Error during invoice sending by Email
Hi gurus,
During Invoice creation , we are sending an email to a
customer with Transmission medium 5 external send.
But during invoice saving getting error as
No address exists
Error while copying recipient object
Specify at least one recipient
Please give your inputs .
Thanks
Hi
Also check while address maintained for the customer, E-mail ID is maintained or not.
E-mail setting configurations from BASIS people also need to be rechecked.
Best Regards
SRI
Similar Messages
-
I get a error when I send a Email. Recipient "email@address" was rejected by server by sever
I set up my email the way the phone and iPad do. Very simple. It works most the time, but I am usually on wifi also. I ran into problem saying email was rejected by server, and it put email in my outbox. I looked in here to see if anyone had a good solution, then realized after reading the post I never actually checked my servers. My actual servers were different than the defaults that were set up. Example : the default server was mail.roadrunner.com, but the actual should be pop-server.roadrunner.com, and same for the smpt-server.roadrunner.com. Based on the ISP, must have the correct servers. But I was always able to send while on wifi. That part I did not understand. But since I fixed the servers, I have not seen any problem sending on either the iPad or iPhone. If you have not found fix, hope this may help if still having problem
-
Getting Error during Invoicing
Hi Experts,
I am getting error of an account during invoicing.I have tried to invoice of the Electric billing document in T code EA19.
I am not understanding why it is fetched Gas division business area where I am trying to invoice of only Electric.
Your help is appropriated.I am stucked in my work.Response to: [email protected]
error: Invoicing error: 9D0000700006 ORD belong to business area D020 not D030’
Thanks,
Mandira
[email protected]Hi,
First of all, check and see if the reconciliation account is not blocked for posting in FI, use transaction FS00 for this.
If you don't get a reconciliation account with this error, you must determine what main transaction is used for invoicing and check if the account determination is correct using transaction EK01. You must make sure that the combination of company code, division, account determination ID and main transaction gives you the correct reconciliation account.
Please let me know if this helped or provide some additional information about the error.
Bogdan -
"RFC 2822" error message when sending group emails
I periodically send bulk emails to groups from my AddressBook, and have done so w/o glitches for years. Suddenly, I'm getting this weird error message: "Message does not conform to RFC 2822 standard". Earthlink tech support was unable to figure it out. Mac tech support said to cut down the number of contacts in my groups. Tried that. No go. I see others here have run into this. I tried the "BCC" workaround that some kind soul posted a few months back (Add the desired AddressBook group to the BCC field instead of the "To" field.). This did work (thank you, kind soul!), but it seems like a provisional solution. Has Mac or anybody else figured out what this RFC thing is all about and how to fix it for good?
Any help would be much appreciated.
MacBook Mac OS X (10.4.8)When you put the group in the BCC: field, are you also putting at least one address (usually your own) in the To: field?
I would also make sure that there are no typos, and especially no spaces, in all the email addresses.
Power Mac G5 1.8GHz DP, 1.5GB RAM Mac OS X (10.4.8) -
Office 365 - Outlook error message when sending an email
Error Message: "The operation failed. The message interfaces have returned an unknown error. If the problem persists restart Outlook." By simply recreating a new email with the same message I am able to send. In most cases there are a lot of
attachments that I must search for because I cannot copy & paste attachments from the old email to the new. I have other goofy problems with Outlook but want to deal with this first as it is very time consuming rebuilding these emails.Hi,
Please create a new Outlook profile for your account to check whether the issue persists. If it works well in the new profile. The issue should be caused by Outlook Data Files corrupting. To create a new Outlook profile, please refer to:
http://support.microsoft.com/kb/829918/en-us
If the issue continues in new profile, please restart Outlook in safe mode(Start > Run > Outlook /safe) to check whether the issue is caused by any third-party add-ins.
Regards,
Winnie Liang
TechNet Community Support -
None of my emails are being sent. I'm getting an error about my smt address being incorrect but I don't know how to correct it or why it's suddenly wrong. This started about 3 weeks ago but I just realized it today. Can anyone help me figure this out?
Contact your service provider.
I have Verizon FiOS service and this month, Verizon migrated their service over to a more secure service that uses SSL and different port numbers. As a result, the old mail configuration became obsolete and if it's not changed gives the same error that you are describing. Verizon's customer support page notes the changes (and they've been sending out e-mails). -
MIRO error during invoice posting
Hi,
when I post an invoice document with MIRO, the system prompts with the following error:
Account type K is not defined for document type RE
Message no. F5243
How can I post the invoice ?
Best regardshi,
GO to OBA7 ....select the document type and select detail and select customer check box under account type allowed data.......
Hope it helps...
Regards
Priyanka.P -
Dear All
While doing invoice system is telling cost centre not belongs bussiness area 9012.I checked the assignment in OKENN it is found to be OK.
