Error during install 0MATERIAL from Business Content in BI 7.0

Hi,
We have a new BI 7.0 system, and I am in process of activating few InfoObjects. Many InfoObjects are activated successfully. I am facing problem with 0MATERIAL. I made multiple attempts. The error message is:
Table Type /BI0/WMMATERIAL could not be activated
Table Type /BI0/WPMATERIAL could not be activated
I am at BI 7.0 SP 18 and Business Content 7.3 SP 11
Please help.
Thanks.
~S

Hi,
Hopes this link will help u a little
Error in Installing 0MATERIAL.

Similar Messages

Error Installing 0MATERIAL from Business Content

Hi,
I am trying to install the infoObject 0MATERIAL from the business content. After the installation without any error, when I am trying to access the object I get the error: Settings for material number conversion not found
Could you please help me on this?
Many thanks
Antonino

Hi Antonino,
I had even worst problem: I couldn't open 0Material for maintenance. I made a search in a net and found the following:
Load from4.5 failing because of invalid trailing char in Material
In short I made the following:
Executed a report RSCC_V_TMCNV.
After that I was able to change conversion routine in 0material to ALPHA.
That's all.
Best regards,
Eugene

Activate 0AUBPVEH withOUT new version of 0MATERIAL from Business Content

Hello experts!
I want to activate ODS-Object 0AUBPVEH from Business Content. With this ODS I have to activate InfoObject 0AUVEHICLE which has 0MATERIAL as an attribute. Our experts told me, that it is not really possible to activate the ODS-Object with using our existing 0MATERIAL and without activation of the new version of 0MATERIAL.
Can someone help here?
Thanks,
Peter

We found now another way.
Regards,
Peter

Problem installing 0SALES_UNIT from Business Content

Dear Friends,
I have tried to install 0SALES_UNIT from the business content but it does not appear under the InfoObjects tab.
What could be the problem?
When i try to install it, the system shows that an active version of the object already exists. I have tried to install it inspite of the existing active version and also get a green signal. Thanks for all the help in advance.
Raj

Raj,
Here is the solution to this problem.
You have successfully activated the infoObject but do not see it under the infoObject list. This happens due to inconsistencies in the RSDIOBCIOBJ table. To solve this error, go to SE37 and execute the RSDG_IOBC_REORG function module. Put in the following parameters.
I_IOBJVERS -
> A
I_PROGRESS -
>
I_IOBJTP -
> *
I_ALL_IOBJ -
> X
I_T_IOBJNM -
>
I_BYPASS_BUFFER-->
Press F8 to execute.
Then go to RSA1 and you should find your infoObject.
Don't forget to assign points!!!
Abdul

Error in Query Activation from Business Content

Hi Gurus,
I'm having problems when I'm activating Query 0FIGL_VC1_Q0001 (Financial Statement and P&L: Actual/Actual Comparison) under Virtual Cube (0FIGL_VC1). Everytime I activate it, it displays these errors 1. Error when activating element 2GXNYXWAV1FOYLM46UJ2U2Q2D , 2. Error when activating element 2LOL3P78C15MAEBIFHL8MNR7R, etc.
Then when I look at the query elements, I noticed that not all elements (Structure, Formulas, etc) are activated and it displays this message "Is existentially required by : 0FIGL_VC1_Q0001 [ELEM]". Although when I search for the elements in the Business Content to activate them it seems that these elements do not exists. Please advice. Thank You.
- kit

Hi
Check if the Query : 0FIGL_VC1_Q0001 has all the Query Elemenst(Restricted Keyfigures, Calculated Keyfigures etc) have D version to install.
You can also check in the Source System if all the Query Elements corresponding to the Query are transported in D-version.
If something is missing do transport it agian.
Regards, Hyma

How to install ODS from Business Content

Hi,
I would like to know How to install ODS 0CFM_O01 from the Business Content?
Thanks in advance for your help.
Alex

