Error during log on to GUI 720
Hi Experts,
I am having problems logging on to my newly installed ERP (on my stand alone system via a virtual machine- Oracle virtual box) via gui 720, I keep getting the following message:
partner' 192.168.0.28' not reached
WSAECONNREFUSED
Regads.
Bryne
there is no firewall on the server(it is a virtual machine) no antivirus is installed and windows firewall is turned off; i can successfully ping the IP.
Here are the last lines of the logs
dev.disp:
Fri Jun 03 13:13:58 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:13:59 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:00 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:01 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:02 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:03 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:04 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:05 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:06 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:07 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:08 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:09 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:10 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:11 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:12 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:13 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:14 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:15 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:30 2011
SoftCancel request for T15 U18 M0 received from IC_MAN
Fri Jun 03 13:14:36 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:37 2011
DpHdlDeadWp: restart wp (pid=2064) automatically
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 13:14:38 2011
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Fri Jun 03 20:59:30 2011
DpSigInt: caught signal 2
DpHalt: shutdown server >ecc1_ECC_00 < (normal)
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes
Fri Jun 03 20:59:31 2011
Stop gateway
Stop icman
Terminate gui connections
wait for end of work processes
wait for end of gateway
waiting for termination of gateway ...
Fri Jun 03 20:59:32 2011
wait for end of icman
waiting for termination of icman ...
Fri Jun 03 20:59:33 2011
waiting for termination of icman ...
Fri Jun 03 20:59:34 2011
DpStartStopMsg: send stop message (myname is >ecc1_ECC_00 <)
DpStartStopMsg: stop msg sent
Fri Jun 03 20:59:35 2011
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12099]
MBUF state OFF
MBUF component DOWN
cleanup EM
Fri Jun 03 20:59:37 2011
***LOG Q05=> DpHalt, DPStop ( 2812) [dpxxdisp.c 10371]
Dev-w0
M switch on control 0x40 for W11 (0x0 -> 0x40)
M switch on control 0x40 for W12 (0x0 -> 0x40)
B ***LOG BY4=> sql error 12571 performing SEL on table USR41 [dbtrtab#6 @ 3908] [dbtrtab 3908 ]
B ***LOG BY0=> ORA-12571: TNS:packet writer failure [dbtrtab#6 @ 3908] [dbtrtab 3908 ]
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThUsrDelEntry (*, *, ecc1_ECC_00 ) o.k.
M ThICommit3: full commit, set time, keep resources, redispatch
M ThICommit3: db unusable
M ThExecShutDown: ThUsrDelEntry o.k.
M ThExecShutDown: called rsau_log_system_stop
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20110603 131102 ECC1
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=000000000AB7F128,usrhp=00000000081D6428)
C Detaching from DB Server (con_hdl=0,svchp=000000000AB7F128,srvhp=0000000015DAF118)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=2310, com_tx=935)
B statistics db_con_rollback (roll_total=11, roll_tx=3)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 620) [dpnttool.c 327]
Similar Messages
-
Error during logging in to sap
Hi friends,
I have a problem with SAP IDES in my home pc. when i am trying to start the console, I am getting a problem. message server is running but dispatcher in not getting connected to the workprocesses and after few minutes it is getting stopped. Due to this I could not log on to the SAP SERVER. its is giving two errors like
<b>TYP</b> <b> Mno text</b>
D1 CPG R/3 basis tystem: Failed to set
environment for language.........
U7 R/3 basis system: in table
TCPDB, there are ' 0 ' entries.
and the console is staying in yellow color with status of the workprocesses as <b>"ENDED"</b>Check your trace files for any hints. You can find them under /usr/sap/<SID>/DVEBMGS<XX>/work
dev_disp
dev_w0
etc -
Error during connect to the instance Content Server MAXDB-XSERVER Receive
We rebooted this mornning a PROD Instance with SAPDB!
Second Instance is a Content Server. Now, we got an error during connect via
DBM Gui to Maxdb 7.6.06.04
2011-08-19 10:06:32 577 ERR 11926 XSERVER Receive packet, Ref:8 - socket recv error (110:Connection timed out
Environment variable : 1. Insctance PROD
2. Instance Prod Content Server
We couldnt connect to the database Instnce via DBMgui and also DB50 all collected data are visible, but its possible to start
DBACOCKPIT, analyse DB analyser : Message
Info Size of data cache 260306 pages, 99.98% in use, size of converter cache 1762 pages
Its seems so regarding to the Info of DB Analyser: Instance CSP (sap1) is up since 2011-06-10 12:20:10 that the Content server
didnt recognize that there was a boot this morning!!
