Error during Init loading

Hi All,
I am loading the data from source system to infocube. And extraction mode as init load.When I am executing, I am getting an ABAP Debugger window and I am unable to load the data.
Please could help, how to load the data without getting ABAP Debugger window.
Thanks in Advance.

Hi Abdul,
Please look for start routine, end routine, field routine, Transformation routine, Update rule routine and check either of this have any break point set in the code.
Also if you are using DTP, check the settings over there, whether you have selected Debug mode while scheduling the load.
This might help!
Regards,
Melissa

Similar Messages

Error during database load in ECC 5.0

Hello All,
i am trying to install ECC.5 with oracle 10g during database load phase he is giving me a error when i saw in log file i found this.
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: START OF LOG: 20090611085559
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\EPT\SYS\exe\run/R3load.exe -ctf I E:/sap5/51031332_1/EXP1/DATA/SAP0000.STR C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.TSK ORA -l C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.log -o D
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: END OF LOG: 20090611085559
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: START OF LOG: 20090611103425
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\EPT\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.cmd -l C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: END OF LOG: 20090611103428
can anybody help me to sort this out.
Any help highly appreciated.
Thanks & Regards
Subhash

First of all thanks for helping me
i have tried this
Connected to an idle instance.
SQL> STARTUP MOUNT
ORACLE instance started.
Total System Global Area 205520896 bytes
Fixed Size                  1248116 bytes
Variable Size             117441676 bytes
Database Buffers           83886080 bytes
Redo Buffers                2945024 bytes
Database mounted.
SQL> SET AUTORECOVERY ON
SQL> RECOVER DATABASE
ORA-00279: change 262364 generated at 06/11/2009 09:43:56 needed for thread 1
ORA-00289: suggestion : C:\ORACLE\EPT\ORAARCH\EPTARCHARC00052_0689209324.001
ORA-00280: change 262364 for thread 1 is in sequence #52
ORA-00308: cannot open archived log
'C:\ORACLE\EPT\ORAARCH\EPTARCHARC00052_0689209324.001'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
But i m not able to see any archive file on oraarch folder
Regards
Subhash

Strange Error During Page Load in Debug Mode (only) - Please Help!

Hi All,
Data base version: oracle 11g
Apex version: Apex 4.1.1
Webserver: Apache
Need help with how to troubleshoot a Critical problem. The following error only occurs during page load in "Debug" mode. And, only occurs on a specific page within the application. A web page is served-up containing the following message and the application is blocked from running the page. The browser's (IE 8.0) back button must be clicked to proceed outside of "Debug" mode.
"Error occurred while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Debug log follows:
"S H O W: application="2006" page="6" workspace="" request="" session="500549669426301"
Computation point: Before Header
...Perform computation of item: APP_SERVER, type=FUNCTION_BODY
...Performing function body computation
...Execute Statement: declare function x return varchar2 is begin return owa_util.get_cgi_env('SERVER_NAME'); return null; end; begin wwv_flow.g_computation_result_vc := x; end;
......Result = 156.9.122.214
...Session State: Save "APP_SERVER" - saving same value: "156.9.122.214"
Processes - point: BEFORE_HEADER
...Process "GET_POSITION" - Type: PLSQL
...Execute Statement: begin wwv_flow.g_boolean := :F109_POSITION_ID IS NULL and :APP_PAGE_ID != 101; end;
......Result = FALSE
......Skip because condition or authorization evaluates to FALSE
...Process "Get JARS Sifter Log File Record Count" - Type: PLSQL
...Execute Statement: begin DECLARE vcnt NUMBER := 0; BEGIN d('Get JARS Sifter Log File Record Count'); Select count(*) into vcnt From JARS.JARS_SIFTER_LOG Where moveid = to_number(:P6_MOVEID) and sifter_status IN ('F','J'); :F1000_P6_SIFTER_LOG_COUNT := to_char(vcnt); END; end;
Custom: Get JARS Sifter Log File Record Count
...Process "Set PTM Planned Trip Status" - Type: PLSQL
......Skip because condition or authorization evaluates to FALSE
...compatibility mode - do not set mime type
...compatibility mode - do not set additional http headers
...close http header
...metadata, fetch item type settings
...metadata, fetch items
Show page template header
Rendering form open tag and internal values
Add error onto error stack
...Error data:
......message: Error processing request.
......additional_info: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......display_location: ON_ERROR_PAGE
......is_internal_error: true
......apex_error_code: APEX.UNHANDLED_ERROR
......ora_sqlcode: -6502
......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 3027 ORA-06512: at "APEX_040100.WWV_FLOW", line 7867
...Show Error on Error Page
......Performing rollback
Rendering form open tag and internal values
...Unhandled Error while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small
...Error Backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 2707 ORA-06512: at "APEX_040100.WWV_FLOW_ERROR", line 185
End Page Rendering"
Thanks!
Bernard

