ERROR DURING LOADING DATA FROM PSA TO DSO IN "PRUEFMBKT"
Respected all
I am trying to load data through an r/3 field( pruefmbkt, char-40length) to infoobject. the data is coming correctly to psa but when i am loading it in to dso or infocube request is turning red giving following error message--
Value '010/12.05-112.15/hold on not operate' (hex.
'3031302F31322E30352D3131322E31352F686F6C64206F6E20') of characteristic
PRU_LSIL contains invalid characters
Message no. BRAIN060
Diagnosis
Only the following standard characters are valid in characteristic
values by default:
!"%&''()*,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.+
Furthermore, characteristic values that only consist of the character #
or that begin with ! are not valid.
You are trying to load the invalid characteristic value 1. (hexidecimal
representation 3031302F31322E30352D3131322E31352F686F6C64206F6E20).
Procedure for System Administration
Try to change the invalid characters to valid characters.
If you want values that contain invalid characters to be admitted into
the system, make the appropriate setting in BW Customizing. Refer to the
documentation describing the requirements for special characters and the
possible consequences.
For more information on the problems involved with valid and invalid
characters, click here.
kindly give me the solution how to deal with this problem.
thanks
abhay
HI Abhay,
please check if the infoobject corresponding to field PRU_LSIL in BW system has lower case checkbox enabled in the infoobject properties, as the value '010/12.05-112.15/hold on not operate' coming from R/3 has lower case alphabets.
Hope this helps.
Regards,
Umesh.
Similar Messages
-
Urgent : Error while loading data from PSA to DSO
Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear. -
Error while loading data from PSA to DSO using DTP
Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
ThanksHi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM -
Error while loading data from PSA to DSO
Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum -
Long time to load data from PSA to DSO -Sequential read RSBKDATA_V
Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
NileshHi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06. -
Error in loading data from PSA to masterdataTables by using ProcessManually
Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
SoujanyaHi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano -
Error while loading data from PSA to Infoobject through DTP(URGENT)
Hi-
I am running into an issue while loading the data from PSA to Infoobject.
It says
Data Package 1 : error during processing.
Updating Attributes for Infoobject
Error in substep
Process Terminated
Please let me know ur solution as this is very urgent....Data Package 1 : error during processing.
This is the error when your flat file is opened at the time of scheduling. Pls close your flat file, will upload correctly.
Let me know if you have any further query. -
Error while transferring Data from PSA to DSO
Hi all,
We had a requirement to load data into the DSO.We are extracting it from R3.
Problem is that while loading in PSA it is showing 1056 records ,But when we are trying to load it in DSO it is showing Transferred records as 1428 and added records as 1073.Please help ASAP!!!!!!!!Hi,
the difference in records can be due to some changes happening in the transformation.
check your transformation from the DS to your DSO if it contains any start,end or update routines oe any other such thing.
Also check if there is one to one mapping from DS to DSO or if some fields in DS are not mapped to DSO.
Regards,
Dhanya -
Long time to load data from PSA to DSO / CUBE. Sequential read RSBKDATA_V
Hi Gurus
The process stays for several hours on sequential read from RSBKDATA_V - temporary storage for DTPs.
After several hours, the processing finally starts, but even when I assign several BGDs to the DTP it takes hours to load the data.
We have BI7.0 with SP22, so all relevant notes are already implemented.
Does any one had similar problem, please?
Thanks in advance
MartinHi Martin,
this issue has cropped up a few times. Please check and implement the following notes:
1338465 P22:DTP:LOG: Performance problem when messages are added +
1331544 P22:HINT:Slow performance when accessing RSMONFACT +
1312701 70SP21: Performance on view RSBKDATA_V selects
1304234 70SP21: Performance on the hashed table p_th_rsbkdata_v **
1168098 70SP19: Performance during DataStore object extraction
1080027 70SP16: Performance during parallel processing
These notes should improve the performance of the DTPs in your system.
After you've added the notes, please check in tables RSBKDATA and RSBKDATAINFO whether they contain any data. If the tables are empty, please reorganise the tables, and restart the dtp.
Hope this helps you.
Rgds,
Colum -
Error when loading data from PSA TO Target(ODS)
I am getting the following errror:-
The value ' 20080712143841' from field CRM_CHANGED_AT is not convertible into the DDIC data type DATS of the InfoObject in data record 61. The field content could not be transferred into the communication structure format.
The data to be loaded has a data error or field CRM_CHANGED_AT in the transfer structure is not mapped to a suitable InfoObject.
plz helpHi Anup,
To rectify this problem you need to write a routine in transfer rule for that characteristic.
for ur reference iam giving here one sample code-
*here iam refereeing data filed as ZSF_CLSDT*
Data: l_date(10) type c.
data: l_yyyy(4) type n,
l_mm(2) type n,
l_dd(2) type n.
l_date = TRAN_STRUCTURE-/BIC/ZSF_CLSDT.
split l_date at '-' into l_yyyy l_mm l_dd .
concatenate l_yyyy l_mm l_dd into RESULT.
it will give me date as YYYYMMDD.change this code according to your convenience.** -
Error when i am loading data from PSA to ODS
hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
JayavardhanHi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P -
Loading data from infoset to DSO
Hi,
Iam loading data from InfoSet to DSO..the transformations were fine..no errors found.
But could not activate the target DSO.
Getting error.".Error while activating transformation"
How to over come this??
Thanks
RaviHi Ravi Kanth,
Please check the following links. Hope this helps.
[/message/1410802#1410802 [original link is broken];
[/message/2115621#2115621 [original link is broken];
Thanks,
Sruthi -
Error while loading data from 0FI_TX_4 to ODS
Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
TonyHow are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks -
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
Error while loading data from a file on application server
Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
PraveenHi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen
Maybe you are looking for
-
My W540 is coming in this week, and I have some questions.
So my W540 is arriving, and here is what I plan to do as soon as I get it: Turn on computer and verify that all hardware works. Update to the latest BIOS. Replace the HDD with my own SSD. Reinstall Windows. Here is my configuration for reference: Int
-
Annual Oracle OpenWorld 2014 User Community Cloud SIG meetup
Each year at Oracle OpenWorld and then at the Collaborate User Conference, the IOUG Cloud SIG invites participation from customers and partners interested or building Clouds using Oracle product technologies. A brief history on the SIG here Just prio
-
Print paper size for Purchase order
Hello, We have purchase orders for Japan, Sweden. The requirement from business to print for A4 size and Legal size. What does Legal size mean? Does it mean 'Japan Legal Size' and 'Sweden Legal Size'. Sincerely, Sanjay
-
Odd Error with Fireworks not seeing some folders or files
I have just updated to OS X 10.5.1 running on a Mac Pro 2x 2.66Ghz dual-core Intel Xeon with 5gb of memory. I have been using CS3 for some time now on OS X 10.4 with no problems. After the upgrade I now can't see some folders and files via Fireworks.
-
Student creative cloud and the photoshop touch app?
So I have recently signed up to the student creative cloud package and listed in this is the photoshop touch app however when I try download this it is trying to charge me £6.99 what do I do?