Error during maintaining schedule lines in ME38

Dear All ,
           While I am trying to add schedule lines in ME38 for a schedule agreement system is giving error message
"Message no. 06 881.   The vendor is blocked by Quality Management for this material as from the date shown."
           Plz let me know the reasons for this .
Regards
Abhijit Das

hi,
check few things:
1. check whether you are doing the del schedule only on the given dates in the shedule agreement...
2. check whether the material is blocked in the source list...check the validity dates also...
Hope it helps..
Regards
Priyanka.P

Similar Messages

Same MM schedule lines in ME38

Hello All Gurus,
I have a material 232545 and the supplier for this material is 192839. This vendor supplies 378PC/BOX of the given material. Now, my client's requirement is that the MM schedule lines in ME38 should show 378PCs each for all the schedule lines. No matter how much Forecast/JIT schedules are maintained in SD scheduling agreement, whenever MRP is run, the MM schedule lines should show 378 PC per each line. If there are 10 MM schedule lines in the MM scheduling agreement of the material 232545, the ten scheduling lines should show 378PCs 10 times.
I hope I am clear with my requirement. I tried a lot to replicate this scenario in SAP but to no avail. Hence, I am putting up this message in SDN. If anyone of you know how to solve this issue, please let me know. I will be really thankful to you.
Thanks and Regards,
Umakanth

hi,
check few things:
1. check whether you are doing the del schedule only on the given dates in the shedule agreement...
2. check whether the material is blocked in the source list...check the validity dates also...
Hope it helps..
Regards
Priyanka.P

Error in creating schedule line aggrement through BAPI

Hi All ,
I want to create schedule line aggrement (VA31) by using BAPI / FM .
I am using " SD_SALESDOCUMENT_CREATE" FM .
Here i am getting error in output when i enter shchedle line data in input .
Error is given below .
E V1 434 No schedule line category could be determined during quantity adjustment
Error only come when i want to create new schedule line ....in Changing any schedule line aggrement there is no error .
I am able to create schedule line aggrement manually .
please help .

Use BAPI_SAG_CREATE

GR not in the Sequence of the schedule lines in ME38

Hi All,
In ME38, sch lines will be updated with GR qty when GR is done and open qty field gets reduced. When I have multiple sch lines, the GR qty update is not happening sequentially. I.e, If I have 10 sch lines for one Sch Agmt and for first 3 GRs, initial 3 sch lines got updated sequentially and for 4th GR, say 6th sch line is getting updated even though 4th sch line has enough qty corresponding to 4th GR.
Whats the logic that system applies when updating GR qty in ME38.
Appreciate your help.
Thanks

Hi,
The schedule line update will depende on delivery date. The delivery date of 6th might be earlier than the the 4th schedule.Thanking you.

BAPI for schedule lines creation ME38

Hi All,
Currently i am working in 4.6C version. Could you please let me know is there any BAPI available for schedule lines creation (Transaction is ME38).
Regards,
Hari.

Hi,
Check with below link.
[Link1|BAPIs for ME38 transaction;
Thanks,
Asit Purbey.

BAPI for Maintain Scheduling line agreement

Dear ABAPer,
I am using SAP version ECC 5.0. I want to develop Change Scheduling line agreement enhancement.
my requirement is, any BAPI is there for the same.
if you have any idea, please help me.
thanx.
with best regards,
Velmurugan.S

Hi ,
      Hope it helps.
Maintenance of Scheduling Agreement Delivery Schedule Lines
BAPI_SCHEDULE_MAINTAIN
The BAPI_SCHEDULE_MAINTAIN is used to create or change scheduling agreement delivery schedule lines.
The parameter PURCHASEDOCUMENT and the scheduling (delivery schedule line) data in POSCHEDULE and POSCHEDULEX are to be passed on to the interface. These three parameters are defined as mandatory.
IMPORT
Extensionin
ScComponentX
ScheduleX
TechnicalData
TestRun
EXPORT
ExpHeader
Extensionout
return
Changing
ScComponent
Schedule
CALL FUNCTION 'BAPI_SCHEDULE_MAINTAIN'
EXPORTING
    PURCHASINGDOCUMENT       =
"   TESTRUN                  =
"   TECHNICAL_DATA           =
" IMPORTING
"   EXP_HEADER               =
TABLES
    SCHEDULE                 =
    SCHEDULEX                =
"   SC_COMPONENT             =
"   SC_COMPONENTX            =
"   EXTENSIONIN              =
"   EXTENSIONOUT             =
"   RETURN                   =
Thanks,
Rajesh

Maintain schedule line Category

Hello,
Could you please advise on following:
Example:
I have a delivery date for example 06.08.2012 and choose the Schedule line cat. Y1 the delivery date in purchase req remains the same 06.08.2012, but when i choose Y2 the date is becoming 05.08.2012.
I have checked the schedule line category definition T-Code: VOV6 for Y2 the P.req.del.sched (Purchase requisition with delivery scheduling) is selected.
Could you please advise if this is a reason and how the date is calculated. I mean were are the setting. I thing there should be somwhere one day and zero but cannot find it.
Regard.
M.