Regards
Srinivasan.P
Edited by: srinivasan ponnurangam on Apr 25, 2009 10:40 AMHi Srinivasan
First of all check in OKKP wheather cost center has been checked or not. So check in KS03 wheather the cost center has been assigned to business area 9012 or not. If not assigned then assign it and then save the billing document and check wheather it has been forwarded to FI or not
Regards
Srinath -
Error during invoice verification
We have created a PO and made a GR against the same, When we start entering the IV for this PO, i.e we enter the PO no in the reference field, then the whole screen gets blank (with only dashes in the field of date, amount, refernce, etc etc), with the error stating "GL account not maintained in Chart of Accounts 1000", we checked for the account in t-code FSP0.
cant attach the screenshot here, but hope You sirs get the point.Hi All,
I am working in the Production client, also the company code I am working in is also right, have checked that.
Also checked the the G/L accounts specified in PO account assignment tab, Reconciliation account no, the tax code is 00 ie no tax is applicable, only withholding tax is applicable, so checked that too. the GL account mentioned there has also been checked by me and it has also been configured properly.
Any other ideas or transactions where I can check.
I couldnt attach my screenshot here, is there any way to do that?
Thanks
Ankush -
Getting errors when sending/receiving email
Hi there I have only just updated to Windows 10 from 8.1 nd am able to receive mails On outlook 2013 but continually get the following error message
Task '[email protected] - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' I have tried everything but cant get it fixed can someone help Thanks BryanSame thing here Fresh install of windows 10 and Outlook 2013 Receiving emails but getting the same error message when sending and emails stuck in Outbox. Tried all available options in account settings but it doesnt make any difference. Strangley enough though when initially setting up the mail account it sends its test email no problems. Installed Outlook 2010 to see if there was any difference but the same thing happens.
-
Transfer posting during invoicing
Hi Experts,
Please refer the spreadsheet enclosed for your reference. I would like to add that we are using India localization in our project.
Issues:
During Invoice posting the system is forcing us to maintain GL account determination for main transaction 0250
In case Late payment charges in previous invoice is paid/cleared – no issues (Inv # :9100001584 Doc#: 10000002837 Dt:05-08-2013 Amount: 9.53)
In case Late payment charges in previous invoice is open then system automatically clears the past late payment charge using main/sub 0620/0010 and posts the same as Rec. Transf. Posting Invoicing using main transaction 0250/0020.
Is there any way to stop this as its unnecessarily creating additional line items. Please advise.
Thanks & Regards
Satyajeet GhoshHi Satyajeet,
Please refer to the below responses-
(A) Main Transaction 0250- I think you have to maintain the relevant entries in EK01 and EK02.
Please refer to the below link which also discusses the same issue
Account determination error during invoicing for internal main transaction 0250
(B) Rec.Transfer posting during invoicing- I think you are calculating the late payment charges for the Overdue items during invoicing with the following configuration in place-
IMG-->SAP Utilities-->Invoicing-->Invoice Processing--->Define Control for Additional Invoicing Functions
If that's the scenario, then check event R418.
Hope it helps...
Thanks,
Amlan -
Help setting up cron to send me emails
I'm currently using cron to run daily backups of my system and to also run rkhunter. When I was using openSUSE I could set up my email to check my local account. I believe that I need "postfix" to be able to do this so I installed it. What else do I need to do besides having this program installed? When I try to add the local account in kmail it is asking me to select a file location. I'm not sure what file to select here. In openSUSE it was already selected for me. Any ideas?
Thanks!I'm no expert on postfix and used to rely on the PostFix HostOnly Howto page in the wiki. Unfortunately, that page got deleted a week or so ago and the content doesn't appear to have been copied into either of the other two postfix pages. Anyway, this is the gist of what it contained:
From http://wiki.archlinux.org/index.php/PostFix_HostOnly_Howto (since deleted)
$ pacman -Sy postfix
Check /etc/passwd, /etc/group to make sure that the following shows up:
postfix:x:73:73::/var/spool/postfix:/bin/false
Make sure that the following shows up in /etc/group:
postdrop:x:75:
postfix:x:73:
Edit /etc/postfix/main.cf and add the following:
inet_interfaces = loopback-only
mynetworks_style = host
append_dot_mydomain = no
default_transport = error: Local delivery only!
Edit /etc/rc.conf and add postfix to the daemons list.
Edit /etc/postfix/aliases and add a username to receive root email, i.e. put a
username in for the the following, substituting the desired actual system
account name for USER:
# Person who should get root's mail. Don't receive mail as root!
root: USER
Run the following command to create a map file for postfix:
$ postalias /etc/postfix/aliases
Create .forward in /root containing the mail address of the user to whom all
mail for root will be forwarded, e.g. USER@localhost
Start the postfix daemon by running
$ postfix check
followed by
$ /etc/rc.d/postfix start
Check /var/log/mail.log for any errors.
Try sending an email:
$ mail -s test USER
this is a test email.
Last edited by azleifel (2009-12-25 09:35:58) -
Hi,
For test purposes we had planned to use google smtp server for sending emails,
For that we had used google's smtp settings
like
smtpserver ==>smtp.google.com
smtuserid ==> mygmailid
smtppassword ==>mygmail password
But google had additionally provided some settings like
1.Use Authentication: Yes
2.Use Secure Connection: Yes (this can be TLS or SSL depending on your mail client)
3.Port: 465 or 587
In ccb i cant find any place to enter the above 3 settings
1.Cant i use google's smtp server for sending emails through ccb?