Tcode RSA1
Click on Business Content tab on the left side or
use tcode RSORBCT
This would take u to the BI content area
Here click on Object Types
Change the settings on the right most screen according to your requirement
like voodi mentioned for grouping and install
then on the right find Datastore object Technical name ODSO
Click on the on it and hit select objects that appears underneath
A new window will appear here search for 0CFM_O01
and hit Transfer Selections.
Now your selection would appear on the right most column on the workbench
Hit on the check mark icon to activate the business content which is next to grouping and if it is faded try hitting the install button and select install from the list.
Hope this helps.
Good luck.
Raj

Can't create DTP for cube migrated from business content to 2004s

I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s.
Master data was not a problem, but Im having a hard time getting InfoCubes to migrate.
I installed 0PUR_C03 from Business Content and replicated the DataSource into the Data Warehouse.
I right-clicked 2LIS_02_S013, selected Additional Functions, then chose Transformation erzeugen (a.k.a. Create Transformation in English).
The transformation is generated with no errors and it was activated. The DataSource is migrated automatically in the process.
Then, I went to add the Data Transfer Process and that is where I got stuck.
I right-clicked the cube and took Create DTP. For source type, I selected datasource. A dialog box then shows the objects associated with the cube, including the converted infosource, but nothing is highlighted for me to choose from, and I cant complete the process of creating the DTP.
Can anyone tell me where I might have gone wrong?

u got it...
Message was edited by:
Raman
Message was edited by:
Raman

Installation of Datasource from Business content

Hi Friends,
While Installing Datasource from Business content in SAP R/3 encounter with following error message. Can some one guide me how to transfer the hierarchy with Business Content. Appreciate your help in resolving this problem.
Application component FI-GL of DataSource 0FI_TX_4 does not exist
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component FI-GL. This application component is, however, not entered in the RODSAPPL table as an application component.
System Response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Procedure
You do not have the option yet to transfer the application component hierarchy from the Content.
You transfer the hierarchy with Business Content.
Thanks & Best regards
Pravin

Sorry if a year has gone by.
This is because you didn't heve the Application Component Hierarchy installed in BW itself. Use rsa6 to do this, in the BW system (not the other source system. Be careful if you have already somehting there, because it will override the hierarchy with the Business Content hierarchy.
If you need to transport the active hierarchy, and not reinstall all the Business Content Datasources, the object is :
R3TR DSAA APCO_MERGED
So, create a workbench transport, and add the above object.

Activate Update Rules from Business Content

Hello,
I am trying to install 0QM_C10 from business content. Every thing works fine except there are no update rules (there are 3 info sources for this cube). I am new to this and it doesn't make sense for me to manually create (ofcourse the system does the proposal) update rules. Since that is lot of work. I was expecting some transaction / tool where I can activate the update rules from the Business Content (since I can see the update rules in the business content under "Display Description". Is there any tool like that?
Or, am I doing some thing wrong so the update rules are not automatically installed from the business content along with Cube and info sources?
Note: I did separate installation for cubes as well as info sources from business content using Grouping by "Only necessary objects" option.
Thanks in advance.
Bala
Message was edited by: Bala Lingamaneni
Message was edited by: Bala Lingamaneni

Bala,
please don't uncheck the checkbox that you find when you open a new thread (let it as default!)...this is the only way to be able to assign points to your helper !
Write a request (as a normal post) into SDN Suggestion forum in which you ask to Marc Bernard or Mark Finnern to convert this post as question !
Bye,
Roberto

Error in installing process chain from Business Content.