In DBACOCKPIT it seems to be o.k. ! We could not boot the PROD Host asap again, because of the maintenance time window!
Where we could check more featur. of the content server. The processes seems to be o.k.!> Near the same problem occurs on our backup content server MAXDB!
> The backup runs during this situation a expanded longer time as normal. I get in DBM Gui today always the error code -4 socket recieve error, the Icon goes green, but there isnt any possibility to analyse the check area -> Diagnosis Files, to improof the status via gui! Via tc DBACOCKPIT i could connect to the instance and get some data! For example, If i try to stop the DB analsyser, its not possible.
I would stop the full gui and also end all dbm*.exe processes in the task manager and start it new.
Markus -
Error message "ABAP/4 error during dynamic assign" on Contact Log creation.
Hi,
We are getting an error message "ABAP/4 error during dynamic assign beyond program bounds" displayed while creating contact log using transaction "BCT0".
Please suggest what can be the cause of the error message and how we can remove this.
Regards,
AnkurDear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
and bldgr = '0110'
and mnum = 23
and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro -
I'm getting an unknown communication error during my chat to initiate AIM screen sharing. Any clues as to why? Here's the comm log...
I don't usually have problems reaching and doing IT for my family. Is weird.
Date/Time: 2015-04-12 11:46:01 -0400
OS Version: 10.10.2 (Build 14C1514)
Report Version: 4
Messages Connection Log:
2015-04-12 11:45:33 -0400: 0x7ffb826cc310: State change from No State to Invited.
2015-04-12 11:45:45 -0400: 0x7ffb826cc310: State change from Invited to Connecting.
2015-04-12 11:45:58 -0400: 0x7ffb826cc310: State change from Connecting to Ended.
2015-04-12 11:45:58 -0400: 0x7ffb826cc310: Error -1 (An unknown error occurred.)
Video Conference Error Report:
Video Conference Support Report:
7.728039 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1973 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
18.955646 @/SourceCache/VideoConference/VideoConference-473/VCChannel/VCChannel.m:303 type=2 (00000000/0)
[VCChannel prepareConnectionWithRemoteConnectionData - remote VCConnectionData: 1]
18.964195 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1988 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
18.966613 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2180 type=2 (00000000/0)
[Initiate Conference To User: 1002 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
25.205927 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1973 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
31.603943 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:1988 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
31.604365 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2180 type=2 (00000000/0)
[Initiate Conference To User: 1002 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
18.964411 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2085 type=5 (00000000/0)
[Remote Router]
[BAD TEST]
18.964419 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2087 type=5 (00000000/0)
[Remote CommNAT Result: 0x00000001
18.966640 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1679 type=5 (00000000/0)
[Router]
[FULLCONE]
18.966648 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1681 type=5 (00000000/0)
[CommNAT Result: 0x00000102
31.604133 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2085 type=5 (00000000/0)
[Remote Router]
[BAD TEST]
31.604144 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VCInitiateConference.m:2087 type=5 (00000000/0)
[Remote CommNAT Result: 0x00000001
31.604370 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1679 type=5 (00000000/0)
[Router]
[FULLCONE]
31.604379 @/SourceCache/VideoConference/VideoConference-473/Video Conference/VideoConferenceGlobalObjects.m:1681 type=5 (00000000/0)
[CommNAT Result: 0x00000102Hi
Ah a homehub.
Set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(
In ichats prefs click on video and change bandwidth limit to NONE.
Goto sys prefs/security/firewall and check "set access for specific........" and click the + at the bottom and add ichat to the list.
Restart ichat.
Also try connecting to me dfcom1 .mac account.
Tony -
XML log: Error during temp file creation for LOB Objects
Hi All,
I got this exception in the concurrent log file:
[122010_100220171][][EXCEPTION] !!Error during temp file creation for LOB Objects
[122010_100220172][][EXCEPTION] java.io.FileNotFoundException: null/xdo-dt-lob-1292864540169.tmp (No such file or directory (errno:2))
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
at oracle.apps.xdo.dataengine.LOBList.initLOB(LOBList.java:39)
at oracle.apps.xdo.dataengine.LOBList.<init>(LOBList.java:30)
at oracle.apps.xdo.dataengine.XMLPGEN.updateMetaData(XMLPGEN.java:1051)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:511)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1121)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1144)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:558)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:348)
at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
I have this query defined in my data template:
<![CDATA[
SELECT lt.long_text inv_comment
FROM apps.fnd_attached_docs_form_vl ad,
apps.fnd_documents_long_text lt
WHERE ad.media_id = lt.media_id
AND ad.category_description = 'Draft Invoice Comments'
AND ad.pk1_value = :project_id
AND ad.pk2_value = :draft_invoice_num
]]>
Issue: The inv_comment is not printing on the PDF output.