2.Is smtp outgoing server port not necessary for ccb application to send an email
3.what port does ccb uses?
4.where can i change the default port?
plz help guys.
Edited by: shanker on Mar 29, 2011 3:39 AMHi Rajesh,
As I had replied to you in other post. Create Synchronous Service Interfaces.
And for the response Message Type you use MailReceipt structure. You can get this structure from the Mail Package xsd.
Download this MailPackage xsd from the sap note: 748024
Regards,
Aravind -
Sending job error message to admin by email
Hi everyone...
Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
Is there a better way?
Cheers,
Jefi Santosohi,
>>>Can this be achieved through BPM?
yes you can put your transformation step
and send step in a block and specify an exception
branch and catch all exceptions that will
occur during transformations and the send step
then you can send info from the exception branch to
any other system
you won't be able to catch the error's name
but you will be able to notify any thinrd party
about the error
more on error catching:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
Regards,
michal -
ICal yields "Error during PUT for mailto:valid@email: iMIP request failed"
Hello,
I'm trying to bring up an iCal server (using Mac OS X Lion 10.7.3 Server on a Mac Mini). The basic configuration runs fine. But when I tried to enable eMail invitations, I got stuck with those messages in the error log:
[twistedcaldav.scheduling.imip#error] Could not do server-to-imip request : <twistedcaldav.scheduling.imip.ScheduleViaIMip object at 0x10075e5d0> User timeout caused connection failure.
[twistedcaldav.scheduling.scheduler.ScheduleResponseQueue#error] Error during PUT for mailto:valid@email: iMIP request failed
My configuration settings:
calendar:Scheduling:CalDAV:EmailDomain = ""
calendar:Scheduling:CalDAV:HTTPDomain = ""
calendar:Scheduling:CalDAV:AddressPatterns = _empty_array
calendar:Scheduling:iMIP:Sending:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Sending:UseSSL = no
calendar:Scheduling:iMIP:Sending:Username = "valid@email"
calendar:Scheduling:iMIP:Sending:Address = "valid@email"
calendar:Scheduling:iMIP:Sending:Password = "safe_password"
calendar:Scheduling:iMIP:Sending:Port = 25
calendar:Scheduling:iMIP:Enabled = yes
calendar:Scheduling:iMIP:MailGatewayPort = 62310
calendar:Scheduling:iMIP:Receiving:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Receiving:UseSSL = yes
calendar:Scheduling:iMIP:Receiving:Username = "valid_email"
calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
calendar:Scheduling:iMIP:Receiving:Type = "imap"
calendar:Scheduling:iMIP:Receiving:Password = "safe_password"
calendar:Scheduling:iMIP:Receiving:Port = 993
calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
calendar:Scheduling:iMIP:MailGatewayServer = "valid.mail.server"
calendar:Scheduling:iSchedule:Enabled = no
calendar:Scheduling:iSchedule:Servers = "servertoserver.xml"
calendar:Scheduling:iSchedule:AddressPatterns = _empty_array
It does not even try to connect to the given smtp server. How do I proceed?I dug into the sources, and am now smarter
the above settings are invalid, because of the gateway (this has to be iCal itself):
calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
Now the IMAP server is being asked, but now I have the next problem:
[mailgateway] 2012-03-27 11:14:37+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] Scheduling next IMAP4 poll
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready.
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP servergreeting
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0001 AUTHENTICATE PLAIN
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: +
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 1GNhbEwhZHNwZXJ0LmRlAFlpZXE5YW==
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0001 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP authenticate failed for valid@email, trying login
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0002 LOGIN "valid@email" "valid_password"
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0002 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#error] IMAP login failed for valid@email
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] IMAP factory connection lost
Maybe you are looking for
-
System frequency on a Satellite A100-01L notebook should always be high
Hello, Because I am a battlefield gamer there is a speed problems with my notebook. It is a Satellite A100-01L notebook with 1.73 GHz normal system tact. (2 GByte RAM, 120 GByte HD). The system frequency changes between 800 MHz (without hard job...)
-
Hi All, I have downloaded all the files to install Hyperion Essbase, HFM. Installer, Foundation Services 1 to 7 and Essbase server 1&2, client and HFM files. But while installation i cant see the workspace product under Foundation services or any whe
-
I was one of the four people who bought a Dell Ultra-Wide monitor and wanted to know if that resolution is supported on a Mac Mini. Any thoughts?
-
Pl/sql compile in pro*c
[oracle@Robbie replicate]$ make -f demo_proc.mk tt.c proc iname=tt Pro*C/C++: Release 8.1.7.0.0 - Production on Fri Aug 29 10:40:08 2003 (c) Copyright 2000 Oracle Corporation. All rights reserved. System default option values taken from: /oracle/prod
-
I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears