Error during printing.

I seem to have a weird error. Whenever I print system reports or preview them on the server it works just fine but if I go to print them or preview them on a terminal server I get an error. When I go to print I get the error "Error during printing; ensure all parameters are defined". When I preview them I get asked for the database login. I've put in the correct login and tried integrated security to no avail. I have looked at the self help application and tried both Case 1 and Case 2 under Environmental issue and I've done the Appendix. I have never seen had this problem before. Any suggestions?
SAP Version: 8.81 PL10
Server OS: Windows 2008 R2
SQL Server: 2008 R2
Terminal Server OS: Windows 2003

This problem is due to mismatch between too servers. You may have to modify registration keys to make is work.
Search (x86) in registry and/or user profile to find all Crystal Report related entries on the Terminal Server to correct.

Similar Messages

Error during print request output. l_rc = 1

Hi ,
I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
I am using control set to copy file at desired location on server
COPY &F <path for file to be copied>&T
File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
Complete log is below:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
1 file(s) copied.
End of message
Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 29343
Request name SCRIPT ZRAJ BASISADMIN
Client 220
Owner BASISADMIN
Request attributes
Time created   2008102906203900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device ZRAJ
Default no. copies 1
Format X_PAPER
Main print request characteristics
Spool request number 29343
Print request number 1
Print request attributes
Time created   2008102906203900
Output device ZRAJ
Format X_PAPER
Character converter active when first problem occurred
No information available
Pls help.
Regards
Raj Kiran

If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
so do a search in SCN before posting your question.
Regards
Karthik D

Error printing Check - "Missing Parameter Values. Error During Printing"

Dear friends,
Our client is in SAP B1 8.81 Pl07 and is facing an error while printing checks designed in Crystal Reports. As soon as they click on "Print" button, we are getting an error "Missing Parameter Values. Error During Printing".
We have checked the Crystal Reports and all the parameters are given.
Can anyone help me regarding this?
Thanks and regards,
Bharath S

hi,
Quoted from Note 1555170
1555170 - Error 'Missing parameter values' printing with CR layout
Symptom
When you print on add any stock transactions document, with Crystal report layout, you receive error message:'Missing parameter values' and then 'Error during the printing; ensure all parameters are defined'
Step by Step scenario:
1.Go to Administration / System Initialization / Print preferences and select the tab per document.
2.Select the document stock transfer and tick the box print document when adding document and click on update.
3.Go to stock management / stock transactions / stock transfer
set the Crystal report template as default.
Note:
- The issue is reproduced also for Goods Receipt and Good Issue.
- The issue is reporduced with any Crystal Report Template for the     above documents.
Cause
Program error
Solution
This issue is candidate for a change in a future release of SAP Business One.
Workarounds:
1.Use PLD for printing the stock transactions.
2.Convert the PLD layout to Crystal reports with Crystal converter.
3.Print the document after adding it.
Other terms
sap business one, printing issues, good issue, good receipt, stock transfer, crystal report, print preferences, print when adding, dockey, missing parameter
Header Data
Released on     07.02.2011 13:27:30
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with low priority
Category     Program error
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
8.81
you can download the PLD to Crystal Converter [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71]
regards,
Fidel

Error during printing: Ensure all parameters are defined

Forum,
I have the following issue on 8.81 PL08. When trying trying to print from the Outgoing Payment screen we get the following message: Error during printing: Ensure all parameters are defined.
What parameters specifically would it be referring to?
Regards,
Juan

Hi,
IS the error occurred only in outgoing payment? or what changes have you done?
Try to create new PLD copy from system PLD then edit the field.
Everytime you inserted a fields try to run the PLD so that we can determine the problem.
Thanks.
Clint

Logon failed. Details: mscorlib (Crystal report error during print &export)

Hi,
I'm encountering the problem that the crystal report is working fine in the staging server I developed.
However, after I transported to live server the report having problems when printing and exporting.
Below is the error message prompts to me.
Logon failed. Details: mscorlib : Could not find file 'C:\Inetpub\wwwroot\rptPrintSummaryConfineSpace.xml'. Error in File C:\WINDOWS\TEMP\rptPrintSummaryConfineSpace {2D72226E-816A-4D9B-BF93-C9077001F09C}.rpt: Unable to connect: incorrect log on parameters.
I hit this error when I click OK button on export or print option page.
My temp folder at windows is given full permission for IIS_WPG and ASPUSER.
Please help to resolve my problem thank you very much.

What version of Crystal Reports?
What CR Service Pack are you on?
What is the database?
How are you connecting to the databse (ODBC, OLE DB, etc.)?
- Ludek

Error during print a Sales order

Hello SAP Gurus,
While the user is trying to print an Order through Tcode VL10, he is getting an error message - "order is incomplete you cant save".
Thanks
Sha

is it possible to print an order by using tcode u2013 VL10
Certainly no. You can take print of sale orders via Program RSNAST00
thanks
G. Lakshmipathi

Can't print - "Error during printing"

All test pages are printed OK, but I can't print from any app all of a sudden. Re-installing the driver didn't help.
Canon IP4300
Thank you for some advice!