I had the temp directory defined under the Admin tab.
I'm guessing if it's the LONG datatype of the long_text field that's causing the issue.
Anybody knows how this can be fixed? any help or advice is appreciated.
Thanks.
SW
Edited by: user12152845 on Dec 20, 2010 11:48 AMHi All,
I got this exception in the concurrent log file:
[122010_100220171][][EXCEPTION] !!Error during temp file creation for LOB Objects
[122010_100220172][][EXCEPTION] java.io.FileNotFoundException: null/xdo-dt-lob-1292864540169.tmp (No such file or directory (errno:2))
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
at oracle.apps.xdo.dataengine.LOBList.initLOB(LOBList.java:39)
at oracle.apps.xdo.dataengine.LOBList.<init>(LOBList.java:30)
at oracle.apps.xdo.dataengine.XMLPGEN.updateMetaData(XMLPGEN.java:1051)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:511)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1121)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1144)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:558)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:348)
at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
I have this query defined in my data template:
<![CDATA[
SELECT lt.long_text inv_comment
FROM apps.fnd_attached_docs_form_vl ad,
apps.fnd_documents_long_text lt
WHERE ad.media_id = lt.media_id
AND ad.category_description = 'Draft Invoice Comments'
AND ad.pk1_value = :project_id
AND ad.pk2_value = :draft_invoice_num
]]>
Issue: The inv_comment is not printing on the PDF output.
I had the temp directory defined under the Admin tab.
I'm guessing if it's the LONG datatype of the long_text field that's causing the issue.
Anybody knows how this can be fixed? any help or advice is appreciated.
Thanks.
SW
Edited by: user12152845 on Dec 20, 2010 11:48 AM -
Error during netlist generation and log audit trail error
I am not able to run the simulation application on my Multisim 10. The two following error were generated every time I try to run the simultion:
Error: log /Audit Trail, C: \document~1\xxx: Permission denied
Error during netlist generation, C:\document~1\xxx: Permision denied
Can any body help me fix this problem that make it impossible for me to use the Multisim10 simualtion tool?There are two KBs I would like for you to see, since they might have the answer to the problem you are having:
1. This KB is related to having access to the TEMP directories where Multisim stores temp files for simulation:
http://digital.ni.com/public.nsf/allkb/15526EB2464F3EDD8625722C00696BB0
2. This other KB deals with non-Administrator users of Windows, it talks about v9 but the idea is the same for v10, just look for the v10 installation paths:
http://digital.ni.com/public.nsf/allkb/0DF597C217A235BE862571FB004F24BD
Nestor
National Instruments -
LONGPOST.LOG Errors during Upgrade from 4.6C to ECC 6.0
Dear all,
We have received the below errors during our upgrade from 4.6C to ECC 6.0.
Basically we have received three types of errors:
1.
4PETG065 RSUPGDEC: Table/structure "BAPE_VBAK" (component "SD-SLS" ) enhanced illegally: Error "2"
2.
A2PESEEF_BADI 103 BAdI implementation "/IRM/BADI_SDDOCFLOW" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZZ_MG_MASS_NEWSEG" must still be migrated A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
3.
3PETG447 Table and runtime object "/SSF/DHEAD" exist without DDIC reference ("Transp. table")
3PETG447 Table and runtime object "/SSF/DTAB" exist without DDIC reference ("Transp. table")
3PETG447 Table and runtime object "/SSF/PTAB" exist without DDIC reference ("Transp. table")
Can anyone help us how to solve this issues.
Thanks & Regards
SenthilHi,
Senthil following are ans to ur questions
1. After the SPAU remediation is completed, should I manually release the transport or should I start the upgrade and the upgrade will release that transport?
Ans : Once your SPAU remediation is completed you should release the requests and then start the upgrade of the DEV system.
2. How do we import this SPDD & SPAU transport in the QA and PRD, I mean at what stage of the upgrade we need to specify/ include this transport?
Ans : Now when you start the QA or PRD upgrade at that time you come across a phase during PREPARE called ADJUSTPRP.