Dear Experts,
I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
<b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
Thanks in advance.
Regards,
NJ

ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
try this
Aravindan pagadala
satyam

Error on installing infoobject catalog from business content

while performing Install from Administrator Workbench:Business Content I am getting error.
I am trying to install Infoobject catalog 0MMIC_CHA01 and 0MMIC_KYF01 from business content
The error messages appearing are as follows:
Installation (simulation mode) of: InfoObject (IOBJ)
Checking Objects with Type InfoObject
Checking InfoObject 0BPARTNER
Char. 0LEGALFORM is exclusively an attribute (cannot be a navigation attribute)
Checking InfoObject 0CM_CDT1
Char. 0CM_HIEID may not appear in compounding and attributes simultaneously
Characteristic 0CM_CDT1 is used as Navigation Attribute of 0RT_SEAROLL, but characteristic
IInstallation (simulation mode) of: ODS Object (ODSO)
Installation (simulation mode) of: Update Rules (UPDR)

Hi
It seems although's are warnings and not errors. Instead of using Simulation just install the content.
check out the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89?QuickLink=index&overridelayout=true
Regards,
Venkatesh

Problem while installing a query from Business Content

Hi all of you,
I am trying to install this particular query Inventory Turnover from the cube 0IC_C03 (Material/Stock Movements) from Business Content. Now in the third pane in Business Content under Active version available column across the name of this cube there is a calendar symbol.
a.     So does it mean that the cube 0IC_C03 (Material/Stock Movements) is installed along with all the objects that are dependent on the cube and all those objects on which the cube is dependent. (NOTE: I had selected the grouping option as In data flow afterwars)
b.     When I collapse Query Element I find that some of the queries are not installed. So I expanded Inventory Turnover query, right clicked on it and selected Install All Below.
c.     I am getting this error, Abort system error in program SAPLRRI2 and form LI_SETZEN-01- when I execute the query Inventory Turnover. However in Business Content when I installed the report Inventory Turnover under the cube Material Stock/Movement I didnt get any error anywhere. Everything was activated successfully without any errors.
Please tell me how do I install this Inventory Turnover from business content and how do I execute this report from BEx.
Thank you.
TR.

Hi Arun,
Thank you for that quick reply. I want to activate only the query and not the cube. I did as you advise me but still I am getting the same error when I run the Inventory turnover report from BEx.
I am able to run other reports from the cube IC_C03. But not this report Inventory turnover. I have also checked the cube and there is data in the cube.
Kindly adivse what to do.
Thank you.
TR.

Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

Hello Friends,
I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
Could you share some of your rich experience and possible resolution. Thanks for your help.
Gabeesh Mishra
[email protected]

Friends,
Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
I am communicating with Basis Team and they are aware of this problem.
In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
Thanks,

Update rules not getting installed from business content.

Hello,
One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
So i dont know how to get these update rules working.
Please advice,
Thanks

Hi Mukund,
please see also the answer that I provided to your thread
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
In addtion, you might want to check
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
and the online documentation for more general information about data modeling / acquisition.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Install Info Object 0BSTAT from business content

Hi Guys,
I am trying to install info object 0BSTAT from business content , i have selected the options
grouing "only necessary obects" "start automaticall" "Hierarchy" ad dragged info obect from left side into collected objects and selected the install and trasport option form Install, assigned the trasnport also, it didn't give any errpor message but info object is not getting activated.
An body had the expericence with this issue, please share you ideas how to fix the issue.
Thanks
Best regards
Shekar Gunda

Thanks for your reply Matrin.
I looked at the log
Log is:
Installation of: Onfo Object (IOBJ)
You onl have authroization to display info object 0BSTAT
Transfer/Merge of the content version (Object Type Infoobject)
Activation of obects with type Info Obect
Saving Objects with type Infoobject
Transferring the 1 objects from type IOBJ took 0.4 seconds
Post-Processing of objects after activation
The post-processing lasts 0.0 seconds
Object IOBJ 0BSTAT was written to order/task EWD*******
You onl have authroization to display info object 0BSTAT
I looked at the SU53 also there is one error message related to info object BSTAT
Currently aunthorization Field ACTVT Activit is "23"
Does this mean i don't have autorization to install of info obects, do wee need any special activity is required in the for installing info object
Please suggest me how to proceed.
Thanks
Best regards
SG

Error during install 0MATERIAL from Business Content in BI 7.0

Similar Messages

Maybe you are looking for