Error during Intel Management Engine Firmware 7.1 for Windows 8 installation on X1C.
Update error:
Version detecting error:
It seems that first applying the Firmware update before imaging has resolved the issue.
Similar Messages
-
W 530 Intel Management Engine Firmware
ThinkPad W530 2436CTO Core(TM) i7 3920XM running Windows 8.1(64-bit), BIOS G5ETA2WW(2.62),
I have installed Intel Management Engine 10.0 Software10.038.1026 which resulted 10.030.1054, so fare so good.
Tryed to install Intel Management Engine Firmware 8.1.60.1560 found on Lenovo site, not possible, why? It was the meaning to update the installed version 8.0.12.1498.
I get the message when trying " 'FWUpdLcl.exe' is not recognized as en internal or external command"
As I understand it, the updated version should fit my w530?
ebbemaHi bondpham,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime: HP EliteBook 8470p Notebook PC Support.
I hope this helps, good luck!
I worked on behalf of HP. -
Intel Management Engine Info conflict on T530 with Windows 7
I have updated Intel Management Engine Firmware to version 8.1.20.1336 a few months back. Now looking at the info by running MEInfoWin.exe from Command Prompt, I get this:
BIOS Version:_______xxxxxxWW (x.xx )
MEBx Version:_______8.0.0.0066
Gbe Version:________1.3
VendorID:__________8086
PCH Version:_______4
FW Version:________8.1.20.1336
UNS Version:_______8.0.3.1427
LMS Version:_______8.0.3.1427
MEI Driver Version:___8.0.0.1262
According to the readme file, the UNS, LMS and MEI Driver versions should all be higher (e.g. 8.1.20). How do I update these last 3 versions?usually i go for the newer version.
and on my thinkpad i installed power management driver version 1.66
and for ime firmware the second link you provided.
good luck -
Chipset display network adaptor blutooth intel management engine interface card reader
plesse provide a link for download chipset
display
network adaptor
blutooth
intel management engine interface
card reader
for hp notebookHi:
What is the full model number of your notebook and what operating system are you running on it?
Also is it a 32 or 64 bit operating system.
There are thousands of HP notebooks, and no one can help you with the lack of information you have provided. -
H77MA-G43 3570k Intel Management Engine Driver error
Hi guys!
i've got the following problem.
every time i run controlcenter o biosclick ii i get the following error:
please install intel me8 driver to enable cpu overclock
so as a responsible person i went to my motherboard drivers page and got the
Intel Management Engine Driver files
i run it and then i get this error:
this computer does not meet the miminum requirements for installing the software
i checked and i have .net framework 4 installed but now im stuck... any ideas? i want this error gone :(
edit:
did what the sticky said
https://forum-en.msi.com/index.php?topic=163549.msg1198800#msg1198800
Use M-Flash with ME the MSI recommended way, but one that seems prone to bricking one of your bios's
tried reinstalling the driver... no goim running win7 64
i installed it from this link
http://www.msi.com/product/mb/H77MA-G43.html#/?div=Driver&os=Win7%2064
which says it supports the following OS
Win8 32, Win8 64, Win7 64, Win7 32, Vista 64, Vista 32, XP 64, XP 32
im at a loss :S -
Intel management engine interface error
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10)
using original driver version: 6.0.0.1179, running OS system 7 home premium, 64 bit. Pavilion slimline s5570t
Trying to understand if this is causing long startup, sleep mode not working, power down does not complete. Have tried disabling all unneeded startup and services to no avail.
Upgrading to Service Pack 1 caused failure to boot, continuous beep. restored to previous point.
Thank you very much for your help.I need some specific information about your computer before I can tell you exactly what to do.
Please download and install Speccy. Once that is done, then start it up. Once it is done analyzing, click on File and then on Save Snapshot. Save the snapshot to your desktop and then right click on it and select Send To and then Compressed (Zipped) Folder. I will send you a PM on what to do with the file. DO NOT attach it or post it here.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com -
Intel Management Engine Interface problem.
Hi evryone, i have problem with Intel Management Engine Interface on my laptop HP Elitebook 8470p, I did:
- Install driver for MEI by Drivers, Software and Firmware for HP EliteBook ...
- Update new bios by Drivers, Software and Firmware for HP EliteBook ...
But when i open Device Manager , Intel Manager Engine Interface cannot start (error code 10)
- When i restart then open Device Manger, device MEI have not list in Device Manager.
But when I shut down and turn on laptop, device MEI list in Device Manager with error code 10.
Any body can help me? Thanks.Hi bondpham,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since the {insert product model} is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime: HP EliteBook 8470p Notebook PC Support.
I hope this helps, good luck!
I worked on behalf of HP. -
Cannot install Intel Management Engine Interface (Rapid Start)
Hello,
after setting up a totally new system after scratch I cannot install the
LENOVO Intel Management Engine Interface. (from the support page). During install the setup stops.
Error message (in german): "setup program couldn`t start at least one application process"
Waht can I do?
Any hint?
I want to get the Hibernate working...hi Ralph1,
thanks for posting I'm really sorry to hear about the issues your're facing with your machine. I understand how frusting this can be.
Just to get a clearer understanding of the issue, the machine that you are trying to update is for the U410 is that correct? If that is the machine you are trying to update. If you are trying to update the U410 IME. please click on the link below.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028767
hope this helps,
Do let us know how it goes.
regards -
Intel Management Engine Interface Status Device Power Failure
Dear community, Recently I noticed that my Intel Management Engine Interface is not working and show the STATUS_DEVICE_POWER_FAILURE error. My computer is a Lenovo Yoga 2 prowith Windows 8.1 latest Windows update and fresh installMy BIOS has laster firmware 76CN43WWI've installed the laster Intel MEI driver 9.5.15.1730 and the latest Intel chipset driver 10.0.27 Please someone help me to find a solution. Best regards
Have the same problem and it stops me from upgrading to windows 10. Found a solution?