Refer following note for further information --
SAPNote 124522 - Importing a modification adjustment in 2nd upgrade
3. Suppose the QA & PRD has more objects to adjust than our Dev box, and this transport will not take care of the delta objects, so in that case how should we remediate, we need to create an other transport request in QA and then it will become two transports?
Ans : First of all this should not be the scenario where you have more modified objects than that in DEV. As all the modfications should take place in DEV first and then should be transported to QA and then PRD. But in such case what you can do is complete the upgrade of QA system and then you are still having 14 days to complete the SPAU objects. So you can make another request which can be transported as a post upgrade activity once the upgrade is completed in production. For SPDD you will have to take care of the SPDD objects if there are different than those in DEV during the ACT_700 phase only or else you might risk data.
This is the reason why SAP always asks you to follow a proper transport path.
4. If our dev box has more objects for remediation than our QA & PRD, then will these objects be also imported into the QA & PRD box?
Ans : Yes, thats why you should be very sure about the SPAU objects that you have found in DEV. You need to compare the objects with QA and PRD and then only make the modifications.
I hope i have answered all your queries.
Regards,
Suhas -
In system log shows Error in technical configuration Error during the ret
Hi,
In sm21 it shows <Error in technical configuration Error during the retieval of logon data stored in>.
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
30808 Dialog work process No. 009 SAPSYS 1 TASK_VITAL_RUN K SAP Web AS Problem SOAP_FT_TOOLS
In wp trace shows below with the matched time:
A Thu May 26 13:08:03 2011
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
H
H Thu May 26 13:08:05 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:09 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:10 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:12 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:13 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
H
H Thu May 26 13:08:15 2011
H *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c 1660]
[icftrace.c 597]
Kind of error when retrieve the logon data.
Kernel 711 PI system
SP level 04
What possibily casued this? No further information I can have.
Thanks,
EmmaHello
Please implement the latest kernel for your release. See note #19466. The error will not occur with the latest kernel patch.
Regards
Mark -
Hello Guys,
one of my user is facing some issues after installation of GUI 720 in the transaction FBL5N.
When he is running the transaction he is missing i's & e's in the report in 5th & 6th line.
Any body have any idea why this is happening ?Hi,
do you have the latest patchlevel (currently 9) installed? If not, please try if upgrading to PL 9 solves the problem.
Regards,
Jann -
Error during OIM schema upgrade during product ugprade from 9.1.0.2 to 11g
Hi All,
We have received following error during product upgrade from 9.1.0.2 to 11g.
Error occurred during fourth step ( Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema)
On the screen while running upgrade assistance (ua.bat)
Following message came on screen.
Schema Version registry >> succeeded
Oracle Identity Manager Schema Upgrade >> Failed
I could see only following error in the log file.
\middleware_home\Oracle_IDM1/server/db/oim/oracle/Upgrade/Oracle_upg_91_92_x2ell_92.sql
[2012-06-28T09:34:51.147-06:00] [FrameworkMR] [NOTIFICATION] [] [upgrade.FrameworkMR] [tid: 14] [ecid: 0000JWnikOB6qIvyKWYBSQ1Fv7Zd000005,0] finalize() instance 1 of 2
[2012-06-28T09:35:00.863-06:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM] [tid: 13] [ecid: 0000JWnijRj6qIvyKWYBSQ1Fv7Zd000004,0] UPGCMP-00924: SQL error [{0}]
[2012-06-28T09:35:00.863-06:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM] [tid: 13] [ecid: 0000JWnijRj6qIvyKWYBSQ1Fv7Zd000004,0] [[
java.sql.SQLSyntaxErrorException: ORA-00955: name is already used by an existing object
ORA-06512: at line 31
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:2123)
at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:2067)
at oracle.jdbc.driver.OracleStatementWrapper.executeUpdate(OracleStatementWrapper.java:306)
at oracle.ias.mrua.plugin.oim.SchemaUpgrader.loadScript(SchemaUpgrader.java:303)
at oracle.ias.mrua.plugin.oim.SchemaUpgrader.doUpgrade(SchemaUpgrader.java:139)
at oracle.ias.mrua.plugin.oim.OIMSchemaUpgradePlugin.doUpgrade(OIMSchemaUpgradePlugin.java:302)
at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3672)
at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2448)
at oracle.ias.mrua.MRUA.driver(MRUA.java:1710)
at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)
Any Idea ?
RituHi All,
We are also trying to upgrade OIM 9.1.0.2 which is present in our environment to OIM11g. Request your help.