Hello,
The problem I have is that when i change the schedule line categorry from Y1 to Y2 or create the SO with schedule line category Y2 the delivery date in PR which is created while creating SO (Purchase-To-Order SO) is
one day back.
Example: schedule line cat Y1
Delivery date in SO is 06.07.2012 delivery date in PR 06.07.2012 fine for me.
But
schedule line cat Y2
Delivery date in SO is 06.07.2012 delivery date in PR is 05.07.2012 one way back, not fine for me, I would like it to be the same like it is in Y1 so 06.07.2012 not 05.07.2012.
Can you advise where are the settings ??
Thank you in advance
if you need more information please let me know.
m.

SSTemplate.xlt Error during 'Maintain Dimension Member' in BPC Admin

Hi,
While trying to 'maintain dimension member' in BPC administrator (BPC 7.0 Netweaver version) for a dimension,I get error message that 'C:\...Temp\SSTemplate.xlt' file could not be found.
Due to this I am unable to maintain members for any dimension.
If anyone has faced this issue and resolved it,could you please me out?
Thanks in advance,
Rinal

Dear Rinal Parmar,
I think that the dimension file which you mean is lose from the directory(the directory which you installed the SAP BPC). If you've backup the Appset before, please you find the dimensian file (.xlt) which is lose in the backup directory. After that, you copy paste into the exactly directory (the directory which you installed the SAP BPC). Then, You should process dimension and process application again.
Thanks,
Wandi

Error during Maintain Source List

Hi Experts,
I am getting error while creating Source as below,
"Source list for the material XXXXX and plant XXXX already being processed "
Please suggest the what needs to be done.
Regards
Sham

Hi,
I did the still the same eror,
One observation is in ME03, when i execute after enetering material and plant, the line items are blank.
Will this help you in analysing further?
Regards
Sham

Error during the scheduling of splits

The long text saying that the person might be not available.
But how is it possible to get an overview of the personal assignments to check if person is available or not?

Check the person assignment in work center whether it is expired. Also check the whether the perosn is overloaded in report CMP9.
Regards,
Mahendra

Without release schedule agreement schedule lines should not be maintain

Hi experts,
i made a schedule agreement and i have given 2 level of releases for it.. so with out releasing i maintained schedule lines in me38, then i made migo then system says the document has not been released yet. but what my query is schedule lines should not be happened with out release means it should stop here only. So how to give check for it.i have searched in system messages but nothing is there in that. So please solve this problem its urgent.

Hello,
I have the same problem as you. Someone know something about it?
kanyadhara, did yo solve this problem?
Thanks a lot

S.A. schedule lines problem

We are creating schedule lines for scheduling agreement through MRP. We mainatain source list validity from 01-02-2009 to 31-12-2010. If we maintain schedule lines with ME38 beyond 31-12-2010, it is giving error. But if schedule lines are created through MRP even we are able to create schedule lines after the year 2011. How do we stop MRP generating schedule lines beyond souce list validty? any suggestions?

Hi Szabo,
Thanks for the quick reply. I have gone through the notes. But they are not resolving my problem. In our case we are getting error 06-722 when we create schedule lines manually wihth ME38. We want the same error if schedule lines are generated through MRP. any config or customisation available for this?
thanks in advance
Any suggestins on above issue?
thanks in advance
Edited by: chintu dkl on Sep 21, 2010 7:01 PM

Change in scheduling agreement schedule lines .

Dear All ,
        We have activated release strategy for scheduling agreement .Previously while maintaining schedule lines it was not going for release .
         But now while maintaining schedule lines in ME38 it is going for release .I want to know what is the reason and I want to stop this .
         We have made some changes in Closed PO amendment ,like we have changed the release indicator value R -6- 10% to R - 6 -0% .
Like whenever we make change in price of a PO even a 1paise
it should go for release .
          The release strategy for SA and PO is same .

Hi,
Since you have changed the release indicator it is again going for release for any change.
Please change the release indicator to 2 from 6 so that you can change the schdeule lines or any modiifcation again release will not set
Please check the release indicator in P.O and SA
G.Ganesh Kuamr

Viewing Target Quantity in Scheduling Agreement Schedule Lines

Hi Experts,
Can I view the Target Quantity in the Scheduling Agreement Line Item in the Schedule Lines Screen?
Thanks for all suggestions

After maintaining Schedule lines in ME38,click on the line and details button on the top of the screen,Here you will get Target
quantity and open Target quantity.

MIGO for schedule lines against total released quantity

Hi Gurus,
Is there any standard solution (or user exit) available, so that MIGO can be performed against total released quantity of schedule lines (Scheduling Agreement) in ME84?
Currently, MIGO can only be performed once the "Proposed All Item" is ticked, and the quantity proposed is blanked.
Thanks in advance.

Hello,
Yes I have created Scheduling agreement and maintain schedule lines with ME38 and also release schedule lines with ME84 transaction.
I'm able to do GR, but I wonder if it possible to see all relevant (not yet received) schedule lines (as you can see in ME38 transaction with delicery date) in MIGO transaction? Now I can only see quantity summary of the schedule lines, which are not yet received.
Regards,
jaana

Error during maintaining schedule lines in ME38

Similar Messages

Maybe you are looking for