All,
It appears that the page Javascript maximum limit size was reached. The error stopped appearing after some of the page Javascript code was removed out to Application Static Files. I wonder if there exists any "direct" indicator by the system whenever the size limit has been reached?
Again, the run error only occurred when the page was loaded in "Debug" mode.
Bernard

Error while init load of ODS

HI Gurus,
I deleted entire ODS data.And now want to do reinit load.But i am getting below error.
From where I can see and delete delta queue.How to do that resetting status and all..
Error for init package :
Deltas have already been loaded for the init. selection of request REQU_4EBWUXD8QKYLD7YV635G17CCR. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
Choose the menu entry 'Init. Selections in the Source System' from the Scheduler.
Please help.
Thanks,
Prasanna N.
Edited by: prasanna nadgouda on Jul 1, 2009 8:44 PM
Edited by: prasanna nadgouda on Jul 1, 2009 8:58 PM

HI,
While deleting that init request I get an warning..
If the delta process of your DataSource stipulates serialization, you can no longer post this init request or any subsequently requested delta requests to the DataStore objects that were filled previously, after you have deleted the initialization and reinitialized. This is because old inits and deltas still exist.
The DataStore object recognizes that new inits and deltas have been created that are not yet posted in the DataStore object and requires them to be updated. Otherwise the selections of the new inits overlap with the selections of the old inits that are still in the DataStore object, so that they cannot be posted.
Does this is somthing critical..How should I go ahead..?

Lock Object error during batch load

Batch load was delayed about an hour. First error message in the Server Log said "Object is already locked by user""Error 1053010 processing request [Lock Object]-Disconnecting"Then it went through a series of "Object locked by user admin" and "received client request: create Temporary Object(from user admin)"It did this several times until connection.Although from time to time we have had problems with Objects getting locked and preventing maintenance in the Application Manager. This is the first time that is has prevented a batch load. Does anyone know what could have triggered this during the load process?

This happened to us a lot, I think it's due to people opening objects, then letting their session time out, leaving a phantom lock.We solved the problem by calling the UNLOCKOBJECT function before any dimbuilds. 99.9% of the time this raises an error, "..object x is not locked..", but the rare time that the otl is inadvertently locked, it prevents the script from failing. HTH, Jeff McAhren Dallas, Texas ex to unlock the outline for app/db flash: UNLOCKOBJECT 1, "FLASH" "FLASH" "FLASH"

[SOLVED] alsa daemon error during init with Thinkpad X220

Hi,
I just updated my system (including a kernel update). After reboot, I found alsa daemon, which is used to restore previous volume level, failed to start. I tried to start that daemon manually after the boot process is completed, and that produced an error message
sudo rc.d start alsa
:: Restoring ALSA Levels [BUSY]
Found hardware: "HDA-Intel" "Intel CougarPoint HDMI" "HDA:14f1506e,17aa21da,00100000 HDA:80862805,80860101,00100000" "0x17aa" "0x21da"
Hardware is initialized using a generic method
[FAIL]
However, the volume level restored successfully. It seems that recent Intel plantform provides two soundcard, and that error only affected the secondary card, which has nothing to do about system volume level.
Anyway, I hate to have a ``[FAIL]'' During init process. Any suggesting to get rid of that problem? Thanks
System Info: (I use linux-ck as my kernel with modified config)
uname -a
Linux Thomas 3.2.1-2-ck #1 SMP PREEMPT Sun Jan 15 00:16:41 CST 2012 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e)
0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 07)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
config.gz:
http://codepad.org/XtUSbtdw
(Edit typo)
Last edited by cap_sensitive (2012-01-17 06:12:01)