Now how do we achieve the upgrade? Should my source of OIM9i software and target of OIM 11g software be installed on the same server?
I did install OIM11g and OIM9i on the same server and tried to do schema upgrade based on the link:
Upgrading Oracle Identity Manager Environment
But during examine phase I get error the below error
UPGAST 00091- ERROR DURING EXAMINE OF COMPONENETS
UPGAST 01004- UPGRADE IS UNABLE TO DYNAMICALLY LOAD COMPONENET SPECIFIC SOFTWARE MODULES.
When i check in the log in internet it says :
Cause: Repository upgrade framework was unable to dynamically load the Java classes of its component-specific software modules. mrua.xml file might have been corrupted.
Action: This is an internal error. Verify that the Java classpath has been correctly set, the mrua.xml file is correct, and that the .jar files for all component-specific software modules are present in the jlib directory. Contact Oracle Support Services for assistance
What is the javaclasspath to be set?how to check if mrua.xml and jar files are fine
Pls help.Any help is much appreciated. -
Failed to run TS: SAP GUI 720 EN x64
We have several machines failed to run TS: SAP GUI 720 EN x64
Here's the smsts.log
Failed to run the action: TaskSequence Failed.
The operation completed successfully. (Error: 00000000; Source: Windows) TSManager 12/9/2013 12:33:50 PM 5020 (0x139C)
Sending status message . . . TSManager 12/9/2013 12:33:50 PM 5020 (0x139C)
Send a task execution status message SMS_TSExecution_ActionFailError TSManager 12/9/2013 12:33:50 PM 5020 (0x139C)
Formatted header: TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:5f93786e-447b-4ba1-baad-da6a065d09d0</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2013-12-09T17:33:51Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="2674"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Clear local default environment TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Let the parent group (If INI not exist) decides whether to continue execution TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Let the parent group (SAP GUI 7.20Bit64 EN) decide whether to continue execution TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
The execution of the group (SAP GUI 7.20Bit64 EN) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Failed to run the last action: TaskSequence Failed. Execution of task sequence failed.
The operation completed successfully. (Error: 00000000; Source: Windows) TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Sending status message . . . TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Send a task execution status message SMS_TSExecution_TaskSequenceFailError TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Formatted header: TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:5f93786e-447b-4ba1-baad-da6a065d09d0</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2013-12-09T17:33:51Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="2094"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Task Sequence Engine failed! Code: enExecutionFail TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
**************************************************************************** TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Task sequence execution failed with error code 80004005 TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Cleaning Up. Removing Authenticator TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Cleaning up task sequence folder TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Successfully unregistered Task Sequencing Environment COM Interface. TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Executing command line: "C:\Windows\SysWOW64\CCM\TsProgressUI.exe" /Unregister TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Don't see useful information in execmgr.log, etc.
Anyone can tell what's the problem? Anyother information, you need?Hi
thanks for the replies.
I did check the issues:
Yes, the saprule.xml file is availabe in the install-folder.
I did check the MSXML and it is installed. However, I reinstalled it with the package from the compilation CD
..but, still the same error!
Anything it could be? Perhaps some false registry entry etc.?
Regards
bivision -
Error during start instance phase
Dear all,
I am getting an error during start instance phase of netweaver 7.0 installing.I am using windows server 2008 and mssql.
The error is "instance ecd\dvebmgs00 reached state shutdown after having state starting.giving up".I searched a lot but still error
is not solved.so please tell me how to solve this error.dev_disp:
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid ECD
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 32
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 3228
Mon Mar 17 11:04:13 2014
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3228) [dpxxdisp.c 1286]
shared lib "dw_xml.dll" version 32 successfully loaded
shared lib "dw_xtc.dll" version 32 successfully loaded
shared lib "dw_stl.dll" version 32 successfully loaded
shared lib "dw_gui.dll" version 32 successfully loaded
shared lib "dw_mdm.dll" version 32 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Mar 17 11:04:19 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPdev01_ECD_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000008DC0050, size: 6614144)
DpShMCreate: allocated sys_adm at 0000000008DC0050
DpShMCreate: allocated wp_adm at 0000000008DC2270
DpShMCreate: allocated tm_adm_list at 0000000008DC96D0
DpShMCreate: allocated tm_adm at 0000000008DC9730
DpShMCreate: allocated wp_ca_adm at 000000000936CFB0
DpShMCreate: allocated appc_ca_adm at 0000000009372DB0
DpShMCreate: allocated comm_adm at 0000000009374CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000093FB980
DpShMCreate: allocated gw_adm at 00000000093FBA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000093FBA30
DpShMCreate: allocated wall_adm at 00000000093FBA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1018 blocks reserved for free list.