Peter R. wrote:
What did you mean by "resetting the print system"?
Open Print & Fax Prefs and control-click in the list of printers. That will bring up the contextual menu to reset the printing system.
I found one suspicious log entry:
localhost - - [24/Nov/2010:16:22:36 +0100] "POST /printers/Canon_iP4300 HTTP/1.1" 200 2235 Create-Job successful-ok
localhost - - [24/Nov/2010:16:22:36 +0100] "POST /printers/Canon_iP4300 HTTP/1.1" 200 32609 Send-Document client-error-document-format-not-supported
localhost - - [24/Nov/2010:16:22:36 +0100] "POST /jobs/ HTTP/1.1" 200 172 Cancel-Job successful-ok
localhost - - [24/Nov/2010:16:26:13 +0100] "POST /printers/Canon_iP4300 HTTP/1.1" 200 2235 Create-Job successful-ok
localhost - - [24/Nov/2010:16:26:13 +0100] "POST /printers/Canon_iP4300 HTTP/1.1" 200 32610 Send-Document client-error-document-format-not-supported
localhost - - [24/Nov/2010:16:26:13 +0100] "POST /jobs/ HTTP/1.1" 200 172 Cancel-Job successful-ok
</string>
Is that of any use?
Thank you for including this. What type of document were you printing?
Message was edited by: John Blanchard1

Error during Print preview

Hello everyone,
I get this error "Database disconnected, Choose the 'ok' button to exit the database" on several workstations. This does not happen on the server at all. It happens when we are trying to preview a sales order, purchase order or a production order. This system shows this message and shuts down. this also happens when I click on the print layout manager. I have reinstalled SAP several times but the issues still continues to show up. This happens on SAP 8.82 patch level 14.
I would really appreciate if any one has a solution to this problem.
Thank you
Chintan

Hello,
The error message SSFCOMPOSER002 indicates 'No runtime object exists for form '. I just want to confirm the below point:
In Quality,
could you please go to the transaction code - 'SMARTFORMS' and give the smartform name ?
Then, execute the form directly and check whether you are getting the interface program name.
If any issues is there, then re-transport the smartform once again (please do not forget to activate the smartform once again before assigning to the new TR) to the quality.
Kindly tell me if the issue is some other.
Regards,
Selva K.

Unhandled COMException Message: No Error. during printing some reports, extend Exception Info

Hi,
i'm using Crystal Reports for VS version 13.0.13.1597 with Visual Studio 2013
Unfortunately I get a COMExeption when trying to Print some reports after previously displaying a preview using the CrystalDecisions.Windows.Forms.CrystalReportViewer Component.
System.Runtime.InteropServices.COMException was unhandled by user code
HResult=-2147483648
Message=
No Error.
Source=rptcontrollers.dll
ErrorCode=-2147483648
StackTrace:
       at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetPage(PageRequestContext pPageRequestContext)
       at CrystalDecisions.ReportSource.EromReportSourceBase.GetPage(PageRequestContext pageReqContext)
       at CrystalDecisions.CrystalReports.Engine.FormatEngine.QueryPageSettingsEventHandler(Object sender, QueryPageSettingsEventArgs e)
       at System.Drawing.Printing.PrintDocument.OnQueryPageSettings(QueryPageSettingsEventArgs e)
       at System.Drawing.Printing.PrintDocument._OnQueryPageSettings(QueryPageSettingsEventArgs e)
       at System.Drawing.Printing.PrintController.PrintLoop(PrintDocument document)
       at System.Drawing.Printing.PrintController.Print(PrintDocument document)
       at System.Drawing.Printing.PrintDocument.Print()
       at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(PrinterSettings printerSettings, PageSettings pageSettings, PrintLayoutSettings layoutSettings, Boolean reformatReportPageSettings)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(PrinterSettings printerSettings, PageSettings pageSettings, PrintLayoutSettings layoutSettings, Boolean reformatReportPageSettings)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(PrinterSettings printerSettings, PageSettings pageSettings, Boolean reformatReportPageSettings)
       at Soloplan.CarLo.Printing.PrintAdapterCrystalReports2011.Print() in c:\project.net\Soloplan\CarLo\Printing\PrintAdapterCrystalReports2011.cs:Line 1528.
InnerException:
As you can see the error message is a bit short on information what went wrong, especially the Message: No Error.
Is there any possiblity to extend the information on this exception?
The behavior is reproducible with some reports, while others work just fine, and even with the problematic reports it only when the call of the Print function is done while the preview is shown.
I hope someone can point me in the right direction.
Thanks
Johannes

Wow. It's been a long, long time since I've seen CR throw error: no error (like v. 4.5 or so...). Used to chuckle about it - I think I even saved a screenshot of it
It will be good to have more info on this:
Win or web app?
Printer used.
Printer driver name and version.
The reports that do not work throw the error consistently?
Code used to print the reports.
Is this a threaded app?
Do you get the issue printing from the viewer?
Do you get the issue printing from the designer viewer?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

My HP OfficeJetPro K8600 keeps going to error during printing. How can I cure this?

HP OfficeJetPro K8600 keeps going to "error" when trying to print from Windows 7. Error came up the same with old computer using Windows XP.