-
hi Tec,
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
Issue: my computer auto restart after 2 hours please resolved the issue
Logs captured from System summary:
[Problem Devices]
Device PNP Device ID Error Code
Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0 this device cannot start.
Cisco Systems VPN Adapter for 64-bit Windows ROOT\NET\0000 This device is disabled.Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I have a laptop refresh project strating soon and i can not deploy any X220 machines.
After the installation of Windows 7 there is an "Unknown device" shown in device manager.
If I uninstall the unknown device then "Scan hardware changes" the device changes to PCI Simple Communications Controller but with an ! and a message that the driver failed to install. The driver shows an Intel driver version 7.0.0.1144
If i reboot the system the driver no longer shows the ! and looks to have isntalled successfully.
I also tried to run "Intel AMT 7.1 Management Engine Firmware for Windows 7 (32-bit, 64-bit)" but recieve "The setup program failed to install one of more device drivers. Setup will exit."
Any help would be really appreciated...
Solved!
Go to Solution.It seems that first applying the Firmware update before imaging has resolved the issue.
-
Unable to install Intel Management Engine Interface
http://support.toshiba.com/support/viewContentDetail?contentId=4007230 When I try to install it, a box pops up and says ERROR Do Not Support This Platform. I have a Toshiba Satellite C855-S5234
I also have the same issue. I have a TOSHIBA Satellite C855-S5206 running Win 7 64-bit.I ignored the update months ago in TOSHIBA Service Station after I tried to install it and it gave a popup "ERROR: Do not support this platform." But today TOSHIBA Service Station asked to install it again. I tried but same popup error.I went to the support page for my laptop and it lists this as a required update (same update as listed on TOSHIBA Service Station):Intel Management Engine Interface Posted Date: 2015-03-20 | Version: V9.5.24.1790 | Size: 70.13M I downloaded and tried to install the exe file and it still gives a popup "ERROR: Do not support this platform."The update is for the series 7 chipset but I'm also running the series 3. Has anyone resolved this??
-
Which ME (Intel Management Engine) version do I have?
Where can you check which ME (Intel Management Engine) version* you currently have?
*Firmware versionQuote from: msiforever on 27-November-14, 17:43:28
7.0 or 7.1?
I'm trying to figure out if I can install the Intel Management Engine Driver 7.1.52.1176. You have to have ME 7.1 firmware for that according to my MB download page*.
I've currently got ME driver 7.0.0.1144. Doesn't that suggest I have Intel ME 7.0 firmware as well?
*http://www.msi.com/support/mb/P67AGD65_B3.html#down-driver&Win7 64
Quote from: msiforever on 27-November-14, 17:43:28
7.0 or 7.1?
7.0.4.1197
Quote
I'm trying to figure out if I can install the Intel Management Engine Driver 7.1.52.1176
Yes, you can
Quote
You have to have ME 7.1 firmware for that according to my MB download page*.
no, ME driver versions are different the ME firmware versions, but need to be the same main base, ie 7.xx -
Z87 gd65 Intel Management Engine Driver fails to install.
The Intel Management Engine Driver from the MSI z87-gd65 website did not install correctly.
I was updating some drivers here and there and noticed a newer version of the MEI had been released. The installation procedure came back with a nasty error, and a pesky exclamation point showed up in my device manager. I was able to install the newest version (10.0.0.1204) by googling for Management Engine Interface and downloading directly from microsoft, but I would have preferred to use the file on the MSI site, as I believe the one I used was intended for another motherboard.
This is the driver I ended up installing, which worked correctly.
Was anyone else having problems updating the management engine driver?
z87-gd65
4770k (stock)
16g ddr3
250gb ssdThere is nothing wrong with downloading from Intel's page. It's them providing the driver anyway, and MSI just used it on their product page to make it easier to find; there's no specific driver of Intel ME for specific motherboard or setup. So you're fine.
-
Intel Management Engine Interface
[Thinkstation E30 7824-B1G]
Intel Management Engine Interface in Device Manager window shows a yellow mark on the left side: (error 10) it's impossible to start the device. I tried to install a new driver from this webpage http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014017 but the problem is still present. any solution?Try the solution offered in this Microsoft Solution article and see if it resolves the problem. The solution offered is for Windows 7, but it should work with Windows 8 as well.....
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-fix-intelr-management-eng...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.
Maybe you are looking for
-
RH6 crashes with th and conditional build tags
Hello together, The attached code worked fine with RH X5, but leads to a crash with X6. To fix, you have to replace the <th> by <td>, but it is not too easy to find the topic within a project. The fix is quite easy, but it is hard to find in a big pr
-
Can I use a PowerPC iMac as a monitor for my MacBook Pro?
I have an early 2011 MacBook Pro running Mountain Lion. I need an external monitor for it and have an old iMac laying around that I'm wondering if I could use. The iMac is the first gen white square all-in-one screen one. It's a G5, 20" 1.8 GHz from
-
Do i need another Virtual machine rather than sharepoint server to install workflow manager ?
Hi , I have installed sharepoint 2013 on a single server with a built-in-database. And i have installed OWA in another virtual machine. Now i am trying to create a workflow. I have downloaded and installed sharepoint designer and workflow manage
-
I want to move an object throughout the whole animation, how can I do that?
-
How to create a chart with parameter ?
hello, i would like to know if we can create a form with some parameter to fill, and when you submit, you can create a chart. Nowadays, we can create a chart with the assistant, but can we create a chart without it ?