ES initialized.
Mon Mar 17 11:04:20 2014
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1681]
***LOG Q0K=> DpMsAttach, mscon ( SAPdev01) [dpxxdisp.c 12483]
Mon Mar 17 11:04:21 2014
DpStartStopMsg: send start message (myname is >SAPdev01_ECD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Mar 17 11:04:22 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 32
Release check o.K.
Mon Mar 17 11:05:01 2014
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:11 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Mar 17 05:35:11 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3440 Ended no 1 0 0
1 DIA 3448 Ended no 1 0 0
2 DIA 3456 Ended no 1 0 0
3 DIA 3468 Ended no 1 0 0
4 DIA 3476 Ended no 1 0 0
5 DIA 3484 Ended no 1 0 0
6 DIA 3492 Ended no 1 0 0
7 DIA 3500 Ended no 1 0 0
8 DIA 3508 Ended no 1 0 0
9 DIA 3516 Ended no 1 0 0
10 UPD 3524 Ended no 1 0 0
11 ENQ 3532 Ended no 1 0 0
12 BTC 3540 Ended no 1 0 0
13 BTC 3548 Ended no 1 0 0
14 BTC 3556 Ended no 1 0 0
15 SPO 3564 Ended no 1 0 0
16 UP2 3572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Mar 17 05:35:11 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 4 ( 50%), shm 4 ( 50%)
since last update total 8, udp 4 ( 50%), shm 4 ( 50%)
Dump of tm_adm structure: Mon Mar 17 05:35:11 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Mar 17 05:35:11 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:16 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPdev01_ECD_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3424) (SOFT_KILL)
Stop icman
killing process (3432) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3424 HANDLE:776)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:17 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3424 HANDLE:776)
wait for end of icman
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:18 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:19 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:20 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:21 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:22 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:23 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:24 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:25 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:26 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:27 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:28 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3432 HANDLE:784)
DpStartStopMsg: send stop message (myname is >SAPdev01_ECD_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPdev01_ECD_00 , sapsysnr= 0, hostname=SAPdev01
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Mar 17 11:05:29 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12829]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 772 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 772 (pos=2)
SiSelNRemove: removed sock 772
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 772
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3228) [dpxxdisp.c 11045]
Good Bye .....
dev_ms:
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2596] Sun Mar 16 17:31:39 2014
[Thr 2596] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 4004
[Thr 2596] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4004) [msxxserv.c 1853]
[Thr 2596] load acl file = E:\usr\sap\ECD\SYS\global\ms_acl_info.DAT
[Thr 2596] MsGetOwnIpAddr: my host addresses are :
[Thr 2596] 1 : [192.168.42.205] SAPdev01 (HOSTNAME)
[Thr 2596] 2 : [127.0.0.1] SAPdev01 (LOCALHOST)
[Thr 2596] 3 : [169.254.221.8] SAPdev01 (NILIST)
[Thr 2596] MsHttpInit: full qualified hostname = SAPdev01
[Thr 2596] HTTP logging is switch off
[Thr 2596] set HTTP state to LISTEN
[Thr 2596] ms/icf_info_server : deleted
[Thr 2596] *** I listen to port sapmsECD (3600) ***
[Thr 2596] *** I listen to internal port 3900 (3900) ***
[Thr 2596] *** HTTP port 8100 state LISTEN ***
[Thr 2596] CUSTOMER KEY: >J0169343196<
[Thr 2596] build version=701.2008.03.06
[Thr 2596] Sun Mar 16 17:32:52 2014
[Thr 2596] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from SAPdev01_ECD_00 [msxxserv.c 4711]
[Thr 3648] Sun Mar 16 17:39:27 2014
[Thr 3648] MsSExit: received SIGINT (2)
[Thr 3648] ***LOG Q02=> MsSHalt, MSStop (Msg Server 4004) [msxxserv.c 6021]
dev_w0:
trc file: "dev_w0", trc level: 1, release: "701"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Sun Mar 16 17:31:45 2014
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.31)
B New connection 0 created
M sysno 00
M sid ECD
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3256
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3256) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000AA00050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000AA00050
M DpShMCreate: allocated wp_adm at 000000000AA02270
M DpShMCreate: allocated tm_adm_list at 000000000AA096D0
M DpShMCreate: allocated tm_adm at 000000000AA09730
M DpShMCreate: allocated wp_ca_adm at 000000000AFACFB0
M DpShMCreate: allocated appc_ca_adm at 000000000AFB2DB0
M DpShMCreate: allocated comm_adm at 000000000AFB4CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B03B980
M DpShMCreate: allocated gw_adm at 000000000B03BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B03BA30
M DpShMCreate: allocated wall_adm at 000000000B03BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host SAPdev01
M calling db_connect ...