It is connected wirelessly. The other printer was connected with a USB. Getting it to print again---usually by just turning printer off and back on again. This usually results in getting 1 page printed. Then I have to do it again. I have deleted printer and reinstalled. I have changed IP from automatic to manual. I unplugged printer for a short time (1-2 minutes) and plugged back in. I have restarted both IMAC and printer after each process. This is really frustrating and time consuming, driving me nuts.

Crystal Report print layout error during print preview

Hi Everyone,
When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password.
When putting in the correct password, the login fails.
When I click cancel, SAP hangs up and requires a restart.
All print layouts were done in Crystal Reports, and imported via the report layout manager.
This occurs on all marketing documents where there is a crystal print layout.
Anyone will be able to help me with this?
Thanks
Best Regards
Dario Moutinho
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM

Hi Rahul,
Your solution worked. Thank you very much.
I also did not include a stored procedure into the connection that was needed in the layout.
This could have also added to the problem (for future reference).
Best Regards
Dario

Error while printing (SAP spool error)

Hi,
I have configured a printer of type 'C : Direct Operating System Call'. On printing a page, an error occurs with the following log entries
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 1775: "A null context handle was passed from the client to the host during a remote procedure call."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Please. can someone help me out here.
Thanks!
Regards,
Angad

Ok I am upgrading from R/3 46C to ECC 6.0, on the 46c system the printers are configured as follow:
Device type          HPLJ4    : HP Laserjet 4 series
Spool server          sapprod1_PRD_00       sapprod1
Device class          Standard printer
Host spool access method C: Direct operating system call
Host printer
srtroot03.startek.com\srt-dc-c4-sharp
Host name          sapprod1
On the ECC 6.0 system the printers are configured as follows:
Device Type          HPLJ4    : HP Laserjet 4 series
Spool Server          srtsapeccdev1_DEV_00
Server Description
Host               srtsapeccdev1
Device Class          Standard printer
Host Spool Access Method C: Direct operating system call
Host printer
srtroot03.startek.co\srt-dc-c4-sharp
HostName          srtsapeccdev1
The 46c system prints just fine, on the ECC 6.0 systems; I can not get the printers to work. I have made sure that the hosts file on the ECC server has the printer host address, and I get the following error back:
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 5 [
srtroot03.startek.com\srt-dc-c4-sharp]: "Access is denied."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
The access to the Printer Host is wide open, what do I need to do to resolve this issue.

Printing dunning notices using SMARTFORMS,error during parameter transfer

Hi Friends,
                I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                Can you guys help me out.
Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

you can create this text ZGA_DUN_HDR in SO10 tcode and try ...

Error during COA print out from QC21

Hi All.
I am facing an error during COA print out form Trx.QC21.
The error along with it's diagnosis is paster here.
Message no. QC138
Diagnosis
No data is printed for batch number A070030 material 000000000550000063 , plant 1001.
This can be caused by the following:
Not all data was found for a characteristic in the certificate profile that is marked as obligatory.
No requested data was found for any characteristic in the certificate profile.
System Response
The creation of the certificate profile is canceled.
If the certificate is for a delivery item, the status of the message is set to Incorrectly processed.
I have:
Created the profile
Assigned the material to it.
The same MICs are maintained in the I.Plan, Lot, Profile.
The profile is released.
Pls HELP!!!!!
With Best Regards,
Shyamal Joshi

Hi Shymal,
after reading above thread i tried the cycle and succeed only thing i used MIC as ref. char.
just ensure following thingsss.... i wil suggest u try with new data
i wil brief with T_code for other reader also.
1. activate material with batch mangt. (MM01)
2. create Batch wrt above above matl. (MSC1)
3. create Char (CT04)
4. create class (Cl02)
5. create MIC with class char. (QS21) (i think here u used copy model MIC)
6. create cert. profile (QC01 with above MIC)
7. assign matl. to above cert. profile (QC15)
8.Create Insp. Plan (QP01 with above MIC only)
9.create insp. lot (auto or QA01)
10.Do RR, UD (QA32) click on cert. (OR QC22) view Print preview by giving proper inputs.
hope this wil help.......
SANTOSH KAMBLE

1603 fatal error during installation-L7680 all in one printer

I continue to get this error because the installation finds newer software and quits. I have completed the MSI error 1603 solution 16 page paper for windows XP and was unsuccessful. I then used CCleaner to clean all registry errors, and that still didn't work.
Is there a quick fix to get past this error and install the latest scanner software on the HP site? I can print with this printer, but can not see it on the network nor use the scanner.
Best regards,
Ed

Hello @charleydog
Welcome to the forums
I read your post about the Fatal Error 1935 you're receiving when installing your Photosmart C4280 on your Windows 8.1 system.
I have located a specific document for this certain error you are seeing. I would suggest checking out the guide and trying out all of the steps it recommends to resolve the Fatal Error issue.
Fatal Error 'Error 1935. Fatal error during installation.' (MSI Error 1935) Displays During HP Softw...
I hope this helps you!
Have a terrific weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Error during printing.

Similar Messages

Maybe you are looking for