This morning, I performed a system update and I did not see any errors with alsa when I rebooted. Audio hardware is:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Have you tried manually restarting alsa after the system boots up to see if you get the same error? You can restart alsa with the following command:
sudo /etc/rc.d/alsa force-restart
Post your results. If the error occurs during the manual restart, it should also include some details about what caused the error

CRM 5.0 - Error during Initial Load

Hi,
We have connected CRM 5.0 with ECC 5.0.
During initial load we are getting error in the outbound queue of ECC system as 'Name or Password incorrect (Repeat Logon)'.
Any idea, why is this happening. We have double checked the user id and password entered in SM59 is correct.
Thanks in advance,
Amit

Hi Michael,
Yes, I had checked on both the systems.
Anyways, the problem is now solved, it seems the BASIS team did some goofup while configuring the RFC destinations. It is working now.
Thanks for your help.
Cheers,
Amit

Sysfail error during initial load

Got sysfail error. Checked for shortdumps and found this
MESSAGE_TYPE_X     SAPLCRMO
'No external system (such as CRM) connected'
Checked the RFC. Seems ok. Any idea?
Get the parameters for the RFC conection.
    c_stshd-mass_queue = c_stshd-mass_data.
    PERFORM get_download_params_and_queue
            TABLES t_bapistructures
            USING c_stshd-objname
                  c_stshd-objclass
                  gv_destination
                  gv_rfc_queue
                  gv_server_release
                  i_bapicrmdh2
                  c_stshd-mass_queue
                  c_stshd
                  i_transfer_data
                  i_crmrfcpar
                  e_rfcoltp.
Set variables
    e_synchronous_call = gv_synchronous_call.
Raise an error if the destination of the foreign system could not be
found. (Only during Initial Load, Upload, Compare and Requests).
    IF gt_rfcdest[] IS INITIAL AND
       NOT i_bapicrmdh2-ref_id IS INITIAL.
      MESSAGE x050(c_) WITH
              'No external system (such as CRM) connected'(007).
    ELSE.
      t_rfcdest[] = gt_rfcdest[].
    ENDIF.

The RFC Destination for Replication & Realignment (Clt 000) isn't set because only the root admin has access to clnt000 and he's in vacation. Could that be the problem?

Errors during Data loads

Hi,
Our end users are preparing their scripts for UAT and I have been asked to provide a list of data errors which they might need to test during UAT.
Can someone please help me in this. This is very urgent!!!
Thanks,
RPK.
Message was edited by:
RPK

HI,
1.No IDocs could be sent to the SAP BW using RFC.
2.IDocs were found in the ALE inbox for Source System that are not
Updated. Processing is overdue
5.1st That it is a PC File Source System.
2nd - That there are Duplicate Data Records leading to error.
7.1st That it is a PC File Source System.
2nd For uploading data from the PC File it seems that the file was not kept at the application server & the job was scheduled in Background
8.The background processing was not finished in the source system.
It is possible that the background processing in the source system was terminated.System response .There are incomplete data packets present
9.After looking at all the above error messages we find that if we want to load data with the delta update you must first initialize the delta process.
10.Here we can see that the Activation of ODS has failed as the Request Status in the ODS may not be green.
13.While Fiscal year is mostly the financial year and varies depending upon the Client using which Fiscal year Variant. Client may consider April is the start month of year (financial) .So this can be achieved by defining the fiscal year.One client can have different fiscal year definations with different Fiscal varients.So Fiscal variants differ the starting and ending of fiscal year.
For example in India we follow Fiscal year from April to March. You can have a look at the Fiscal year Variant and the periods in transaction OB29
14.Due to space problem these types of errors occurs

