Error During Load Infocube from ODS

Hi guys i hae an infocube and an ODS i load data to the ODS directly from SAP and its OK but i have an error when i try to load data from ODS to infocube, i`ve created an update rule from ODS to infocube theres an error in the load request "Load Request is invalid" i try to load to infocube from ODS in many ways Full, Init Delta but i have the same error in all of them.....i need to do something before or i need to change in any way the data targets.....
I hope somebody could help me with this.......

HI,
Activate the data in ur ODS. Then right click on ur ODS n choose "create export datasource". Now right click ur ODS and go to "Manage" and make sure that the QM status is green and the Datamart status is checked with a green mark. Now carry on the load from ODS to infocube.
Hope this helps...Let me know
Regards,
R.Ravi

Similar Messages

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

"Error While loading data from ODS to Target "

Hi All,
I am loading masterdata from ODS to infoobject as data target, I am getting an error message as
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
DataSource 80BP_ID does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 09.08.2006 10:17:24.
The time stamp in the BW system is 15.03.2006 16:44:34.
But we are getting Data till ODS, when we manually load from ODS to infoobject this error is coming up.
Please help in resolving this,
Thanks,
Sairam.

You are welcome Sairam
The generated objects are export datasources based on the ODS objects. These are automatically generated because ODS objects are a key component to a data model or datawarehouse strategy where their role is to stage the data for consolidation or harmonization purposes. The generated datasource helps you to load data into further data targets. The use of a cube as an export datasource is not as common, and so the datasource is not automatically generated for them.
Hope this helps...

Error while loading data from ODS to IC.

Hi Experts,
             I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.

Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Error While Loading Data from ODS to ODS

Hi Experts,
When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
I'm unable to see the long text for further information.
Regards,
Vijay

Hi vijay bhaskar,
first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
I hope you understood and can handle your issue.
Assign points if it is helpful.
Reagds,
S P.

Errors during Loading TD from Flat file to PSA

Hi Guys,
I got some errors while loading the flat file transaction data into PSA using infopackage.
Could you guys can help me to solve the below errors. It would be more appreciated if you guys could send some material which tells about these types of errors more detailly.
Points will be awarded.
Field /BIC/ZIO_PRIC ( Position 4 ): External length specification will be ignored
Message no. RSDS101
Diagnosis
The value 23 is specified as output length in Field /BIC/ZIO_PRIC ( Position 4 ). It is also specified that the data is shipped in internal format.
System Response
The length specification for output length is ignored. If the data in the source actually have the specified lengths, this results in conversion errors.
Procedure
Select the external format if required.
Field /BIC/ZIO_PRIC ( Position 4 ): Amount field in internal format; check settings
Message no. RSDS099
Diagnosis
Setting made for Field /BIC/ZIO_PRIC ( Position 4 ) states that the data from the source is available in the internal format.
This is not usually the case for this source system type.
System Response
If you do not change this setting, the data has to be available in the internal SAP format.
Example:
For the Japanese Yen this means: 1000 JPY has to be delivered from the source as 10.00 JPY.
Procedure
Check the data format of the source and where necessary, change the setting to External.
Field /BIC/ZIO_PRIC ( Position 4 ): Missing reference to currency field/unit field
Message no. RSDS151
Diagnosis
If an amount or quantity field is not delivered with values in internal format, an associated currency field or unit field must be specified so that the currency or units can be converted during data import.
System Response
The DataSource can not be activated.
Procedure
Specify a reference field if the data is delivered in external format.
Specify a reference field even if the currency or unit is constant. Fields with fixed values are not part of the data source; they are filled by the system when loaded.