C Callback functions for dynamic profile parameter registered
C Thread ID:2876
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 31
C patchcomment Handle long parameters as LOBs (1296540)
C Local connection used on SAPDEV01 to named instance: lpc:SAPDEV01\ECD
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (0) [IM006] [Microsoft][SQL Server Native Client 10.0]Packet size change not supported by server, default used
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C Connection 0 failed using Driver={SQL Server Native Client 10.0};Server=SAPDEV01\ECD;AutoTranslate=no;Trusted_Connection=yes;WSID=SAPDEV01;APP=R3D00 comm rd ODBC;Database=ECD;
C
B ***LOG BY2=> sql error 18456 performing CON [dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error 18456 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 3256
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPdev01_ECD_00 on host SAPdev01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sun Mar 16 17:31:45 2014
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3256) [dpnttool.c 334] -
EHP4 error during Roadmap 2 (Extraction) of SAPehpi
received the following error during Roadmap 2 (Extraction) of SAPehpi for EHP4
Checks after phase PREP_IMPORT/RUN_GENPUTTBSHD were negative!
Last error code set: BATCH JOB RS_GENERATE_PUTTB_SHD FAILED: Error(s) found in the log(s), accumulated in "RSPTBINI.ELG".
SAPehpiConsole.log states:
>> 2009/06/10 13:49:43 START OF PHASE PREP_IMPORT/RUN_GENPUTTBSHD
Starting of PUTTB_SHD generation in batch (job RS_GENERATE_PUTTB_SHD)
working ...
>> 2009/06/10 13:51:59 END OF PHASE PREP_IMPORT/RUN_GENPUTTBSHD
>>>> Repeat Phase <<<<
Checks after phase PREP_IMPORT/RUN_GENPUTTBSHD were negative!
Last error code set: BATCH JOB RS_GENERATE_PUTTB_SHD FAILED: Error(s) found in
the log(s), accumulated in "RSPTBINI.ELG".
01) * Repeat phase RUN_GENPUTTBSHD to continue at the point it stopped
02) - Exit this program
Choose action: Repeat phase RUN_GENPUTTBSHD to continue at the point it stopped
>> 2009/06/10 13:55:06 START OF PHASE PREP_IMPORT/RUN_GENPUTTBSHD
Starting of PUTTB_SHD generation in batch (job RS_GENERATE_PUTTB_SHD)
working ...
>> 2009/06/10 13:57:00 END OF PHASE PREP_IMPORT/RUN_GENPUTTBSHDSAPehpichk.log states the following.
************************* SAPehpi started in PREPARE mode *************************
This is SAPehpi version 7.10/2 patch level 26.001 compile time 18:09:10 May 23 2009.
This is UNICODE SAPehpi!
Running in graphics mode server.
GUI reports feature 'dialogue' as 'enabled' level 1, user said 'unknown'.
GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
GUI reports feature 'progress' as 'enabled' level 1, user said 'unknown'.
GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
GUI reports feature 'remotecontrol' as 'enabled' level 1, user said 'unknown'.
GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
GUI reports feature 'mid' as 'enabled' level 2, user said 'unknown'.
GUI reports feature 'evaluation' as 'unknown' level 0, user said 'unknown'.
Reading Parameter File "/sapepi/EHPI/abap/bin/DBSYNC.PAR" at 20090611081134
Reading Parameter File "/sapepi/EHPI/abap/bin/TRATTR.LST" at 20090611081134
Reading Parameter File "/sapepi/EHPI/abap/bin/TRGROUP.LST" at 20090611081134
DB-functions initialized for 'ORACLE'.
Reading Parameter File "/sapepi/EHPI/abap/bin/DBSWTC.PAR" at 20090611081134
Current unit is 'EXTRACT', next unit is 'EXTRACT'.
-> decided to continue with unit EXTRACT.
...begin dialogue at 20090611081134
...end dialogue at 20090611081148
..answered at 20090611081148.
-> decided to try again.