Error during Initial Load

All:
I have Idm set up. I am trying to run the initial load (Use Case : SAP NW Portal). The datasource is a LDAP active directory server (Microsoft AD). I get the following error while running job.
XML and HTML version of the log do not show. Here is the "Text" version: ____________________________________________________________________________________
<mx:INFO>Temporary customer license. Contact SAP to get a perpetual license</mx:INFO>
<mx:INFO>CLASSPATH directory (E:\XIM\Identity Center\.) contains no class files.</mx:INFO>
<mx:INFO>License will expire on 30. June 2008</mx:INFO>
</mx:GENERAL>
<mx:PASSES>
<mx:PASS name="Job Initialization" title="Messages that occurred before the job was loaded" type="init" seq="0">
<mx:MESSAGES>
<WARNING seq="1">
<mx:TEXT>_Failed loading JDBC Driver class com.microsoft.jdbc.sqlserver.SQLServerDriver_</mx:TEXT>
<mx:TEXT>java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver</mx:TEXT>
</WARNING>
</mx:MESSAGES>
</mx:PASS>
<mx:PASS name="581C81F5-A703-4718-B063-E6A87DCD741A" title="ReadUsersFromLdap" type="Fromsource DSA" seq="1">
<mx:MESSAGES>
<mx:ERROR seq="1">
<mx:TEXT>fromDSA.doSearch got exception, returning false</mx:TEXT>
<mx:TEXT>javax.naming.AuthenticationException: [LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece
I have set the CLASSPATH environmental variable. C:\Program Files\Microsoft SQL Server 2005 JDBC Driver\sqljdbc_1.1\enu\sqljdbc.jar and made the entry in the Console -> Options -> Java Tab.
Why does it still keeping looking for it in the Installation Directory (E:\XIM\Identity Center\.)
Help Please.
Thanks
S.

All:
The error here was not because of the JDBC driver but an authentication error. Got past this by assigning "Domain Admin" role to the AD user used to connect to the Directory Server.
Thanks
S.

Error during data load due to special characters in source data

Hi Experts,
We are trying to load Billing data into the BW using the billing item datasource. It seems that there are some special characters in the source data. When the record with these characters is encountered, the request turns red and the package is not loaded even into the PSA. The error we get in the monitor is something like
'RECORD 5028: Contents from field **** cannot be converted into type CURR',
where the field **** is a key figure of type currency. We managed to identify the said record in RSA3 on the source system and found that one of the fields contains some invalid (special) characters that show up as squares in RSA3. The data in the rest of the fields, including the fields mentioned in the error looks correct.
Our source system is a non-unicode system wheras the BW system is unicode enabled. I figure that the data in the rest of the fields are getting misaligned due to the presence of the invalid characters in the above field. This was confirmed when we unassigned the field with the special characters from the transfer rules and removed the source field from the transfer structure. After doing this the data was loaded successfully and the request turned green.
Can anyone suggest a way to either filter out such invalid characters from the source data or make some settings in the BW systems such that the special characters are no longer invalid in the BW system? We cannot write code in the transfer rules because the data package does not even come into the PSA. Is there any other method to solve this problem?
Regards,
Ted

Hi Thad,
I was wondering, if system is unicode or non unicode that should not matter the amount and currency field . As currencies are defined by SAP and it is in pure English at least a currency code part of 3 Chars.
Could this because of some incosistency of data ??
I would like to know for Which currency had some special characters it it in that particular record ??
Hope that helps.
Regards
Mr Kapadia

Error during dimension load in planning using ODI adapter

I have created a Planning app in Classic and used ODI Planning adapter to load the dimension from a csv file. I tried this with Account and Entity dimension. Both fail at the same step. This is the error I get.
Error:
-22 : S0002 : java.sql.SQLException: Table not found: C$_0Entity in statement
java.sql.SQLException: Table not found: C$_0Entity in statement
at org.hsqldb.jdbc.jdbcUtil.throwError(Unknown Source)
at or
-22 : S0002 : java.sql.SQLException: Table not found: C$_0Account in statement
java.sql.SQLException: Table not found: C$_0Account in statement
I am following John Goodwin's blog and not sure if I am missing a step. I would appreciate any help with this.
Thanks

