Error during loading of transaction data: An RFC call-up triggered the ...

Dear Sirs,
during loading of master data from a 4.6C SAP system to BI 7.0 SP9 I get the following error during processing (data packet).
<i>"An RFC call-up triggered the exception (ID: RSAR NO: 503) "</i>
The strange thing with this error is that it emerged today, after successfully loading master data and a subset of transaction data yesterday from same source system.
Has anyone else come across this error, and can tell us where we should look for a possible solution? (or a better error explaination).
The RFC connections works fine when testing in SM59, and was functioning yesterday. No relevant dumps in either system.

Hi folks,
I am also interested in this error.
Thanks.

Similar Messages

  • Error during loading of initialization data for 0ic_c03

    Hi
    I am setting up the inventory cube 0IC_C03 for stock reports. I am following the document How to Scenarios for inventory management.
    I have made the necessary preperations in the R/3 side. The setup tables have been populated and the data is visible using rsa3.
    Now in BW i have created infopackages for the 3 data sources 2LIS_03_BX / BF / UM.
    For 2LIS_03_BX the update status is generate initial status
    For 2LIS_03_BF the update status is  initialize delta process
    For 2LIS_03_UM the update status is  initialize delta process
    I am now trying to upload the data for stock initialization by scheduling the 2LIS_03_BX infopackage for an immediate pull. However in the manage are there are no records being transferred (0 of 0 records) and the status of the request is yellow.
    Is there some interim step that i am perhaps missing?
    Regards
    Pranav

    Hi AHP / Aby
    The update was going on for an elongated period of time so I set the QM status to red and have restarted the data pull. This time the data did come to the BW system but still showed an error.
    The details panel shows the following information
    > Overall status : Errors occured or missing messages
    > Requests everything ok (green light)
    >Extraction : Errors occured (yellow light)
    >>25000 records sent (yellow)
    >>22115 records recieved (green)
    >Transfer (Idocs and TRFC) Errors occurred
    >> Data package1 :25000 records arrived in BW (green light)
    >> Data package 2 : arrived in BW. Data records for package 2 in PSA-1 er (red light)
    >Processing (Errors Occured) (red)
    >> Data package1 (25000 records):missing messages (yellow)
    >>>update PSA (25000 records posted) : no errors (green)
    >>>transfer rules (25000 records >25000 records) : no errors (green)
    >>>Update rules (25000 >39027 records): no errors (green)
    >>> Update (0new/0 changed) Warning recieved(red)
    >>>>Data records for package 2 selected in PSA 1 error
    >>>>>>>> record 1965 : value of characteristic 0batch contains invalid number
    >Processing End : Errors occured
    >> Error 4 in the update
    According to my understanding of the situation there is a data error in the record 1965 in the second package. Is it possible / advisable to go an edit this in the PSA? If not then what is the procedure to be adopted. Since this is an initiallization and not a delta update i am not sure whether i should pull this again!
    Thanks in advance and for all the help so far! its really appreciated!
    pranav

  • Error during activation of ODS data

    Hi all,
    I am getting error during activation of ODS data.
    Error: Error occur during activation.
    How to check , where that error exactly occurs.
    Appreciating any response.

    Hi Santosh,
    SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
    there are various status they are
    PLANNED
    RELEASED
    CANCELLED
    ACTIVE
    FINISHED
    READY
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
    In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
    hope this helps
    regards
    Karthik
    Assign points if helpful

  • How To... Update Master Data during upload of transaction data

    Can anybody let me know how this can be achieved.
    I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
    I dont want separate datasources.
    The datasource is actually transactional datasource.
    I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
    I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
    How To... Update Master Data during upload of transaction data
    Thanks.

    Dear Praveen
    I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
    In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
    I got the below link which may be helpful
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8

  • Loading master/transaction data from BI to NW BPC

    hi
    what is best way of loading master & transaction data from BI to BPC?
    I know around 6 options for loading master data and 5 options for loading transactional data from BI to BPC .
    What is easiest and recommended method? what is typical method followed in your NW bpc projects?
    thanks,.

    Hi Raju,
    There is a white paper on Loading master data. I've used it previously and both options work quite well. You can use either of them depending on what you are comfortable with. Its available on the HOW To white papers.

