT, I hit some errors. It is either "tp finished: A tool used by tp broke down" or "tp finished: A tool used by tp aborted". DO you have any idea what is wrong? Thanks for your help.

Error During importing Transport Request into New Refreshed system

Similar Messages

Maybe you are looking for