Thank you John for your respone. Here are the details:
Step 1 - Loading -SS_0 - Drop work table - It is failing in this step with the following message:
-22 : S0002 : java.sql.SQLException: Table not found: C$_0Account in statement [drop table "C$_0Account"]
java.sql.SQLException: Table not found: C$_0Account in statement [drop table "C$_0Account"]
Step 2, 3, 5 and 6 are successful
Step 7 - Integration - Interface name - Report Statistics - This fails with the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 2, in ?
Planning Writer Load Summary:
 Number of rows successfully processed: 0
 Number of rows rejected: 8
 at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
 at com.sunopsis.dwg.codeinterpretor.k.a(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(Unknown Source)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(Unknown Source)
 at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(Unknown Source)
 at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
 at com.sunopsis.dwg.cmd.e.i(Unknown Source)
 at com.sunopsis.dwg.cmd.h.y(Unknown Source)
 at com.sunopsis.dwg.cmd.e.run(Unknown Source)
 at java.lang.Thread.run(Thread.java:595)
I have checked the check box "Staging Area different from Traget" and selected "Sunopsis Memory Engine"
I would appreciate your help - Thanks

CCA install error during init database (@UseMe.sql)

when I init the oracle database use @UseMe.sql
It give following errors.
how to fix it?
25907 [main] INFO $Revision: 3 $ - Node list size [1]
25922 [main] INFO $Revision: 222 $ - Inserting the following language => italian
25938 [main] INFO $Revision: 3 $ - Node list size [1]
25985 [main] INFO $Revision: 222 $ - Inserting the following language => chinese
26032 [main] ERROR $Revision: 3 $ - Cannot parse the com/taw/data/chinese/localelanguages.xml file, something wrong in the xml, leaving
org.xml.sax.SAXParseException: Document root element is missing
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at com.taw.util.tawUtil.getNodeList(tawUtil.java:26)
at com.taw.work.LoadData.getNodeList(LoadData.java:1892)
at com.taw.work.LoadData.processLanguages(LoadData.java:2684)
at com.taw.work.LoadData.processSiebelLanguages(LoadData.java:1824)
at com.taw.work.LoadData.processSystemData(LoadData.java:1874)
at com.taw.work.LoadData.initVersionVariable(LoadData.java:297)
at com.taw.work.LoadData.testDatabaseConnection(LoadData.java:220)
at com.taw.work.LoadData.main(LoadData.java:2826)
Exception in thread "main" org.xml.sax.SAXParseException: ????????
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.fatal(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at com.taw.util.tawUtil.getNodeList(tawUtil.java:26)
at com.taw.work.LoadData.getNodeList(LoadData.java:1892)
at com.taw.work.LoadData.processLanguages(LoadData.java:2684)
at com.taw.work.LoadData.processSiebelLanguages(LoadData.java:1824)
at com.taw.work.LoadData.processSystemData(LoadData.java:1874)
at com.taw.work.LoadData.initVersionVariable(LoadData.java:297)
at com.taw.work.LoadData.testDatabaseConnection(LoadData.java:220)
at com.taw.work.LoadData.main(LoadData.java:2826)
Edited by: tigger on Mar 5, 2009 5:16 AM

upgrade to jdk 1.5 fixed

Error when inital load to cuble

we are in 3.5,
and I am doing a delta lode into a cube from ODS and it gives error says
"Incorrect records were discovered. The incorrect records could not be written into a PSA.
Time conversion from 0CALDAY to 0FISCPER (fiscal year K4) failed with value 13020601
Error 5 in the update"
Any idea? and how can I fix it.
Please advice me

your DSO has an incorrect CALDAY of 13020601 and there is an automatic conversion of CALDAY to FISCPER in your cube update rules .
Either delete this entry from the active data / change log of the DSO or correct the same and put necessary filters in the infopackage to load into cube.
Edited by: Arun Varadarajan on Feb 2, 2009 10:40 PM

Error during initial load of object SI_CONNOBJ

Hi All,
I am not able to do initial load of object SI_CONNOBJ from OLTP R/3 to CRM using transaction R3AS. It is in "Abort" Status. When I am checking the relevant Bdoc generated for the same it is giving me the error as "No data records in transport structure BAPIMTCS Message no. IBSSI_CRMTO_MESSAGES010 ". Please help me in this regard.

Hello Aishuman,
I am not sure what your question is. Yes, of course, you must have connection objects in the IS-U system. Otherwise, what do you want do download to CRM? You must have have the middleware in general and also the adapter SI_CONNOBJ enabled in the IS-U system. I am sure you know, that an IS-U connection object is represented as an IBASE in CRM.
Does a delta replication work (from IS-U to CRM and from CRM to IS-U)?
Kind regards,
Fritz

Error during Init loading

Similar Messages

Maybe you are looking for