  • Error while loading service SLD Data Supplier

    HI All,
    I am getting an error when i am trying to access the SLD Data Supplier via Visual Administrator.
    Error while loading service SLD Data Supplier
    java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
    Can somebody tell me how to fix this?
    Regards
    Prakash

    Hi Nigel,
    thanks a lot - I can now access the SLD data supplier from my local visual admin- great!
    unfortunately, the key storage service still throws the error:
    java.lang.NoClassDefFoundError: iaik/x509/V3Extension
            at com.sap.engine.services.keystore.admin.gui.KeystoreContentPanel.<init>(KeystoreContentPanel.java:34)
            at com.sap.engine.services.keystore.admin.gui.SingleKeystoreViewPanel.<init>(SingleKeystoreViewPanel.java:31)....
    Do you know if it's something different with the key storage?
    Best regards
    Cornelia

  • Error while loading Reported Financial Data from Data Stream

    Hi Guys,
    I'm facing the following error while loading Reported Financial Data from Data Stream:
    Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
    The message appears in Target Data.  Item is not filled in almost 50% of the target data records and the error message appears.
    Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown.  When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data.  Item is not filled up, hence causing the error.
    For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign.  When it is posted as negative / Credit in the source data, it is not properly written to the target.
    Should I need to define any breakdown category for these items?  I think there's something wrong with the Item definitions OR I'm missing something....
    I would highly appreciate your quick assistance in this.
    Kind regards,
    Amir

    Found the answer with OSS Note: 642591..... 
    Thanks

  • Making an RFC call from within the VM container

    Hi all,
    since a long time I am searching for information on how to implement an RFC call from within the VMC. The problem is that we have implemented several (p)functions in ABAP and we need to implement them in JAVA.
    Now I am searching for a way how to just call the already existing pfunctions???
    Is it possible to read CRM DB tables too?
    Thank you in advance
    Boris

    Hi Freeto,
    This may be due to the Network Failures.
    If you have triggered a job then because of the Network fluctuations the system may not respond properly and cannot execute the job.
    So, this is the cause for the failure.
    Hope you understood.
    With Regards,
    Ravi Kanth

  • Errors during Loading TD from Flat file to PSA

    Hi Guys,
    I got some errors while loading the flat file transaction data into PSA using infopackage.
    Could you guys can help me to solve the below errors. It would be more appreciated if you guys could send some material which tells about these types of errors more detailly.
    Points will be awarded.
    Field /BIC/ZIO_PRIC ( Position 4 ): External length specification will be ignored
    Message no. RSDS101
    Diagnosis
    The value 23 is specified as output length in Field /BIC/ZIO_PRIC ( Position 4 ). It is also specified that the data is shipped in internal format.
    System Response
    The length specification for output length is ignored. If the data in the source actually have the specified lengths, this results in conversion errors.
    Procedure
    Select the external format if required.
    Field /BIC/ZIO_PRIC ( Position 4 ): Amount field in internal format; check settings
    Message no. RSDS099
    Diagnosis
    Setting made for Field /BIC/ZIO_PRIC ( Position 4 ) states that the data from the source is available in the internal format.
    This is not usually the case for this source system type.
    System Response
    If you do not change this setting, the data has to be available in the internal SAP format.
    Example:
    For the Japanese Yen this means: 1000 JPY has to be delivered from the source as 10.00 JPY.
    Procedure
    Check the data format of the source and where necessary, change the setting to External.
    Field /BIC/ZIO_PRIC ( Position 4 ): Missing reference to currency field/unit field
    Message no. RSDS151
    Diagnosis
    If an amount or quantity field is not delivered with values in internal format, an associated currency field or unit field must be specified so that the currency or units can be converted during data import.
    System Response
    The DataSource can not be activated.
    Procedure
    Specify a reference field if the data is delivered in external format.
    Specify a reference field even if the currency or unit is constant. Fields with fixed values are not part of the data source; they are filled by the system when loaded.

    Hi JUergen.
    The order of the fields are same as datasource. I didn't make any field for amount in a flat file as it is defined as fixed currency usd when i created a key figure. i don't think so we have to create a field unless we take 0currency is a unit for price instead of fixed currency.
    Though we got the above error, it still allows activates the datasource but the 10.00 usd shows as 1000 usd.
    Cheers,
    Shrinu

  • Data error when loading to master data?

    Hi,
    I am loading data from Data base to BW.It is a master data loading.I got an error in the 8th package of the load for the time field which is server update time(reference 0TIME) .The data server update time for that particular record is  '19900101'.I am really confused what is the error with this kind of data?
    Here is error message:
    0TIME: Data record 1797 ('3YV4C0EJBWTGO1CA'): Version '199001' is not valid
    Message no. RSDMD194
    Diagnosis
    Data record 2. with the key '3.' is invalid in value '4.' of the attribute/characteristic 1..
    System Response
    The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
    Procedure
    If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
    Please help me to resolve this also explain what is the differnce in this kind of data?
    Thanks,
    Vasu

    right click on the master data --> delete master date, BUT you will only be able to delete master data not used in a cube (you'll get a pop up to confirm this)...if you want to delete master data already used in a cube, you need to delete the contents of this cube first (and any other cube where this master data is used)...only then you can completely delete the master data entries
    M.