Execution of PREPARE module "Import" begins at 20090611081148
CURRENTPHASE PREP_IMPORT/RUN_GENPUTTBSHD
...started at 20090611081148
Using phase log file 'RSPTBINI.LOG'.
Reading Parameter File "/sapepi/EHPI/abap/bin/DEFAULT.TP0" at 20090611081431
..times self: 0.200000/0.100000 usr/sys, children 0.140000/0.200000 usr/sys.
..finished at 20090611081433 with status SINGLE ERRORS FOUND.
Error message set: 'BATCH JOB RS_GENERATE_PUTTB_SHD FAILED: Error(s) found in the log(s), accumulated in "RSPTBINI.ELG".'
...begin dialogue at 20090611081433
...end dialogue at 20090611081453
..answered at 20090611081453.
-> decided to try again.
Batch job RS_GENERATE_PUTTB_SHD has a status of Finished (green) when viewed in sm37.
06/11/2009 08:11:51 Job started 00 516 S
06/11/2009 08:11:51 Step 001 started (program RS_GENERATE_PUTTB_SHD, variant SAP_TMPLOG, user ID DDIC) 00 550 S
06/11/2009 08:14:30 Job finished 00 517 S
Here is the contents of RSPTBINI.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PUTTB_SHD generation ERRORS and RETURN CODE in RS_GENERATE_PUTTB_SHD.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3EETG471 Unable to determine package for table "D010SINF""TTREE"
I'm also confident that this system has enought mem. = 4G -
Hii Team,
Please find the product details for your need full:-
Product number: F6C57PA#ACJ
Product: HP ENVY TouchSmart 15-j109tx Notebook PC (ENERGY STAR)
Issue- recovery attempt has failed select one of the three buttons.
Below is the error log in the notepad:-
[13:34:51.78] ChkErrBB.CMD : Detect some error during PININST_BBV.
[13:34:51.78] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[13:34:51.78] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
Tss to isolate the issue:- Bios updated no go, bios defaults no go, checked with another set of rcds but same issue on the fourth discs on different dvd's also.
RCD kit Part#:-
749548-D62
749549-D62
749550-D62
752228-B22
Error Comes at recovery dvd:- 752228-B22.
HP Experts kindly intervene with the case for a way out from the issue asap.This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
Please see HP Forum thread Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults;
1) Boot computer – immediately click / press F10 to get into the BIOS Manager.
2) Press F9 to set the BIOS to factory default.
3) Press F10 to "Save and Exit"
4) Redo the Recovery – remember to leave the wireless light “on” during the Recovery
Other thing to try: don't use the supplemental disc... set the system date in BIOS to 2012... run "Minimized Recovery" instead of "Factory Reset"
I currently have the same issue with my HP 15t-j100 CTO and HP 13 Split x2 (both on loan from HP). I have tried various fixes/solutions posted on the forum, but haven't been successful in recovering my computers. In both cases I an using a USB Flash Drive set up as HP Recovery Media. It appears you are using an external CD/DVD drive and 4 DVDs as your HP Recovery Media. My computers display a "Restoration Incomplete" dialog box and CTOERROR.flg displays;
Please contact HP in your country / region, via the HP Worldwide Support Portal, for official HP assistance.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Maybe you are looking for
-
How Do I Use my MacBook Pro to Watch a DVD From External DVD Player
Hello Everyone! While waiting for Apple TV to become available in my place of work, I want to use my MacBook Pro monitor for watching a DVD movie played on an external DVD player. The DVD player I have is an LPC-D1000, which is a new model. While Mac
-
I am trying to install iTunes 10.7. The installation gets all the way to the end and says "removing application" then stops and gives me an error message that states there is a missing file and it cannot complete the configuration. Please contact m
-
Simple Select query with 'where', 'and', 'between' clauses takes time
Hi, I have a select query as below SELECT * FROM (SELECT a.*,ROWNUM currentStartRecord From (select ai_inbound.ai_inb_seq tableseq,'AI_INBOUND' tablename,'INBOUND' direction,ai_inbound.appl,ai_inbound.ai_date datetime,ai_inbound.ic_receiver_id pg_id,
-
Is there any iBooks Author developer out there for hire? I am planning to develop a children picture book ibooks-author ibook and I need someone to help create it. Please let me know if interested.....
-
I need to know how to move my songs from my ipod to my library. A while ago i cleaned my computer and didn't save the music files on my computer. Now i have them on my ipod and not on my library. Im about to sell my ipod with click wheel but don't wa