Hi JUergen.
The order of the fields are same as datasource. I didn't make any field for amount in a flat file as it is defined as fixed currency usd when i created a key figure. i don't think so we have to create a field unless we take 0currency is a unit for price instead of fixed currency.
Though we got the above error, it still allows activates the datasource but the 10.00 usd shows as 1000 usd.
Cheers,
Shrinu

The error about loading data from ODS to master data.

hi,experts,when I load the data from ODS to master data,there is an error messege:
" InfoSource 8ZPA_0022 is not defined in the source system.
     Message no. R3005
Diagnosis
     The InfoSource 8ZPA_0022 specified in the data request, is not defined
     in the source system.
System response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench of the Business Information Warehouse,
     update the metadata for this source system, and delete the InfoPackages
     belonging to InfoSources that no longer existing ."
But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

Hi,
as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
regards
Siggi

ERROR DURING LOADING DATA FROM PSA TO DSO IN "PRUEFMBKT"

Respected all
I am trying to load data through an r/3 field( pruefmbkt, char-40length) to infoobject. the data is coming correctly to psa but when i am loading it in to dso or infocube request is turning red giving following error message--
Value '010/12.05-112.15/hold on not operate' (hex.
'3031302F31322E30352D3131322E31352F686F6C64206F6E20') of characteristic
PRU_LSIL contains invalid characters
Message no. BRAIN060
Diagnosis
    Only the following standard characters are valid in characteristic
    values by default:
    !"%&''()*,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.+
    Furthermore, characteristic values that only consist of the character #
    or that begin with ! are not valid.
    You are trying to load the invalid characteristic value 1. (hexidecimal
    representation 3031302F31322E30352D3131322E31352F686F6C64206F6E20).
Procedure for System Administration
    Try to change the invalid characters to valid characters.
    If you want values that contain invalid characters to be admitted into
    the system, make the appropriate setting in BW Customizing. Refer to the
    documentation describing the requirements for special characters and the
    possible consequences.
    For more information on the problems involved with valid and invalid
    characters, click here.
kindly give me the solution how to deal with this problem.
thanks
abhay

HI Abhay,
please check if the infoobject corresponding to field PRU_LSIL in BW system has lower case checkbox enabled in the infoobject properties, as the value '010/12.05-112.15/hold on not operate' coming from R/3 has lower case alphabets.
Hope this helps.
Regards,
Umesh.

Error while loading data from DSO to Infocube

Hi all,
I'm loading data from flat file to the cube via a DSO. I get an error in the DTP.
The data loads to the DSO, i'm able to see the contents in the active data table.
Transformation from DSO to Cube is activated without any errors. Its a one to one mapping. No routines used.
When i execute the DTP ( i use full load option as it is a one time load) i get the following error in DTP: All of which are Red.
Process Request
Data Package 1: Error during processing
Extract from DSO XXXXX
Processing Terminated
The long text of the error gives the msg: Data package 1: Processed with errors RSBK257
Thanks

Hi,
You can check the below forums.
DTP with error RSBK257
- Jaimin

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while laoding data from ODS to infocube

Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
     Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the steps

Thanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Error in Process Chain From ODS to InfoCube

Hi There
What variants should follow to load data from ods to infocube in process chains?
I created Process Chain,first delete content of ods and data load,Activate ods , further update ods , delete index , load from ods to IC and generate index and it's warning message.
Advice me regarding this.
Regards,
Chandu.

HI Chandu,
Please remove the further update process from the chain.
The chain should look like...
startdelete contents of the ODS-load to ODSactivate ODS-delete index of cubeload from ODS to Cubereconstruct indices.
If its only a warning msg ...u can neglect...try activating the process chain and run it with an immediate option.
By the way what does the warning msg say??
There should be a process.....something like this ...then neglect it..
Regards,
Marc
Message was edited by: Marc
Message was edited by: Marc

Error while loading data to ODS in BI7

Getting such following errors when loading data to ODS through DTP(Data Transfer Process) in BI7.
Runtime error while executing rule -> see long text RSTRAN
Record filtered because records with the same key contain errors     RSM2
and many so on...
source system is ok no problem with the connection part.
plz help.

Hi Anup.
Probably your records are not Unique, while you have told the system they should be.
Try to move a discrimination characteristic from data fileds to key fileds.
Or
Try to set the "duplicate reords allowed" setting in your datasource (tab "General Settings" Delivery of Duplicate Data Recs. = Allowed)
Udo

Error During Load Infocube from ODS

Similar Messages

Maybe you are looking for