  • Loading of transaction data from SAP ECC system failed

    Hi!
    I successfully connected SAP ECC system to SAP BI system.
    The following steps have been executed:
    - user ALEREMOTE with max. authorization
    - RFC destination
    - Distributing Data model
    - Generated Partner profile
    - Maintaining message types in WE20
    Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
    [0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
    The following steps within Load process are yellow:
    Extraction (messages): Missing messages
      Missing message: Request received
      Missing message: Number of sent records
      Missing message: Selection completed
    Transfer (IDocs and TRFC): Missing messages or warnings
      Request IDoc : Application document posted (is green)
      Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
      Info IDoc 1 : sent, not arrived ; Data passed to port OK
      Info IDoc 2 : sent, not arrived ; Data passed to port OK
      Info IDoc 3 : sent, not arrived ; Data passed to port OK
      Info IDoc 4 : sent, not arrived ; Data passed to port OK
    Subseq. processing (messages) : Missing messages
        Missing message: Subseq. processing completed
        DataStore Activation (Change Log) : not yet activated
    Question:
    Can some one give me some technical steps (tcode, report) to solve this problem?
    Thank you very much!
    Holger

    Hi!
    Many thanks for your answer.
    Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
    Via tcode SM58 I could not detect any entries.
    However the loading status from yesterday is set to "red".
    The errors are:
    Extraction (messages): Missing messages
    Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
    Info IDoc 1 : sent, not arrived ; Data passed to port OK
    Info IDoc 2 : sent, not arrived ; Data passed to port OK
    Can you investigate my issue again?
    Thank you very much!

  • SAP Best Practice: Problems with Loading of Transaction Data

    Hi!
    I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
    Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
    My problems are:
    when I try to load the Transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 I get the following errors/warnings:
    when I start the "schedule process" the status getting still "yellow 14:27: 31(194 from 0 records)"
    On the right side I see some actions that are also "yellow", e.g. "DataStore Activation (Change Lo ): not yet activated".
    As a result I cannot see any data in tcode "RSRT" executing the queries "0FIAR_C03/...".
    The problems there
    1) Input help of the web template of query don't contain any values
    2) no data will be shown
    Can some one help me to solve this problem?
    Thank you very much!
    Jürgen

    Be in the monitor window where u got the below issue
    when I start the "schedule process" the status getting still "yellow 14:27: 31(194 from 0 records)"
    and go to environment in the menu options TransactRFC--->in the sourcesystem...
    give the logon details and enter and from there give the correct target destination as ur BI server and execute...
    if u find some idoc's pending there push that manually using F6..
    and come back to ur load and refresh....
    if still it doen't turn green u can manully change status to red in STATUS tab and come to processing tab and expand ur processing details and right click on ur data packet which was not yet updated and select manual update...
    it shows busy status and when it comes out of that once again refresh...
    rgds,

  • Loading transaction data using an attribute field in the BW cube

    I am trying to load transaction data into BPC.  All but one of my dimensions are referencing technical fields.  One of my fields is referencing an attribute of a technical field.  The technical field is called 0MAT_PLANT and the attribute of that field is 0PROFIT_CTR.  In my mapping section of my transaction file I set the PROFIT_CTR dimension to 0MAT_PLANT__0PROFIT_CTR.  The transaction file validates and processes fine but when I try to import I get the error message: 0MAT_PLANT__0PROFIT_CTR is not a valid command or column 0MAT_PLANT__0PROFIT_CTR does not exist in source
    Does anyone know how to complete this successfully?
    THANK YOU!
    Karen B. Thibodeau

    Hi,
    If is mapped fine and still getting same errors, maybe you can try to check if the IO attribute it's checked in the options in the data package.
    Regards

  • Error while loading customer master data through Idoc (DEBMAS) from BODS

    Hi All,
    I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
    I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
    Thanks & Regards,
    Balamurugan G

    Hi, did you referred this link : Error during customer master mass update through XD99

  • Error in Loading Project master Data into BW from R3

    Hi Experts,
    Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
    But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          27.09.2011 01:47:15
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_CGPL_TASK==================CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
         caught in
        procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: "ME->OUTLINE_PARENT").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
    I am seeking help from you guys.
    Please help to overcome this problem...!
    Thanks.

    it seems basis issue
    howver check below links
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
    OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
    thanks
    pathak

Maybe you are looking for