Error during installing BOXI-R2 on Windows 64 Bit with Oracle.

I am facing these issues while installing BOXI-R2 :
Environment:
OS: MS Windows XP Professional x64 Edition Version 2003 u2013 Service Pack 2
Oracle: 10.2.0.1.0 64 bit for Windows XP
BO: BOXI-R2 Service Pack 4 - Server Installation with Tomcat. CMS & Audit databases on Oracle.
Analysis u2013 MS SQL Server 2000 u2013 Analysis Services
Errors:
1. The BOXI-R2 installation goes through, but the CMS is unable to connect to the database on Oracle. The error is given below.
Note:
I searched for a 64 bit version of BOXI-R2 installer on SAP Support website but couldnu2019t locate one.
Appreciate any help in this regard. Thanks a ton for reading and replying.
- Steve
Event Type:     Error
Event Source:     BusinessObjects_CMS
Event Category:     Services
Event ID:     35101
Date:          30/06/2009
Time:          10:54:54
User:          N/A
Computer:     LEPUS
Description:
The root server reported an error Initialization Failure. (Reason: The database subsystem could not be loaded. Make sure that the database client is installed. The message returned was The library named OracleDatabaseSubSystem could not be loaded. The system error message is Loading shared object failed. First tried to load library OracleDatabaseSubSystem and failed because of error: [The root server reported an error Initialization Failure.
Second tried to load library OracleDatabaseSubSystem.dll and failed because of error: [The operation completed successfully.
]..). is not a valid Win32 application.

Hello Steve,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

Import ABAP error during ECC 6.0 installation on Win2003 with Oracle

Dear friends,
I am trying to install ECC 6.0 IDES version on Windows 2003 server with oracle 10g. In fact I had tried few days before and I was getting the same error message. I had posted a separate thread for this and after few suggestions I have moved the sorce data to internald HDD which was earlier on external HDD. Secondly the page file only 4096MB and now I have changed it to 24GB. But still it is giving errors. Only thing is that I have changed the page file size after istalling Oracle, will this effect installation? or is this because of any files corrupted source HDD?
Kindly help me to solve this problem. I would be very much thankful to you. Here I am attaching DOKCLU.log; PCL2.log; sapinst.log; and import_monitor.java.log.
Please let me know if you need any further information.
- Ravinder.
============================================
Error log from DOKCLU.log is as below:
++++++++++++++++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: DOKCLU created #20101202103735
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\DOKCLU.001"
current table was "DOKCLU"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
Error log from PCL2.log
+++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i PCL2.cmd -dbcodepage 4103 -l PCL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: PCL2 created #20101202103740
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\PCL2.001"
current table was "PCL2"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
log from import_monitor.java.log
+++++++++++++++++++++++
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 1, waiting 2, completed 40, failed 16, total 59.
Import Monitor jobs: running 2, waiting 1, completed 40, failed 16, total 59.
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 41, failed 16, total 59.
Loading of 'SAPAPPL0_10' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 42, failed 16, total 59.
============================================
log from sapinst.log
+++++++++++++++
Import Monitor jobs: running 2, waiting 9, completed 32, failed 16, total 59.
Import Monitor jobs: running 3, waiting 8, completed 32, failed 16, total 59.
Loading of 'SAPSSEXC_1' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 33, failed 16, total 59.
Import Monitor jobs: running 3, waiting 7, completed 33, failed 16, total 59.
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running ...
ERROR 2010-12-03 05:43:19
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-12-03 05:43:19
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .

Hi Rahul,
Thanks for your valuable inputs, but when tried giving the below sqlplus command it is asking for user name and password and there I got stuck. Could you please let me know what is the default user and password or is there anyway we can skip it?
Resolution
stop the all oracle services.all r automatic mode.
restart the system
==> When we restart system again all the automatic oracle services starts right, do we need to stop them again before executing the below command?
login through
goto command promt and type
sqlplus "/as sysdba"
==> after this command it is asking for user name and password
sql> startup
exit
c:---->lsnrctl (I do not understand this command, is it at C prompt or at SQL prompt?
lsnrctl>status (also do not understand how to give this command)
(look for the following message)
The command completed successfully
exit
now u start the installation.
Kindly help, it would be great if you could me your contact details, I will not disturb you but just in case of any help. Thanks once again. - Ravi.

Java gets error pki-02002 accessing wallet on windows 2008 with Oracle 12 only

I have a windows 2008 server with Oracle 12 client installed and I can't figure out what is preventing me from running java commands that use the wallet. The wallet itself seems to be fine as I can log in with SQLPLUS using the wallet, it is only when I try to run a java command that it fails with a PKI-02002 error.
Also - I can run the same command line without error with oracle 11 installed, so it seems to be something that differs between oracle 11 and 12. Any ideas of what I should look for? I've checked permissions on
Here is the error:
java.sql.SQLException: encountered a problem with the Secret Store. Check the wallet location for the presence of an open wallet (cwallet.sso) and ensure that this wallet contains the correct credentials using the mkstore utility: java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
at oracle.jdbc.driver.PhysicalConnection.getSecretStoreCredentials(PhysicalConnection.java:3048)
Exiting program...

Hi,
I am having exactly the same problem. Did you ever come to a resolution on this problem???
Thanks,
Darren

Error during install J2EE 5 in Windows XP SP2 Chinese Version

When I am installing J2EE or Sun Java System Application Server Platform Edition 8.2
It said Installation fail and following error logged in a
There is a error came out: Install_Application_Server9PE_200605312206.log
ERROR - default domain creation returned following exception: abnormal subprocess termination: Detailed Message:'@' 不是內部或外部命令、
可執行的程式或批次檔。
But I seems can install other compontent after the error.
but then I cannot open server when use.
The full log file is :
INFO - Start Sun Java System Message Queue configuration
INFO - End Sun Java System Message Queue configuration
INFO - unpacked jar file: F:\Sun\AppServer\lib\appserv-ext.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\javaee.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\admin-cli.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\appserv-deployment-client.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\appserv-cmp.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\appserv-jstl.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\appserv-tags.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\appserv-ws.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\com-sun-commons-launcher.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\j2ee-svc.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\sun-appserv-ant.jar.pack.gz
INFO - unpacked jar file: F:\Sun\AppServer\lib\deployment\sun-as-jsr88-dm.jar.pack.gz
INFO - Start core server configuration.
ERROR - default domain creation returned following exception: abnormal subprocess termination: Detailed Message:'@' 不是內部或外部命令、
可執行的程式或批次檔。
'@' ???O???????~???R?O?B
?i�??????{????�???��?C
INFO - End core server configuration.
INFO - Start samples configuration.
INFO - End samples configuration.
INFO - Start Java EE 5 samples configuration.
INFO - End Java EE 5 samples configuration.
INFO - Start Java DB Configuration.
INFO - End Java DB Configuration.

I try.... but my English is not really good so may be not exactly correct.
不是內部或外部命令、 ;
可執行的程式或批次檔 ;。
English:
Is not a internal or external Script;
executable Application or Batch File.
Message was edited by:
felix1000aa

Issues installing 10g ODAC on Windows 2008 with Oracle 10g Express

I am new to Oracle and am having an issue installing Oracle Data Access Components on Oracle 10g 64bit running on Windows 2008 64bit.
I need the ODAC installed to enable integration with SSIS.
The issue I have if i install using ODAC10203x64 the setup file fails with a javaw error and the ntdll.dll.
I then downloaded the ODAC1110720 which states it backwards compatible. It installs just fine, but now i am not sure as to how to configure it correctly as the Configuration util that loads in ODAC10203x64 does not run.
The ODBC drivers are not visible under the ODBC connection manager although this may be an issue of just opening the 32Bit version.
Any help would be appreciated

Hi Ibrahim,
You should decide what you require.
32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
The "problem" is that you would not gain any performance benefit from the 64bit server
If you want to have benefit you can upgrade the JVM to 64 bit version.
I did this 3 years ago and I do not remember exact steps though everything worked OK.
WARNING:
this can be unsupported, ask support to be sure
- Install the 32 bit version on the server
- Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
- later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
try to search the forum, there had been a thread with the same question
regards, michael
Edited by: MickleSh on Sep 27, 2011 9:59 AM

OMS error during install Grid control 10gR2 on Windows 2003

He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanks

There are some guidelines here:
Subject:      OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
     Doc ID:      Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
     Doc ID:      Note:358640.1
~ Madrid.

WRT160N error during install

I just purchased WRT160N and during the install of LELA there is an error. " Linksys Updater failed to start- verify you have sufficient privileges to start system services" pops up during install. Then it asks to retry and it hasn't worked or close window. Then when says this "Setup for Linksys Advisor has failed "Fatal Error During Install" please check your settings and try again.
Help! I am not computer savy, and don't want to start changing anything and screw it up.
Internet is working on the installed computer (I believe this is called the gateway? not wireless uses the ethernet cable)but I can't setup my wife's new laptop til this is fixed.
BTW this is a cable modem hook up if that makes a difference. I have tried restarting, turning power off as well but still get the same problem every time.
Thanks,
Don

As you have mentioned that your Hardwired computer is able to go online throught the router, and now you are trying to setup your wireless computer. You dont have to run the setup disk on your computer, you can configure all the settings on your Router manually and then make your Wife's computer go online wirelessly..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Solution for Power Saver error during install

Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]

Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye

Quicktime errors during install, uninstall, or run

Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Getting error while installing BI publisher desktop 64 bit

Hi ,
I'm getting the following error while installing BI publisher desktop 64 bit.
"Please use BI Publisher Desktop installer 32 bit"
My Machine OS is : Windows 7 , 64 bit.
If I go with BI publisher desktop 32 bit, I'm not getting the "BI Publisher" tab in Microsoft Word. (MS word version : 2010) .
Kindly help to solve the installation issue.
Regards,
Vanitha

Hello Vanitha,
After you install BI Publisher Desktop 32bit, you are not seeing the BIP ribbon on MS Word but can you see the BI Publisher Add-In
in Word Options > Add-Ins > Inactive Applications Add-Ins?
Bogdan

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

Errors During Instalation Of Final Cut Studio 5.1

Aloha,
I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
Can anyone help Please!!!!!!

I would take a different approach.
I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
Best way to do it, in my view.

FCP error during install.

I keep getting an error after installing FCP 5.1.1.
It says error during install please try again.
Im using 10.4.7 on my ibook 1ghz 640mb ram.
I know it will work because a friend has installed it on his.
Any one help?

This most often caused by a damaged or otherwise faulty disk in the package. It happens. Try cleaning the disks and then get out your receipt and serial number because your only recourse will be to call Apple for a replacement.
bogiesan

Getting error 2349 installing itunes on vista 64-bit. Please help!

getting error 2349 installing itunes on vista 64-bit. Please help!

I've been having the same issue for the past few months. Try this http://support.apple.com/kb/HT1926
go through each step of the general installation troubleshooting completely then restart your computer and try to install it again. It worked for me on the first try so hopefully this helps!

Error during installing BOXI-R2 on Windows 64 Bit with Oracle.

Similar Messages

Maybe you are looking for